Polyion adsorption onto catanionic surfaces. A Monte Carlo study

The adsorption of a single and negatively charged polyion with varying flexibility onto a surface carrying both negative and positive charges representing a charged membrane surface has been investigated by using a simple model employing Monte Carlo simulations. The polyion was represented by a sequence of negatively charged hard spheres connected with harmonic bonds. The charged surface groups were also represented by charged hard spheres, and they were positioned on a hard surface slightly protruding into the solution. The surface charges were either frozen in a liquidlike structure or laterally mobile. With a large excess of positive surface charges, the classical picture of a strongly adsorbed polyion with an extended and flat configuration emerged. However, adsorption also appeared at a net neutral surface or at a weakly negatively charged surface, and at these conditions the adsorption was stronger with a flexible polyion as compared to a semiflexible one, two features not appearing in simpler models containing homogeneously charged surfaces. The presence of charged surface patches (frozen surface charges) and the ability of polarization of the surface charges (mobile surface charges) are the main reasons for the enhanced adsorption. The stronger adsorption with the flexible chain is caused by its greater ability to spatially correlate with the surface charges.     

Ionic liquid self‐assembled monolayer and ion exchange for surface force control

Adhesion and lateral force were controlled by the formation of a self‐assembled monolayer combined with the surface ion exchange of ionic liquids on a silicon surface. In this study, the functionalized imidazolium ionic liquids were designed and synthesized with the aim of controlling surface force. N‐[3‐(Trimethoxylsilyl)propyl] ethylenediamine molecules were first self‐assembled onto a surface as an anchor layer and then 1‐propionic acid‐3‐methylimidazolium chloride were successfully grafted onto the amino‐modified surface. The surface force was changed by surface ion exchange in various anionic solutions. The self‐assembly and ion exchange processes were detected by means of attenuated total reflectance‐Fourier transform infrared spectrometry and further confirmed by X‐ray photoelectron spectra. Adhesion and friction behaviors were systematically investigated by atomic force/friction force microscope. The results indicated that anions played a great role in determining surface properties. Furthermore, surface adhesion and friction can be possibly quantitatively determined by the counter‐anions on the surface. Copyright © 2011 John Wiley & Sons, Ltd.     

立方体纳米Cu2O表面热力学函数的粒度及温度效应

液相还原法合成了4种粒度在40-120 nm的立方体纳米氧化亚铜（Cu₂O）。利用X射线衍射仪（XRD）、显微拉曼光谱仪和场发射扫描电子显微镜（FE-SEM）对纳米Cu₂O的物相组成及形貌结构进行了表征。采用原位微热量技术实时获取纳米/块体Cu₂O与HNO₃反应过程的热动力学信息,结合热化学循环及动力学过渡态理论计算得到纳米Cu₂O的表面热力学函数。在薛永强等建立的无内孔球形纳米颗粒的热力学模型基础上,发展了立方体纳米颗粒的热力学模型。最后由理论结合实验结果分析了粒度和温度对表面热力学函数的影响规律及原因。结果表明,摩尔表面Gibbs自由能、摩尔表面焓和摩尔表面熵均随粒度减小而增大,且与粒度的倒数呈线性关系,这与立方体热力学模型规律一致;随着温度的升高,摩尔表面焓和摩尔表面熵均增大,摩尔表面Gibbs自由能则减小。本文不仅丰富和发展了纳米热力学基本理论,还为纳米材料表面热力学研究及应用提供了方法和思路。     

Fluorescent nanoparticle adhesion assay: a novel method for surface pKa determination of self-assembled monolayers on silicon surfaces

Since the computer industry enables us to generate smaller and smaller structures, silicon surface chemistry is becoming increasingly important for (bio-)analytical and biological applications. For controlling the binding of charged biomacromolecules such as DNA and proteins on modified silicon surfaces, the surface pK(a) is an important factor. Here we present a fluorescent nanoparticle adhesion assay as a novel method to determine the surface pK(a) of silicon surfaces modified with weak acids or bases. This method is based upon electrostatic interactions between the modified silicon surface and fluorescent nanoparticles with an opposite charge. Silicon slides were modified with 3-aminopropyltriethoxysilane (APTES) and were further derivatized with succinic anhydride. Layer thickness of these surfaces was determined by ellipsometry. After incubating the surfaces with an amine-reactive fluorescent dye, fluorescence microscopy revealed that the silicon surfaces were successfully modified with amine- and carboxyl-groups. Two surface pK(a) values were found for APTES surfaces by the fluorescent nanoparticle adhesion assay. The first surface pK(a) (6.55 ± 0.73) was comparable with the surface pK(a) obtained by contact angle titration (7.3 ± 0.8), and the second surface pK(a) (9.94 ± 0.19) was only found by using the fluorescent nanoparticle adhesion assay. The surface pK(a) of the carboxyl-modified surface by the fluorescent nanoparticle adhesion assay (4.37 ± 0.59) did not significantly differ from that found by contact angle titration (5.7 ± 1.4). In conclusion, we have developed a novel method to determine the surface pK(a) of modified silicon surfaces: the fluorescent nanoparticle adhesion assay. This method may provide a useful tool for designing pH-dependent electrostatic protein and particle binding/release and to design surfaces with a pH-dependent surface charge for (bio-)analytical lab-on-a-chip devices or drug delivery purposes.     

Degradation of bare and silanized silicon wafer surfaces by constituents of biological fluids

The surface hydroxyl content and surface structure of silica and other oxides with and without surface modification were systematically studied by solid state (29)Si NMR, thermogravimetric analysis, and the lithium alanate method. Aerosil 90 as a well described reference system and functionalized zirconia-silica particles were used in the validation of the lithium alanate method. 3-Methacryloxypropyltrimethoxysilane and dodecylphosphonic acid were applied as surface modifiers. The determination of silanol content of Aerosil 90 by (29)Si NMR and TGA confirms the results obtained by the lithium alanate method, which also allows for the determination of the remaining surface hydroxyl content after surface modification. For both silane coupling agents, the residual hydroxyl content of modified zirconia-silica is decreased by a factor of approximately 2 compared with that of the unmodified mixed oxide, whereas after modification with dodecylphosphonic acid, the hydroxyl content is slightly higher. These results are again in good agreement with those by (29)Si NMR confirming that the lithium alanate method is a reliable and easily practicable method for surface hydroxyl determination.     

Probing surface charge potentials of clay basal planes and edges by direct force measurements

The dispersion and gelation of clay suspensions have major impact on a number of industries, such as ceramic and composite materials processing, paper making, cement production, and consumer product formulation. To fundamentally understand controlling mechanisms of clay dispersion and gelation, it is necessary to study anisotropic surface charge properties and colloidal interactions of clay particles. In this study, a colloidal probe technique was employed to study the interaction forces between a silica probe and clay basal plane/edge surfaces. A muscovite mica was used as a representative of 2:1 phyllosilicate clay minerals. The muscovite basal plane was prepared by cleavage, while the edge surface was obtained by a microtome cutting technique. Direct force measurements demonstrated the anisotropic surface charge properties of the basal plane and edge surface. For the basal plane, the long-range forces were monotonically repulsive within pH 6-10 and the measured forces were pH-independent, thereby confirming that clay basal planes have permanent surface charge from isomorphic substitution of lattice elements. The measured interaction forces were fitted well with the classical DLVO theory. The surface potentials of muscovite basal plane derived from the measured force profiles were in good agreement with those reported in the literature. In the case of edge surfaces, the measured forces were monotonically repulsive at pH 10, decreasing with pH, and changed to be attractive at pH 5.6, strongly suggesting that the charge on the clay edge surfaces is pH-dependent. The measured force profiles could not be reasonably fitted with the classical DLVO theory, even with very small surface potential values, unless the surface roughness was considered. The surface element integration (SEI) method was used to calculate the DLVO forces to account for the surface roughness. The surface potentials of the muscovite edges were derived by fitting the measured force profiles with the surface element integrated DLVO model. The point of zero charge of the muscovite edge surface was estimated to be pH 7-8.     

Polypropylene film chemical and physical modifications by dielectric barrier discharge plasma treatment at atmospheric pressure

Dielectric barrier discharge (DBD) technologies have been used to treat a polypropylene film. Various parameters such as treatment speed or electrical power were changed in order to determine the treatment power impact at the polypropylene surface. Indeed, all the treatments were performed using ambient air as gas to oxidize the polypropylene surface. This oxidation level and the surface modifications during the ageing were studied by a wetting method and by X-ray photoelectron spectroscopy (XPS). Moreover polypropylene film surface topography was analyzed by atomic force microscopy (AFM) in order to observe the surface roughness modifications. These topographic modifications were correlated to the surface oxidation by measuring with a lateral force microscope (LFM) the surface heterogeneity. The low ageing effects and the surface reorganization are discussed.     

Effect of surface layering time of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface layering time of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier particles were layered with vegetable magnesium stearate by physical mixing. In the present study, drug/carrier powder mixtures were designed consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface layering. These powder mixtures were aerosolized by a Jethaler, and the in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with unlayered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface layering lactose carrier were significantly different, showing that the in vitro inhalation properties of the drug/carrier powder mixtures were improved. In vitro deposition properties (RP) increased with surface layering time. Using this surface layering system would thus be valuable for increasing the inhalation properties of dry powder inhalation.     

In situ synthesis of polysulfides covalently bonded to silica

Silanol groups, triple bond SiOH, on the surface of silica were esterified with unsaturated alcohols and long-chain alcohols bearing thiol groups. The modified silicas obtained were used as substrates for a vulcanization-analogous reaction with sulfur catalyzed by zinc dimethyldithiocarbamate. Surface-esterified thiols could be smoothly converted to bridged polysulfides bonded to the silica surface, whereas the use of surface-esterified unsaturated alcohols led to removal of the surface-esterified alcohol from the silica surface. The materials were characterized by solid-state NMR and thermal and microanalytical analysis. The linking of surface-esterified alkenols and thiols by sulfide bridges was investigated by a numerical model for a flat surface. This showed that for a typical density of 3-4 micromol/m(2) surface groups, a statistical maximum of 70-75% of groups could be linked by S(n) bridges (n=2-4).     

Fluorinated 2-Vinylcyclopropane Copolymers as Low Surface Energy Materials

The surface structure and surface energy properties of fluorinated 2-vinylcyclopropane copolymers were investigated. The copolymers were prepared by free radical ring opening polymerization of fluorinated 1 and non-fluorinated 2 2-vinylcyclopropanes. NEXAFS experiments proved that the film surface was ordered with the fluorinated side groups possessing a relatively high orientational order. Contact angle measurements with different interrogating liquids permitted the polymer surface tension to be estimated. These surfaces showed both hydrophobic and oleophobic character, consistent with a low surface energy.     

Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces

The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (theta e>90 degrees ) by castor oil.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Electronic and crystalline structure of Si/SiO2 interface modified by ArF excimer laser

The native oxide layers on Si(100) surface were irradiated under UHV conditions by an ArF excimer laser pulses with energy density varied between melting and evaporating thresholds. The resulting changes were studied by LEED, AES and UPS. The increase of the energy density up to evaporation threshold results in the recrystallisation of native oxide layer. The pulses with energy densities just above the evaporation threshold ablate the top layer leaving an ordered and atomicaly clean surface. The observed (1x1) surface reconstruction is probably stabilised by strains introduced during rapid melting and quenching of the topmost layers. The surface electronic structure is dominated by random satisfaction of dangling bonds swearing a well defined surface states observed on (2x1)Si(100) surface.     

纳米氧化锌的合成及表面改性

以硫酸锌、尿素为原料,采用均相沉淀法合成了纳米氧化锌.研究了硬脂酸对所制的纳米氧化锌粉体表面改性的机理及其对粉体亲油性的影响.实验结果表明,硬脂酸中的羧基与纳米氧化锌粉体颗粒表面的羟基发生了酯化反应,并在表面形成单分子膜.经过表面改性的纳米氧化锌由亲水性转化为亲油性.同时,就纳米氧化锌粉体硬脂酸表面改性反应,探讨了反应摩尔分数、反应温度和反应时间对产物的影响,从而筛选出粉体亲油性最大的反应条件为:硬脂酸质量分数为7%;反应温度为50℃;反应时间为1h.     

活性炭表面性质对氧气扩散电极电催化性能的影响

 分别采用硝酸和空气氧化处理制得具有不同表面性质的粉末活性炭,并以此为催化层材料制成炭基氧气扩散电极,测定了不同电极的极化曲线和电化学阻抗谱. N2物理吸附和He程序升温脱附(He-TPD)研究表明,硝酸处理对活性炭孔结构的影响较小,但可使其表面含氧基团明显增加; 而空气氧化处理则会导致活性炭的中孔面积和孔容显著增大,但对表面含氧基团的影响较小. 极化曲线和电化学阻抗谱研究发现,当活性炭的孔结构相近时,电极的催化性能随着表面含氧基团的增多而急剧下降; 当活性炭表面含氧基团的量相近时,中孔孔容增大将导致电极催化性能的恶化. 与活性炭表面含氧基团相比,孔结构对氧气扩散电极的电化学性能具有更显著的影响.     

Ultrathin gradient films using thiol‐ene polymerizations

The application of surface‐attached, thiol‐ene polymer films for controlling material properties in a gradient fashion across a surface was investigated. Thiol‐ene films were attached to the surface by first depositing a thiol‐terminated self‐assembled monolayer and performing a thiol‐ene photopolymerization reaction on the surface. Property gradients were created either by creating and modifying a gradient in the surface thiol density in the SAM or by changing the polymerization conditions or both. Film thickness was modified across the substrate by changing either the density of the anchoring thiol functional groups or by changing the reaction conditions such as exposure time. Thicker films (1–11 nm) were obtained by polymerizing acrylate polymer brushes from the surface with varying exposure time (0–60 s). The two factors, that is, the surface thiol density and the exposure time, were combined in orthogonal directions to obtain thiol‐ene films with a two‐dimensional thickness gradient with the maximum thickness being 4 nm. Finally, a thiol‐acrylate Michael type addition reaction was used to modify the surface thiol density gradient with the cell‐adhesive ligand, Arg‐Gly‐Asp‐Ser (RGDS), which subsequently yielded a gradient in osteoblast density on the surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7027–7039, 2006     

Synthesis and characterization of amino-functionalized silica nanoparticles

Monodispersed raw silica nanoparticles (RSNPs) with the particle size of 40 nm were successfully fabricated by condensation reaction of tetraethylorthosilicate in methanol with high concentration ammonia (1.2 M). The RSNPs were treated with the coupling agent 3-aminopropyltrimethoxysilane (APTMS) for grafting amine groups on the surface to obtain the amino-functionalized silica nanoparticles (ASNPs). The chemical structure and surface morphology of RSNPs and ASNPs were characterized by Fourier-transform infrared spectra, solid-state NMR spectra and scanning electron microscopy. In addition, a method to quantify the grafted amine groups on the surface of ASNPs was developed by using the ninhydrin assay. The ninhydrin analysis showed that 60 mol % of the APTMS molecules were immobilized on the surface, that is, 4.4 amine groups per nm2 of surface area were bonded on nonporous ASNPs. The weight loss of particles obtained from thermogravimetry analysis indicated the amount of grafted amine groups and was used as a reference to compare with the value determined from ninhydrin method.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Surface modification of low-density polyethylene by inductively coupled argon plasma

The surface chemistry and nanotopography of low-density polyethylene (LDPE) were modified by downstream, inductively coupled, radio frequency (rf) Ar plasma without inducing surface damage. The extent of surface modification was controlled by the applied ion energy fluence, determined from the plasma ion density measured with a Langmuir probe. The treated LDPE surfaces were characterized by atomic force microscope (AFM) imaging, contact angle measurements, and X-ray photoelectron spectroscopy (XPS). Analysis of AFM surface images confirmed that topography changes occurred at the nanoscale and that surface damage was insignificant. Contact angle measurements demonstrated an enhancement of the surface hydrophilicity with the increase of the plasma power. XPS results showed surface chemistry changes involving the development of different carbon-oxygen functionalities that increased the surface hydrophilicity. Physical and chemical surface modification was achieved under conditions conducive to high-density inductively coupled rf plasma.     

Interfacial behavior of lipid nanocapsules spread on model membrane monolayers

The lipid nanocapsules (LNCs) spread at the air–water interface (A/W) undergo destabilization and disaggregation leading to formation of a triglyceride (TG) surface film. The kinetics of reorganization and formation of TG surface film were followed by measuring either the change of surface pressure at constant area or the surface area at constant surface pressure. From the obtained experimental data were determined the effectiveness of TG spreading and the rate of LNC disaggregation at A/W interface covered with preformed model membrane monolayers of DPPC, Curosurf®, and mucus. Partial LNC stabilization due to their interaction with the model membrane monolayers was observed and characterized by atomic force microscopy (AFM). The obtained results demonstrated that the LNCs spread on mucus surface layer, which models the epithelial surface were more stable than if they were spread either on DPPC or Curosurf® surface layers, which emulate the alveolar surface.