Synthesis and study of solid acid materials SnO<Subscript>2</Subscript>/B<Subscript>2</Subscript>O<Subscript>3</Subscript>

SnO₂/B₂O₃ samples were produced by a reaction between SnCl₄, H₃BO₃, and (NH₂)₂CO in a boiling aqueous solution. The Sn: B molar ratio in these samples was 1: 1, 1: 2, and 1: 3. The phase composition and degree of crystallinity of these materials was studied. The surface acidity of the samples was analyzed by the method based on a temperature-programmed reaction of dehydration of 2-methyl-3-butyn-2-ol. Thermal transformations of SnO₂/B₂O₃ samples were examined by means of differential-thermal analysis.     

Three-component systems LiBr-LiVO<Subscript>3</Subscript>-Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript> and LiBr-Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>-Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>

Phase equilibria in the three-component systems LiBr-LiVO₃-Li₂MoO₄ and LiBr-Li₂SO₄-Li₂MoO₄ have been studied using differential thermal analysis (DTA). Eutectic compositions have been determined (mol %): in the system LiBr-LiVO₃-Li₂MoO₄, 56.0 LiBr, 22.0 LiVO₃, and 22.0 Li₂MoO₄ with a melting temperature of 413°C; and in the system LiBr-Li₂SO₄-Li₂MoO₄, 65.0 LiBr, 14.0 Li₂SO₄, and 21.0 Li₂MoO₄ with a melting temperature of 421°C. Phase fields have been demarcated.     

Dual course of bisacetonation of D-xylose in a system Me<Subscript>2</Subscript>CO-Me<Subscript>2</Subscript>C(OMe)<Subscript>2</Subscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

In the course of formation of a bisisopropylidene protective group by keeping D-xylose in a mixture Me₂CO-(MeO)₂CMe₂-H₂SO₄ alongside the expected 1,2:4,5-O-diisopropylidene derivative formed minor dimethylacetal, 2,3:4,5-O-diisopropylidene-D-xylose, inseparable from the main product by the chromatography on SiO₂. The conditions were found for the selective formation and isolation of the latter, some its one-pot transformations were studied resulting in synthetically promising orthogonally protected acyclic C⁵-synthons.     

Phase diagram of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript>-Ag<Subscript>2</Subscript>O system

The results concerning the synthesis, structure and thermal properties of V₂O₅-MoO₃-Ag₂O samples in the vanadium rich region of ternary system are presented in the form of quasi-binary phase diagrams in which at constant V₂O₅/MoO₃ molar ratios, equal 9:1, 7:3 and 1:1, the content of Ag₂O was variable. A new ternary phase isostructural with NaVMoO₆ has been detected in the investigated system.     

Subsolidus phase diagrams for the Tl<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Ln<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Hf(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> systems,where Ln = La-Lu

The Tl₂MoO₄-Ln₂(MoO₄)₃-Hf(MoO₄)₂ systems where Ln = La-Lu were studied in the subsolidus region using X-ray powder diffraction. Quasi-binary joins were revealed, and triangulation carried out. New ternary molybdates were prepared: Tl₅LnHf(MoO₄)₆ (5: 1: 2) for Ln = Ce-Ho, Tl₅LnHf(MoO₄)₆ (5: 1: 2) for Ln = Er-Lu, TlLnHf_0.5(MoO₄)₃ (1: 1: 1) for Ln = Ce-Nd, and Tl₂LnHf₂(MoO₄)_6.5 (2: 1: 4) for Ln = Ce-Lu. The crystallographic parameters of Tl₅LnHf(MoO₄)₆ (5: 1: 2) compounds for Ln = Er-Lu were determined.     

Sm<Subscript>2</Subscript>S<Subscript>3</Subscript>-Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

The Sm₂S₃-Sm₂O₃ phase diagram was studied by physicochemical methods of analysis from 800 K up to melting. Two oxysulfides are formed in the system: Sm₁₀S₁₄O with tetragonal crystal structure (space group I41/acd; unit cell parameters: a = 1.4860 nm, c = 1.9740 nm; microhardness: H = 4700 MPa; solid decomposition temperature: 1500 K) and Sm₂O₂S with hexagonal structure (space group P-3m1; a = 0.3893 nm, c = 0.6717 nm; H = 4500 MPa; congruent melting temperature: 2370 K). Within the extent of the Sm₂O₂S-based solid solution (61–70 mol % Sm₂O₃) at 1070 K, a singular point appears at the compound composition on property-composition curves. The eutectic coordinates: 23 mol % Sm₂O₃ and 1850 K; 80 mol % Sm₂O₃ and 2290 K.     

Synthesis and structure of [UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>){CONH<Subscript>2</Subscript>N(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

The single crystals of [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] were synthesized and studied by X-ray diffraction. The crystals are monoclinic, a = 7.461(2) Å, b = 8.828(2) Å, c = 11.756(2) Å, β = 107.21(3)°, space group Pc, Z = 2, R = 2.94%. The structure comprises infinite chains [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] extended along [001] and corresponding to the AT¹¹M ₂ ¹ crystallochemical group (A = UO ₂ ²⁺ , T¹¹ = C₂O ₄ ^2? , M¹ = N,N-CONH₂N(CH₃)₂) of uranyl complexes. The chains are connected into a three-dimensional framework by hydrogen bonds involving the oxygen atoms of oxalate and uranyl ions and the N,N-dimethylcarbamide methyl groups.     

LiF-LiCl-LiVO<Subscript>3</Subscript>-Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>-Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript> system

Phase equilibria in the LiF-LiCl-LiVO₃-Li₂SO₄-Li₂MoO₄ system have been studied by differential thermal analysis. The eutectic composition has been determined as follows (mol %): LiF, 17.4; LiCl, 42.0; LiVO₃, 17.4; Li₂SO₄, 11.6; and Li₂MoO₄, 11.6, with the melting temperature equal to 363°C and the enthalpy of melting equal to (284 ± 7) kJ/kg.     

Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

Phase relations in the Y₂O₃-Ga₂O₃ system were studied by the anneal-and-quench technique in air within 1000–2300°C, and a phase diagram was plotted. Three compounds were found to form: Y₃GaO₆, Y₄Ga₂O₉, and Y₃Ga₅O₁₂; the temperature and concentration bounds of stability were determined for these compounds. Indexing results for Y₃GaO₆ are given.     

Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

The phase diagram of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript>-Ag<Subscript>2</Subscript>O system

The results concerning the synthesis, structure and thermal properties of V₂O₅-MoO₃-Ag₂O samples in the molybdenum rich region of ternary system are presented in the form of quasi-binary systems: β-AgVO₃-β-Ag₂MoO₄, AgVMoO₆-MoO₃, AgVMoO₆-Ag₂Mo₄O₁₃, AgVMoO₆-Ag₂Mo₂O₇, AgVMoO₆-β-Ag₂MoO₄ and also of the system in which at V₂O₅/MoO₃ molar ratio 3:7 the content of Ag₂O was variable. The ternary phase AgVMoO₆ was not described earlier in the literature.     

Structure and some properties of [UO<Subscript>2</Subscript>(SeO<Subscript>4</Subscript>)(C<Subscript>5</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>O)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)]

The complex [UO₂(SeO₄)(C₅H₁₂N₂O)₂(H₂O)] (I) was synthesized and studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are orthorhombic: a = 13.1661(3) Å, b = 16.4420(5) Å, c = 17.4548(6) Å, Pbca, Z = 8, R = 0.0423. The structural units of crystal I are chains with the composition coinciding with that of the compounds of the AB₂M ₃ ¹ crystal chemical group of the uranyl complexes (A = UO ₂ ²⁺ , B² = SeO ₄ ^2? , M¹ = C₅H₁₂N₂O and H₂O).     

Trends in the cation distribution in the structures of the compounds forming in the Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> systems

The cationic networks in the structures of the initial oxides and all binary and ternary compounds forming in the Ln₂O₃-GeO₂-P₂O₅ systems have been studied. In the phase diagrams of the Nd₂O₃-GeO₂-P₂O₅ and Er2O₃-GeO₂-P₂O₅ systems, the regions of the structural influence of individual compounds with topologically identical cationic networks—anisotropic (A), combined (C), and isotropic (I)—are united into common areas. The A: C: I area ratio is 1: 1: 1 in the neodymium system and 1.7: 1: 3.4 in the erbium system.     

Structure and some properties of [UO<Subscript>2</Subscript>CrO<Subscript>4</Subscript>{CH<Subscript>3</Subscript>CON(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

A new complex [UO₂CrO₄{CH₃CON(CH₃)₂}₂] (I) was studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are monoclinic: a = 13.8108(11) Å, b = 8.6804(7) Å, c = 13.0989(10) Å, β = 104.777(1)°, V = 1518.4(2) ų, space group P2₁/c, Z = 4, R = 2.39%. The structure of I contains infinite chains of the [UO₂CrO₄{CH₃CON(CH₃)₂}₂] composition running along [001]; the complex belongs to the AT¹¹M¹ ₂ crystal-chemical group (A = UO ₂ ²⁺ , T¹¹ = CrO ₄ ^2? , M¹ = CH₃CON(CH₃)₂) of uranyl complexes. The chains are linked into a three-dimensional framework due to hydrogen bonds between oxygen atoms of chromate ions and hydrogen atoms of methyl groups of the dimethylacetamide.     

Supramolecular 2D structure of [Co(2-Me-Pyz)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The complex [Co(2-Me-Pyz)₂(H₂O)₄](NO₃)₂ is synthesized and its structure is determined. The crystals are monoclinic: space group P2₁/n, a = 10.685(2) Å, b = 6.837(1), c = 12.515(3) Å, β = 91.84(3)°, V = 913.8(3) ų, ρ_calcd = 1.042 g/cm ³, Z = 2. The Co²⁺ ion (in the inversion center) is coordinated at the vertices of the distorted octahedron by two nitrogen atoms of methylpyrazine and four oxygen atoms of the water molecules (Co(1)–N(1) 2.180(3), average Co(1)–O(w) 2.079(3) Å, angles at the Co atom 87.9(1)–92.1(1)°). Supramolecular pseudometallocycles are formed in the structure through the O(w)–H…N(1) hydrogen bonds between the coordinated H₂O molecules and the terminal nitrogen atoms of the 2-methylpyrazine molecules. Their interaction results in the formation of supramolecular layers joined by the NO₃ groups into a three-dimensional framework.     

Advanced Bi<Subscript>2</Subscript>O<Subscript>2.7</Subscript>/Bi<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript> composite film with enhanced visible-light-driven activity for the degradation of organic dyes

Bi₂O_2.7/Bi₂Ti₂O₇ composite photocatalyst films are synthesized by sol–gel dip-coating. The ratio of adding Bi and Ti precursors can be controlled during the preparation process. The phase structure is confirmed by X-ray diffraction. The UV–visible diffuse reflectance spectrum shows that the composite catalysts present light absorption in the visible region. The obtained Bi₂O_2.7/Bi₂Ti₂O₇ composite films possess superior photocatalytic degradation of rhodamine B, owing to the visible light response of Bi₂O_2.7 and the separation of photogenerated electrons and holes between the two components. As a result, the Bi₂O_2.7/Bi₂Ti₂O₇ (Bi/Ti = 1:1) displays the highest photocatalytic activity under visible light or UV light irradiation for the degradation of different organic dyes, including methyl blue, methyl orange and acid orange 7.     

Kinetics of phase formation upon the treatment of La<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript> and La<Subscript>2</Subscript>O<Subscript>2</Subscript>SO<Subscript>4</Subscript> in a hydrogen flow

The sequence of phases occurring during treatment of lanthanum sulfate, La₂(SO₄)₃ and lanthanum oxysulfate, La₂O₂SO₄ in a hydrogen flow is established. The temperature ranges in which homogeneous La₂O₂S is produced are revealed: when La₂(SO₄)₃ is a precursor, the range is 770–1220 K; in the case of La₂O₂SO₄, the interval is 950–1220 K. The kinetic curves showing the time dependence of the yield of La₂O₂S is constructed and treated using the Avrami-Erofeev and contracting volume equations. The activation energies of the reactions are determined.     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Phase relations in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system in the subsolidus region

Phase relations in the CaO-Bi₂O₃-B₂O₃ system have been investigated by X-ray powder diffraction and differential thermal analyses, and the isothermal section at 600°C has been constructed. The formation of ternary compounds at the component ratios 1CaO: 1Bi₂O₃: 1B₂O₃ (CaBi₂B₂O₇) and 1CaO: 1Bi₂O₃: 2B₂O₃ (CaBi₂B₄O₁₀) has been established X-ray diffraction characteristics of these phases are presented.     

No-Glycerol rapid heterogeneous biodiesel production on K<Subscript>2</Subscript>CO<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by coupling process

Biodiesel containing almost no glycerol has been produced by coupling reaction carried out over K₂CO₃ supported by calcium oxide as solid base catalysts. The solid base catalysts synthesized by wet impregnation exhibit an exceedingly high activity in biodiesel production. It was found that the reaction time required for the highest yield of biodiesel, 99.2%, can be shortened to 30 min over K₂CO₃/Al₂O₃ under the optimum reaction conditions: 8: 1: 1 molar ratio of methanol/DMC/oil, 30 wt % K₂CO₃/Al₂O₃ catalyst, and 65°C reaction temperature. Solid basic catalysts examined in the study were characterized by BET surface area, XRD, CO₂-TPD, and SEM techniques. The strong interaction between K₂CO₃ and the support yields a new basic active site, which can be probably responsible for the high activity of K₂CO₃/Al₂O₃.