Interpretation of colloidal dyeing of polyester fabrics pretreated with ethyl xanthogenate in terms of zeta potential and surface free energy balance

Data are presented on the adsorption of the colloidal dye Disperse Blue 3 onto polyester fabric (Dacron 54, Stile 777), the fabric being pretreated with different amounts of the surfactant potassium ethyl xanthogenate (PEX). This study has been made by means of both the evolution of the zeta potential of the fiber/dye interface and the behaviour of the surface free energy components of the above systems. The kinetics of adsorption of the process of dyeing, using 10(-4) M of PEX in the pretreatment of the fabric, shows that increasing temperature of adsorption decrease the amount of colloidal dye adsorbed onto the fabric. This fact shows that the principal mechanism involved in this adsorption process is physical in nature. The adsorption isotherms of the colloidal dye onto polyester pretreated with different amounts of PEX, shows that the adsorption of the dye is favored with the increase in the concentration of the surfactant used in the pretreatment. This fact shows that the pretreatment with PEX is a very interesting aspect of interest in textile industry. The zeta potential of the system fabric/surfactant shows that this parameter is negative (about -25 mV) for the untreated fiber and decreases in absolute value for increasing concentration of the surfactant on the fiber, the value of the zeta potential of the system being -5 mV for 10(-2) M of PEX. This behavior can be explained for the chemical reaction nucleophilic attack between the carboxyl groups of polyester, ionized at pH 8, and the thiocarbonyl group of the xanthogenate ion. On the other hand, the zeta potential of the system polyester pretreated with PEX/Disperse Blue 3 at increasing concentrations of the surfactant and the dye shows that this parameter increases its negative value strongly with increasing concentration of the surfactant used in the treatment. This can be explained for the hydrogen bonds between the hydroxy groups of the dye and the S- ions of the thiocarbonyl group of the surfactant preadsorbed onto the fiber.     

Electrokinetic and Thermodynamic Analysis of the Dyeing Process of Polyamide Fabric with Mordant Black 17

An electrokinetic and thermodynamic analysis of the dyeing process of polyamide 6.6 (nylon 6.6) by the dye Palatine chrome black (PCB) is described in the present work. The electrokinetic study was performed by means of electrophoretic mobility measurements on bare and dyed fiber. The most significant result is the increase in electrokinetic potential, zeta, toward more negative values as the dye concentration in the dispersion medium is raised. Given the molecular structure of PCB, which contains a sulfonate group per molecule, it is feasible that such increase in |zeta| is due to the adsorption of the negatively charged, dissociated dye entities. The uptake of PCB by the fiber is experimentally determined at two temperatures: the strong increase in the amount of dye incorporated into the fiber as the initial concentration of PCB is larger, and also the fact that higher temperatures favor the dyeing process is an indication of the existence of strong interactions between both interfaces. From a different point of view, the efficient coverage of Nylon by PCB is also demonstrated by the changes experienced by the surface free energy of Nylon upon treatment with PCB. Copyright 2001 Academic Press.     

Dispersion stability of a ceramic glaze achieved through ionic surfactant adsorption

The adsorption of cetylpyridinium chloride (CPC) and sodium dodecylbenzenesulfonate (SDBS) onto a ceramic glaze mixture composed of limestone, feldspar, quartz, and kaolin has been investigated. Both adsorption isotherms and the average particle zeta potential have been studied in order to understand the suspension stability as a function of pH, ionic strength, and surfactant concentration. The adsorption of small amounts of cationic CPC onto the primarily negatively charged surfaces of the particles at pH 7 and 9 results in strong attraction and flocculation due to hydrophobic interactions. At higher surfactant concentrations a zeta potential of more than +60 mV results from the bilayered adsorbed surfactant, providing stability at salt concentrations < or = 0.01 M. At 0.1 M salt poor stability results despite substantial zeta potential values. Three mechanisms for SDBS adsorption have been identified. When anionic SDBS monomers either adsorb by electrostatic interactions with the few positive surface sites at high pH or adsorb onto like charged negative surface sites due to dispersion or hydrophobic interactions, the magnitude of the negative zeta potential increases slightly. At pH 9 this increase is enough to promote stability with an average zeta potential of more than -55 mV, whereas at pH 7 the zeta potential is lower at about -45 mV. The stability of suspensions at pH 7 is additionally due to steric repulsion caused by the adsorption of thick layers of neutrally charged Ca(DBS)2 complexes created when the surfactant interacts with dissolved calcium ions from the calcium carbonate component.     

Effect of polyethyleneimine ion on the sorption of a reactive dye onto Leacril fabric: electrokinetic properties and surface free energy of the system

Data are presented on the kinetics, electrokinetics, and surface free energy in the process of adsorption of polyethyleneimine (PEI) as a pretreatment of Leacril, later dyed with the reactive dye Remazol Brilliant Blue R (RBBR). The electrokinetic potential of Leacril is negative, due probably to the presence of sulfonate and sulfate end-group onto Leacril fibers. The zeta potential of Leacril decreases in absolute value as a function of NaCl concentration in solution, probably because of compression of the electrical double layer. The zeta potential of Leacril as a function of the concentration of PEI in solution increases because of the adsorption of PEI ions through chemical reaction between the sulfonate end-groups of Leacril and the amine groups of PEI. The adsorption kinetics shows that an increase in the concentration of PEI, brings about an increase in the amount of RBBR adsorbed onto the fiber. This may be an indication of the chemical reaction between the reactive groups of the polyelectrolyte and dye molecules. The behavior of the surface free energy of the systems involved confirms these conclusions.     

Investigation of the electrokinetic properties of paraffin suspension. 2. In cationic and anionic surfactant solutions

Electrical phenomena at nonionogenic hydrophobic surfaces (solid or liquid) in water, electrolyte, and/or surfactant solutions still attract research. In part 1 of this paper we described the electrokinetic behavior of paraffin wax suspension in water and electrolyte solutions (NaCl or LaCl3). On the basis of the latest data of water structure near hydrophobic surfaces it was concluded that immobilized water dipoles at the interface can play an essential role in the zeta potential formation. In this paper were investigated the zeta potentials of paraffin wax in cationic surfactants cetyltrimethylammonium bromide, C16H33(CH3)3NBr, and octadecyltrimethylammonium chloride, C18H37(CH3)3NCl, and anionic surfactant sodium dodecyl sulfate, C12H25SO4Na. Also changes in wettability of the paraffin surface due to the surfactant's adsorption were studied via wetting contact angle measurements and calculation of the surface free energy. It was concluded that at a low surfactant concentration (10(-6) M) the water dipole structure still contributes to the zeta potential, but at a higher one the zeta potential is determined by the surfactant molecules' adsorption. A special role of OH- ions is also clearly seen. Moreover, a functional relationship was found between the surface free energy of the surfactant-covered paraffin surface and the zeta potential.     

The effect of adsorbed carboxymethyl cellulose on the cotton fibre adsorption capacity for surfactant

The research reported in this paper demonstrates that the capacity of cotton fibres to adsorb cationic surfactants as well as the rate of the adsorption process can be increased by adsorbing carboxymethyl cellulose (CMC) onto the fibre surfaces; in addition, the adsorption can be restricted to the fibre surface. CMC was deposited by means of adsorption from an aqueous solution. The adsorption of N-cetylpyridinium chloride (CPC) from an aqueous solution onto the CMC-modified fibres was measured using UV-spectrometric determination of the surfactant concentration in the solution. Adsorption onto the cotton fibres was studied in a weakly basic environment (pH 8.5) where cotton fibres are negatively charged and the CPC ion is positively charged. Modification of the fibres by adsorption of CMC introduces new carboxyl groups onto the fibre surfaces, thereby increasing the adsorption capacity of the fibres for CPC. The initial rate of adsorption of CPC increased proportionally with the amount of charge; however, this rate slowed down at high degrees of coverage on fibres with a high charge. The adsorption of cationic surfactant to the anionic surface groups was stoichiometric, with no indication of multilayer or admicelle formation. It was evident that the acidic group content of the fibres was the primary factor determining cationic surfactant adsorption to these fibres.     

Adsorption of different amphiphilic molecules onto polystyrene latices

In order to know the influence of the surface characteristics and the chain properties on the adsorption of amphiphilic molecules onto polystyrene latex, a set of experiments to study the adsorption of ionic surfactants, nonionic surfactants and an amphiphilic synthetic peptide on different latex dispersions was performed. The adsorbed amount versus the equilibrium surfactant concentration was determined. The main adsorption mechanism was the hydrophobic attraction between the nonpolar tail of the molecule and the hydrophobic regions of the latex surface. This attraction overcame the electrostatic repulsion between chains and latex surface with identical charge sign. However, the electrostatic interactions chain-surface and chain-chain also played a role. General patterns for the adsorption of ionic chains on charged latex surfaces could be established. Regarding the shape, the isotherms presented different plateaus corresponding to electrostatic effects and conformational changes. The surfactant size also affects the adsorption results: the higher the hydrophilic moiety in the surfactant molecule the lower the adsorbed amount.     

Characterization of chitosan nanofiber fabric by electrospray deposition: electrokinetic and adsorption behavior

Cationic biopolymer nanofiber fabrics were prepared from a chitosan/poly(ethylene oxide) blend solution by electrospray deposition. Their electrokinetic properties and DNA adsorption behavior were analyzed as a function of pH. The zeta potential was determined from streaming potential/streaming current measurements. The adsorption of DNA onto the fabrics was investigated by spectrophotoscopy. The adsorption behavior of DNA correlated well with the electrokinetic properties of the fabrics. This revealed that the electrokinetic approach was a useful option for characterization of novel nanofiber assemblies made by the electrostatic spray process. In addition, these results provided fundamental information about chitosan nanofiber fabrics for both biomedical and analytical applications.     

Investigation of the effects of wall adsorption of the visualization agent on baseline noise characteristics for indirect UV detection in capillary electrophoresis

New insights into the effects of the wall adsorption of the visualization agent on baseline noise characteristics in indirect UV detection in capillary electrophoresis were provided. When compared to relatively small, hydrophilic cationic (1-(4-pyridyl)pyridinium chloride hydrochloride) or anionic chromophores (bromide and benzoate), the use of a UV-absorbing long-chain cationic surfactant (benzyldimethylhexadecylammonium chloride) as a probe (visualization agent) for studying baseline noise characteristics as a function of various experimental conditions, such as applied voltage, pH or buffer composition, was found to provide noise data that were very different under certain conditions. For cationic visualization agents that have a strong tendency of adsorbing onto the capillary surfaces due to electrostatic and/or hydrophobic interactions, it appeared that the interplay of both thermal as well as adsorption/desorption events occurring within the capillary is likely responsible for a fluctuation of the visualization agent concentration at the detector.     

The adsorption of alkylpyridinium chlorides and their effect on the interfacial behavior of quartz

This research was directed at understanding cationic surfactant adsorption phenomena on wet-ground natural quartz, mainly with dodecylpyridinium chloride as the model surfactant. How these surfactant ions adsorb at the interface was delineated through measurements of adsorption isotherms, zeta potentials, suspension stability, contact angles, induction times, and flotation response. Hydrocarbon chain association of adsorbed surfactant ions (or self-association) leads to four distinct adsorption regions as the concentration of surfactant is increased in solution. The same four regions manifest themselves in the behavior of all of the interfacial processes studied. At low concentrations, adsorption is controlled primarily by electrostatic interactions, but when the adsorbed surfactant ions begin to associate into hemimicelles at the surface, hydrophobic chain interactions control the adsorption process. The results of experiments with alkylpyridinium chlorides of 12, 14 and 16 carbon atoms can be normalized in terms of their CMCs, which clearly show that surface aggregation phenomena are driven by the same hydrophobic interactions that lead to micelle formation in bulk solution.     

表面活性剂对污泥脱水性能影响的机理研究:Gemini表面活性剂与聚电解质相互作用的分子动力学模拟

表面活性剂可以与污泥表面的胞外聚合物(EPS)吸附形成胶束,释放出自由水和结合水,从而达到改善污泥脱水性能的目的.本文采用粗粒化的分子动力学模拟方法,研究了Gemini表面活性剂与EPS形成复合物的过程和结构.聚电解质链的亲疏水性对吸附过程有显著影响,亲水聚电解质链与Gemini表面活性剂吸附的主要驱动力为静电吸引,Gemini表面活性剂头基吸附在链上,尾链朝向溶剂;疏水聚电解质链与Gemini表面活性剂吸附过程由静电作用与疏水作用共同促进,Gemini表面活性剂以平行于聚电解质链的构型存在.Gemini表面活性剂联结基团长度对吸附过程的影响甚微;聚电解质链的电荷密度对亲水聚电解质链的吸附产生协同作用,对疏水聚电解质链的吸附不产生作用.     

Proximal adsorption at glass surfaces: ionic strength, pH, chain length effects

The adsorption and desorption of pyridinium chloride surfactants on borosilicate glass are studied as a function of the separation between two glass-solution interfaces. Both the adsorption and desorption change exponentially with the separation; the decay is equal to the solution Debye length. Changes in adsorption are smaller at pH 1.8 (near the point of zero charge of glass) than at pH 6. These results are consistent with an electrostatic cause for the changes in adsorption. The magnitude of the adsorption regulation, however, depends on the length of the alkyl chain and the surface excess of the surfactant. Therefore, proximal adsorption in this system depends on the coupling between the long-range electrostatic forces and the short-range chain-chain interactions. The equation of state for the surfactant on a regulating surface is discussed with respect to changes in intersurface separation.     

Free energy of interaction of sodium dodecyl sulfate in aqueous solution with carbon black surfaces

The free energy of the adsorption process of an ionic surfactant from aqueous solutions onto a set of carbon blacks in the range of low concentrations was evaluated using the model proposed by van Oss and co-workers. The obtained results indicated that the free energy of interaction between adsorbent and adsorbate through water results mainly from Lifshitz-van der Waals and electrostatic interactions, and its value showed a good correspondence with that previously found from a combination of the classical measurements of adsorption isotherms and the Langmuir model.     

Adsorption kinetics investigation for alkyltrimethylammonium bromides on ITO-aqueous interface

The adsorption of dodecyltrimethylammonium bromide and cetyltrimethylammonium bromide onto indium-tin oxide (ITO) was studied by in-situ monitoring the capacitance and resistance of adsorbed layers for a series of concentrations of aqueous solutions. The experimental results suggested that the adsorption of both surfactants showed a three-region adsorption process and that the adsorption was driven by electrostatic attraction and hydrophobic interactions in two regions below critical micelle concentration (cmc). Above the cmc, the changes in electrical properties could be explained by the assumption that entire micelles were directly adsorbed onto the ITO surface and then underwent an adjustment process. The variations of water contact angle against surfactant concentration showed two distinct regions. The effect of high electrolyte concentration on the adsorbed layer structure was also discussed. The text was submitted by the authors in English.     

Electrokinetic Behavior of Fluorite

The electrokinetic behavior of fluorite mineral was studied under various partical sizes and different concentrations of oleic acid at constant pH. The particle size has been reduced with an increase in activation time. The surface energies of milled fluorite minerals were calculated theoretically and experimentally. The zeta potential of the fluorite/water system has shifted to lower side with an increase in particle size. The isoelectric point (iep) of fluorite minerals has been shifted to lower side with increase in oleic acid concentration. This indicates the chemisorbed oleate formation on fluorite. A sharp decrease in zeta potential in the pH range of 6.5–8.4 and the decrease in calculated free energy of adsorption shows the formation of calcium dioleate precipitate on fluorite.     

Synthesis, characterization and comparative evaluation of phenoxy ring containing long chain gemini imidazolium and pyridinium amphiphiles

The effect of Triton X-100 on the colloidal dispersion stability of CuPc-U (unsulfonated and hydrophobic) and CuPc-S (surface sulfonated and hydrophilic) particles in aqueous solutions (water and NaNO(3)) was investigated at 25 °C. Its adsorption density was determined from surfactant concentrations analyzed by an HPLC method with a UV detector. The experimental dispersion stability ratios of the particles were determined from dynamic light scattering (DLS) data, with the Rayleigh-Debye-Gans (RDG) light scattering theory. The adsorption densities of Triton X-100 on both the CuPc-U and CuPc-S increase with increasing concentration of surfactant up to the critical micelle concentration (cmc), and then reach a plateau. The maximum adsorption density Γ(m) is higher for the CuPc-U (d(h)=160 nm) than that for the CuPc-S (d(h)=90 nm). The hydrophobic chains are inferred to be adsorbed onto the surfaces, and the hydrophilic ethylene oxide chains are in a coil conformation. The W(app)-values for the CuPc-U dispersions are affected mainly by the surfactant fractional surface coverage θ. Adding NaNO(3) has no significant effect on the dispersion stability. The stabilization mechanism for the CuPc-U is inferred to be primarily steric, as expected. The stability ratios for the CuPc-S in solutions with NaNO(3) are higher than those for CuPc-U, and decrease with increasing concentration of NaNO(3), indicating that the stabilization is affected by the screening of electrostatic repulsive forces. The zeta potential is not a good predictor of the electrostatic stabilization, pointing to the need for new and improved theories.     

Nanocomposite-based lignocellulosic fibers 3: polyelectrolyte adsorption onto heterogeneous fiber surfaces

Wood and natural fibers are composed of multiple polymeric components. Lignin, one primary component, is typically removed to various degrees during paper-making, but is present on thermomechanically isolated fibers. The effect of the residual lignin on the adsorption of poly(diallyldimethylammonium) chloride (PDDA) onto lignocellulosic fibers was investigated under varying solution conditions (electrolyte concentration and pH). Using nitrogen elemental analysis it was shown for the samples containing the highest concentration of lignin, PDDA adsorption to the fibers was reduced for all solution conditions. Upon extracting the alkali-soluble lignin, the samples showed the greatest amount of PDDA adsorption, achieving ~1.6% (w/w), under neutral solution conditions without the presence of added electrolyte. Furthermore, the influence of polyelectrolyte loading and electrokinetic potential on subsequent multilayer formation of PDDA and montmorillonite clay was quantified. It was revealed that electrokinetic potential of fiber after PDDA adsorption, rather than the amount of adsorbed PDDA layer, controlled the subsequent clay adsorption. Significant mass of PDDA/clay (up to ~75% of starting dry fiber mass for only 4 bi-layers) can be adsorbed onto steam-exploded wood fibers through the multilayer assembly process. This paper provides insight into how non-covalent modification of heterogeneous fibrous substrates offers a novel route for the creation of organic/inorganic fiber materials.     

Foam films stabilized by dodecyl maltoside. 1. Film thickness and free energy of film formation

Foam films stabilized by a sugar-based nonionic surfactant, beta-dodecyl maltoside, are investigated. The film thickness and the film contact angle (which is formed at the transition between the film and the bulk solution) are measured as a function of NaCl concentration, surfactant concentration, and temperature. The film thickness measurements provide information about the balance of the surface forces in the film whereas the contact angle measurements provide information about the specific film interaction free energy. The use of the glass ring cell and the thin film pressure balance methods enables studies under a large variety of conditions. Thick foam films are formed at low electrolyte concentration. The film thickness decreases (respectively the absolute value of the interaction film free energy increases) with the increase of the electrolyte concentration according to the classical DLVO theory. This indicates the existence of a repulsive double layer electrostatic component of the disjoining pressure. An electrostatic double layer potential of 16 mV was calculated from the data. A decrease of the film thickness on increase of the surfactant concentration in the solution is observed. The results are interpreted on the basis of the assumption that the surface double layer potential originates in the adsorption of hydroxyl ions at the film surfaces. These ions are expelled from the surface at higher surfactant concentration.     

Role of surfactants in the sorption of the whitening agent Tinopal CBS onto viscose fibers: a fluorescence spectroscopy study

In the present work, we studied the role of an anionic surfactant, sodium dodecyl sulfate, and a cationic surfactant, dodecyltrimethylammonium chloride, in the sorption of 4,4'-distyrylbiphenyl sodium sulfonate (Tinopal CBS) onto modified cellulose fibers. Fluorescence spectroscopy was used to quantify the amount of sorbed Tinopal CBS on the fiber surface. Differences in the spectral properties and the efficiency of sorption of the whitener/surfactant/fiber system are explained in terms of electrostatic interactions. Our results also show that the sorption efficiency is greater for solutions containing cationic surfactants only below the critical micelle concentration, while anionic surfactants show a smooth influence on the sorption process.     

The effect of pH,chloride ion and background electrolyte concentration on the SERS of acidified pyridine solutions

Surface enhanced Raman spectra of pyridine are reported as a function of pH, halide concentration and background electrolyte concentration. The assignments of pyridinium bands are given in the range 100–4000 cm^?1, and the low frequency band around 235 cm^?1 is discussed. It is found that to obtain a pyridinium spectrum, the presence of halide is necessary. Background electrolyte concentration does not affect the intensity of the pyridine spectrum but greatly affects that of pyridinium. On the basis of the dependence of the intensity of pyridinium on chloride and background electrolyte concentrations, pyridinium is considered not be directly adsorbed on the electrode surface but rather located in the diffuse double layer and associated with specifically adsorbed chloride to form an ion pair.The in-situ measurement of pH and the SERS of pyridine and pyridinium during a pH titration reveal a linear relation between surface pH and bulk pH. Specifically adsorbed chloride causes a decrease in the surface pH. This decrease is explained by a shift of the electrostatic potential at the outer Helmholtz plane caused by specific adsorption of chloride.