Development and Validation of Stability-Indicating HPLC Methods for Quantitative Determination of Pravastatin,Fluvastatin, Atorvastatin,and Rosuvastatin in Pharmaceuticals

Abstract

High-performance liquid-chromatographic (HPLC) methods were validated for determination of pravastatin sodium (PS), fluvastatin sodium (FVS), atorvastatin calcium (ATC), and rosuvastatin calcium (RC) in pharmaceuticals. Two stability-indicating HPLC methods were developed with a small change (10%) in the composition of the organic modifier in the mobile phase. The HPLC method for each statin was validated using isocratic elution. An RP-18 column was used with mobile phases consisting of methanol–water (60:40, v/v, for PS and RC and 70:30, v/v, for FVS and ATC). The pH of each mobile phase was adjusted to 3.0 with orthophosphoric acid, and the flow rate was 1.0 mL/min. Calibration plots showed correlation coefficients (r) > 0.999, which were calculated by the least square method. The detection limit (DL) and quantitation limit (QL) were 1.22 and 3.08 µg/mL for PS, 2.02 and 6.12 µg/mL for FVS, 0.44 and 1.34 µg/mL for ATC, and 1.55 and 4.70 µg/mL for RC. Intraday and interday relative standard deviations (RSDs) were <2.0%. The methods were applied successfully for quantitative determination of statins in pharmaceuticals.     

Validated HPLC Method for Separation and Determination of Terbutaline Enantiomers

Abstract

A simple, rapid, and validated method for separation and determination of terbutaline enantiomers was developed. Terbutaline was separated and determined on a Vancomycin Chirobiotic V column (250 × 4.6 mm), using a mixture of methanol, acetic acid, and triethylamine (100:0.1:0.1% v/v/v) as a mobile phase at 20°C and at a flow rate of 1 ml/min. The UV detector was set to 276 nm. Acetyl salicylic acid (aspirin) was used as an internal standard. The applied high-performance liquid chromatography (HPLC) method allowed separation and quantification of terbutaline enantiomers with good linearity (r > 0.999) in the studied range. The relative standard deviations (RSD) were 1.10 and 1.32% for the terbutaline enantiomers with accuracy of 99.80 and 99.55. The limit of detection and limit of quantification of terbutaline enantiomers were found to be 0.05 and 0.10 µg · ml^?1, respectively. The method was validated through the parameters of linearity, accuracy, precision, and robustness. The HPLC method was applied for the quantitative determination of terbutaline in pharmaceutical formulations.     

Synthesis and application of a novel solid-phase microextraction adsorbent: hollow fiber supported carbon nanotube reinforced sol-gel for determination of phenobarbital

The present study reports the development, validation and application of a new green liquid chromatographic method for the determination of glutathione (GSH) in vegetable samples. In this work we introduce—for the first time—ethyl propiolate (EP) as an advantageous post-column derivatization reagent for thiolic compounds. GSH (t_R = 6.60 min) and N-acetylcysteine (NAC, internal standard) (t_R = 11.80 min) were separated efficiently from matrix endogenous compounds by using a 100% aqueous mobile phase (0.1%, v/v CH₃COOH in 1 mmol L⁻¹ EDTA, Q_V = 0.5 mL min⁻¹) and a Prevail^® reversed phase column that offers the advantage of stable packing material in aqueous mobile phases. The parameters of the post-column reaction (pH, amount concentration of the reagent, flow rates, length of the reaction coil and temperature) were studied. The linear determination range for GSH was 1–200 μmol L⁻¹ and the LOD was 0.1 μmol L⁻¹ (S/N = 3). Total endogenous GSH was determined in broccoli, potato, asparagus and Brussels sprouts using the standards addition approach. The accuracy was evaluated by both recovery experiments (R = 91–110%) and comparison to an o-phthalaldehyde/glycine corroborative post-column derivatization fluorimetric method.     

Development and validation of RP-HPLC method for simultaneous estimation of prednicarbate,mupirocin and ketoconazole in topical dosage forms

A simple and accurate reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated for simultaneous estimation of prednicarbate (PC), mupirocin (MP) and ketoconazole (KT) in topical dosage forms. This combination is preferred for topical delivery of anti-inflammatory, antibacterial and antifungal agents for treatment of various skin disorders. The proposed RP-HPLC method utilizes a Hypersil GOLD C18, 5 μm, 250 mm × 4.6 mm i.d. column, mobile phase consisting of methanol-water (80: 20, v/v) adjusted to pH 5.0 with orthophosphoric acid in isocratic mode at the flow rate of 0.5 mL/min and UV detection at 243 nm. The method does not require any specific sample preparation except extraction of active pharmaceutical ingredients from the developed topical emulgel formulations using dichloromethane. Linearity was found in the range of 0.05–0.3 mg/L for PC and 0.4–2.4 mg/L for each of MP and KT with R ² > 0.999. The method is precise with low RSD%, accurate (overall average recovery yields: 99.92% for PC, 99.44% for MP and 99.74% for KT) and selective. Due to its simplicity and accuracy, the method is suitable for simultaneous analysis of PC, MP and KT in topical dosage forms.     

Determination of itopride in human plasma by liquid chromatography coupled to tandem mass spectrometric detection: application to a bioequivalence study

A simple method using a one-step liquid-liquid extraction (LLE) with butyl acetate followed by high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometric (ESI-MS/MS) detection was developed for the determination of itopride in human plasma, using sulpiride as an internal standard (IS). Acquisition was performed in multiple reaction monitoring (MRM) mode, by monitoring the transitions: m/z 359.5 > 166.1 for itopride and m/z 342.3 > 111.6 for IS, respectively. Analytes were chromatographed on an YMC C₁₈ reverse-phase chromatographic column by isocratic elution with 1 mM ammonium acetate buffer-methanol (20: 80, v/v; pH 4.0 adjusted with acetic acid). Results were linear (r² = 0.9999) over the studied range (0.5-1000 ng mL⁻¹) with a total analysis time per run of 2 min for LC-MS/MS. The developed method was validated and successfully applied to bioequivalence studies of itopride hydrochloride in healthy male volunteers.     

Stability-indicating high performance thin layer chromatographic determination of sulfanilamide in human urine

A simple, sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic (HPTLC) method was developed and applied to human urine for the densitometric determination of sulfanilamide. A mixture of chloroform-ethyl acetate-xylene (2.5: 4.0: 1.0, v/v/v) was used as a mobile phase. The system was found to give compact spots for sulfanilamide (retardation factor, R _f = 0.21±0.02). The linear regression analysis data for the calibration plots showed good linear relationship with r ² = 0.9970 ± 0.0003 and r ² = 0.9947 ± 0.020 within the concentration range of 50–250 ng per spot and 100–1000 ng per spot with respect to peak area, respectively. The limit of detection (LOD) and quantification (LOQ) were 8 and 25 ng per spot, respectively. Sulfanilamide was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment. According to the International Conference on Harmonization (ICH) guidelines the method was validated for precision, recovery and robustness. The ultraviolet (UV) spectra of the degradation products which had different spectra from sulfanilamide were also recorded. The article is published in the original.     

Determination of biothiols by a novel on-line HPLC-DTNB assay with post-column detection

A novel on-line HPLC-DTNB method was developed for the selective determination of biologically important thiols (biothiols) such as l-cysteine (Cys), glutathione (GSH), homocysteine (HCys), N-acetylcysteine (NAC), and 1,4-dithioerythritol (DTE) in pharmaceuticals and tissue homogenates. The biothiols were separated on C18 column using gradient elution, reacted with the postcolumn reagent, DTNB in 0.5% M-β-CD (w/v) solution at pH 8, to form yellow-colored 5-thio-2-nitrobenzoic acid (TNB), and monitored with a PDA detector (λ = 410 nm). With the optimized conditions for chromatography and the post-column derivatization, 40 nM of NAC, 40 nM of Cys, and 50 nM of GSH can be determined. The relative standard deviations of the recommended method were in the range of 3.2–5.4% for 50 μM biothiols. The negative peaks of biothiol constituents were monitored by measuring the increase in absorbance due to TNB chromophore. The detection limits of biothiols at 410 nm (in the range of 0.04–0.58 μM) after post-column derivatization with DTNB + M-β-CD were much lower than those at 205 nm UV-detection without derivatization, and were distinctly lower than those with post-column DTNB alone. The method is rapid, inexpensive, versatile, nonlaborious, uses stable reagents, and enables the on-line qualitative and quantitative estimation of biothiol constituents of biological fluids and pharmaceuticals.     

Zwitterionic hydrophilic interaction chromatography coupled with post-column derivatization for the analysis of glutathione in wine samples

In this study the development, validation and application of a new chromatographic method for the determination of glutathione (GSH) in wine samples is presented. The separation of the GSH was carried out using a sulfobetaine-based hydrophilic interaction chromatography (HILIC) analytical column whereas its detection was carried out spectrofluorimetrically (λ_ext/λ_em = 340/455 nm) after post-column derivatization with o-phthalaldehyde. GSH was separated efficiently from matrix endogenous compounds of wines by using a mobile phase of 15 mmol L⁻¹ CH₃COONH₄ (pH = 2.5)/CH₃CN, 35/65% (v/v). The parameters of the post-column reaction (pH, amount concentration of the reagent and buffer solution, flow rate, length of the reaction coil) were investigated. The linear determination range for GSH was 0.25–5.0 μmol L⁻¹ and the LOD was 19 nmol L⁻¹. No matrix effect was observed, while the accuracy was evaluated with recovery experiments and was ranged between 89% and 108%.     

Development and validation of a single HPLC method for determination of α‐tocopherol in cell culture and in human or mouse biological samples

A straightforward and common analytical method for α‐tocopherol (αT) determination in various biological samples, including plasma, red blood cells (RBC), tissues and cultured cell lines, was developed and validated, using a reverse phase‐chromatographic method (RP‐HPLC). Even though many chromatographic methods for αT determination have been reported, most of them require readjustment when applied to different types of samples. Thus, an effective and simple method for αT determination in different biological matrices is still necessary, specifically for translational research. This method was applied using a C₁₈ column (250 × 4.6 mm, 5 µm particle size) under isocratic elution with MeOH:ACN:H₂O (90:9:1 v/v/v) at a flow rate of 1 mL/min and detected using photodiode array at 293 nm. Linearity (r >0.9997) was observed for standard calibration with inter‐ and intraday variation of standard <4%. Lower limits of detection and quantification for αT in this assay were 0.091 and 0.305 µg/mL respectively. Validation proved the method to be selective, linear, accurate and precise. The method was successfully applied in great variety of biological samples, that is, human and mouse plasma, RBCs, murine tissues and human/mouse/rat cultured cell lines. More importantly, a single protocol of extraction and detection can be applied, making this method very convenient for standardization of different types of samples. Copyright © 2014 John Wiley & Sons, Ltd.     

An LC‐MS/MS method for determination of calceorioside B with cardiomyocyte protective activity in rat plasma and application to a pharmacokinetic study

A simple, sensitive and rapid liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method was developed and validated for the determination of calceorioside B (CLB) in rat plasma. Detection was performed on a Thermo Scientific Hypersil Gold chromatography column using isocratic elution with a mobile phase of methanol–5 m m ammonium acetate–formic acid (70:30:0.1, v/v/v). Mass spectrometry was performed in selection reaction monitoring mode using a positive electrospray ionization interface. Good linearity was found for CLB in plasma in the linear range of 1.00–500 ng/mL (r > 0.9960). The validated method was successfully applied to the pharmacokinetic study of CLB in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

Development and Validation of a Stability-Indicating LC Method to Quantify Hydrochlorothiazide in Oral Suspension for Pediatric Use

A stability-indicating reversed-phase high-performance liquid chromatography (LC) method was developed and validated for the determination of hydrochlorothiazide in an oral suspension. Isocratic chromatography was performed on a C₁₈ column with 0.1 M sodium phosphate buffer pH 3.0/acetonitrile (70:30 v/v) as mobile phase, at a flow rate of 1.3 mL min⁻¹, and UV detection at 254 nm. The method was linear (r ² = 0.9998), accurate (mean recovery = 100.3%), and precise (RSD <2%). It was also validated for specificity and robustness. The method was successfully applied for the quality control analysis of a new pharmaceutical formulation of HCTZ for pediatric use.     

Fluorimetric determination of kynurenine in human serum by high-performance liquid chromatography coupled with post-column photochemical reaction with hydrogen peroxide

A high-performance liquid chromatographic method involving post-column photochemical reaction and fluorimetric detection has been developed for the determination of kynurenine in serum. Kynurenine was separated on a column of Capcell Pak C18 (resistant to pH 10). The mobile phase consisted of 0.05 M Na2B4O7-0.1 M KH2PO4 buffer (pH 8.5)-ethanol (97:3, v/v) containing 60 mM hydrogen peroxide. The post-column reagent, containing 60% (v/v) ethanol, was mixed with the mobile phase, which was irradiated with ultraviolet light to induce fluorescence. The recovery of kynurenine was 95.9 +/- 5.0% (n = 6). The method allows the determination of as little as 2 pmol of kynurenine.     

Analysis of steroids by nonaqueous capillary electrophoresis

A simple method for the separation and determination of steroids (estradiol valerate, triamcinolone, levonorgestrel and ethinylestradiol) in single and compound tablets by nonaqueous capillary electrophoresis with ultraviolet (UV) spectrophotometric detection has been developed for the first time. After optimizing the electrophoretic parameters, including the nature of electrolytes and composition of organic solvent, the running buffers of methanol-acetonitrile (95: 5, v/v) containing 20 mM sodium acetate (pH 6.5) and methanol-acetonitrile (90: 10, v/v) containing 25 mM sodium acetate (pH 7.0) were found to be most suitable for determining estradiol valerate and triamcinolone, respectively. Reliable separation and simultaneous determination of levonorgestrel and ethinylestradiol were achieved in methanol containing 20 mM of ammonium acetate and 10 mM of sodium dodecyl sulfate (SDS). Tamoxifen was used as internal standard. Performance of the method, including migration time and peak area reproducibility, linearity, sensitivity and accuracy, were also evaluated. The limits of detection (S/N = 3) for four analytes were in the range of 9.8–19.5 μ g/mL. The relative standard deviations (RSD) of the migration times and peak areas of the analytes were in the range of 0.14–1.0% and 0.7–2.7% (intraday), 0.5–2.8% and 1.5–4.2% (interday), respectively. Within the tested concentration range, linear relationships between peak area ratios and concentrations of the analytes were obtained (correlation coefficients: 0.9987–0.9996). The method has been successfully applied to the determination of ingredients with recoveries over the range of 96.6–100.6%. The text was submitted by the authors in English.     

Simultaneous Determination of Fluvoxamine and Its Metabolites in Human Liver Microsomes by High‐Performance Liquid Chromatography with Solid‐Phase Extraction

Abstract

A simple and sensitive high‐performance liquid chromatography method was developed for the simultaneous quantitative determination of fluvoxamine and its two metabolites, fluvoxamino alcohol and fluvoxamino acid, in human liver microsomes. Chromatographic separation was achieved with a Grand‐pak C4‐5 column using a mobile phase at pH 2.5 of 0.5% KH₂PO₄‐acetonitrile (75:25, v/v). Analysis involved a solid‐phase extraction with an Oasis HLB cartridge, which gave high extraction recovery (>92.8%) with good selectivity. The lower limit of quantification of this assay was 78.6 nM for fluvoxamine and fluvoxamino acid, and 82.2 nM for fluvoxamino alcohol, respectively. The coefficient of variation of intra‐ and interday assays was less than 5.8% and accuracy was within 5.3% for all analytes (concentration range 78.6 nM–2.36 µM for fluvoxamine and fluvoxamino acid, and 82.2 nM–2.47 µM for fluvoxamino alcohol, respectively). This method is applicable for accurate and simultaneous determination of oxidative metabolites of fluvoxamine by human liver microsomes.     

Determination of phenyltin compounds by reversed-phase liquid chromatography

An analytical procedure for the determination of phenyltin compounds in environmental sample waters was studied. Chromatography of mono-, di- tri-phenyltin (MPT, DPT and TPT) was performed on a reversed-phase C₁₈ column with the mobile phase comprising methanol/10⁻² M H₃PO₄ (80:20 v/v) at pH 3 and UV detection at 214 nm. To enhance the sensitivity of the detection system, the post-column reaction between morin or 3-hydroxyflavone and phenyltin compounds was formed before fluorescence detection. Several parameters affecting the fluorescence intensity were studied systematically, including the optimum condition for the post-column reagent that was also compatible with the eluent. The parameters concerned in this study were the pH, the percentage of Triton X-100, the ratio of fluorigenic reagent to phenyltin compounds and the amount of methanol in the eluent. Detection limits before the preconcentration process were in the region of 1.5 ppb for TPT and 150–250 ppb for MPT and DPT, respectively. Utilizing solid-phase extraction on a C₁₈ cartridge for sample clean-up as well as preconcentration successfully reduced the detection limit of TPT to the level of ng dm⁻³ and can be applied to seawater analysis. Recovery in the range 95.0–98.0% was obtained by developing the optimum elution profile in the preconcentration step. © 1998 John Wiley & Sons, Ltd.     

Determination of benzoate,sorbate, citrate and orthophosphate ions in beverage samples using two-dimensional isotachophoretic method

A two-dimensional capillary isotachophoretic method (cITP-cITP) using electrolyte system consisting of leading electrolytes (LE1): [10 mM HCl + β-alanine (pH 3.9) + 0.1% hydroxyethylcellulose (HEC)] and (LE2): [10 mM HCl + aminocaproic acid (pH 5.00) + 0.1% HEC], and 5 mM caproic acid as terminating electrolyte (TE) was studied. Two methods of detection, conductometric and UV-Vis, were applied to the determination of selected food preservatives and additives. Practical applicability was demonstrated by simultaneous determination of benzoates, sorbates, citrates and orthophosphates in 12 samples of beverages. The proposed method revealed linearity with R ² between 0.9992 and 0.9999 for the concentration ranges: 10–100 mg/L (orthophosphate and citrate ions), 20–100 mg/L (sorbates) and 40–120 mg/L for benzoates. The detection limits for all studied ions were from 0.85 to 3.1 mg/L whereas the quantification ones were from 2.8 to 10 mg/L. The variation coefficients for five-fold analysis of all ions ranged between 0.4 and 9.1%. Obtained recoveries (from 97 to 104%) confirmed satisfactory accuracy of the proposed cITP-cITP method for the determination of tested food additives.     

Simultaneous Determination of Ibuprofen and Pseudoephedrine Hydrochloride in Pharmaceutical Tablets by Reversed-Phase HPLC

Abstract

An isocratic HPLC method was developed and validated for the simultaneous determination of ibuprofen (IBU) and pseudoephedrine hydrochloride (PSE). Chromatography was carried out on an Apex phenyl column using 0.025 M acetic acid, triethylamine solution (pH 4.5) – acetonitrile (80:20, v/v) as mobile phase at a flow rate of 1 mL · min^?1. UV detection was performed at a wavelength of 210 nm. The method was validated for specificity, linearity, accuracy, precision, and was successfully applied to pharmaceutical tablets of Rhinadvil®.     

A rapid UHPLC–MS/MS method for the quantification of ARQ531 in rat plasma: Validation and its application to a pharmacokinetic study

A simple and sensitive ultra-high performance liquid chromatography–tandem mass spectrometric (UHPLC–MS/MS) method was developed and validated for the determination of ARQ531, a Bruton’s tyrosine kinase inhibitor in rat plasma. After protein precipitation with acetonitrile, the samples were separated on a UPLC BEH C₁₈ column with 0.1% formic acid in water and acetonitrile as mobile phase at a flow rate of 0.4 ml/min. The mass detection was performed on a triple quadrupole tandem mass spectrometer by multiple reaction monitoring with precursor-to-product ion transitions of m/z 479.1 > 365.1 and m/z 441.2 > 138.1 for ARQ531 and internal standard, respectively. Good linearity (correlation coefficient > 0.9988) was achieved over the concentration range of 0.5–1,000 ng/ml and the lower limit of quantitation was 0.5 ng/ml. The accuracy ranged from −13.50 to 11.35% and the precision was <8.87%. The extraction recovery was >85.56%. ARQ531 was demonstrated to be stable under the tested conditions. The validated method was further applied to a pharmacokinetic study of ARQ531 in rats after intravenous (1 mg/kg) and oral (1, 3 and 10 mg/kg) administration. The results demonstrated that ARQ531 displayed linear pharmacokinetic profiles over the oral dose range of 1–10 mg/kg and good oral bioavailability (>50%).     

Speciation analysis of manganese in tea samples using flame atomic absorption spectrometry after cloud point extraction

The speciation of Mn(II) in tea infusion was studied using cloud point extraction (CPE). In tea infusion, the flavonoid-bound Mn(II) was extracted at pH 5.0 using Triton X-100 (TX-100), the remaining free aquated Mn(II) and weakly-complexed Mn(II) in solution were both chelated with 8-hydroxyquinoline (HOx) and CPE-preconcentrated with TX-100. The enriched analyte was determined by flame AAS. The optimal concentrations for CPE of 0.02 ppm Mn were as follows: TX-100, 0.2% (v/v); HOx, 1.0 × 10⁻⁴ M; NaCl, 1.0% (w/v). LOD was 1.9 μg/L with a preconcentration factor of 10–20. The method was validated using a standard XAD-resin separation procedure and applied to synthetic seawater and CRM samples.     

Supercritical fluid chromatography with post-column addition of supporting electrolyte solution for electrochemical determination of tocopherol and tocotrienol isomers

A supercritical fluid chromatography with electrochemical detection system was developed for the simultaneous determination of tocopherol and tocotrienol isomers. The supercritical fluid chromatography with electrochemical detection system was connected with an additional pump to create a flow path to add a supporting electrolyte solution. The supporting electrolyte solution was mixed with a mobile phase in a post-column fashion, enabling the independent control of the separation and detection. After optimization of the measurement conditions, vitamin E isomers and an internal standard substance (2,2,5,7,8-pentamethyl-6-hydroxychroman) were separated within 30 min using a mixture of supercritical carbon dioxide and methanol (99:1, v/v) as a mobile phase and a cyanopropyl column (4.6 mm inner diameter × 250 mm length, 5 μm). For the electrochemical detection, methanol containing 1.0 mol/L ammonium acetate was used as a supporting electrolyte solution, and the applied potential was set at +0.8 V. This analytical method showed good linearity (5–100 μg/mL) and repeatability (less than 2.5% relative standard deviation, n = 6) and was applicable to the determination of tocopherol and tocotrienol isomers in nutrition supplements.