Three‐Component Reaction for Construction of Spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and Spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines]

The three‐component reaction of thiazole (benzothiazole), dialkyl but‐2‐ynedioate, and isatinylidene malononitriles in toluene at 110–120°C in a sealed tube afforded a mixture of cis/trans‐isomers of functionalized diastereoisomeric spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines] in good yields. Both cis‐isomers and trans‐isomers were successfully separated out and fully characterized with spectroscopy and single crystal determination. Under similar conditions, the three‐component reaction containing 2‐(1,3‐dioxo‐1H‐inden‐2(3H)‐ylidene)malononitrile resulted in spiro[indene‐2,7′‐thiazolo[3,2‐a]pyridine] derivatives.     

Photoresponsive Switches at Surfaces Based on Supramolecular Functionalization with Azobenzene–Oligoglycerol Conjugates

The synthesis, supramolecular complexation, and switching of new bifunctional azobenzene–oligoglycerol conjugates in different environments is reported. Through the formation of host–guest complexes with surface immobilized β‐cyclodextrin receptors, the bifunctional switches were coupled to gold surfaces. The isomerization of the amphiphilic azobenzene derivatives was examined in solution, on gold nanoparticles, and on planar gold surfaces. The wettability of functionalized gold surfaces can be reversibly switched under light‐illumination with two different wavelengths. Besides the photoisomerization processes and concomitant effects on functionality, the thermal cis to trans isomerization of the conjugates and their complexes was monitored. Thermal half‐lives of the cis isomers were calculated for different environments. Surprisingly, the half‐lives on gold nanoparticles were significantly smaller compared to planar gold surfaces.     

trans–cis Photoisomerization of Azobenzene‐Conjugated Dithiolato‐Bipyridine Platinum(II) Complexes: Extension of Photoresponse to Longer Wavelengths and Photocontrollable Tristability

Azobenzene derivatives modified with dithiolato‐bipyridine platinum(II) complexes were synthesized, revealing their highly extended photoresponses to the long wavelength region as well as unique photocontrollable tristability. The absorptions of trans‐ 1 and trans‐ 2 with one azobenzene group on the dithiolene and bipyridine ligands, respectively, cover the range from 300 to 700 nm. These absorptions are ascribed, by means of time‐dependent (TD)DFT calculations, to transitions from dithiolene(π) to bipyridine(π*), namely, interligand charge transfer (CT), π–π*, and n–π* transitions of the azobenzene unit, and π–π* transitions of the bipyridine ligand. In addition, only trans‐ 1 shows distinctive electronic bands, assignable to transitions from the dithiolene(π) to azobenzene(π*), defined as intraligand CT. Complex 1 shows photoisomerization behavior opposite to that of azobenzene: trans‐to‐cis and cis‐to‐trans conversions proceed with 405 and 312 nm irradiation, which correspond to excitation with the intraligand CT, and π–π* bands of the azobenzene and bipyridine units, respectively. In contrast, complex 2 shows photoisomerization similar to that of azobenzene: trans‐to‐cis and cis‐to‐trans transformations occur with 365 and 405 nm irradiation, respectively. Irradiation at 578 nm, corresponding to excitation of the interligand CT transitions, results in cis‐to‐trans conversion of both 1 and 2 , which is the longest wavelength ever reported to effect the photoisomerization of the azobenzene group. The absorption and photochromism of 4 , which has azobenzene groups on both the dithiolato and bipyridine ligands, have characteristics quite similar to those of 1 and 2 , which furnishes 4 with photocontrollable tristability in a single molecule using light at 365, 405, and 578 nm. We also clarified that 1 and 2 have high photoisomerization efficiencies, and good thermal stability of the cis forms. Complexes 3 and 5 have almost the identical photoresponse to those of their positional isomers, complexes 2 and 4 .     

Photoisomerization of trans‐2‐[4′‐(Dimethylamino)styryl]benzothiazole

Photoreaction of trans‐2‐[4′‐(dimethylamino)styryl]benzothiazole (t‐DMASBT) under direct irradiation has been investigated in dioxane, chloroform, methanol and glycerol to understand the mechanism of photoisomerization. Contrary to an earlier report, isomerization takes place in all these solvents including glycerol. The results show that restriction on photoisomerization leads to the increase in fluorescence quantum yield in glycerol. The results are consistent with the theoretically simulated potential energy surface reported earlier using time‐dependent density functional theory (TDDFT) calculations. DFT calculations on cis isomers under isolated condition have suggested that cis‐B conformer is more stable than cis‐A conformer due to hydrogen‐bonding interaction. In the ground state, cis‐DMASBT is predominantly present as cis‐B. The fluorescence spectra of the irradiated t‐DMASBT suggested that photoisomerization follows not the adiabatic path as proposed by Saha et al., but the nonadiabatic path.     

Synthesis,Crystal Structures and Spectrothermal Characterization of a Heptacoordinated Dimeric Salicylato Cadmium(II) Complex with 2,2′‐Azobispyridine (abpy), (µ‐abpy)[Cd(Hsal)2(abpy)]2

µ‐2,2′‐Azobispyridinebis[2,2′‐azobispyridinesalicylato(O)salicylato(O,O′) cadmium(II)], (µ‐abpy)[Cd(Hsal)₂(abpy)]₂ ( I ) was synthesized and characterized by IR and UV/ Vis spectroscopy, thermal analysis, and X‐ray diffraction techniques. Two abpy ligands and two salicylato ligands coordinate to the Cd²⁺ ion in a monocapped trigonal‐prismatic arrangement. The capping atom is the N3 atom. One of the two abpy ligands behaves as a “s‐frame” bridging ligand and adopts a s‐cis/ E/ s‐cis conformation, whereas the other one adopts as a s‐cis/ E/ s‐trans conformation. One of the two salicylato ligands acts as a monodentate ligand, which coordinates with the carboxylate oxygen atom, whereas the other one adopts bidentate coordination through two carboxylate oxygen atoms. The hydroxy groups of salicylato ligands, which coordinate in a monodentate fashion, are disordered over two positions, with occupancies of 0.52 for group A and 0.48 for group B. The decomposition reaction takes place in the temperature range 20–1000 °C under nitrogen. Thermal decomposition of the title complex proceeds in two stages.     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Stimuli-responsive polymers. III. Poly(aryl ether ketone amide)s with reversible trans- ↔ cis-4,4′-azobenzene and fixed 2,2′-binaphthyl kinking elements in the main chain

The low-temperature polycondensation of trans-azobenzene-4,4′-dicarbonyl chloride with (S)-(−)-1,1′-binaphthyl-2,2′-diamine and/or 1,4-bis(3-aminophenoxy-4′-benzoyl)benzene afforded a new series of poly(aryl ether ketone amide)s with both fixed and photoinducible kinking elements positioned randomly along the main chain. In their lower energy, trans-azobenzene configurations, the orange, film-forming materials were amorphous, highly tractable, and thermally stable under air or nitrogen up to about 420°C. Variants endowed with higher loadings of the bent binaphthyl monomer were soluble in a variety of organic solvent media including THF and acetone. The introduction of cis-azobenzene backbone kinks into these materials was carried out by irradiating the polymer solutions with near-UV light. Up to 70% of the azobenzene moieties in these polymers were capable of assuming the higher energy cis-configuration, thus greatly increasing the number of bent or kinked sites positioned along each polymer backbone. In solution, reverse cis → trans isomerization reactions were triggered thermally and were quantitatively tracked by both optical absorbance and ¹H NMR spectroscopies. Activation parameters calculated for cis → trans reorganization of the polymer backbone were not dependent upon the chemical composition or molecular weight of the polymers but did exhibit a small dependence upon the nature of the solvent medium used to conduct the isomerization experiment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2827–2837, 1998     

Factors Affecting DNA–DNA Interstrand Cross‐Links in the Antiparallel 3′–3′ Sense: A Comparison with the 5′–5′ Directional Isomer

Reported herein is a study of the unusual 3′–3′ 1,4‐GG interstrand cross‐link (IXL) formation in duplex DNA by a series of polynuclear platinum anticancer complexes. To examine the effect of possible preassociation through charge and hydrogen‐bonding effects the closely related compounds [{trans‐PtCl(NH₃)₂}₂(μ‐trans‐Pt(NH₃)₂{NH₂(CH₂)₆NH₂}₂)]⁴⁺ (BBR3464, 1 ), [{trans‐PtCl(NH₃)₂}₂(μ‐NH₂(CH₂)₆NH₂)]²⁺ (BBR3005, 2 ), [{trans‐PtCl(NH₃)₂}₂(μ‐H₂N(CH₂)₃NH₂(CH₂)₄)]³⁺ (BBR3571, 3 ) and [{trans‐PtCl(NH₃)₂}₂{μ‐H₂N(CH₂)₃‐N(COCF₃)(CH₂)₄}]²⁺ (BBR3571‐COCF₃, 4 ) were studied. Two different molecular biology approaches were used to investigate the effect of DNA template upon IXL formation in synthetic 20‐base‐pair duplexes. In the “hybridisation directed” method the monofunctionally adducted top strands were hybridised with their complementary 5′‐end labelled strands; after 24 h the efficiency of interstrand cross‐linking in the 5′–5′ direction was slightly higher than in the 3′–3′ direction. The second method involved “postsynthetic modification” of the intact duplex; significantly less cross‐linking was observed, but again a slight preference for the 5′–5′ duplex was present. 2D [¹H, ¹⁵N] HSQC NMR spectroscopy studies of the reaction of [¹⁵N]‐ 1 with the sequence 5′‐d{TATACATGTATA}₂ allowed direct comparison of the stepwise formation of the 3′–3′ IXL with the previously studied 5′–5′ IXL on the analogous sequence 5′‐d(ATATGTACATAT)₂. Whereas the preassociation and aquation steps were similar, differences were evident at the monofunctional binding step. The reaction did not yield a single distinct 3′–3′ 1,4‐GG IXL, but numerous cross‐linked adducts formed. Similar results were found for the reaction with the dinuclear [¹⁵N]‐ 2 . Molecular dynamics simulations for the 3′–3′ IXLs formed by both 1 and 2 showed a highly distorted structure with evident fraying of the end base pairs and considerable widening of the minor groove.     

Nanoscale Chemical Imaging of Reversible Photoisomerization of an Azobenzene‐Thiol Self‐Assembled Monolayer by Tip‐Enhanced Raman Spectroscopy

An understanding of the photoisomerization mechanism of molecules bound to a metal surface at the molecular scale is required for designing photoswitches at surfaces. It has remained a challenge to correlate the surface structure and isomerization of photoswitches at ambient conditions. Herein, the photoisomerization of a self‐assembled monolayer of azobenzene‐thiol molecules on a Au surface was investigated using scanning tunneling microscopy and tip‐enhanced Raman spectroscopy. The unique signature of the cis isomer at 1525 cm^?1 observed in tip‐enhanced Raman spectra was clearly distinct from the trans isomer. Furthermore, tip‐enhanced Raman images of azobenzene thiols after ultraviolet and blue light irradiation are shown with nanoscale spatial resolution, demonstrating a reversible conformational change. Interestingly, the cis isomers of azobenzene‐thiol molecules were preferentially observed at Au grain edges, which is confirmed by density functional theory.     

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil,a cyclouridine nucleoside with a C4′‐endo furanosyl conformation

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil, C₁₃H₁₄N₂O₇, was obtained by refluxing 2′,3′‐O‐(methoxymethylene)uridine in acetic anhydride. The structure exhibits a nearly perfect C4′‐endo (⁴E) conformation. The best four‐atom plane of the five‐membered furanose ring is O—C—C—C, involving the C atoms of the fused five‐membered oxazolidine ring, and the torsion angle is only −0.4 (2)°. The oxazolidine ring is essentially coplanar with the six‐membered uracil ring [r.m.s. deviation = 0.012 (5) Å and dihedral angle = −3.2 (3)°]. The conformation at the exocyclic C—C bond is gauche–trans which is stabilized by various C—H...π and C—O...π interactions.     

5′‐Allyl‐2′‐benzoyloxy‐3′‐methoxy‐4‐nitroazobenzene

The structure of the title compound, 4‐allyl‐2‐methoxy‐6‐[(4‐nitrophenyl)diazenyl]phenyl benzoate, C₂₃H₁₉N₃O₅, displays the characteristic features of azobenzene derivatives. The azobenzene moiety of the molecule has a trans configuration and in this moiety, average C—N and N=N bond lengths are 1.441 (3) and 1.241 (3) Å, respectively.     

Spectroscopic,Thermal, and Structural Studies of Two New Co‐Crystals of [4,4′‐Bithiazole]‐2,2′‐diamine

Two new 2 : 1 co‐crystals based on [4,4′‐bithiazole]‐2,2′‐diamine (=2,2′‐diamino‐4,4′‐bithiazole (DABTZ)) with 2,2′‐bipyridine (bipy) and benzo‐18‐crown‐6 (bk) were synthesized by slow‐evaporation method in MeOH. These co‐crystals were characterized by means of elemental analysis, and IR, and ¹H‐ and ¹³C‐NMR spectroscopy. Also, thermal analyses under air atmosphere and X‐ray crystallography have been performed on these structures. X‐Ray single‐crystal analyses revealed that these networks contain large vacant voids. These structures, [(DABTZ)₂(bipy)] and [(DABTZ)₂(bk)(MeOH)], crystallized in monoclinic and triclinic forms with space groups of P2₁/c and P , respectively. The self‐assembly of these compounds in the solid state is likely caused by both H‐bonding and π? π stacking.     

Molecular Switching: A Fully Reversible,Optically Active Photochemical Switch Based on a Tetraethynylethene‐1,1′‐Binaphthalene Hybrid System

The synthesis, characterization, and physical properties of a novel, fully reversible, light‐driven molecular switch, (R,R)‐ 1 /(R,R)‐ 2 , based on a tetraethynylethene‐1,1′‐binaphthalene hybrid system are presented. trans‐Configured (R,R)‐ 1 was synthesized in 57% yield by Stille cross‐coupling between stannylated tetraethynylethene 3 and 3‐iodo‐1,1′‐binaphthalene derivative (R)‐ 4 (cf. Scheme 2). The cis‐isomer (R,R)‐ 2 was prepared from (R,R)‐ 1 by photoisomerization. X‐Ray crystal‐structure analyses were obtained for both cis‐ and trans‐forms of the photoswitch (Figs. 1 and 2). In the crystalline state, molecules of the cis‐isomer (R,R)‐ 2 exhibit intramolecular edge‐to‐face (C−H⋅⋅⋅π) interactions between naphthalene rings of the two 1,1‐binaphthalene moieties (Fig. 3). The switching properties were investigated by electronic absorption spectroscopy (Table and Fig. 4): irradiation at λ=398 nm converts trans‐isomer (R,R)‐ 1 into cis‐isomer (R,R)‐ 2 , whereas switching occurs in the opposite direction upon irradiation at λ=323 nm. No thermal interconversion between the two isomers was observed in CH₂Cl₂ at room temperature over a period of 2 – 3 months, and the system possesses good resistance against photofatigue (Fig. 5). Investigations of the circular dichroism of (R,R)‐ 1 and (R,R)‐ 2 in CH₂Cl₂ solution showed that the chiral binaphthalene moieties induce a weak Cotton effect in the achiral tetraethynylethene core (Fig. 6). System (R,R)‐ 1 /(R,R)‐ 2 represents one of the rare switches allowing two‐way photochemical interconversions, not perturbed by thermal‐isomerization pathways.     

Diorganotin(IV) compounds derived from n‐methyl‐2,2′‐diphenolamine and 2,2′‐diphenolamine

The reaction of N‐methyl‐2,2′‐diphenolamine 1 and 2,2′‐diphenolamine 2 with some diorganotin(IV) oxides [R1/2SnO: R¹ = Me, n‐Bu, t‐Bu and Ph] led to the syntheses of diorgano[N‐methyl‐2,2′‐diphenolato‐O,O′,N]tin (IV) 3–6 and diorgano[2,2′‐diphenolato‐O,O′,N]tin (IV) 7–9 . All compounds (except 7 ) studied in this work were characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, infrared, and mass spectroscopy. Their ¹¹⁹Sn NMR data show that the tin atom is tetracoordinated in CDCl₃ but penta and hexacoordinated in DMSO‐d₆. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 133–139, 1999     

A new route for the synthesis of phosphate esters: 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide

Podand‐type ligands are an interesting class of acyclic ligands which can form host–guest complexes with many transition metals and can undergo conformational changes. Organic phosphates are components of many biological molecules. A new route for the synthesis of phosphate esters with a retained six‐membered ring has been used to prepare 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, C₆H₄{O[cyclo‐P(O)OCH₂CMe₂CH₂O]}₂ or C₁₆H₂₄O₈P₂, (1), 2‐[(2′‐hydroxybiphenyl‐2‐yl)oxy]‐5,5‐dimethyl‐1,3,2‐dioxaphosphinane 2‐oxide, [cyclo‐P(O)OCH₂CMe₂CH₂O](2,2′‐OC₆H₄–C₆H₄OH), (2), and oxybis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, O[cyclo‐P(O)OCH₂CMe₂CH₂O]₂, (3). Compound (1) is novel, whereas the results for compounds (2) and (3) have been reported previously, but we record here our results for compound (3), which we find are more precise and accurate than those currently reported in the literature. In (1), two cyclo‐P(O)OCH₂CMe₂CH₂O groups are linked through a catechol group. The conformations about the two catechol O atoms are quite different, viz. one C—C—O—P torsion angle is −169.11 (11)° and indicates a trans arrangement, whereas the other C—C—O—P torsion angle is 92.48 (16)°, showing a gauche conformation. Both six‐membered POCCCO rings have good chair‐shape conformations. In both the trans and gauche conformations, the catechol O atoms are in the axial sites and the short P=O bonds are equatorially bound.     

Flip‐type disorder in 3‐substituted 2,2′:5′,2′′‐terthiophenes

In the crystal structures of four thiophene derivatives, (E)‐3′‐[2‐(anthracen‐9‐yl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₈H₁₈S₃, (E)‐3′‐[2‐(1‐pyrenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₃₀H₁₈S₃, (E)‐3′‐[2‐(3,4‐dimethoxyphenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₂H₁₈O₂S₃, and (E,E)‐1,4‐bis[2‐(2,2′:5′,2′′‐terthiophen‐3′‐yl)ethenyl]‐2,5‐dimethoxybenzene, C₃₆H₂₆O₂S₆, at least one of the terminal thiophene rings is disordered and the disorder is of the flip type. The terthiophene fragments are far from being coplanar, contrary to terthiophene itself. The central C—C=C—C fragments are almost planar but the bond lengths suggest slight delocalization within this fragment. The crystal packing is determined by van der Waals interactions and some weak, relatively short, C—H...S and C—H...π directional contacts.     

Uranium–Carbene–Imido Metalla‐Allenes: Ancillary‐Ligand‐Controlled cis‐/trans‐Isomerisation and Assessment of trans Influence in the R2C=UIV=NR′ Unit (R=Ph2PNSiMe3; R′=CPh3)

Uranium(IV)–carbene–imido complexes [U(BIPM^TMS)(NCPh₃)(κ²‐N,N′‐BIPY)] ( 2 ; BIPM^TMS=C(PPh₂NSiMe₃)₂; BIPY=2,2‐bipyridine) and [U(BIPM^TMS)(NCPh₃)(DMAP)₂] ( 3 ; DMAP=4‐dimethylamino‐pyridine) that contain unprecedented, discrete R₂C=U=NR′ units are reported. These complexes complete the family of E=U=E (E=CR₂, NR, O) metalla‐allenes with feasible first‐row hetero‐element combinations. Intriguingly, 2 and 3 contain cis‐ and trans‐C=U=N units, respectively, representing rare examples of controllable cis/trans isomerisation in f‐block chemistry. This work reveals a clear‐cut example of the trans influence in a mid‐valent uranium system, and thus a strong preference for the cis isomer, which is computed in a co‐ligand‐free truncated model—to isolate the electronic trans influence from steric contributions—to be more stable than the trans isomer by approximately 12 kJ mol^?1 with an isomerisation barrier of approximately 14 kJ mol^?1.     

Coordination‐Driven Macrocyclization for Locking of Photo‐ and Thermal cis→trans Isomerization of Azobenzene

Both trans and cis isomers of azobenzene‐linked bis‐terpyridine ligand L1 were incorporated in rigid macrocycles linked by Fe^II(tpy)₂ (tpy: terpyridine) units. The complex of the longer trans‐ L1 is dinuclear [(trans‐ L1 )₂ ? Fe^II₂], whereas the complex of the shorter cis‐ L1 is mononuclear [cis‐ L1? Fe^II]. The complex cis‐ L1? Fe^II was not only thermally stable but also photochemically inactive. These results indicate a perfectly locked state of cis‐azobenzene. The stable macrocyclic structure of cis‐ L1? Fe^II causes locking of the isomerization. To the best of our knowledge, this is first example of dual locking of photo‐ and thermal isomerization of cis‐azobenzene.     

Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

Observation of Collective Photoswitching in Free‐Standing TATA‐Based Azobenzenes on Au(111)

Light‐induced transitions between the trans and cis isomer of triazatriangulenium‐based azobenzene derivatives on Au(111) surfaces were observed directly by scanning tunneling microscopy, allowing atomic‐scale studies of the photoisomerization kinetics. Although the azobenzene units in these adlayers are free‐standing and spaced at uniform distances of 1.26 nm, their photoswitching depends on the isomeric state of the surrounding molecules and, specifically, is accelerated by neighboring cis isomers. These collective effects are supported by ab initio calculations indicating that the electronic excitation preferably localizes on the n–π* state of trans isomers with neighboring cis azobenzenes.