BaZrO3和CaZrO3能带和光学性质的第一性原理研究

采用基于密度泛函理论基础上的CASTEP软件包,计算了BaZrO3和CaZrO3的能带以及光学性质.计算得到BaZrO3直接带隙和间接带隙分别为3.49 eV和3.23eV,CaZrO3直接带隙和间接带隙分别为3.73 eV和3.38 eV.对这两种材料的介电函数、吸收系数、反射系数、折射系数、湮灭系数和能量损失系数等光学系数进行了计算,并基于电子能带对光学性质进行了解释.得出,光学特性的异同是由于其内部微观结构上的异同所引起的.     

Electronic structure,physico-chemical,linear and non linear optical properties analysis of coronene, 6B-, 6N-, 3B3N- substituted C24H12 using RHF,B3LYP and wB97XD methods

In this work we have investigated the effects of substituting carbon atoms with B, N and BN on the electronic structure, physico-chemical, linear and non linear optical properties of Coronene (C24H12) using HF and DFT methods. We have calculated total electronic energy E₀, zero point vibrational energy ZPVE, the enthalpy H, entropy S, molar heat capacity at constant volume C_v, ionization potential IP, electron affinity EA, hardness \(\kappa\), softness \(\vartheta\), electronegativity EN, dipole moment µ, average polarizability \(< \alpha >\), anisotropy \(\Delta \alpha\), the first molecular hyperpolarizability β_mol, second order hyperpolarizability \(\gamma_{av}\), HOMO–LUMO Energy gap E_gap, work function E_F, refractive index n, susceptibility χ, dielectric constant ε and molar refractivity MR of coronene (C24H12), the 6B-, 6N- and 3B3N- substitute-doped C24H12 C18B6H12 C18N6H12 and C18B3N3H12. The E_gap values of the molecules are between 0.91 and 2.36 eV. We observed that β_mol changes slightly when C24H12 is doped with either 6B or 6N even though their β_mol values are too small. However, by doping C24H12 with both 3B and 3N, creating a strong donor–acceptor system, a very large increase in µ and β_mol was found for C18B3N3H12. This study was done using RHF, B3LYP and wB97XD methods with the cc-pVDZ basis set. The studies have shown that doping decreases some of the above properties significantly while some increases significantly compared to pure coronene, suggesting that 6B-, 6N-, and 3B3N-doped Coronene as serious candidates for electronics, optoelectronics and photonic devices.     

Electronic energy gaps and optical properties of LaMnO3

We investigate electronic structure and optical properties of LaMnO₃ through density-functional-theory calculations with a recent improved exchange potential. Calculated gaps are consistent with recent experimental values, and calculated optical conductivities and dielectric constants as functions of photon energy are in excellent agreement with low-temperature experimental results. These lead to a satisfactory theoretical understanding of the electronic gaps and optical properties of LaMnO₃ without tuning atomic parameters and can help elucidate electronic structures and magnetic properties of other manganite materials.     

Influence of valence electron concentration on elastic, electronic and optical properties of the alkaline-earth tin oxides A3SnO (A=Ca, Sr and Ba): A comparative study with ASnO3 compounds

By employing first principles method of the plane wave pseudo potential calculations (PP-PW), based on the density functional theory (DFT), within the local density approximation (LDA), the correlation between valence electron concentration and structural, elastic, electronic as well as optical properties of A₃SnO and ASnO₃ compounds where A=Ca, Sr and Ba are investigated. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk, shear and Young's moduli for ideal monocrystalline and for polycrystalline A₃SnO and ASnO₃ aggregates. Band structures reveal that alkaline-earth tin oxides A₃SnO are direct energy band gap (G-G) materials.The hardness of these compounds was explained using chemical bonding properties and Milliken charges transfer. The optical constants, including the dielectric function, optical reflectivity, refractive index and electron energy loss, are calculated for radiation up to 20 eV. We have found that the static dielectric constants of all these compounds are in good agreement with Penn model.     

Structural, electronic and optical properties of orthorhombic distorted perovskite TbMnO3

This paper calculates the structural parameters, electronic and optical properties of orthorhombic distorted perovskite-type TbMnO3 by first principles using density functional theory within the generalised gradient approximation. The calculated equilibrium lattice constants are in a reasonable agreement with theoretical and experimental data. The energy band structure, density of states and partial density of states of elements are obtained. Band structures show that TbMnO3 is an indirect band gap between the O 2p states and Mn 3d states, and the band gap is of 0.48 eV agreeing with experimental result. Furthermore, the optical properties, including the dielectric function, absorption coefficient, optical reflectivity, refractive index and energy loss spectrum are calculated and analysed, showing that the TbMnO3 is a promising dielectric material.     

First-principles calculations of structural, electronic, optical and elastic properties of magnesite MgCO3 and calcite CaCO3

Detailed ab initio calculations of the structural, electronic, optical and elastic properties of two crystals - magnesite (MgCO₃) and calcite (CaCO₃) - are reported in the present paper. Both compounds are important natural minerals, playing an important role in the carbon dioxide cycling. The optimized crystal structures, band gaps, density of states diagrams, elastic constants, optical absorption spectra and refractive indexes dependence on the wavelength all have been calculated and compared, when available, with literature data. Both crystals are indirect band compounds, with calculated band gaps of 5.08 eV for MgCO₃ and 5.023 eV for CaCO₃. Both values are underestimated by approximately 1.0 eV with respect to the experimental data. Although both crystals have the same structure, substitution of Mg by Ca ions leads to certain differences, which manifest themselves in noticeable change in the electronic bands profiles and widths, shape of the calculated absorption spectra, and values of the elastic constants. Response of both crystals to the applied hydrostatic pressure was analyzed in the pressure range of phase stability, variations of the lattice parameters and characteristic interionic distances were considered. The obtained dependencies of lattice constants and calculated band gap on pressure can be used for prediction of properties of these two hosts at elevated pressures that occur in the Earth's mantle.     

Electronic excitations and luminescence of SrMgF4 single crystals

The electronic and crystal structures of SrMgF₄ single crystals grown by the Bridgman method have been investigated. The undoped SrMgF₄ single crystals have been studied using low-temperature (T = 10 K) time-resolved fluorescence optical and vacuum ultraviolet spectroscopy under selective excitation by synchrotron radiation (3.7–36.0 eV). Based on the measured reflectivity spectra and calculated spectra of the optical constants, the following parameters of the electronic structure have been determined for the first time: the minimum energy of interband transitions E _g = 12.55 eV, the position of the first exciton peak E _n = 1 = 11.37 eV, the position of the maximum of the “exciton” luminescence excitation band at 10.7 eV, and the position of the fundamental absorption edge at 10.3 eV. It has been found that photoluminescence excitation occurs predominantly in the region of the low-energy fundamental absorption edge of the crystal and that, at energies above E _g , the energy transfer from the matrix to luminescence centers is inefficient. The exciton migration is the main excitation channel of photoluminescence bands at 2.6–3.3 and 3.3–4.2 eV. The direct photoexcitation is characteristic of photoluminescence from defects at 1.8–2.6 and 4.2–5.5 eV.     

Electronic,optical, vibrational and EFG properties of tetragonal BaTiO3 under pressure: By first-principles study

The First principles study on structural, electronic, Electron Field Gradient (EFG), optical and vibrational properties of tetragonal BaTiO₃ have been done in the framework of Density Functional Theory (DFT). Obtained structural properties are in agreement with others, and also the electronic study shows that the tetragonal BaTiO₃ has an indirect energy gap (E_g) about 1.864 eV by GGA and 2.6 eV by GGA-mbj at equilibrium state which E_g shifts toward small values by decreasing pressure. By increasing pressure to 31.479 GPa, the EFG decrease for O atom, and increase for Ba and Ti atoms that is a sign to piezoelectric property for tetragonal BaTiO₃. The optical parameters were studied under pressure, such as the real and imaginary parts of the dielectric function, Loss function, reflection index, absorption coefficient, conductivity and reflection. Moreover, by applying hydrostatic pressure, the roots of the real part of the dielectric function shift toward higher energies, and the energy loss and absorption peak intensity were reduced. Finally, lattice vibration survey indicates the stability of tetragonal BaTiO₃ under pressure.     

Ab-initio study of Li based chalcopyrite compounds LiGaX2 (X= S,Se, Te) in tetragonal symmetry: A class of future materials for optoelectronic applications

Structural, electronic, optical, and thermoelectric aspects of chalcopyrite LiGaX₂ (X = S, Se and Te) compounds have been investigated by density functional theory (DFT) based Wien2k simulator. The optimized ground state parameters are calculated by Wu-Cohen generalized gradient approximation (WC-GGA) and electronic structures, which have been further improved by modified Becke-Johnson (mBJ) potential. Moreover, a comparative study is given among the contribution of three anions (S, Se and Te) in the same symmetry of tetragonal phase. The calculated band gaps of the studied compounds are 3.39, 2.83, and 1.96 eV for LiGaS_2, LiGaSe₂ and LiGaTe₂, respectively. The observed band gaps consider the studied compounds are potential materials for optoelectronic devices. In addition, the optical response of the studied materials has been analyzed in terms of dielectric constants, refraction, absorption, reflectivity and energy loss function. We have also reported the thermoelectric properties like Seebeck coefficient, thermal and electrical conductivities, and figure of merit as function of temperatures by using BoltzTrap code. The high thermal efficiency and absorption spectra in the visible region make the studied materials multifunctional for energy applications.     

First principles study of structural, elastic, electronic and optical properties of the cubic perovskite BaHfO3

First principles study of structural, elastic, electronic and optical properties of the cubic perovskite-type BaHfO₃ has been reported using the pseudo-potential plane wave method within the local density approximation. The calculated equilibrium lattice is in a reasonable agreement with the available experimental data. The elastic constants and their pressure dependence are calculated using the static finite strain technique. A linear pressure dependence of the elastic stiffnesses is found. Band structures show that BaHfO₃ is a direct band gap between the occupied O 2p and unoccupied Hf d states. The variation of the gap versus pressure is well fitted to a quadratic function. Furthermore, in order to understand the optical properties of BaHfO₃, the dielectric function, absorption coefficient, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. We have found that O 2p states and Hf 5d states play a major role in the optical transitions as initial and final states, respectively. This is the first quantitative theoretical prediction of the elastic, electronic and optical properties of BaHfO₃ compound, and it still awaits experimental confirmation.     

A flexible piezoelectric-triboelectric hybrid nanogenerator in one structure with dual doping enhancement effects

For achieving more effective mechanical energy conversion, based on low-cost and flexible polydimethylsiloxane (PDMS) and polyvinylidene fluoride (PVDF) polymer film as triboelectric and piezoelectric function layer respectively, a polymer-based hybrid piezoelectric-triboelectric nanogenerator (PT-NG) with a structure of Al/PVDF/Cu-PDMS/indium tin oxide (ITO)/polyethylene terephthalate (PET) has been demonstrated. The device has realized the simultaneous triboelectric and piezoelectric conversions in one structure. In addition, when PDMS and PVDF are further modified by graphene quantum dot (GQD) and titanium dioxide (TiO₂) nanoparticles respectively, both triboelectric and piezoelectric outputs of the modified device are greatly enhanced synchronously. The experimental results have indicated that the increase of triboelectric output is due to the improvement of dielectric properties of PDMS film doped with conductive GQDs as well as the enhancement of the effective contact caused by the change of PDMS surface microstructure. While the promotion of piezoelectric output is mainly attributed to the fact that PVDF film after TiO₂ modification induces more polarized β phase with a polarization-free process. Accordingly, the modified device converts mechanical energy into electricity more effectively, which shows a promising prospect in the fields of flexibility display, electronic skin, wearable electronic products and self-powered sensors.     

Structural,electronic, optical,elastic and thermal properties of ZnXAs<Subscript>2</Subscript> (X = Si and Ge) chalcopyrite semiconductors

We report first principles calculations of solid state properties of ZnSiAs₂ and ZnGeAs₂ chalcopyrite semiconductors. The structural properties are calculated using a Full Potential Linearized Augmented Plane Wave method (FP-LAPW) of the Density Functional Theory (DFT). A Generalized Gradient Approximation (GGA) scheme proposed by Wu and Cohen (WC) has been chosen to calculate electronic and optical properties. Optical features such as dielectric functions, refractive indices, extinction coefficient, optical reflectivity, absorption coefficients and optical conductivities were calculated for photon energies up to 30 eV. The elastic constants at equilibrium in tetragonal structure are also determined. Temperature effect on the volume, thermal expansion, heat capacity, Debye temperature, entropy, Grüneisen parameter and bulk modulus were calculated employing the quasi-harmonic Debye model at different temperatures and pressures and the silent results were interpreted. Finally using semi-empirical relation, we determined the hardness of the materials which attributed to different covalent bonding strengths.     

Structural,elastic, electronic and optical properties of the cubic perovskites CaXO3 (X=Hf and Sn)

The structural, elastic, electronic and optical properties of CaXO₃ compounds with the cubic perovskites structure have been investigated, by employing a first principles method, using the plane wave pseudo potential calculations (PP-PW), based on the density functional theory (DFT), within the local density approximation (LDA). The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk, shear and Young’s moduli for ideal monocrystalline and for polycrystalline CaXO₃ aggregates which we have classified as ductile in nature. Band structures reveal that these compounds are indirect energy band gap (R-G) semiconductors; the analysis of the site and momentum projected densities, valence charge density bond length, bond population and Milliken charges, shows that bonding is of covalent–ionic nature. We have found that the elastic constants C₁₁, C₁₂, C₄₄ are in good correlation with the bonding properties. The optical constants, including the dielectric function, optical reflectivity, refractive index and electron energy loss, are calculated for radiation up to 20 eV.     

Elastic,electronic structure,and optical properties of orthorhombic Na<Subscript>3</Subscript>AlF<Subscript>6</Subscript>: a first-principles study

First-principles investigation of elastic, electronic, and optical properties of orthorhombic Na₃AlF₆ has been carried out by DFT using plane-wave pseudo-potentials within the LDA and GGA. Calculated lattice parameters agree well with experimental results. From calculated elastic constants, Na₃AlF₆ is a mechanically stable anisotropic and behaves in a ductile manner. Electronic structure analysis indicates that Na₃AlF₆ behaves as an insulator with a direct band gap of 6.065 eV in LDA and 5.868–5.949 eV in GGA. DOS, population analysis, and charge densities difference indicate that Al-F bonds are mainly ionic as well as partially covalent due to the hybridization of F-2p and Al-3s (3p) states. Moreover, the imaginary part of calculated dielectric function ε₂(ω) shows three prominent peaks due to the inter band transitions F 2p states→Na 3s states. From calculated ε (ω), other optical properties such as reflectivity and refractive index are also obtained up to the photon energy range of 40 eV.     

Structural, morphological and optical properties of CuAlS2 films deposited by spray pyrolysis method

The structural, morphological and optical properties of CuAlS₂ films deposited by spray pyrolysis method have been investigated. CuAlS₂ in the form of films is prepared at different deposition conditions by a simple and economical spray pyrolysis method. The structural, surface morphology and optical properties of the films were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscope (AFM) and absorbance spectra, respectively. The films were polycrystalline, crystallized in a tetragonal structure, and are preferentially orientated along the (1 1 2) direction. Grain size values, dislocation density, and d% error of CuAlS₂ films were calculated. The optical band gap of the CuAlS₂ film was found to be 3.45 eV. The optical constants such as refractive index, extinction coefficient and dielectric constants of the CuAlS₂ film were determined. The refractive index dispersion curve of the film obeys the single oscillator model. Optical dispersion parameters E_o and E_d developed by Wemple-DiDomenico were calculated and found to be 3.562 and 12.590 eV.     

Concentration-dependent electronic structure and optical absorption properties of B-doped anatase TiO2

The concentration-dependent electronic structures and optical properties of B-doped anatase TiO₂ have been calculated using the density functional theory. The calculated results indicate that the electronic structures of B-doped TiO₂ have changed compared with those of pure TiO₂, which is mainly due to the new midgap states induced by B doping. As to the optical properties, we calculate the imaginary part of dielectric function ε₂(ω) and optical absorption spectra of pure and B-doped TiO₂. Two transitions E₁ and E₂ emerged after B doping. The intensity of absorption is enhanced by B doping both in the UV and visible regions. According to the results of imaginary part of dielectric function ε₂(ω) and DOS, it can be concluded that the two optical transitions correspond to the transitions from the O 2p states in the top of valence band to the midgap states and from the midgap states to the Ti 3d states in the bottom of conduction band, respectively. These results have important implications for the further development of photocatalytic materials.     

Density functional studies of selected metal dioxides

This study investigates the optical properties of selected metal oxides due to their high dielectric constants. The local-spin-density approximation plus Hubbard U (commonly called LDA+U) is used in a study of the structural, mechanical and optical properties of UO₂. The inclusion of a Hubbard U correction to 5f electrons of uranium changes UO₂ from a metal to an insulator and, therefore, has a dramatic effect on the localisation of the electron spin and charge density of uranium. However although the band gap can be reproduced using the effective U parameter, which is equal to 3.5 eV and optical properties were calculated in our previous work, it is difficult to calculate ionic contribution to the static dielectric constant within LDA+U formalism for this compound. It is shown in the present work that the electronic structures of both ceria and thoria exhibit similarities to urania within LDA or PBE functional implementations. Within this functional and linear response theory one can easily calculate static dielectric permittivity and it is shown that in agreement with experiment the predicted values are an order of magnitude larger than the dielectric constant of SiO₂. In this work, high accuracy, first-principles calculations are also used to compare properties of urania versus ceria and thoria and how these similarities can help in understanding these compounds. It is also shown that the B3LYP functional predicts slightly overestimated band gaps for ceria and thoria as well as smaller than experimentally observed electronic contribution to the static dielectric constant, while the index of refraction is well reproduced for thoria.     

不同价态稀土元素Yb掺杂ZnO的电子结构和光学性质

基于密度泛函理论, 采用第一性原理平面波超软赝势法, 对六方纤锌矿结构的ZnO晶体和Yb²⁺, Yb³⁺分别掺杂ZnO晶体进行几何优化, 并在此基础上计算得到了未掺杂ZnO晶体及不同价态Yb元素掺杂ZnO体系的空间结构、 能带、电子态密度及光学性质.结果表明: 掺杂后体系形成能减少, 稳定性增加, 并引入了Yb-4f杂质能级. 掺杂不同价态的Yb元素对能带结构产生了不同的影响, 并且都使体系的光学性质发生了明显变化.与纯ZnO相比, Yb²⁺, Yb³⁺ 分别掺杂ZnO体系的介电函数虚部在0.46 eV处均出现新峰, 静态介电函数明显增大, 吸收带边均红移, 并在0.91 eV处出现较强吸收峰, 对产生这一现象的原因给出了定性的讨论. 关键词： 掺杂 ZnO 不同价态 第一性原理     

Cs2InGaX6 (X=Cl,Br, or I): Emergent Inorganic Halide Double Perovskites with enhanced optoelectronic characteristics

During the last decade, Inorganic Halide Double Perovskite materials have attracted widespread interest as a promising eco-friendly and non-toxic alternative to lead based hybrid halide organic–inorganic perovskites materials, with outstanding Stability, Structural and electronic properties. In this study, First-Principles density functional theory (DFT) calculations were performed on the structural, stability, electronic and optical properties of the transition metal-based double perovskites materials Cs₂InGaX₆ (X = Cl, Br, or I). Our results reveal that all these materials exhibit excellent thermodynamic and structural stability owing to their negative formation energies and Goldsmith's factors. It is also observed that Cs₂InGaCl₆, Cs₂InGaBr₆, and Cs₂InGaI₆ materials exhibit band gaps calculated by different functional (GGA-PBE and TB-mpj) in visible-range between 0.89 and 3.24 eV. Furthermore, the computed optical properties reveal strong absorption in UV, visible, and IR range with high optical conductivity and low reflectivity. These obtained results predict that the three transition metal-based double perovskites materials carries promising application in nano-electronic and optoelectronic device applications and can be considered as photovoltaic absorber materials.     

First principles investigation of electronic and optical properties of AgAlO2

The electronic and optical properties of AgAlO₂ were determined by using Generalized Gradient Approximation (GGA) suggested by Perdew–Burke–Ernzerhof (PBE) with the addition of Hubbard potential along with linearized augmented plane wave pseudopotential. Our computed band structure infers that our calculated bandgap (1.5?eV) is closer to the experimental (2.81?eV) as compare to the previous theoretical values (1.16?eV). The investigated band structure also reflects that AgAlO₂ is an indirect semiconductor material. The investigated atomic positions and lattice constants are in good agreement with the experimental values than the earlier theoretical values. From presented optical properties one can observe that AgAlO₂ is a good conducting material. The absorption spectrum infers that AgAlO₂ is an expensive material for photo-electronic devices or solar-cell applications.