An Organic-inorganic Hybrid Assembly Based on Novel Arsenatomolybdate and Cu~Ⅰ-Organic Units

A novel organic-inorganic hybrid arsenatomolybdate based on infrequent[AsMo_4O_(14)(OH)_2]~(3-)unit,[Cu ~I(phen)_2]_3[AsMo_4O_(14)(OH)_2]·3H_2O(1,phen=1,10-phenanthroline),has been hydrothermally synthe-sized.This structure was determined by single-crystal X-ray diffraction analysis,and further characterized by elemental analysis,and IR and UV spectra.To the best of our knowledge,it is the first report of a novel arsenatomolybdate subunit[AsMo_4O_(14)(OH)_2]~(3-).Photoluminescence of 1 is ascribed to???*emission of the aromatic rings derived from the phen ligand.     

BN- and BO-Doped Inorganic–Organic Hybrid Polymers with Sulfoximine Core Units

While polysulfones constitute a class of well-established, highly valuable applied materials, knowledge about polymers based on the related sulfoximine group is very limited. We have employed functionalized diaryl sulfoximines and a p-phenylene bisborane as building blocks for unprecedented BN- and BO-doped alternating inorganic–organic hybrid copolymers. While the former were accessed by a facile silicon/boron exchange protocol, the synthesis of polymers with main-chain B–O linkages was achieved by salt elimination.     

An Organic–Inorganic Hybrid Cathode Based on S–Se Dynamic Covalent Bonds

A diphenyl trisulfide–selenium nanowire (DPTS-Se) organic–inorganic hybrid cathode material is presented for rechargeable lithium batteries. During discharge, three voltage plateaus associated with three lithiation processes are observed. During recharge, the combination of the radicals formed upon delithiation leads to several new phenyl sulfoselenide compounds which are confirmed by HPLC-QTof-MS. The hybrid cathode exhibits superior cycling stability over pristine Se or DPTS as cathode alone. The first discharge shows a capacity of 96.5 % of the theoretical specific capacity and the cell retains 69.2 % of the initial capacity over 250 cycles. The hybrid cathode also shows a high Coulombic efficiency of over 99 % after 250 cycles. This study demonstrates that the combination of organic polysulfide and selenium can not only improve the utilization of active materials but also enhance the cycling performance.     

The First Organic–Inorganic Hybrid Compound Based on Polyoxotungstates and Alkali-tris(imidazolyl) Segments with Electrocatalytic Activity

The first organic–inorganic hybrid compound based on the Keggin polyoxometalate and alkali-N-heterocycle ligand [Na₄(tib)₂(H₂O)₂(α-HBW₁₂O₄₀)]·2H₂O (1) (tib = 1,3,5-tris(1-imidazoly)benzene) was hydrothermally synthesized by utilizing a pH-dependent approach in the POM/Cu/tib reaction systems. X-ray structural analyses reveal that compound 1, formed in pH 5.2, possesses a (3,4,6)-connected 2D net with the (4²·5)(4⁶)(3³·4⁶·5²·6⁴) topology. In addition, electrochemical and electrocatalytic properties of compound 1 were studied by cyclic voltammograms. Compound 1 displayed electrocatalytic activities toward reduction of nitrite.     

Crown Inorganic–Organic Hybrid Composed of Copper-Amino Acid Rings and the Classical Keggin Polyoxoanions

A new crown inorganic–organic hybrid material composed of the Keggin polyoxometalates and transition metal-amino acid coordination complexes, K₂{[KCu₄(gly)₄(OH)₂(H₂O)₂Cl][PW₁₂O₄₀]}₂·19H₂O (1), was synthesized and characterized by elemental analysis, IR spectroscopy, TG analysis and single crystal X-ray diffraction. Compound 1 possesses of a 1D chain structure with a crown-type monomer, which is built up from [PW₁₂O₄₀]^3? building blocks and tetranuclear [KCu₄(gly)₄(OH)₂(H₂O)₂Cl] rings. The [KCu₄(gly)₄(OH)₂(H₂O)₂Cl] ring consists of four Cu²⁺ ions and four gly ligands, which exhibits the crown ether feature binding a potassium ion in its center. Further, two [KCu₄(gly)₄(OH)₂(H₂O)₂Cl] rings linked two Keggin polyoxoanions [PW₁₂O₄₀]^3? into crown inorganic–organic hybrid material. Magnetic study shows the existence of ferromagnetic interactions in compound 1.     

Coordinatively Unsaturated Polynuclear Mixed-Valent Sn<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> and Cu<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> Oxo-Centered Carboxylates

The tetranuclear mixed-valent oxo-cluster [Sn^IISn^IVO(O₂CCF₃)₄]₂ (1) has been prepared by reacting SnCl₂ with AgO₂CCF₃ in a sealed ampoule at 90 °C. Alternatively, 1 was obtained by acidolysis of Ph₃SnSnPh₃ with trifluoroacetic acid in solution. The X-ray diffraction study of 1 revealed the presence of a Sn^IIOSn₂^IVOSn^II core comprised of the penta-coordinated divalent and six-coordinated tetravalent tin atoms. The ¹¹⁹Sn NMR studies confirmed the stability of the cluster in solution and the presence of two different oxidation states of tin. An acidolysis of Ph₃SnSnPh₃ in the presence of [Cu₂^II(O₂CCF₃)₄] followed by sublimation of the resulting product at 90 °C afforded the first trinuclear mixed metal Sn–Cu cluster [(C₆H₅)₂Sn₂^IVCu^IIO(O₂CCF₃)₆] (2). The X-ray diffraction analysis of 2 revealed the presence of two phenyl groups attached to the six-coordinated tin(IV) atoms and the tetragonal pyramidal environment of the copper(II) atom. Both complexes have been obtained free of exogenous ligands.     

Synthesis and Characterization of a Novel 3D Organic–Inorganic Hybrid Framwork Templated by Keggin Anions

A novel 3D compound, {K₃H₂[Cu(Gly)₂]₃BW₁₂O₄₀}·10H₂O 1 (Gly = glycine), has been synthesized and characterized by elemental analyses, IR, TG analyses, cyclic voltammetry, and single-crystal X-ray diffraction. Compound 1 contains square-grid layers constructed by potassium cations and copper-glycine coordination complexes, the [BW₁₂O₄₀]^4? anions as templates are accommodated in the square grids by connecting with the K atoms. The K atoms link [BW₁₂O₄₀]^4? anions from different layers together to yield a 3D novel structure. The crystal data for compounds 1: monoclinic, space group p2(1)/n, a = 18.832(4) Å, b = 16.488(3) Å, c = 20.570(4) Å, β = 106.21(3)°, V = 6133(2) Å³, Z = 4.     

Quantum chemical study of formation of Cu<Superscript>II</Superscript>–Y<Superscript>III</Superscript> metallamacrocyclic complexes based on glycinehydroximate ligands

The process of solution-phase formation of the Cu^II–Y^III 15-metallacrown-5 complexes bearing the glycinehydroximate ligands has been for the first time investigated by methods of quantum chemistry. The DFT modeling at the B3LYP/DGDZVP (PCM) level was carried out for mono-, bi-, and tri-nuclear copper(II) complexes and also for heteronuclear Cu^II–Y^III derivatives as the metallamacrocycle precursors. The dependence of relative stability of these complexes on the Cu^II and Y^III coordination surroundings and also on the mutual positions of ligands was found. The structural (variations of interatomic distances and valence angles), electronic (changes in the atomic charges and electron density), and thermodynamical (enthalpies and Gibbs free energies) regularities of 15-metallacrown-5 formation were revealed. The key role of Y^III cation was established for the process of formation of the polynuclear metallamacrocyclic compound (15-metallacrown-5).     

Rare-Earth–Transition-Metal Organic–Inorganic Hybrids Based on Keggin-type Polyoxometalates and Pyrazine-2,3-dicarboxylate

Five rare-earth–transition-metal (RE–TM) heterometal organic–inorganic hybrids based on Keggin-type silicotungstates and mixed ligands H2pzda (pzda=pyrazine-2,3-dicarboxylate) and en (en=ethylenediamine) (enH2)[Cu(en)2(H2O)]2{[Cu(en)2][Cu(en)2(H2O)][(α-SiW11 O39)RE(H2O)(pzda)]}2⋅n H2O (n≈4; RE=YIII ( 1 ), DyIII ( 2 ), YbIII ( 3 ), and LuIII ( 4 )) and [Cu(en)2(H2O)]2{[Cu(en)2]2[Cu(pzda)2][(α-H2SiW11O39)Ce(H2O)]2}⋅n H2O ( 5 ; n≈8) have been hydrothermally synthesized and structurally characterized. Compounds 1–5 all contain the dimeric mono-RE substituted Keggin [RE(α-SiW11O39)]210− subunits linked by H2pzda ligands. Interestingly, 1–4 exhibit discrete structures, in which the H2pzda ligand acts as a tetradentate ligand to bind the RE and Cu cations, whereas 5 displays a 1D double-chain architecture, in which the H2pzda ligand adopts a new pentadentate mode to connect the Ce and Cu cations. To our knowledge, 1–5 represent the first monovacant Keggin-type silicotungstates containing both RE–TM heterometals and mixed ligands. The luminescence of 2 is derived from the combination of the DyIII cations and H2pzda ligands, whereas the luminescence properties of 1 and 3–5 are attributable to the H2pzda ligands.     

An Organic–Inorganic Hybrid Exhibiting Electrical Conduction and Single-Ion Magnetism

The first three-dimensional (3D) conductive single-ion magnet (SIM), (TTF)₂[Co(pdms)₂] (TTF=tetrathiafulvalene and H₂pdms=1,2-bis(methanesulfonamido)benzene), was electrochemically synthesised and investigated structurally, physically, and theoretically. The similar oxidation potentials of neutral TTF and the molecular precursor [HNEt₃]₂[M(pdms)₂] (M=Co, Zn) allow for multiple charge transfers (CTs) between the SIM donor [M(pdms)₂]ⁿ⁻ and the TTF^.+ acceptor, as well as an intradonor CT from the pdms ligand to Co ion upon electrocrystallisation. Usually TTF functions as a donor, whereas in our system TTF is both a donor and an accepter because of the similar oxidation potentials. Furthermore, the [M(pdms)₂]ⁿ⁻ donor and TTF^.+ acceptor are not segregated but strongly interact with each other, contrary to reported layered donor–acceptor electrical conductors. The strong intermolecular and intramolecular interactions, combined with CT, allow for relatively high electrical conductivity even down to very low temperatures. Furthermore, SIM behaviour with slow magnetic relaxation and opening of hysteresis loops was observed. (TTF)₂[Co(pdms)₂] ( 2-Co ) is an excellent building block for preparing new conductive SIMs.     

Synthesis of heteropolynuclear Cu<Superscript>I</Superscript> and Pd<Superscript>II</Superscript> complexes with polymeric 2,2′-biquinoline-containing ligands and investigation of their catalytic activity in the Sonogashira couplings

A method for electrosynthesis of heteropolynuclear biquinoline-containing Cu^I and Pd^II complexes using sacrificial Cu and Pd anodes was developed. The sequence of anode dissolution (first Pd and then Cu) was important for the synthesis of the complex. The opposite sequence of dissolution resulted in oxidation of the initially formed Cu^I ions to Cu^II. The obtained Cu^I and Pd^II complexes with polymer ligands had high catalytic activity in the reaction of aryl halides with phenylacetylene giving rise to a C(sp²)-C(sp) bond. The yield of arylphenylacetylene in the presence of 0.1 mol.% of Pd catalyst in relation to the starting halide was 50–90% depending on the nature of the aryl halide.     

Comparison study of adsorption of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions from dimethyl formamide on In-Ga and Tl-Ga electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions on the renewable liquid In-Ga and Tl-Ga electrodes from 0.1 M solutions in dimethyl formamide (DMF) is investigated by using the method of differential capacitance measurements. The results are compared with similar data obtained on Hg and Ga electrodes in DMF and with the corresponding data obtained in acetonitrile (AN). It is shown that, in DMF, the adsorption parameters and the series of surface activity of halide ions (Hal⁻) significantly depend on the metal nature. In contrast to Hg electrode, on which the surface activity of halide ions increases in the series: Cl⁻ < Br⁻ < I⁻, on In-Ga, as well as on the Ga electrode, it varies in the reverse order: I⁻ < Br⁻ < Cl⁻, whereas on the Tl-Ga electrode, partially reversed series of surface activity is observed: Br⁻ < I⁻ < Cl⁻. The results are explained within the framework of Andersen-Bockris model. An analysis of experimental results leads to the following qualitative conclusions: (1) on the In-Ga and Tl-Ga electrodes, as well as on Ga electrode, free energy of metal-Hal⁻ interaction ( $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) increases in series I⁻ < Br⁻ < Cl⁻; (2) for Cl⁻, Br⁻, and I⁻, $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) grows in series Tl-Ga < In-Ga < Ga; (3) an absolute magnitude of $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } (Hal₁⁻, and Hal₂⁻ are any ions of Cl⁻, Br⁻, and I⁻) increases in series Hg < Tl-Ga < In-Ga < Ga; (4) the metal-DMF chemisorption interaction is much stronger than the metal-AN interaction and increases in series Tl-Ga < In-Ga < Ga.     

Multiphotochromic Systems Based on Hybrid Organic–Inorganic Nanoparticles as “Super-Photochromes” for Photonic Molecular Logic Gates

High Energy Chemistry - When photochromes function as a photonic molecular logic gate (MLG), the problem of uncertainty of the final state of the gate arises at the level of a single molecule,...     

Syntheses,Crystal Structure,Theoretical Calculation and Photophysical Properties of one Inorganic–Organic Hybrid Frameworks Based on Mixed Ligands

Journal of Cluster Science - One novel Inorganic–Organic Hybrid compound [Pb(mip)(bidc)]n (1) [mip?=?2-(3-methoxyphenyl)-1H-imidazo[4,5-f][1,10]phenanthroline,...     

Polyoxometalates–Directed Assembly of Inorganic–Organic Hybrid Compounds with Copper Multinuclear Nano-cluster Based on Flexible Double Tetrazole-based Thioether

Two new inorganic–organic hybrid compounds constructed from different polyoxometalates (POMs) and copper multinuclear clusters, [Cu(bmte)(H₂Mo₈O₂₆)_0.5]·3H₂O (1) and [Cu₃(bmte)₃(HSiMo₁₂O₄₀)]·H₂O (2) (bmte = 1,2-bis(1-methyl-5-mercapto-1,2,3,4-tetrazole)ethane), have been synthesized under hydrothermal conditions with a flexible double tetrazole-based thioether and characterized by IR, TG and single-crystal X-ray diffraction analyses. In compound 1, two bmte ligands chelate two Cu^I ions with three N atoms to form a binuclear nano-scale subunit [Cu₂(bmte)₂]²⁺, then the binuclear Cu^I subunits are connected by [Mo₈O₂₆]⁴⁻ anions to build a one dimensional (1D) chain. In compound 2, a trinuclear nano-scale subunit [Cu₃(bmte)₃]³⁺ constructed from three Cu^I ions and three bmte ligands has been obtained, and the adjacent trinuclear subunits are linked by [SiMo₁₂O₄₀]⁴⁻ anions to form a “zipper” 1D chain. The adjacent chains of the title compounds are ultimately extended into 2D layers by hydrogen bonds between bmte and POMs. The structural difference of the two compounds indicates that the POMs play an important structure-directed role on the final networks. In addition, the electrochemical behavior of 2-modified carbon paste electrode (2-CPE) and its electrocatalytic reduction of nitrite have been discussed.     

Hydrothermal Synthesis and Structural Characterization of Two Organic–Inorganic Hybrids Based on Sandwich-type Polyoxometalates

Abstract  Two novel inorganic–organic hybrid sandwich-type phosphotungstates [H₂en][Ni(en)₂]₂[{(α-B-PW₉O₃₄)₂Ni₄(H₂O)₂}{Ni(en)₂(H₂O)}₂] · 5H₂O (1) and [Ni(en)₂][Ni(en)₂(H₂O)₂][{(α-B-PW₉O₃₄)₂Ni₄(Hen)₂}{Ni(en)₂(H₂O)}₂] · 10H₂O (2) (en = ethylenediamine) have been synthesized by the hydrothermal reactions of trivacant precursors Na₉[α-A-PW₉O₃₄] · 7H₂O/Na₁₂[α-P₂W₁₅O₅₆] · 18H₂O with NiCl₂ · 6H₂O in the presence of en and structurally characterized by IR spectra, elemental analyses and thermogravimetric analyses. X-ray crystallographic analyses indicate that 1 is made up of inorganic polyoxoanions [Ni₄(H₂O)₂(α-B-PW₉O₃₄)₂]^10– decorated by nickel-organoamine groups, while 2 is constructed from inorganic–organic hybrid polyoxoanions [(α-B-PW₉O₃₄)₂Ni₄(Hen)₂]^8– decorated by nickel-organoamine groups. Graphical Abstract   Hydrothermal Synthesis and Structural Characterization of Two Organic–Inorganic Hybrids based on Sandwich-type Polyoxometalates Bing Li, Zhao Dan, Shou-Tian Zheng, Guo-Yu Yang      

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

Comparative study of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions adsorption from dimethyl formamide at Hg- and Ga-electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions from their 0.1 M solutions in dimethyl formamide at renewable liquid Hg- and Ga-electrodes was studied under similar experimental conditions by the differential-capacitance and jet-electrode methods. The data obtained points out to a strong effect of the metal nature on adsorption parameters and the halogenide-ion surface activity series. The halogenide-ion surface activity at the Hg-electrode increased in the following sequence: Cl⁻ < Br⁻ < I⁻; at the Ga-electrode, in the reverse sequence: I⁻ < Br⁻ < Cl⁻. The results are explained qualitatively in terms of the Andersen-Bockris model. It follows from the obtained data that (1) the free energy of the metal-halogenide-ion interaction increases in the following sequence: I⁻ < Br⁻ < Cl⁻; (2) the free energy of the Ga-halogenide-ion interaction exceeds that of the Hg⁻halogenide-ion interaction; and (3) the difference of the Cl⁻, Br⁻, and I⁻ ions interaction with the metals increased significantly when passing from Hg⁻ to Ga-electrode.