Synthesis and antimicrobial activity of new benzofuranyl‐1,3‐benzoxazines and 1,3‐benzoxazin‐2‐ones

New benzofuranyl‐1,3‐benzoxazines and 1,3‐benzoxazin‐2‐ones are synthesized in which benzofuran is coupled with 1,3‐benzoxazines and 1,3‐benzoxazin‐2‐ones through ‐CONH‐ and ‐COCH₂‐ bridges, respectively. The antimicrobial activity of these compounds is reported.     

Microwave Accelerated Polymerization of 2‐Phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine: Kinetics and Influence of End‐Groups on Glass Transition Temperature

Summary: The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine (PhOZI) with methyl tosylate (MeOTs) and butyl iodide (BuI) as initiators were performed in refluxing butyronitrile. Reaction kinetics under microwave irradiation was compared with conventional oil bath heating. The polymerization rates, under microwave irradiation, showed an acceleration by a factor of 1.8 (independently from the used initiator). The investigation of the thermal properties of the obtained poly(N‐benzoyl‐trimethyleneimine) showed the influence of molecular weight and end‐groups on the glass transition temperature.

The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine performed in refluxing butyronitrile.     

Synthesis and tautomerization of 6,7‐dihydro‐(1,2,3)‐triazolo[1,5‐a]pyrimidines

The condensation of 5‐amino‐4‐phenyl‐1,2,3‐triazole ( 1 ) with chalcones 2a‐e or 3‐dimethylamino‐propiophenone ( 4f ) leads to the 6,7‐dihydro‐(1,2,3)‐triazolo[1,5‐a]pyrimidines 3a‐f. The equilibrium of 3 and the tautomeric 4,7‐dihydro‐(1,2,3)‐triazolo[1,5‐a]pyrimidines 3′ is described.     

Synthesis and Surface Morphology of Tetraaniline‐block‐Poly(L‐lactate) Diblock Oligomers

Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.

Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects.     

Ready access to 7,8‐dihydro‐ and 1,2,3,4‐tetrahydro‐1,6‐naphthyridine‐5(6H)‐ones from simple pyridine precursors

Short pathways are described for the synthesis of a representative example of each of the 7,8‐dihydro‐and 1,2,3,4‐tetrahydro‐1,6‐naphthyridine‐5(6H)‐one ring systems from simple pyridine precursors. An attempted synthesis of the related 4,6‐dihydro‐1,6‐naphthyridin‐5(1H)‐one ring system from a common intermediate was unsuccessful.     

Poly(amidoamine)s with 2‐Dithiopyridine Side Substituents as Intermediates to Peptide–Polymer Conjugates

Cystamine, when employed as a cross‐linking agent, leads to poly(amidoamine) networks, which on reaction with 2,2′‐dithiodipyridine turn into linear poly(amidoamine)s with side dithiopyridyl groups that easily undergo exchange reactions with reduced L ‐glutathione, a model thiol‐containing biologically active peptide. The resultant products represent the first examples of soluble poly(amidoamine)–peptide conjugates in which the peptide moieties are linked to the polymer chain by S S bonds stable in blood, but cleavable inside cells.

     

Synthesis of Novel Thermo‐ and pH‐Responsive Poly(L‐lysine)‐Based Copolymer and its Micellization in Water

A series of novel temperature and pH responsive block copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(L ‐lysine) (PLL) were synthesized. The effect of pH and the length of PLL on the lower critical solution temperature (LCST) of PNIPAM, and the self‐assembly of these PLL‐based copolymers induced by temperature and pH changes were investigated by the cloud point method, dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM). These PNIPAM‐b‐PLL copolymers can self‐assemble into micelle‐like aggregates with PNIPAM as the hydrophobic block at acidic pH and high temperatures; and at alkaline pH and low temperatures, they can self‐assemble into particles with PLL as the hydrophobic block. The copolymers may have potential applications in biotechnological and biomedical areas as drug release carriers.

     

Chitinase‐Catalyzed Synthesis of a Chitin‐Xylan Hybrid Polymer: A Novel Water‐Soluble β(1 → 4) Polysaccharide Having an N‐Acetylglucosamine‐Xylose Repeating Unit

Summary: A chitin‐xylan hybrid polysaccharide having β(1 → 4)‐linked alternating structure of N‐acetyl‐D ‐glucosamine and D ‐xylose was synthesized via chitinase‐catalyzed polymerization. An oxazoline derivative of D ‐xylosyl‐β(1 → 4)‐N‐acetyl‐D ‐glucosamine ( 1 ) was effectively polymerized by the catalysis of chitinase from Bacillus sp., giving rise to a water‐soluble chitin‐xylan hybrid polysaccharide ( 2 ) in good yields. Molecular weights ( ) of 2 reached 1 500, which corresponds to 8–10 saccharide units.

A chitin‐xylan hybrid polysaccharide ( 2 ) synthesized via chitinase‐catalyzed polymerization.     

Synthesis and antibacterial studies of 6‐aryl‐2,2a‐dihydro‐naphtho‐[2′,1′‐5,6]pyrano[4,3‐e][1,2,4]triazolo[3,4‐b][1,3,4]thiadiazine and its derivatives

Chemoselective synthesis of novel hetero cyclopenta[b]chrysene derivatives, namely, 6‐Aryl‐2,2a‐dihydro‐naphtho[2′,1′‐5,6]pyrao[4,3‐e][1,2,4]triazolo[3,4‐b][1,3,4]thiadiazine ( 4a‐j ) under neutral condition has been described. These molecules exhibited good to excellent anti‐bacterial activities.     

Synthesis of 5,6‐dihydrothieno(and furo)pyrimidines bearing an active methine group at the 4‐position

The reactions of 2‐benzamido‐4,5‐dihydro‐3‐thiophene(and ‐3‐furan)carbonitriles ( 1a‐c and 4a‐c ) with ethyl acetoacetate in the presence of tin(IV) chloride and triethylamine provided the corresponding ethyl 2‐(5,6‐dihydro‐2‐phenylthieno(and furo)[2,3‐d]pyrimidin‐4‐yl)‐3‐oxobutanoates ( 2a‐c and 9a‐c ). Similarly, compounds 1a‐c and 4a‐c reacted with dialkyl malonates to give the corresponding dialkyl(5,6‐dihydro‐2‐phenylthieno(and furo)[2,3‐d]pyrimidin‐4‐yl)propanedioates ( 5a‐c, 6a‐c, 10a‐c and 11a‐c ).     

The reaction of 3,4‐diamino‐1,2,5‐oxadiazoles with formaldehyde

The compounds 5,6‐dihydro‐4H‐imidazo[4,5‐c][1,2,5]oxadiazole ( 3a , R?H), 4,6,10,12‐tetramethyl‐5,6,11,12‐tetrahydro‐4H,10H‐bis(1,2,5)oxadiazolo[3,4‐d:3′,4′‐I][1,3,6,8]tetraazecine ( 4b , R?CH₃), N³,N³′‐methylenebis‐3,4‐diamino‐1,2,5‐oxadiazole ( 5a , R?H) and N³,N³′‐methylenebis(N,N′‐dimethyl‐3,4‐diamino‐1,2,5‐oxadiazolee) ( 5b , R?CH₃) were synthesized from the reaction of formaldehyde with 3,4‐diamino‐1,2,5‐oxadiazole and N,N′‐3,4‐dimethylamino‐1,2,5‐oxadiazole in an acetonitrile.     

A facile synthesis of 2‐substituted thieno[3′,2′‐5,6]‐pyrido[4,3‐d]pyrimidin‐4(3H)‐ones

The thienopyridine derivative 2 , obtained from reaction of acetoacetic ester with 1 in the presence of tin tetrachloride, was treated with triphenylphosphine in hexachloroethane and Et₃N to give iminophosphorane 3 . Iminophosphorane 3 reacted with phenyl isocyanate to give carbodiimide 4 , which was further treated with phenols or ethenol to produce 2‐substituted 5,8,9‐trimethyl‐3‐phenyl‐thieno[3′,2′‐5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐ones 5 in presence of catalytic amount of K₂CO₃ or EtONa. The structures of compounds 5 were confirmed by ¹H NMR, IR, MS, and elemental analysis.     

An efficient synthesis of new pyrido[4′,3′:4,5]thieno[2,3‐d]‐pyrimidin‐4(3H)‐one derivatives

The carbodiimides 5 , obtained from reactions of iminophosphorane 4 with aromatic isocyanates, reacted with amines, phenols or ROH to give 2‐substituted 5,6,7,8‐tetrahydropyrido[4′,3′:4,5]thieno[2,3‐d]‐pyrimidin‐4(3H)‐one 7 in the presence of catalytic amount of sodium alkoxide or solid potassium carbonate in satisfactory yields.     

Soluble Polyimides from a New Dianhydride: 5′‐tert‐Butyl‐m‐terphenyl‐3,4,3″,4″‐tetracarboxylic Acid Dianhydride

A novel tert‐butyl‐containing dianhydride was prepared from readily available reagents. It was reacted with various aromatic diamines to prepare a set of polyimides containing tert‐butyl pendent groups. The resulting polyimides exhibit high molecular weights (high inherent viscosity), and a combination of desirable properties, such as good solubility in aprotic amide solvents and cresols, high glass transition temperatures (up to 320 °C), high thermal resistance, film‐forming capability and good mechanical properties.

     

Covalently Scaffolded Inter‐π‐System Orientations in π‐Conjugated Polymers and Small Molecule Models

Organic π‐conjugated polymers have emerged as one of the most fascinating classes of materials as they have found utility in a host of plastic electronics technologies. The distance between π‐systems and their relative orientation dictate energy/charge transfer, conductivity, and photophysical properties of these materials in bulk. This Feature Article discusses π‐conjugated polymers and model compounds in which specific inter‐π‐system interactions are covalently enforced and the effect that the scaffolding has on optoelectronic properties.

     

Synthesis of new heteroaromatic nitrogen ligands: Pyrimido‐[4″,5″:4′,5′]‐thieno[3′,2′:4,5]thieno[3,2‐d]pyrimidines and 1,2,3‐triazine[4″,5″:4′,5′]thieno[3′,2′:4,5]thieno[3,2‐d]‐1,2,3‐triazines

An efficient one‐pot access for the synthesis of the previously unreported tetracyclic fused pyrimido‐[4″,5″:4′,5′]thieno[3′,2′:4,5]thieno[3,2‐d]pyrimidine ( 3 ) and 1,2,3‐triazine[4″,5″:4′,5′]thieno‐[3′,2′:4,5]thieno‐[3,2‐d]‐1,2,3‐triazine ( 5 ) heteroaromatic nitrogen ligands is described. The title compounds 3 and 5 were obtained from 3,4‐diaminothieno[2,3‐b]thiophene‐2,5‐dicarbonitrile and phosgeniminium chloride and sodium nitrite/HCl, respectively. Substituted condensed thieno[2,3‐b]thiophene derivatives 4 and 6 were synthesized by nucleophilic displacement of the chloroderivatives 3 and 5 .     

Synthesis and in vitro antiproliferative activity of new substituted benzo[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines

The synthesis of new planar benzo[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidine derivatives, carrying different side groups in the 2 position, is described. The novel substituted pyrimidines were obtained by reaction of the key intermediate 3‐dimethylamino methylen‐7‐methoxy‐2,3‐dihydrobenzo[3′,2′:5,6]thiopyran‐4(4H)‐one, characterized by a reactive group adjacent to the C?O function, with the suitable binucleophile amidines in a basic medium. All the new compounds were evaluated for the antiproliferative ability by an in vitro assay on two human tumour cell lines (HL‐60 and HeLa), and the 2‐phenyl substituted derivative showed the capacity to inhibit cell growth on HL‐60. Linear flow dichroism measurements indicated the inability to form a molecular complex with DNA.     

Surface‐Imprinted,Thermosensitive, Core‐Shell Nanosphere for Molecular Recognition

Summary: The D ‐glucose imprinted core‐shell nanosphere with an average size of ≈60 to 80 nm showed a significant preference for the binding of D ‐glucose than the non‐imprinted core‐shell nanosphere. Depending on temperature, the binding site in the shell with N‐isopropylacrylamide oligomer underwent a significant change in binding affinity. In addition, the D ‐glucose imprinted core‐shell nanosphere showed a two times higher affinity for D ‐glucose than L ‐glucose, suggesting chiral recognition of the binding site. The core‐shell nanosphere reported here is a good biomimetic model system with a well‐defined morphology, high surface area, and variable binding affinity through a change in temperature.

D ‐glucose imprinted core‐shell nanospheres showed excellent binding over the non‐imprinted core‐shell nanosphere.     

One‐Pot Difunctionalization of Poly(ω‐pentadecalactone) with Thiol‐Thiol or Thiol‐Acrylate Groups,Catalyzed by Candida antarctica Lipase B

Summary: An enzymatic one‐pot procedure has been developed for the synthesis of difunctional polyesters containing terminal thiols and acrylates. Candida antarctica lipase B was used as a catalyst for the ring‐opening polymerization of ω‐pentadecalactone. The polymerization was initiated with 6‐mercaptohexanol, then terminated with γ‐thiobutyrolactone or vinyl acrylate to create two types of difunctional polyesters with a very high content of thiol‐thiol or thiol‐acrylate end‐groups.

Difunctionalization of poly‐PDL.     

Synthesis and characterization of 4‐aryl‐5‐(1‐aryl‐2‐methyl‐2‐nitropropyl)‐1,2,3‐selenadiazoles

The synthesis of a new set of selenadiazoles, 4‐aryl‐5‐(1‐aryl‐2‐methyl‐2‐nitropropyl)‐1,2,3‐selenadiazoles ( 4 ) derived from 2‐[4‐methyl‐4‐nitro‐1,3‐diarylpentylidene]‐1‐hydrazinecarboxamide ( 3 ) has been reported. THF has been found to be the solvent of choice for this reaction. Structural features of 3 and 4 have been analyzed by NMR and X‐ray techniques.