Spectrophotometric Characteristics of New Pyridylindolizine Derivatives Solutions

Three new pyridylindolizine derivatives, 1, 2, 3-tricarbometoxi-7-(4-pyridyl)-pyrrolo[1, 2-a]pyridine (I), 1,2-dicarboethoxy-3-(4-bromobenzoyl)-7-(4-pyridyl)-pyrrolo[1,2-a]pyridine (II) and its isomer 1,2-dicarboethoxy-3- (4-bromobenzoyl) -5- (2-pyridyl) -pyrrolo[1, 2-a]pyridine (III) have been investigated in different solutions by UV-VIS absorption, steady-state, and time-resolved fluorescence methods. The effects of the substituent and solvent on the spectroscopic properties have been demonstrated. The fluorescence decay data could be fitted to a single-exponential function. The lifetime values are higher in protic polar than in aprotic apolar solvents for compound I. In the case of compounds II and III the fluorescence intensities and lifetimes are very low, with the exception of III in aprotic solvents. The absorption and fluorescence properties of the compounds showed a solvent dependence.     

Fluorescent Carbon Dots Capped with PEG<Subscript>200</Subscript> and Mercaptosuccinic Acid

The synthesis and functionalization of carbon nanoparticles with PEG₂₀₀ and mercaptosuccinic acid, rendering fluorescent carbon dots, is described. Fluorescent carbon dots (maximum excitation and emission at 320 and 430 nm, respectively) with average dimension 267 nm were obtained. The lifetime decay of the functionalized carbon dots is complex and a three component decay time model originated a good fit with the following lifetimes: τ ₁ = 2.71 ns; τ ₂ = 7.36 ns; τ ₃ = 0.38 ns. The fluorescence intensity of the carbon dots is affected by the solvent, pH (apparent pK _a of 7.4 ± 0.2) and iodide (Stern-Volmer constant of 78 ± 2 M⁻¹).     

A new coumarin laser dye 3-(benzothiazol-2-yl)-7-hydroxycoumarin

The electronic absorption, and emission spectra as well as fluorescence quantum yield of 3-(benzothiazol-2-yl)-7-hydroxycoumarin (BTHC) were measured in different solvents and are affected by solvent polarity (Δf). The deprotonation of BTHC by triethylamine is a reversible process. BTHC is relatively photostable, the quantum yield of photodecomposition (φ_c) was found to be 2×10⁻⁴ and 2.7×10⁻⁴ in EtOH and DMF, respectively. The fluorescence lifetimes of BTHC were measured in the absence and in the presence of molecular oxygen and were found to be 2.82 and 2.78 ns, respectively. BTHC acts as good laser dye upon pumping with nitrogen laser (λ_ex=337.1 nm) in ethanol and gives laser emission with maxima at 508 and 522 nm.     

Synthesis and luminescent study of diphosphine-Pt-disulfide complexes for OLED

Three novel diphosphine-Pt-disulfide complexes were synthesized and characterized by ¹H NMR, mass spectrometry and elemental analysis. As a diphosphine, 1,8-bis(diphenylphosphino)naphthalene (dppn), rac-2,2^′-bis(diphenylphosphino)-1,1^′-binaphthyl (dppbn), or 1,1^′-bis(diphenylphosphino)ferrocene (dppf) was employed and chelated to the Pt(II) center. As an anion, p-tolylsulfide (4-SC₆H₄CH₃) was incorporated to Pt(II) center subsequently, yielding (dppn)Pt(4-SC₆H₄CH₃)₂ (1), (dppbn)Pt(4-SC₆H₄CH₃)₂ (2), or (dppf)Pt(4-SC₆H₄CH₃)₂ (3). The photophysical properties of the resulting Pt complexes were investigated with UV–VIS spectroscopy, photoluminescence (PL) spectroscopy and transient PL. Charge Transfer absorptions between the metal and the ligand of 2 and 3 were observed at 320–350 nm in the UV–VIS spectra whereas such noticeable absorption was not observed in 1. The solid films of 1 and 3 showed luminescence at 600 and 580 nm, respectively, while that of 2 did not show emission at the room temperature. The complex 3 exhibited two excited state lifetimes, 23 and 125 ns, at room temperature, and the weighting factor for 125 ns state is only 10% of that for 23 ns one. It means that the prominent luminescence was fluorescence and the intersystem crossing through LS coupling is relatively weak.     

Investigation of Solvent Effects on Photophysical Properties of New Aminophthalimide Derivatives-Based on Methanesulfonate

Novel aminophthalimide derivatives were synthesized starting from (3aR,7aS)-2-(2-hydroxypropyl)-3a,4,7,7a–tetrahydro-1H-isoindole-1,3(2H)-dione (9) , and solvent effects on the photo-physical properties of these newly synthesized aminophthalimide derivatives (compounds 14 and 15) were investigated using UV-Vis absorption spectroscopy, steady-state and time-resolved fluorescence measurements. Both absorption and fluorescence spectra exhibited bathochromic shift with the increased polarity of the solvents for both molecules. Solute-solvent interactions were analyzed using the Lippert-Mataga and Bakhshiev polarity functions, and Kamlet-Taft and Catalan multiple linear regression approaches. The results revealed that these two molecules experienced specific interactions. Furthermore, photo-physical parameters were calculated for both molecules in all of the solvents, such as the fluorescence quantum yield, fluorescence lifetime, radiative (k_r) and non-radiative (k_nr) rate constant values. It was observed that the fluorescence quantum yield values decreased linearly with increasing solvent polarity. This study proved the new dyes including isopropyl methanesulfonate group displayed different behavior from previous studies of aminophthalimide derivatives in water. It was recommended that these new dyes having interesting properties by changing solvent can be used various applications such as environmentally sensitive fluorescent probes, labels in biology, laser industry.     

Lifetimes of high Rydberg states of methyl halides

The lifetimes of high Rydberg states of the methyl halides CH₃I, CH₃Br and CH₃Cl have been studied. A pulsed dye laser tuned near half the ionization energy was used, with preprogrammed field pulses, and the high Rydberg states of the compounds in selected ranges of n values were ionized after a variable delay. Plots of the electron signal versus delay yielded information about the Rydberg state lifetime. The clearest trend was found for around n = 120–160: the lifetimes of the states decreased by more than an order of magnitude from CH₃I (τ ≈12.3 μs) through CH₃Br to CH₃C1. Within the range studied, the theoretically predicted increase in lifetimes (n ⁵ or n ³) was not found, and in fact the highest group of states studied (with n > 215) exhibited for all three compounds relatively short lifetimes (≈2-3 μs), possibly due to collisional processes.     

Hydroxyl end groups influence in vibrational and transport properties in polymer/monomer solutions: the PEO/EG case

A study has been made of vibrational properties in ethylene glycol (EG; H(OCH₂CH₂)OH) and EG monomethyl ether (EGmE; CH₃(OCH₂CH₂)OH) in solution together with poly(ethylene oxide) (PEO; H(OCH₂CH₂)_n,OH) at different concentrations, performed by Fourier transform infrared absorbance (FT-IR) spectroscopy. The results ae compared with previous viscometry and photon correlation spectroscopy (PCS) studies, using EG dimethyl ether (EGdE; CH₃(OCH₂CH₂)OCH₃) as solvent as well. These homologous systems differ from each other in the number of OH end groups, in particular two for EG, one for EgmE and zero for EGdE. Combining analysis of the vibrational and transport properties of EG, EGmE and EGdE in solution with PEO over a wide range of concentration made it possible to check the quality (good theta or poor) of these three different solvents and the role played by the hydrogen bond in the various solute-solvent interaction mechanisms, resulting in the well known de Gennes scaling law.     

Study on nonlinear optical absorption properties of [(CH3)4N]2[Cu(dmit)2] by Z-scan technique

The third-order optical nonlinearities of an organo-metallic compound, [(CH₃)₄N]₂[Cu(dmit)₂] (dmit²⁻=4,5-dithiolate-1,3-dithiole-2-thione), abbreviated as MeCu, dissolved in acetone are characterized by Z-scan technique with picosecond and nanosecond laser pulses in the near-infrared region. Two-photon absorption has been found when the sample solution is irradiated by 40 ps pulse width at 1064 nm and the two-photon absorption (TPA) coefficient β_TPA is 4×10⁻¹³ m/W. While excited by 15 ns laser pulses at 1053 nm, the Z-scan spectra reveal strong reverse saturable absorption (RSA) and the nonlinear absorption coefficient β_RSA is estimated to be as high as 7.07×10⁻¹¹ m/W which is much larger than β_TPA. An explanation for this enhancement is given. All the results suggest that MeCu may be a promising candidate for the application to optical limiting in the near-infrared region.     

Solvent effect profiles of absorbance and fluorescence spectra of some indole based chalcones

The photophysical properties of a series of 3-(1′H-Indol-3′-yl)-1-phenylprop-2-en-1-one and its derivatives (indole chalcones) were studied in different solvents. Solvent effects on the absorption and fluorescence spectra were quantified using Reichardt’s and bulk solvent polarity parameters and were complemented by the results of the Kamlet-Taft treatment. The observed excited state dipole moment was found to be larger than the ground state dipole moment of these chalcones. The correlation of the solvatochromic Stokes-shifts with the microscopic solvent polarity parameter (E_T^N E_T^N ) was found to be superior to that obtained using bulk solvent polarity functions.     

Energy transfer and excited state lifetime of some anthracene laser dyes

The lifetimes of some anthrathene derivatives in different solvents have been determined using the phase modulation method. The lifetime of 10-phenyl-2-methyl-9-acetoxyanthracene and 10-(4-acetoxyphenyl)-2-methyl-9-acetoxyanthracene were found to equal 11 and 11 ns in methanol, respectively. Energy transfer from 10-phenyl-2-methyl-9-acetoxyanthracene and 10-(4-acetoxyphenyl)-2-methyl-9-acetoxyanthracene to rhodamine B and rhodamine 110 in different solvents has been studied by using steady-state emission measurements. The large values of the critical transfer distance R₀ and the rate constant of energy transfer k_ET suggest that the mechanism is long-range dipole–dipole energy transfer as described by Förster.     

Vibrational spectra of an LiNO3–(CH3)2SO2 system

Raman and IR absorption spectra were studied and molecular relaxation characteristics of vibrations of the anion and solvent were calculated for an xLiNO₃–(1 – x)(CH₃)₂SO₂ system (x = 0.1, 0.2, 0.3, 0.4 M). It was found that it is impossible to increase the concentration of free ions involved in charge transfer in such a system by either increasing the temperature or changing the concentration composition in the studied range of x.     

Electrochemical properties and radical anions of carbocycle‐fluorinated quinoxalines and their substituted derivatives

Electrochemical reduction (ECR) and oxidation (ECO) of 5,6,7,8‐tetrafluoroquinoxaline ( 1 ) and its derivatives bearing various substituents R (7‐H ( 2 ), 7,8‐H₂ (3 ), 6‐CF₃ ( 4 ), 6‐Cl ( 5 ), 5,7‐Cl₂ ( 6 ), 5‐NH₂ ( 7 ), 6‐OCH₃ ( 8 ), 6,7‐(OCH₃)₂ ( 9 ), 6,7,8‐(OCH₃)₃ ( 10 ), 5,6,7,8‐(OCH₃)₄ ( 11 ), 6‐OCH₃,7‐N(CH₃)₂ ( 12 ), 6‐N(CH₃)₂ ( 13 ), 6,7‐(N(CH₃)₂)₂ ( 14 ), 5,6,7‐(N(CH₃)₂)₃ ( 15 ), and 7,8‐cyclo‐(=CF‐CF = CF‐CF=) ( 16 )) in the carbocycle have been studied by cyclic voltammetry in MeCN. For 1 – 4 and 7 – 15 , the first reduction peaks have been found to be 1‐electron and reversible, thus corresponding to the formation of their radical anions (RAs), which are long lived at 295 K except those of 4 – 6 and 15 , 16 . Irreversible hydrodechlorination has been observed for 5 and 6 at the first step of their ECR confirmed by EPR detection of corresponding RAs of 2 and 5,7‐H₂ derivative of 1 ( 17 ) at the next steps. Electrochemically generated RAs of 1 – 3 , 7 – 14 , and 17 have been characterized in MeCN by EPR spectroscopy together with DFT calculations at the (U)B3LYP/6‐31 + G(d) level of theory using PCM to describe the solvent. A noticeable alternation of spin density on the –NCCN– moiety of quinoxaline has been observed for all RAs possessing R‐substitution asymmetry. The comparative electron‐accepting ability of 1 – 15 has been analyzed in terms of their experimental reduction peak potentials and the (U)B3LYP/6‐31 + G(d)‐calculated gas‐phase first adiabatic electron affinities (EAs). The differences in electron transfer solvation energies for 1 – 15 have been evaluated on the basis of ECR peaks' potentials and calculated gas‐phase EAs. The ECO of 1 – 5 and 7 – 14 has been found to be irreversible.     

Purine Scaffold Effect on Fluorescence Properties of Purine-Hydroxyquinolinone Bisheterocycles

The fluorescence properties of bisheterocyclic compounds that contain purine and the 3-hydroxyquinolin-4(1H)-one skeleton connected with an aliphatic spacer of a different length/structure (3HQP) were examined. It was found that the introducing of the spacer-purine scaffold led in the comparison to 3HQs themselves to (1) the possibility of the effectual excitation in the wider range of excitation wavelengths, moreover, some derivatives can be excited at relatively high wavelengths around 400 nm, (2) the lowering of the quantum yield and (3) the slight longer wavelength shift of the dual emission spectra. Tested organic solvents did not affect significantly the 3HQP fluorescence properties. The characters of emission spectra as well as the quantum yields of 3HQPs were notably influenced by the ratio of water and DMSO in their composed mixture applied as a solvent. With increasing water content in the mixture both I₁/I₂ and the quantum yield decreased.     

Synthesis of silver and lithium sub-micro- and nanoparticles coated with derivatives of <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butyl thiacalix[4]arenes

The effect of solvent nature and temperature on the formation of 3D-dimensional SAM (self-assembled monolayers on nanoparticles) based on synthetically available stereoisomers of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by pyrrolidide and octylamide groups (cone, partial cone, and 1,3-alternate) with lithium and silver nanoparticles were determined by dynamic light-scattering and transmission electron microscopy. It was found that the variation of the temperature of the system and the nature of the solvent leads to the formation discrete or extended particles (CH₂Cl₂) (98–110 nm), nanostructures (CH₃CN) (120–295 nm) or three-dimensional SAM (DMF) (1–13 nm; 46–622 nm).     

Synthesis of hydroxyoligophenylenes containing electron‐donating,electron‐accepting groups,or π‐deficient aromatic ring and their solvatochromic behavior

We have reported oligo(p‐phenylene)s (OPPs) with an OH group located at one end, namely, OPP(n)‐OHs (where n is the number of benzene rings). The OPPs exhibited significant solvatochromism; the deprotonation of the OH groups of OPP(n)‐OHs , when treated with NaH, caused a bathochromic shift of absorption maxima (λ_max) that increased with the donor numbers (DNs) of the solvents. We assumed that the solvatochromism exhibited by OPP(n)‐ONa was attributed to an intramolecular charge shift from the sodium phenoxy group(s) to the adjacent rings. In this study, to investigate the assumption, hydroxyoligophenylenes ( R‐OPP(n)‐OH ) with an electron‐donating dimethylamino group (n = 3, R = NMe₂), an electron‐accepting nitro group (n = 3, R = NO₂), and a π‐deficient pyridine ring (n = 2, R = Py) were synthesized by the Suzuki coupling reaction. The deprotonation of the OH group of by treatment with NaH caused a bathochromic shift (Δλ) of λ_max of R‐OPP(m)‐ONa . The Δλ of the deprotonated species increased with the DNs of the solvents. The emission peak positions of R‐OPP(m)‐ONa depended on the DNs of the solvents; therefore, the emission color could be tuned by changing the solvent. R‐OPP(m)‐OH received an electrochemical oxidation of the OH group and OPP unit. The data related to the remarkable solvatochromic behavior of R‐OPP(n)‐ONa will be useful information for the development of new luminescent materials.     

Preparation of well-structured organosilane layers on silica

An efficient grafting process of monofunctional alkylchlorosilanes (general formula: CH₃-(CH₂) _n-1-Si(CH₃)₂Cl with n varying from 4 to 30) onto silica nanoparticules was developed by varying the surface preparation and the solvent used for the deposition process. A vapor phase deposition method was considered as reference and silicon wafers with a native SiO₂ layer were used as a model surface of the silica particles. The grafting method was evaluated by studying the wettability and the grafting densities of the resulting monolayers. The chain conformation of the monolayers was determined by comparing the thickness measured by SE ellipsometry and AFM. By comparing the solvent and vapor phase deposition methods, it was demonstrated that the deposition process had a large influence on the structure of the grafted monolayers. The same structure as from a vapor phase method can be obtained from a solvent deposition process by a suitable choice of the solvent and by a strict cleaning of the surface before deposition. The grafting of much longer chains of such silane-terminated polyethylenes with different molar mass on the silica surface was also investigated in order to study the effects of the chain length on the grafting density and the layer structure. For both the short alkylchlorosilanes and polymeric grafted chains, the proposed organization of the grafted chains at the silica surface is found to be strongly dependent on the length of the alkyl chains.     

Theoretical study on the electronic structures and phosphorescent properties of four Ir(III) complexes with different substituents on the ancillary ligand

The geometry structures, electronic structures, absorption and phosphorescent properties of four Ir(III) complexes {[(F₂-ppy)₂Ir(pta-X)], where F₂-ppy = (2,4-difluoro)phenylpyridine; pta = pyridine-1,2,4-triazole; X = –CF₃; –H; –CH₃; –N(CH₃)₂}, are investigated using the density functional method. The results reveal that the electron-accepting group –CF₃ has no obvious effect on absorption and emission properties, while the substitutive group –N(CH₃)₂ with strong electron-donating ability has obvious effect on the emission properties. The mobility of hole and electron were studied computationally based on the Marcus–Hush theory. Calculations of ionisation potential and electron affinity were used to evaluate the injection abilities of holes and electrons into these complexes. We hope that this theoretical work can provide a suitable guide to the future design and synthesis of novel phosphorescent materials for use in the organic light-emitting diodes.     

Fluorescent Properties of a Hybrid Cadmium Sulfide-Dendrimer Nanocomposite and its Quenching with Nitromethane

A fluorescent hybrid cadmium sulphide quantum dots (QDs) dendrimer nanocomposite (DAB-CdS) synthesised in water and stable in aqueous solution is described. The dendrimer, DAB-G5 dendrimer (polypropylenimine tetrahexacontaamine) generation 5, a diaminobutene core with 64 amine terminal primary groups. The maximum of the excitation and emission spectra, Stokes’ shift and the emission full width of half maximum of this nanocomposite are, respectively: 351, 535, 204 and 212 nm. The fluorescence time decay was complex and a four component decay time model originated a good fit (χ = 1.20) with the following lifetimes: τ ₁ = 657 ps; τ ₂ = 10.0 ns; τ ₃ = 59.42 ns; and τ ₄ = 265 ns. The fluorescence intensity of the nanocomposite is markedly quenched by the presence of nitromethane with a dynamic Stern-Volmer constant of 25 M⁻¹. The quenching profiles show that about 81% of the CdS QDs are located in the external layer of the dendrimer accessible to the quencher. PARAFAC analysis of the excitation emission matrices (EEM) acquired as function of the nitromethane concentration showed a trilinear data structure with only one linearly independent component describing the quenching which allows robust estimation of the excitation and emission spectra and of the quenching profiles. This water soluble and fluorescent nanocomposite shows a set of favourable properties to its use in sensor applications.     

The optical properties of Dy-doped NaY(MoO4)2 crystal

The Dy³⁺-doped NaY(MoO₄)₂ single crystals were grown successfully by the Czochralski technique. The main spectroscopic properties (absorption, luminescence, decay curve) of Dy³⁺-doped NaY(MoO₄)₂ have been determined for both the σ and π polarizations. By using the Judd-Ofelt theory, the measured room temperature absorption spectra were applied to determine the intensity parameters, spontaneous transition probabilities, branching ratios, and radiative lifetimes of Dy³⁺ transitions. The results show that the Dy³⁺-doped NaY(MoO₄)₂ crystal may realize the yellow laser operation.