碳纳米管内P—Ylide反应的理论研究

碳纳米管空腔不仅可以改变填充到其内部分子的性质,而且对其内部的SN2取代反应有促进或抑制作用,因而被视为一种新型的“固体溶剂”．本文通过密度泛函理论研究了CH2O和PH3CH2在气相、苯溶液和碳纳米管空腔内的[2＋2]加成反应．结果表明,与气相相比,碳纳米管空腔对于[2＋2]环加成反应影响不大,这是因为所研究的[2＋2]环加成反应中,反应物并不是轴对称的,不同于SN2取代反应的一维线性排列,所以具有较大轴向极化率的碳纳米管对[2＋2]环加成反应影响较小．     

Accessing substituted pyrrolidines via formal [3+2] cycloaddition of 1,3,5-triazinanes and donor-acceptor cyclopropanes

The formal [3+2] cycloaddition of 1,3,5-triaryl-1,3,5-triazinanes with donor-acceptor cyclopropanes has been found to provide pyrrolidines in good to excellent yields under mild reaction conditions. Preliminary mechanistic investigation indicates that this formal [3+2] cycloaddition reaction proceeds through competing S_N1 and S_N2 pathways.     

Lewis acid mediated SN2-type nucleophilic ring opening followed by [4+2] cycloaddition of N-tosylazetidines with aldehydes and ketones: synthesis of chiral 1,3-oxazinanes and 1,3-amino alcohols

A highly efficient strategy for Cu(OTf)₂ mediated S_N2-type nucleophilic ring opening followed by [4+2] cycloaddition reactions of enantiopure 2-phenyl-N-tosylazetidines with various aldehydes and ketones afforded a variety of substituted 1,3-oxazinanes and 1,3-amino alcohols in excellent yields, excellent de and good to excellent ee. The proposed S_N2-type mechanism of the cycloaddition reaction is supported by experimental evidence.     

Energy transfer or electron transfer?—DFT study on the mechanism of [2+2] cycloadditions induced by visible light photocatalysts

The intramolecular [2+2] cycloaddition of 1,3-dienes under visible light irradiation investigated by Yoon and his co-workers shows remarkably high yield and stereoselective differences under different photocatalysts. The reaction was speculated to be induced by energy transfer. However, the origin for these phenomena is still unclear. In this scene, the detailed mechanism for the [2+2] cycloaddition of 1,3-dienes under visible light has been investigated using density functional theory B3LYP and TPSSTPSS methods. The result shows that the reaction not only can be induced by energy transfer between photocatalysts and reactants, but also can be induced by electron transfer between them. The [2+2] cycloaddition induced by energy transfer is carried out along the potential energy surface (PES) of triplet excited states (T₁) firstly, and then goes back to the singlet ground state (S₀) via MECPs (minimum energy crossing points) between the PESs of the S₀ and T₁ states, forming the product in the S₀ state. The [2+2] reaction induced by electron transfer proceeds along the doublet state PES of the cation radical reactant and the neutral four-membered ring product could be obtained by electron transfer from the corresponding reactant or reduced photocatalyst. The origin of stereoselectivity of the [2+2] reaction is attributed to the reaction mechanism difference under different photocatalysts.     

Pseudo-bimolecular [2+2] cycloaddition studied by time-resolved photoelectron spectroscopy

The first study of pseudo‐bimolecular cycloaddition reaction dynamics in the gas phase is presented. We used femtosecond time‐resolved photoelectron spectroscopy (TRPES) to study the [2+2] photocycloaddition in the model system pseudo‐gem‐divinyl[2.2]paracyclophane. From X‐ray crystal diffraction measurements we found that the ground‐state molecule can exist in two conformers; a reactive one in which the vinyl groups are immediately situated for [2+2] cycloaddition and a nonreactive conformer in which they point in opposite directions. From the measured S₁ lifetimes we assigned a clear relation between the conformation and the excited‐state reactivity; the reactive conformer has a lifetime of 13 ps, populating the ground state through a conical intersection leading to [2+2] cycloaddition, whereas the nonreactive conformer has a lifetime of 400 ps. Ab initio calculations were performed to locate the relevant conical intersection (CI) and calculate an excited‐state [2+2] cycloaddition reaction path. The interpretation of the results is supported by experimental results on the similar but nonreactive pseudo‐para‐divinyl[2.2]paracyclophane, which has a lifetime of more than 500 ps in the S₁ state.     

Synthesis and Reactivity of a Zinc Diazoalkyl Complex: [3+2] Cycloaddition Reaction with Carbon Monoxide

This work reports the synthesis, characterization, and reactivity of the first example of a well-defined zinc α-diazoalkyl complex. Treatment of zinc(I)-zinc(I) bonded compound L ₂Zn₂ [ L =CH₃C(2,6-ⁱPr₂C₆H₃N)CHC(CH₃)(NCH₂CH₂PPh₂)] or zinc(II) hydride L ZnH with trimethylsilyldiazomethane affords zinc diazoalkyl complex L ZnC(N₂)SiMe₃. This complex liberates N₂ in the presence of a nickel catalyst to form an α-zincated phosphorus ylide by reacting with the pendant phosphine. It selectively undergoes formal [3+2] cycloaddition with CO₂ or CO to form the corresponding product with a five-membered heterocyclic core. Notably, the use of CO in such a [3+2] cycloaddition reaction is unprecedented, reflecting a novel CO reaction mode.     

Stereoselective Rhodium‐Catalysed [2+2+2] Cycloaddition of Linear Allene–Ene/Yne–Allene Substrates: Reactivity and Theoretical Mechanistic Studies

Allene–ene–allene ( 2 and 5 ) and allene–yne–allene ( 3 and 7 ) N‐tosyl and O‐linked substrates were satisfactorily synthesised. The [2+2+2] cycloaddition reaction catalysed by the Wilkinson catalyst [RhCl(PPh₃)₃] was evaluated. Substrates 2 and 5 , which bear a double bond in the central position, gave a tricyclic structure in a reaction in which four contiguous stereogenic centres were formed as a single diastereomer. The reaction of substrates 3 and 7 , which bear a triple bond in the central position, gave a tricyclic structure with a cyclohexenic ring core, again in a diastereoselective manner. All cycloadducts were formed by a regioselective reaction of the inner allene double bond and, therefore, feature an exocyclic diene motif. A Diels–Alder reaction on N‐tosyl linked cycloadducts 8 and 10 allowed pentacyclic scaffolds to be diastereoselectively constructed. The reactivity of the allenes on [2+2+2] cycloaddition reactions was studied for the first time by density functional theory calculations. This mechanistic study rationalizes the order in which the unsaturations take part in the catalytic cycle, the reactivity of the two double bonds of the allene towards the [2+2+2] cycloaddition reaction, and the diastereoselectivity of the reaction.     

An efficient synthetic route to substituted tetrahydropyrimidines by Cu(OTf)2-mediated nucleophilic ring-opening followed by the [4+2] cycloaddition of N-tosylazetidines with nitriles

A highly efficient strategy for Cu(OTf)₂-mediated S_N2 type nucleophilic ring-opening followed by the [4+2] cycloaddition reactions of a number of 2-aryl-N-tosylazetidines with nitriles to afford a variety of substituted tetrahydropyrimidines in excellent yields is reported. The resulting tetrahydropyrimidines could easily be transformed into synthetically important 1,3-diamines by acid-catalyzed hydrolysis. The strategy has been extended to the synthesis of enantiomerically pure tetrahydropyrimidines from enantiopure disubstituted azetidines. The reaction proceeds through an S_N2 type mechanism as proposed by us earlier.     

Theoretical investigation of ion pair SN2 reactions of alkali isothiocyanates with alkyl halides. Part 1. Reaction of lithium isothiocyanate and methyl fluoride with inversion mechanism

The gas‐phase ionic S_N2 reactions NCS^‐ + CH₃F and ion pair S_N2 reaction LiNCS + CH₃F with inversion mechanism were investigated at the level of MP2(full)/6‐311+G**//HF/6‐311+G**. Both of them involve the reactants complex, inversion transition state, and products complex. There are two possible reaction pathways in the ionic S_N2 reaction but four reaction pathways in the ion pair S_N2 reaction. Our results indicate that the introduction of lithium significantly lower the reaction barrier and make the ion pair displacement reaction more facile. For both ionic and ion pair reaction, methyl thiocyanate is predicted to be the major product, but the latter is more selective. More‐stable methyl isothiocyanate can be prepared by thermal rearrangement of methyl thiocyanate. The theoretical predictions are consistent with the known experimental results. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Ammonium adduct ion in ammonia chemical ionization mass spectrometry: 2—Mechanism of elimination of neutrals from the ammonium adduct ion

The mechanism of elimination of ROH (R = H or CH₃) from the ammonium adduct ion, [M+NH₄]⁺, of 1-adamantanol and its methyl ether is examined by using linked-scan metastable ion spectra and by measuring the dependence of the peak intensity ratio [M+NH₄]⁺/[M+NH₄? ROH]⁺ on ammonia pressure. For 1-adamantanol both S_Ni and S_N1 reactions are suggested in metastable ion decomposition, while only the S_N1 mechanism is operative in the ion source. For 1-adamantanol methyl ether the S_N1 reaction predominates both in metastable ion decomposition and in the ion source reaction.     

Efficient three-component reactions of α-thiocyanato ketones stereoselectively forming E-3-aroylidene-2-oxindole derivatives

A new three-component reaction of α-thiocyanato ketones under microwave irradiation for the stereoselective synthesis of 25 examples of E-3-aroylidene-2-oxindole derivatives has been described. The domino reaction simultaneously installs C–S and C–C bonds through continuous [3+2] cycloaddition/ring opening of in situ generated 1,3-oxathiolanes/S_N2-type reaction sequence.     

Selenophen‐2‐yl‐Substituted Thiocarbonyl Ylides – at the Borderline of Dipolar and Biradical Reactivity

The reactions of aryl (selenophen‐2‐yl) thioketones with CH₂N₂ occur with spontaneous elimination of N₂, even at low temperature (?65°), to give regioselectively sterically crowded 4,4,5,5‐tetrasubstituted 1,3‐dithiolanes and/or a novel type of twelve‐membered dithia‐diselena heterocycles as dimers of the transient thiocarbonyl S‐methanides. The ratio of these products depends on the type of substituent located at C(4) of the phenyl ring. Whereas the formation of the 1,3‐dithiolanes corresponds to a [3+2] cycloaddition of an intermediate thiocarbonyl ylide with the starting thioketone, the twelve‐memberd ring has to be formed via dimerization of the ‘thiocarbonyl ylide’ with an extended biradical structure.     

Theoretical studies of spin state‐specific [2 + 2] and [5 + 2] photocycloaddition reactions of n‐(1‐penten‐5‐yl)maleimide

N‐alkenyl maleimides are found to exhibit spin state‐specific chemoselectivities for [2 + 2] and [5 + 2] photocycloadditions; but, reaction mechanism is still unclear. In this work, we have used high‐level electronic structure methods (DFT, CASSCF, and CASPT2) to explore [2 + 2] and [5 + 2] photocycloaddition reaction paths of an N‐alkenyl maleimide in the S₁ and T₁ states as well as relevant photophysical processes. It is found that in the S₁ state [5 + 2] photocycloaddition reaction is barrierless and thus overwhelmingly dominant; [2 + 2] photocycloaddition reaction is unimportant because of its large barrier. On the contrary, in the T₁ state [2 + 2] photocycloaddition reaction is much more favorable than [5 + 2] photocyclo‐addition reaction. Mechanistically, both S₁ [5 + 2] and T₁ [2 + 2] photocycloaddition reactions occur in a stepwise, nonadiabatic means. In the S₁ [5 + 2] reaction, the secondary C atom of the ethenyl moiety first attacks the N atom of the maleimide moiety forming an S₁ intermediate, which then decays to the S₀ state as a result of an S₁ → S₀ internal conversion. In the T₁ [2 + 2] reaction, the terminal C atom of the ethenyl moiety first attacks the C atom of the maleimide moiety, followed by a T₁ → S₀ intersystem crossing process to the S₀ state. In the S₀ state, the second C C bond is formed. Our present computational results not only rationalize available experiments but also provide new mechanistic insights. © 2017 Wiley Periodicals, Inc.     

First Synthesis of 2-Vinylindole and its diels-Alder Reactions with CC-Dienophiles

By means of an intramolecular Wittig process, 2-vinylindole ( 2 ) was prepared. The indole 2 functions as a heterocyclic, donor-activated 1,3-diene and undergoes [4+2] cycloaddition reactions with dimethyl acetylenedicarboxylate, N-phenylmaleimide, and p-benzoquinone leading to the novel carbazole dervatives 3 , 4 , 5c , 6 and 7 respectively. The reaction of 2 with acceptor (A)-Substituted dienophiles (e.g.) ACH?CH₂, AC≡(CH) does not yield products that can be isolated.     

Organic reactions at surfaces: A study of carnitine by secondary ion mass spectrometry

Carnitine inner salt, (CH₃)₃N⁺ CH₂CH(OH)CH₂COO^?, and carnitine hydrochloride, (CH₃)₃N⁺CH₂CH (OH)CH₂COOH Cl^?, in the solid state undergo ion-beam-induced intermolecular methyl transfer reactions as shown by (CH₃)₃N⁺ CH₂CH(OH)CH₂COOCH₃ ions at m/z 176 in their positive ion spectra. In the case of carnitine HCl, the product ion is three times as abundant as the intact cation. For the inner salt however, the product is less than one-tenth as abundant as [M + H] ⁺. In both cases, the reaction can be precluded by dissolution of the sample, supporting an intermolecular mechanism. The negative ion spectra for these compounds contain no [M ? CH₃]^? ions, suggesting that simple transmethylation does not occur. Rather it is proposed that the inner salt abstracts a methyl group from the intact carnitine cation to yield [M + CH₃]⁺ and a neutral species, the driving force being a minimization of the total number of charges desorbed into the gas phase. Thermodynamic data favor this mechanism as do data for other carnitine salts. The reaction appears to be inhibited when one reactant is present in excess. This is the case for carnitine HNO₃ and CH₃SO₃H, which tend to liberate the intact cation since the anions are large and polarizable. It is also the case for small, hard anions like fluoride, which appear to favor release of the inner salt, hence the cation at m/z 162 is of low abundance and the transmethylation product (m/z 176) is absent. The extent of the reaction is also dependent on the methods of preparation of the sample, and deposition of the salts from solution greatly reduces the extent of methyl transfer. [M ? CH₃]^? is observed when glycerol is used as a matrix, possibly due to a matrix-analyte methyl transfer reaction.     

A Cu(I)-promoted one-pot ‘SNAr-click reaction’ of fluoronitrobenzenes

A one-pot two-step sequence involving a nucleophilic aromatic substitution (S_NAr) of activated fluorobenzenes with azide nucleophile and in situ Huisgen cycloaddition of the resulting aryl azides with alkynes has been developed for a rapid access to 1,4-substituted triazoles. Control experiments revealed that both the steps are catalyzed by Cu(I) and also the course of reaction as S_NAr followed by [3+2]-cycloaddition.     

Studies in the furan series. 23. Preparation of some new 5-substituted furfurylallylarylamines. Influence of substituents on the intramolecular Diels-Alder (IMDA) reaction

Several new N-allyl-N-(5-substituted)-2-furfuryl-p)-toluidines IIIa-e with Cl, Br, I, NO₂ or CH₃O groups in position 5 of the furan nucleus were prepared by allylation of the corresponding secondary furfurylaryl-amines. Both, electron withdrawing and releasing substituents enhanced the yield of intramolecular [4+2] cycloaddition.     

A Carbon Nanotube Layered Electrode for the Construction of the Wired Bilirubin Oxidase Oxygen Cathode

Oxidatively treated carbon nanotubes were coated on a glassy carbon surface to form a CNT‐layer. On the CNT‐layered GC surface, a redox hydrogel film of the copolymer, of polyacryamide and poly(N‐vinylimidazole) complexed with [Os(4,4′‐dichloro‐2,2′‐bipyridine)₂Cl]^+/2+ wiring bilirubin oxidase was immobilized. A good contact was achieved between the hydrogel film and the hydrophilic CNT‐layer with carboxylated CNTs. The prepared bilirubin oxidase cathode on the CNT‐layer was employed for the electrocatalytic reduction of O₂, and enhanced current and stability were observed. Electron transfers from the electrode surface O₂ molecules were analyzed. The optimal composition of the enzyme, redox polymer, and cross‐linker in the catalyst and the thickness of the CNT‐layer were determined.     

Reaction of Ketenealkylsilylacetals with Acrylonitrile and 2-chloroacrylonitrile

The Lewis acid catalyzed reaction of ketenealkylsilylacetals with acrylonitrile and 2-chloroacrylonitrile can take place via two pathways : a [2+2] cycloaddition in CCl₄-ZnBr₂ and a Michaël-type addition in CH₂Cl₂-ZnI₂.     

A density functional theory study of the stereoselectivity of Cu(OTf)2-catalyzed [3+2] cycloaddition of trifluoromethylated N-acylhydrazones and isoprene: A concerted asynchronous mechanism

Here we employ density functional theory calculations to systematically investigate the underlying mechanism of Cu(OTf)₂-catalyzed [3+2] cycloaddition reactions in the synthesis of CF₃-substituted pyrazolidines. About eight possible initial configurations of the [3+2] reaction is considered, and all relevant reactants, transition states, and products are optimized. Based on these structures, internal reaction coordinate paths, and wavefunction analysis results, we conclude that the Cu(OTf)₂-catalyzed [3+2] cycloaddition follows a concerted asynchronous mechanism. The C N bond forms immediately after the formation of the C C bond. Among the eight reaction paths, the energy barrier for the [3+2] reaction that leads to the CF₃-substituted syn-pyrazolidine is the lowest, ∼5.4 kcal/mol, which might result in the diastereoselectivity that is observed in the experiment. This work not only gives the detailed mechanism of the Cu(OTf)₂-catalyzed [3+2] cycloaddition but can also be helpful for the future designation of Cu(OTf)₂-based cycloaddition processes.