Synthesis,spectroscopy and structures of halogen and sulfur-bridged dinuclear silver(I) complexes with N1-substituted thiophene-2-carbaldehyde thiosemicarbazone

The reactions of silver(I) halides (Cl or Br) with thiophene-2-carbaldehyde N¹-methyl thiosemicarbazone (HttscMe) in the presence of Ph₃P (1:1:1 molar ratio) yield halogen-bridged dimers, [Ag₂(μ-X)₂(η¹-S-HttsMe)₂(PPh₃)₂] (X = Cl, 1; Br, 2). The use of 2,2′-bipyridine in lieu of Ph₃P in the reaction of silver(I) chloride with HttscMe yields the sulfur-bridged dimer, [Ag₂(μ-S-HttscMe)₂(η¹-HttsMe)₂] · 2CHCl₃ 3. The substituents have altered the nature of bridge between the two silver atoms. The Ag···Ag separation (3.4867(5) Å) in complex 3 is less than that in the halogen-bridged dimers (3.734(4) Å 1; 3.746(5) Å 2). Unlike PPh₃ the co-ligand 2,2′-bipyridine did not coordinate to the silver center, but was necessary for crystallization in the reaction with the thio-ligand. NMR spectroscopy revealed that the complexes remained unchanged in the solution state (CDCl₃).     

Preparation and characterization of cobalt-containing alcohols and diols

A series of cobalt-containing alcohols and diols were prepared and characterized. Intramolecular hydrogen-bonding was observed for the cobalt-containing diols [Co₂(CO)₆(μ-η-(HO)R₁R₂CCCCR₁R₂(OH)] (1: R₁ = CH₃, R₂ = C₂H₅; 2: R₁ = CH₃, R₂ = C₃H₇), [Co₂(CO)₆(μ-η-(HO)Ph₂CCCCPh₂(OH)] (3) and [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ-η-(HO)Ph₂CCCCPh₂(OH)] (4). Potentially all the four compounds could serve as chelating O,O-ligands. In principle, it is possible for compounds [(μ-PPh₂NHPPh₂)Co₂(CO)₄(μ-η-HCCCPh₂OH)] (5b), [Co₂(CO)₆(μ-η-HCCC₂H₄OH] (6) and [Co₂(CO)₆(μ-η-HCCC₃H₆OH)] (7) in their syn-conformations to behave as chelating O,N-ligands. To the best of our knowledge, compounds 5b, 6 and 7 are the first reported examples of PPh₂NHPPh₂-bridged dicobalt complexes.     

Seven-membered Pd(II) complexes containing symmetric phosphorus ylides: Synthesis,characterization and high catalytic activity toward Suzuki cross-coupling reactions

The reaction of 1,2-bis(diphenylphosphino)ethane (dppe) with various ketones in acetone produces the new phosphonium salts [RC(O)CH₂PPh₂(CH₂)₂PPh₂CH₂C(O)R]X₂ (R = 2-naphtyl, X = Br (1); R = 2,4-dichlorophenyl, X = Cl (2); R = 3-nitrophenyl, X = Br (3)). Further treatment with a base gives the symmetrical phosphorus ylides, RC(O)CHPPh₂(CH₂)₂PPh₂CHC(O)R (R = 2-naphtyl (4), 2,4-dichlorophenyl (5), 3-nitrophenyl (6)). These ligands react with Pd(II) chloride to form C,C-chelated complexes with the composition [RC(O)CHPPh₂(CH₂)₂PPh₂CHC(O)R]PdCl₂, where R = 2-naphtyl (7), 2,4-dichlorophenyl (8), 3-nitrophenyl (9). These compounds have been characterized by elemental analysis and spectroscopic methods and consist of seven-membered rings formed by the coordination of the ligands through the two ylidic carbon atoms to the metal center. The structure of compound 5 has been characterized crystallographically. The palladium complex 9 is employed in the Suzuki cross-coupling reaction between phenylboronic acid and several aryl halides. It was found to be a competent catalyst for a variety of substrates to afford the coupled products in high yields using DMF as a solvent. The biaryl products were obtained under aerobic conditions in short reaction times with a lower loading of the catalyst (0.001 mol%).     

Dinuclear ruthenium(I) complexes of the type [Ru2(CO)4L2] with carboxylate or 2-pyridonate ligands: Evaluation as catalysts for olefin cyclopropanation with diazoacetates

Dinuclear ruthenium(I,I) carboxylate complexes [Ru₂(CO)₄(μ-OOCR)₂]_n (R = CH₃ (1a), C₃H₇ (1b), H (1c), CF₃ (1d)) and 2-pyridonate complex [Ru₂(CO)₄(μ-2-pyridonate)₂]_n (3) catalyze efficiently the cyclopropanation of alkenes with methyl diazoacetate. High yields are obtained with terminal nucleophilic alkenes (styrene, ethyl vinyl ether, α-methylstyrene), medium yields with 1-hexene, cyclohexene, 4,5-dihydrofuran and 2-methyl-2-butene. The E-selectivity of the cyclopropanes obtained from the monosubstituted alkenes and the cycloalkenes decreases in the order 1b > 1a > 1d > 1c. The cyclopropanation of 2-methyl-2-butene is highly syn-selective. Several complexes of the type [Ru₂(CO)₄(μ-L¹)₂]₂ (4) and (5), [Ru₂(CO)₄(μ-L¹)₂L²] (L² = CH₃OH, PPh₃) (6)–(9) and [Ru₂(CO)₄(CH₃CN)₂(μ-L¹)₂] (10) and (11), where L¹ is a 6-chloro- or 6-bromo-2-pyridonate ligand, are also efficient catalysts. Compared with catalyst 3, a halogen substituent at the pyridonate ligand affects the diastereoselectivity of cyclopropanation only slightly.     

[MoFe3S4]3+ and [MoFe3S4]2+ cubane clusters containing a pentamethylcyclopentadienyl molybdenum moiety

A series of organometallic molybdenum/iron/sulfur clusters of the general formula [Cp¹MoFe₃S₄L_n]^m (Cp¹ = η⁵-C₅Me₅; L = S^tBu, SPh, Cl, I, n = 3, m = 1−; L_n = I₂(P^tBu₃), m = 0; L = 2,6-diisopropylphenylisocyanide (ArNC), n = 7, m = 1+) have been synthesized. A cubane cluster (PPh₄)[Cp¹MoFe₃S₄(S^tBu)₃] (2) was isolated from a self-assembly reaction of Cp¹Mo(S^tBu)₃ (1), FeCl₃, LiS^tBu, and S₈ followed by cation exchange with PPh₄Br in CH₃CN, while an analogous cluster (PPh₄)[Cp¹MoFe₃S₄(SPh)₃] (3) was obtained from the Cp¹MoCl₄/FeCl₃/LiSPh/PPh₄Br reaction system or from a ligand substitution reaction of 2 with PhSH. Treatment of 2 with benzoyl chloride gave rise to (PPh₄)[Cp¹MoFe₃S₄Cl₃] (4), which was in turn converted to (PPh₄)[Cp¹MoFe₃S₄I₃] (5) by the reaction with NaI. A neutral cubane cluster Cp¹MoFe₃S₄I₂(P^tBu₃) (6) was generated upon treating 5 with P^tBu₃. Although reduction of 4 by cobaltocene under the presence of ArNC resulted in a disproportionation of the cubane core to give Fe₄S₄(ArNC)₉Cl (7), a similar reduction reaction of 5 produced [Cp¹MoFe₃S₄(ArNC)₇]I (8), where the MoFe₃S₄ core was retained. The crystal structures of 4–6, and 8 were determined by the X-ray analysis.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Diiron chelate complexes relevant to the active site of the iron-only hydrogenase

A novel unsymmetrically disubstituted propanedithiolate compound [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)] (1) (pdt = SCH₂CH₂CH₂S, dmpe = Me₂PCH₂CH₂PMe₂) was synthesized by treatment of [Fe₂(CO)₆(μ-pdt)] with dmpe in refluxing THF. Compound 1 was characterized by single-crystal X-ray diffraction analysis. Protonation of 1 with HBF₄·Et₂O in CH₂Cl₂ gave at room temperature the μ-hydrido derivative [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)(μ-H)](BF₄)] (2). At low temperature, ¹H and ³¹P–{¹H} NMR monitoring revealed the formation of a terminal hydride intermediate 3. Comparison of these results with those of a VT NMR study of the protonation of symmetrical compounds [Fe₂(CO)₄L₂(μ-pdt)] [L = PMe₃, P(OMe)₃] suggests that in disubstituted bimetallic complexes [Fe₂(CO)₄L₂(μ-pdt)], dissymmetry of the complex is required to observe terminal hydride species. Attempts to extend the series of chelate compounds [Fe₂(CO)₄(κ²-L₂)(μ-pdt)] by using arphos (arphos = Ph₂AsCH₂CH₂PPh₂) were unsuccessful. Only mono- and disubstituted derivatives [Fe₂(CO)_6−n(Ph₂AsCH₂CH₂PPh₂)_n(μ-pdt)] (n = 1, 4a; n = 2, 4b), featuring dangling arphos, were isolated under the same reaction conditions of formation of 1. Compound 4b was structurally characterized.     

Synthesis,structure, and property of a triruthenium cluster having a μ-alkyl ligand: Transformation of a μ3(⊥)-alkyne ligand into a μ-alkyl ligand via a μ3-vinylidene complex

A triruthenium μ-alkyl complex, (Cp¹Ru)₃(μ-η²-HCHCH₂R)(μ-CO)₂(μ₃- CO) (2a, R = Ph; 2b, R = ^tBu, Cp¹ = η⁵-C₅Me₅), which contains a two-electron and three-center interaction among Ru, C, and H atoms, has been synthesized by the reaction of a perpendicularly coordinated 1-alkyne complex, {Cp¹Ru(μ-H)}₃(μ₃-η²:η²(⊥)-RCCH) (1a; R = Ph, 1b; R = ^tBu), with carbon monoxide. A diffraction study for 2b clearly represented the bridging neohexyl group on one Ru–Ru edge. This μ-alkyl group exhibited dynamic behavior resulting in site-exchange of the α-hydrogen atoms between the terminal and bridging positions, which was synchronized with the migration of the μ-alkyl groups between the two ruthenium atoms. The agostic C–H bond was readily cleaved upon pyrolysis. Whereas the μ-phenethylidene intermediate resulting from the σ-C–H bond cleavage has never been observed, a μ₃-phenethylidyne complex, {Cp¹Ru(μ-CO)}₃(μ₃-CCH₂Ph) (7a), and a μ₃-methylidyne complex, {Cp¹Ru(μ-CO)}₃(μ₃-CH) (8), were obtained by the successive C–H/C–H and C–H/C–C bond cleavages at the μ-alkyl moiety, respectively.     

Synthesis,characterization and fluorescence properties of hexanuclear zinc(II) complexes

Two hexanuclear zinc(II) complexes, [Zn₆(L¹)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · CH₃CN (1 · CH₃CN) and [Zn₆(L²)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · 4CH₃CN (2 · 4CH₃CN), where HL¹ = 4-methyl-2,6-bis(cyclohexylmethyliminomethyl)-phenol and HL² = 4-methyl-2,6-bis(1-naphthalylmethyliminomethyl)-phenol, have been synthesized and characterized by elemental analysis, FT-IR and fluorescence spectroscopic methods, and by X-ray diffraction analysis. In the asymmetric unit of complex 1, two of the three zinc atoms have pentacoordinate geometries and the other is tetrahedrally coordinated, whereas the three distinct Zn atoms in complex 2 adopt three different coordination environments, namely distorted octahedral, trigonal bipyramidal and tetrahedral. The fluorescence properties of the ligands and complexes have been investigated.     

Insertion of ketenes into lanthanocene n-butylamide and imidazolate complexes

Reaction of Cp₂LnNHⁿBu with 1 equiv. of Ph₂CCO in toluene affords dimeric complexes [Cp₂Ln(OC(CHPh₂)NⁿBu)]₂ [Ln = Yb (1), Dy (2)], derived from a formal insertion of the CC bond of the ketene into the N–H bond. Treatment of CpErCl₂ with 2 equiv. of LiNHⁿBu followed by reacting with Ph₂CCO affords a rearrangement product [Cp₂Er(OC(CHPh₂)NⁿBu)]₂ (3). Treatment of [Cp₂Ln(μ-Im)]₃ (Im = imidazolate) with PhRCCO gives [Cp₂Ln(μ-OC(Im)CPhR)]₂ [R = Et, Ln = Yb (4); R = Ph, Ln = Yb (5), Er (6)]. In contrast to the previous observations that [Cp₂ErNⁱPr₂]₂ and [Cp₂ErNHEt]₂ react with ketenes to give di-insertion products, in the present cases the presence of excess of ketenes has no influence on the final product even with prolonged heating and only monoinsertion products are isolated. All these complexes were characterized by elemental analysis, IR and mass spectroscopies. The structures of complexes 1 and 3–6 were also determined through X-ray single crystal diffraction analysis.     

Synthesis and X-ray structures of heptanuclear and decanuclear mixed-metal sulfido clusters containing noble metals and Group 15 metals

Reactions of incomplete cubane-type clusters [(Cp°RuCl)₂(μ-SH)(μ-SM′Cl₂)] (M′ = Sb (2a), Bi; Cp° = η⁵-C₅Me₄Et) with 0.5 equiv of [PdCl₂(cod)] (cod = 1,5-cyclooctadiene) afforded the corner-shared double cubane-type clusters [{(Cp°Ru)(Cp°RuCl)(μ-SM′Cl₂)}₂(μ₃-S)₂(μ-Cl)₂Pd] (3a: M′ = Sb, 3b: M′ = Bi) in moderate yields, whereas treatment of 2a with 0.75 equiv of [PdCl₂(cod)] gave the corner-shared triple cubane-type cluster [{(Cp°Ru)(Cp°RuCl)(μ-SSbCl₂)(μ₃-S)₂(μ-Cl)₂Pd}₂(Cp°Ru)₂] (4). Single-crystal X-ray analyses have disclosed the detailed structures of novel heptanuclear and decanuclear mixed-metal cores for 3a and 4, respectively.     

Reaction of isocyanides with iminophosphorane-based carbene ligands: Synthesis of unprecedented ketenimine–ruthenium complexes

The RuC bond of the bis(iminophosphorano)methandiide-based ruthenium(II) carbene complexes [Ru(η⁶-p-cymene)(κ²-C,N-C[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et (1), Ph (2)) undergoes a C–C coupling process with isocyanides to afford ketenimine derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNR′)[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et, R′ = Bz (3a), 2,6-C₆H₃Me₂ (3b), Cy (3c); R = Ph, R′ = Bz (4a), 2,6-C₆H₃Me₂ (4b), Cy (4c)). Compounds 3–4a–c represent the first examples of ketenimine–ruthenium complexes reported to date. Protonation of 3–4a with HBF₄ · Et₂O takes place selectively at the ketenimine nitrogen atom yielding the cationic derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNHBz)[P{NP(O)(OR)₂}Ph₂]₂)][BF₄] (R = Et (5a), Ph (6a)).     

New derivatives of an enneanuclear Mn SMM

The reaction of the neutral triangular species [Mn₃O(O₂CR)₆L₃] (R = Me, Ph, CMe₃; L = py) with the tripodal ligands H₃tmp (1, 1, 1-tris(hydroxymethyl)propane) and H₄peol (pentaerythritol) affords the enneanuclear complexes [Mn₉O₇(O₂CMe)₁₁(tmp)(py)₃(H₂O)₂] (2); [Mn₉O₇(O₂CMe)₁₁(Hpeol)(py)₃(H₂O)₂] (3); [Mn₉O₇(O₂CCMe₃)₁₁(Hpeol)(py)₃(H₂O)₂] (4); and [Mn₉O₇(O₂CPh)₁₁(Hpeol)(py)₃(H₂O)₂] (5). Complexes 2–5 are characterized by spin ground states of S = 17/2 with axial zero-field splitting parameters in the range D = −0.26–0.30 cm⁻¹. Sweep-rate and temperature dependent hysteresis loops diagnostic of SMM behaviour are observed below 1.2 K featuring steps at regular intervals of field.     

Reactions of a hydrido(hydrosilylene)tungsten complex with oxiranes

Reactivity of a hydrido(hydrosilylene)tungsten complex, Cp¹(CO)₂(H)WSi(H)[C(SiMe₃)₃] (1), toward oxiranes was investigated. Treatment of 1 with racemic mono-substituted oxiranes with a substituent R (R = Ph, vinyl, ^tBu, or ⁿBu) at room temperature produced dihydrido(vinyloxysilyl)tungsten complexes, (E)- and/or (Z)-Cp¹(CO)₂(H)₂W{Si(H)(OCHCHR)[C(SiMe₃)₃]} [(E/Z)-2: R = Ph, (E)-3: R = vinyl, (E)-4: R = ^tBu, (E/Z)-5: R = ⁿBu] in high yields via regioselective ring-opening of oxiranes. When the substituent R on oxirane was relatively large, (E)-isomers (2, 3, and 4) were obtained predominantly (87–97%), while the substituent was a relatively small ⁿBu group, an approximately 1:1 mixture of (E)- and (Z)-isomers [(E/Z)-5] was obtained. Reaction of 1 with 2,2-dimethyloxirane afforded the corresponding complex, Cp¹(CO)₂(H)₂W{Si(H)(OCHCMe₂)[C(SiMe₃)₃]} (6), quantitatively. A reaction mechanism is also discussed.     

Synthesis and reactions of heterodinuclear organopalladium–cobalt complexes acting as copolymerization catalyst for aziridine and carbon monoxide

A series of heterodinuclear acylpalladium–cobalt complexes having a bidentate nitrogen ligand, L₂(RCO)Pd–Co(CO)₄ (L₂ = bpy, R = Me (5), Ph (6); L₂ = tmeda, R = Me (7), Ph (8); L₂ = phen, R = Me (9), Ph (10)) are prepared by metathetical reactions of PdRIL₂ with Na⁺[Co(CO)₄]⁻ followed by treatment with CO. These complexes are characterized by NMR and IR spectroscopies and elemental analyses, and the molecular structures of 6, 8, and 9 are determined by X-ray structure analysis. Geometry at Pd is essentially square planar and the Co atom is considered to have d¹⁰ tetrahedral structure, where cobalt(-I) anion coordinates to palladium(II) cation. Heterodinuclear organopalladium–cobalt complexes are shown to catalyze copolymerization of aziridines and CO under mild conditions. Reaction of (dppe)MePd–Co(CO)₄ (1) with aziridine gives a cationic (aziridine)palladium(II) complex with [Co(CO)₄]⁻ anion, [PdMe(aziridine)(dppe)]⁺[Co(CO)₄]⁻ (13).     

Ruthenium carbonyl clusters derived from pyrazolyl substituted diphosphazanes: Crystal and molecular structure of a triruthenium cluster featuring a triply bridging μ3-η1:η1:η1 coordination mode of pyrazolate moiety

The radical initiated reactions of Ru₃(CO)₁₂ with pyrazolyl substituted diphosphazanes Ph₂PN(R)PPh(N₂C₃HMe₂-3,5) [R = (S)-*CHMePh (1) or CHMe₂ (2)] proceed via P–N(pyrazole) bond rupture resulting in the formation of phosphido clusters, [Ru₃(CO)₅(μ_sb-CO)₂(μ₃-N,N′-η¹:η¹:η¹-N₂C₃HMe₂-3,5){μ-P,P′-Ph₂PN(R)PPh}] [R = (S)-*CHMePh (3) or CHMe₂ (4)]. The pyrazolate moiety adopts an unusual triply bridging μ₃-η¹:η¹:η¹-mode of coordination in these clusters.     

Synthesis of open-framework iron phosphates, [C5N2H14]2[FeIII2F2(HPO4)4]·2H2O and [C5N2H14][FeIII4(H2O)4F2(PO4)4], with one- and three-dimensional structures

The hydrothermal syntheses and structures of two new open-framework iron phosphates, [C₅N₂H₁₄]₂[Fe^III₂F₂(HPO₄)₄]·2H₂O, I, and [C₅N₂H₁₄][Fe^III₄(H₂O)₄F₂(PO₄)₄], II, are presented. While the structure of I consist of FeO₄F₂ octahedra and HPO₄ terahedra linked to form one-dimensional structure, that of II consist of FeO₄(H₂O)₂, FeO₄(H₂O)F, FeO₄F₂ and PO₄ units connected to give rise to a three-dimensional structure. The structure of I resembles the naturally occurring mineral tancoite while II resembles the iron phosphate, ULM-12, [C₆N₂H₁₄][Fe₄(PO₄)₂F₂(H₂O)₃]. Magnetic susceptibility studies indicate anti-ferromagnetic behavior in both the compounds with T_N=200 and 175 K for I and II, respectively. Crystal data: I, monoclinic, space group=P2₁/n (no. 14). a=7.2261(6), b=16.5731(14), c=11.0847(10) Å, β=97.265(2)°, V=1316.8(2) Å³, Z=4, ρ_calc=1.952 g cm⁻¹, μ_(MoKα)=1.446 mm⁻¹, R₁=0.0448 and wR₂=0.1141 for 1882 data [I>2σ(I)]; for II, monoclinic, space group=P2₁/n (no. 14). a=9.9691(3), b=12.4013(3), c=17.3410(3) Å, β=103.762(1)°, V=2082.32(9) Å³, Z=4, ρ_calc=2.576 g cm⁻¹, μ_(MoKα)=3.162 mm⁻¹, R₁=0.0510 and wR₂=0.1064 for 2979 data [I>2σ(I)].     

Synthesis and characterization by diffraction and 31P- and 77Se-NMR spectroscopy of [Mo3(μ3-Se)(μ2-Se2)3{N(SePPh2)2}3]Br and [Mo3(μ3-Se)(μ2-Se2)3{Se2P(OCH2CH3)2}3]Br

The new Mo/Se clusters [Mo₃(μ₃-Se)(μ₂-Se₂)₃{N(SePPh₂)₂}₃]Br (1) and [Mo₃(μ₃-Se)(μ₂-Se₂)₃{Se₂P(OCH₂CH₃)₂}₃]Br (2) have been synthesized by the selective substitution of the bromo ligands in the starting material [PPh₄]₂[Mo₃(μ₃-Se)(μ₂-Se₂)₃Br₆] with the selenoorgano bidentate ligands [N(SePPh₂)₂]^– and [Se₂P(OEt)₂]^–. The complexes have been characterized in solution by ³¹P- and ⁷⁷Se-NMR spectroscopy and in the solid state by single crystal X-ray diffraction; the same cation structures are present both in solution and in the solid state. Crystallographic data for 1: [Mo₃(μ₃-Se)(μ₂-Se₂)₃{N(SePPh₂)₂}₃]Br·3 CH₂Cl₂, C₇₂H₆₀BrMo₃N₃P₆Se₁₃·3 CH₂Cl₂, trigonal, space group R₃, a=21.299 (10) Å, c=38.433 (27) Å, V=15 100 (15) ų, T=−120 °C, Z=6; crystallographic data for 2: Mo₃(μ₃-Se)(μ₂-Se₂)₃{Se₂P(OCH₂CH₃)₂}₃]Br, C₁₂H₃₀BrMo₃P₃O₃Se₁₃, monoclinic, space group P2₁/n, a=13.404 (2) Å, b=22.732 (4) Å, c=13.932 (3) Å, β=113.134 (3)°, V=3 903.7(12) ų, T=−120 °C, Z=4. © 2000 Académie des sciences / Éditions scientifiques et médicales Elsevier SASphosphine ligands / amine ligands / phosphate ligands / selenium / molybdenum cluster / ⁷⁷Se-NMR spectroscopy     

Protophilicity,electrochemical property,and desulfurization of diiron dithiolate complexes containing a functionalized C2 bridge with two vicinal basic sites

Two diiron dithiolate complexes [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅L] (L = PPh₃, 2; P(Pyr)₃, 3) containing a functionalized C₂ bridge with two vicinal basic sites were prepared and characterized as models of the FeFe-hydrogenase active site. The molecular structures of 2 and its N-protonated form [(2H_N)(OTf)] were determined by X-ray analyses of single crystals. In the solid state of [(2H_N)(OTf)]. Each asymmetric unit contains a molecule of [(2H_N)(OTf)] and a molecule of water. The molecule of water is close to the iron atom of the [Fe(CO)₃] unit (Fe···O(H₂O), 4.199 Å). The complexes 2 and 3 are relatively protophilic. ³¹P NMR spectra and cyclic voltammograms show that they can be protonated by the mild acids CCl₃COOH and CF₃COOH. Electrochemical studies show that the first reduction peak of 3 at ?1.51 V versus Fc⁺/Fc is 110 mV more positive than that (?1.62 V) found for the analogous diiron azadithiolate complex [{(μ-SCH₂)₂N(CH₂C₆H₅)}Fe₂(CO)₅P(Pyr)₃] (7). Protonation of 2 and 3 leads to the anodic shifts of 610–650 mV for the Fe^IFe^I/Fe^IFe⁰ reduction potentials. The shifts are apparently larger than that (450 mV) for protonation of 7. The reaction of the all-carbonyl complex [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅L] with two equivalents of bis(diphenylphosphino)methane (dppm) in refluxing toluene affords a desulfurized complex [(μ-S)(μ-dppm)₂Fe₂(CO)₄] (6). The reaction process was studied. A dppm mono-dentate intermediate [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅(κ¹-dppm)] (4) and a dppm μ-bridging species [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₄(μ-dppm)] (5) have been isolated and spectroscopically characterized.