Bioethanol Production from Soybean Residue via Separate Hydrolysis and Fermentation

Bioethanol was produced using polysaccharide from soybean residue as biomass by separate hydrolysis and fermentation (SHF). This study focused on pretreatment, enzyme saccharification, and fermentation. Pretreatment to obtain monosaccharide was carried out with 20% (w/v) soybean residue slurry and 270 mmol/L H₂SO₄ at 121 °C for 60 min. More monosaccharide was obtained from enzymatic hydrolysis with a 16 U/mL mixture of commercial enzymes C-Tec 2 and Viscozyme L at 45 °C for 48 h. Ethanol fermentation with 20% (w/v) soybean residue hydrolysate was performed using wild-type and Saccharomyces cerevisiae KCCM 1129 adapted to high concentrations of galactose, using a flask and 5-L fermenter. When the wild type of S. cerevisiae was used, an ethanol production of 20.8 g/L with an ethanol yield of 0.31 g/g consumed glucose was obtained. Ethanol productions of 33.9 and 31.6 g/L with ethanol yield of 0.49 g/g consumed glucose and 0.47 g/g consumed glucose were obtained in a flask and a 5-L fermenter, respectively, using S. cerevisiae adapted to a high concentration of galactose. Therefore, adapted S. cerevisiae to galactose could enhance the overall ethanol fermentation yields compared to the wild-type one.     

Acetone–Butanol–Ethanol Production from Waste Seaweed Collected from Gwangalli Beach,Busan, Korea,Based on pH-Controlled and Sequential Fermentation Using Two Strains

The optimal conditions for acetone–butanol–ethanol (ABE) production were evaluated using waste seaweed from Gwangalli Beach, Busan, Korea. The waste seaweed had a fiber and carbohydrate, content of 48.34%; these are the main resources for ABE production. The optimal conditions for obtaining monosaccharides based on hyper thermal (HT) acid hydrolysis of waste seaweed were slurry contents of 8%, sulfuric acid concentration of 138 mM, and treatment time of 10 min. Enzymatic saccharification was performed using 16 unit/mL Viscozyme L, which showed the highest affinity (K_m?=?1.81 g/L). After pretreatment, 34.0 g/L monosaccharides were obtained. ABE fermentation was performed with single and sequential fermentation of Clostridium acetobutylicum and Clostridium tyrobutyricum; this was controlled for pH. A maximum ABE concentration of 12.5 g/L with Y_ABE 0.37 was achieved using sequential fermentation with C. tyrobutyricum and C. acetobutylicum. Efficient ABE production from waste seaweed performed using pH-controlled culture broth and sequential cell culture.     

Production of ethanol from waste paper using immobilized yeasts

This work is aimed at a selection of yeast strains suitable for simultaneous saccharification and fermentation of waste paper. The waste paper, as a lignocellulosic material, represents an unconventional source for the production of ethanol which is a promising alternative fuel. The yeast strains Saccharomyces cerevisiae and Pichia kudriavzevii produced the highest amounts of ethanol at 30 °C and were also resistant at 40 °C during the first 92 h of fermentation. These two strains were immobilized by entrapment into poly(vinyl alcohol) hydrogel lens-shaped particles LentiKats^®. The immobilized S. cerevisiae was a better ethanol producer and retained higher metabolic activity in repeated batch fermentations than P. kudriavzevii. The immobilized S. cerevisiae was also suitable for a long-term storage, with 23% decrease in the ethanol production ability after 1-year storage of yeast cells.     

Enhanced Bioethanol Production from Potato Peel Waste Via Consolidated Bioprocessing with Statistically Optimized Medium

In this study, an extensive screening was undertaken to isolate some amylolytic microorganisms capable of producing bioethanol from starchy biomass through Consolidated Bioprocessing (CBP). A total of 28 amylolytic microorganisms were isolated, from which 5 isolates were selected based on high α-amylase and glucoamylase activities and identified as Candida wangnamkhiaoensis, Hyphopichia pseudoburtonii (2 isolates), Wickerhamia sp., and Streptomyces drozdowiczii based on 26S rDNA and 16S rDNA sequencing. Wickerhamia sp. showed the highest ethanol production (30.4 g/L) with fermentation yield of 0.3 g ethanol/g starch. Then, a low cost starchy waste, potato peel waste (PPW) was used as a carbon source to produce ethanol by Wickerhamia sp. Finally, in order to obtain maximum ethanol production from PPW, a fermentation medium was statistically designed. The effect of various medium ingredients was evaluated initially by Plackett-Burman design (PBD), where malt extracts, tryptone, and KH₂PO₄ showed significantly positive effect (p value < 0.05). Using Response Surface Modeling (RSM), 40 g/L (dry basis) PPW and 25 g/L malt extract were found optimum and yielded 21.7 g/L ethanol. This study strongly suggests Wickerhamia sp. as a promising candidate for bioethanol production from starchy biomass, in particular, PPW through CBP.     

Utilization of Cheese Whey Using Synergistic Immobilization of β-Galactosidase and <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> Cells in Dual Matrices

Whey is a byproduct of the dairy industry, which has prospects of using as a source for production of various valuable compounds. The lactose present in whey is considered as an environmental pollutant and its utilization for enzyme and fuel production, may be effective for whey bioremediation. The dairy yeast Kluyveromyces marxianus have the ability to utilize lactose sharply as the major carbon source for the production of the enzyme. Five strains were tested for the production of the β-galactosidase using whey. The maximum β-galactosidase activity of 1.74 IU/mg dry weight was achieved in whey using K. marxianus MTCC 1389. The biocatalyst was further immobilized on chitosan macroparticles and exhibited excellent functional activity at 35 °C. Almost 89 % lactose hydrolysis was attained for concentrated whey (100 g/L) and retained 89 % catalytic activity after 15 cycles of reuse. Finally, β-galactosidase was immobilized on chitosan and Saccharomyces cerevisiae on calcium alginate, and both were used together for the production of ethanol from concentrated whey. Maximal ethanol titer of 28.9 g/L was achieved during fermentation at 35 °C. The conclusions generated by employing two different matrices will be beneficial for the future modeling using engineered S. cerevisiae in scale-up studies.     

Spectroscopic validation and biological screening of new iron(III) complexes with N,O donor ligands

Monometallic trivalent complexes of iron were synthesized by reaction between N, O type donor ligands (L) or (L′) and metal salt in a 1:2 (metal:ligand) molar ratio. Structure and composition of metal complexes were evaluated by elemental analysis, conductance measurements, magnetic moment measurements, and various spectroscopic studies viz. FTIR, UV–visible, and ESI–MS. Analytical and molar conductance data are consistent with the formulation of complexes as [Fe(L)₂X₂]·X and [Fe(L′)₂X₂]·X (where; L = Hydrazine carboxylic acid ethyl ester, L′ = Hydrazine carboxylic acid tert-butyl ester and X = Cl^?, Br^? or NO₃ ^?) due to their 1:1 electrolytic nature. IR spectral data revealed bi-dentate coordination behavior of ligands. An octahedral geometry may be assigned for metal complexes on the basis of electronic absorption data and magnetic moment parameters. The compounds were evaluated for their biological activity by in vitro antimicrobial screening against bacteria Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Salmonella typhi and fungi Candida parapsilosis and Saccharomyces cerevisiae. The results indicate that metal complexes exhibit more activity than free ligands against studied microbes.     

Synthesis,structure and electrochemical properties of some thiosemicarbazone complexes of iridium

Reaction of thiosemicarbazones of salicylaldehyde and 2-hydroxyacetophenone (H₂L¹ and H₂L²) with [Ir(PPh₃)₃Cl] affords complexes of type [Ir(PPh₃)₂(L)(H)] (L = L¹ or L²) in ethanol. A similar reaction carried out in toluene affords the [Ir(PPh₃)₂(L)(H)] complexes along with complexes of type [Ir(PPh₃)₂(L)Cl], where a chloride is coordinated to iridium instead of the hydride. The structure of the [Ir(PPh₃)₂(L²)(H)] and [Ir(PPh₃)₂(L²)Cl] complexes has been determined by X-ray crystallography. Crystal data for [Ir(PPh₃)₂(L²)(H)]: space group, P2₁/c; crystal system, monoclinic; a=12.110(2) Å, b=17.983(4) Å, c=18.437(4) Å, β=103.42(3)°, Z=4; R ₁=0.0591, wR ₂=0.1107. Crystal data for [Ir(PPh₃)₂(L²)Cl]: space group, P2₁/c; crystal system, monoclinic; a=17.9374(11) Å, b=19.2570(10) Å, c=24.9135(16) Å, β=108.145(5)°, Z=4; R ₁=0.0463, wR ₂=0.0901. In all the complexes the thiosemicarbazones are coordinated to the metal center as dianionic tridentate O, N, S-donors and the two triphenylphosphines are trans. The complexes are diamagnetic (low-spin d? ⁶, S=0) and show intense MLCT transitions in the visible region. Cyclic voltammetry on all the [Ir(PPh₃)₂(L)(H)] and [Ir(PPh₃)₂(L)Cl] complexes shows a quasi-reversible Ir(III)–Ir(IV) oxidation within 0.55–0.78 V vs. SCE followed by an irreversible oxidation of the thiosemicarbazone within 0.91–1.27 V vs. SCE. An irreversible reduction of the thiosemicarbazone is also observed within ?1.10 to ?1.23 V vs. SCE.     

The Influence of Different Strategies for the Saccharification of the Banana Plant Pseudostem and the Detoxification of Concentrated Broth on Bioethanol Production

Pseudostem of the Musa cavendishii banana plant was submitted to chemical pretreatments with acid (H₂SO₄ 2%, 120 °C, 15 min) and with alkali (NaOH 3%, 120 °C, 15 min), saccharified by commercial enzymes Novozymes® (Cellic CTec2 and HTec2). The influences of the pretreatments on the degradation of the lignin, cellulose and hemicellulose, porosity of the surface, particle crystallinity, and yield in reducing sugars after saccharification (Y _RS), were established. Different concentrations of biomass (70 and 100 g/L in dry matter (dm)), with different physical differences (dry granulated, crushed wet bagasse, and whole pseudostem), were used. The broth with the highest Y _RS among the different strategies tested was evaporated until the concentration of reducing sugars (RS) was to the order of 100 g/L and fermented, with and without prior detoxification with active carbon. Fermentation was carried out in Erlenmeyer flasks, at 30 °C, initial pH 5.0, and 120 rpm. In comparison to the biomass without chemical pretreatment and to the biomass pretreated with NaOH, the acid pretreatment of 70 g/L of dry granulated biomass enabled greater digestion of hemicellulose, lower index of cellulose crystallinity, and higher Y _RS (45.8 ± 0.7%). The RS increase in fermentation broth to 100 g/L, with posterior detoxification, presented higher productivity ethanol (Q _P = 1.44 ± 0.02 g/L/h) with ethanol yield (Y _P/RS) of 0.41 ± 0.02 g/g. The value of Q _P was to the order of 75% higher than Q _P obtained with the same broth without prior detoxification.     

Synthesis,crystal structure of new linear trinuclear isovalence Co(II)([Co<Subscript>3</Subscript>(H–L)<Subscript>2</Subscript>(L)<Subscript>2</Subscript>]), and visualizing intermolecular interactions with Hirshfeld surface method

S-allyl-β-N-[(2-hydroxyphenyl)methylene]hyrazinecarbodithioate) (1, H₂L), the Schiff base of dithiocarbazate with unsaturated allyl substitution, can act as a new tridentate SNO ligand H₂–L and react with cobalt(II) nitrate hexahydrate to form the novel linear trinuclear isovalence Co(II) complex, [Co₃(H–L)₂(L)₂] 2C₂H₅OH (2). The compounds were characterized by elemental analysis, infrared, and ultraviolet spectroscopy. Compound 2 was also characterized by single-crystal X-ray analysis and crystallizes in the orthorhombic space group, Pbcn, with a = 30.643(1) Å, b = 9.118(4) Å, c = 19.017(7) Å, α = β = γ = 90°, V = 5312.95 Å³, Z = 4, and R ₁ = 0.0790, (wR ₂) = 0.1223. The six-coordinate central Co(II) atom is bonded to two deprotonated metal-containing ligands. The terminal Co(II) atoms are in a square planar SNON four-coordinate environment and connected to the central Co(II) by N-atoms from the ligand backbone. For quantifying the intermolecular interactions in crystal lattice, the new d _norm surface and the breakdown of fingerprint plots have been used for visualizing and exploring the compound 2.     

Use of the ionic liquid trioctylmethyl ammonium dodecanedioate as a corrosion inhibitor of steel in production water

The properties of trioctylmethyl ammonium dodecanedioate (TAD) as a corrosion inhibitor (CI) of API 5L X52 steel in production water (PW) were evaluated in steady state using weight loss and polarization techniques within a Reynolds number (N _Re ) interval ranging from 500 to 40,000. The highest obtained IE was 87 % at 100 ppm with N _Re  = 2500, whereas the lowest IE was 15 % at 10 ppm with N _Re  = 4000. TAD was classified as a mixed-type CI of API 5L X52 steel in PW. The \(\Delta G_{\text{ads}}^{^\circ }\) data established a relationship between the N _Re and the adsorption process, confirming the occurrence of physical adsorption phenomena.     

Synthesis,characterization, antimicrobial activity and ultrastructure of the affected bacteria of new quinoline compounds

The reaction on 8-hydroxy quinoline-7-aldehyde azo compounds (HL _n ) (where n = 1–5) with 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one to obtain HL _n (where n = 6–10) have been characterized by means of TLC, melting point and spectral data, such as IR, ¹H NMR, mass spectra and thermal studies. The X-ray diffraction patterns of two starting materials 8-hydroxy quinoline-7-aldehyde (start 1), 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one (start 2) and the ligands (HL_5,10) are investigated in powder form. All the ligands have been screened for their antimicrobial activity against four local bacterial species, two Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) as well as against four local fungi; Aspergillus niger, Alternaria alternata, Penicillium italicum and Fusarium oxysporium. The results show that the azo ligands (HL _n ) (where n = 1–5) have no antimicrobial activity against bacteria and fungi while most azomethine ligands (HL _n ) (where n = 6–10) are good antibacterial agents against E. coli and K. pneumoniae as well as antifungal agents against P. italicum and A. alternata. The results were compared to standard substances (start 1) and (start 2). Among the azomethine ligands, HL₁₀ was the most effective against the most microorganisms tested. The size of clear zone was ordered as p-(OCH₃ < CH₃ < H < Cl < NO₂) as expected from Hammett’s constant (σ ^R ). Also, the ultrastructure study of the affected bacteria confirmed that HL₈ is good antibacterial agent against E. coli and S. aureus.     

A comparison of energy changes accompanying growth processes by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Calculations are made using the equations Δ_r G = Δ_r H ? TΔ_r S and Δ_r X = Δ_r H ? Δ_r Q where Δ_r X represents the free energy change when the exchange of absorbed thermal energy with the environment is represented by Δ_r Q. The symbol Q has traditionally represented absorbed heat. However, here it is used specifically to represent the enthalpy listed in tabulations of thermodynamic properties as (H _T  ? H ₀) at T = 298.15 K, the reason being that for a given substance TS equals 2.0 Q for solid substances, with the difference being greater for liquids, and especially gases. Since Δ_r H can be measured, and is tangibly the same no matter what thermodynamics are used to describe a reaction equation, a change in the absorbed heat of a biochemical growth process system as represented by either Δ_r Q or TΔ_r S would be expected to result in a different calculated value for the free energy change. Calculations of changes in thermodynamic properties are made which accompany anabolism; the formation of anabolic, organic by-products; catabolism; metabolism; and their respective non-conservative reactions; for the growth of Saccharomyces cerevisiae using four growth process systems. The result is that there is only about a 1% difference in the average quantity of free energy conserved during growth using either Eq. 1 or 2. This is because although values of TΔ_r S and Δ_r Q can be markedly different when compared to one another, these differences are small when compared to the value for Δ_r G or Δ_r X.     

A one-dimensional silver(I) coordination polymer with saccharin and pyrazine: synthesis,crystal structure,thermal analysis,FTIR spectra,and DFT studies

A silver(I) complex of saccharinate (sac) with pyrazine (pyz), [Ag(sac)(pyz)] _n , has been synthesized and characterized by elemental analysis, IR, thermal analysis, and single-crystal X-ray diffractometry. The complex crystallizes orthorhombic space group Pnma with unit cell parameters of a = 13.0073(9) Å, b = 6.4907(6) Å, c = 13.4007(9) Å, V = 1131.37(15) Å³, and Z = 4. [Ag(sac)(pyz)] _n is a one-dimensional coordination polymer, in which the sac ligand acts as a monodentate ligand through the N atom and the trigonal silver centers are linked by the bridging pyz ligands. The individual chains are connected into two-dimensional supramolemular network by aromatic π(sac)···π(pyz) stacking interactions. The FTIR spectrum of [Ag(sac)(pyz)] _n has been recorded in the region and 4,000–400 cm^?1. The optimized geometry, frequency, and intensity of the vibrational bands of [Ag(sac)(pyz)] _n were obtained by density functional theory (DFT) at the B3LYP level. The vibrational frequencies were calculated and the scaled values have been compared with the experimental FTIR data. The observed and calculated frequencies are found to be in good agreement.     

Preparation,characterization and crystal structures of metal(II) tetraza macrocyclic complexes with organic co-ligands

The complexes [Ni(L1)(pyc)₂]·2H₂O (1) (L1 = C-meso-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane; Hpyc = pyrazinecarboxylic acid) and [Cu(L2)(H-cpdc)] (2) (L2 = 3,14-dimethyl-2,6,13,17-tetraazatricyclo[14,4,0^1.18,0^7.12]docosane; H₂-cpdc = cyclopropanedicarboxylic acid) have been synthesized and structurally characterized. The crystal structure of complex 1 shows a distorted octahedral coordination geometry around the nickel(II) center, with four secondary amines in the equatorial positions and two nitrogen atoms of the pyc^? ligands in the trans positions. In complex 2, the coordination environment around the copper(II) center is a Jahn–Teller distorted octahedron with four Cu–N bonds and two axial Cu–O bonds. The electronic spectra, electrochemical and TGA behavior of the complexes are significantly affected by the nature of the axial pyc^? and H-cpdc^? ligands.     

Structure,bioactivity and theoretical study of 1-cyano-<Emphasis Type="Italic">N</Emphasis>-p-tolylcyclo-propanecarboxamide

A novel cyclopropane derivative, 1-cyano-N-p-tolylcyclopropanecarboxamide (C₁₂H₁₂N₂O, Mr = 200.24) was synthesized and its structure was studied by X-ray diffraction, FTIR, ¹H and ¹³C NMR spectrum and MS. The crystals are monoclinic, space group P2_1/c with a = 7.109 (4), b = 13.758 (7), c = 11.505 (6) Å, α = 90.00, β = 102.731 (8), γ = 90.00 °, V = 1097.6 (9) ų, Z = 4, F(000) = 312, D _c  = 1.212 g/cm³, μ = 0.0800 mm^?1, the final R = 0.0490 and wR = 0.1480 for 1,375 observed reflections with I > 2σ(I). A total of 6,109 reflections were collected, of which 2,290 were independent (R _int = 0.0290). Theoretical calculation of the title compound was carried out with HF/6-31G (d,p), B3LYP/6-31G (d,p), MP2/6-31G (d,p). The full geometry optimization was carried out using 6-31G(d,p) basis set, and the frontier orbital energy. Atomic net charges were discussed, and the structure-activity relationship was also studied. The preliminary biological test showed that the synthesized compound is bioactive against the KARI of Escherichia coli.     

Synthesis,crystal structure and fungicidal activity of 1-(4-chlorophenyl)-2-(5-((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-4-phenyl-4H-1,2,4-triazol-3-ylthio)ethanone

A novel bis-heterocyclic compound was synthesized and characterized. The crystal structure of the title compound (C₂₂H₂₀ClN₅OS, Mr = 437.94) has been determined by single-crystal X-ray diffraction. The crystal is of triclinic, space group P-1 with a = 8.646 (2), b = 9.148 (3), c = 14.540 (4) Å, α = 94.422 (4), β = 98.500 (4), γ = 102.823 (4)°, V = 1101.8 (5) Å³, Z = 2, F(000) = 312, Dc = 1.320 g/cm³, μ = 0.2900 mm^?1, the final R ₁ = 0.041000 and wR ₂ = 0.1160 for 2675 observed reflections with I > 2σ(I). A total of 5623 reflections were collected, of which 3866 were independent (R _int = 0.019000). The fungicidal activity of title compound was determined, the results showed the title compound displayed moderate fungicidal activity against G. zeae Petch, Phytophthora infestans (Mont.) de Bary, Botryosphaeria berengeriana f. sp. piricola (Nose) koganezawa et Sakuma, Fusarium oxysporum f.sp. cucumerinum, and Cercospora arachidicola.     

Synthesis,crystal structure,and hydrogen-bonded displacive-type structural phase transition of guanidine dichloroacetate

Guanidine dichloroacetate was synthesized and separated as crystals. Differential scanning calorimetry (DSC) measurement shows that this compound undergoes a reversible phase transition at about 275 K with a heat hysteresis of 28 K. Step-like dielectric anomaly observed at 274 K further confirms the phase transition. The single-crystal X-ray diffraction data suggested that these was a transition from a room-temperature phase with the space group of P2₁/n (a = 8.030(5), b = 12.014(9), c = 8.124(6) Å, β = 96.089(1)°, V = 779.3(1) Å³, and Z = 4) to a low-temperature one with the space group of P2₁/c (a = 7.941(2), b = 11.828(3), c = 10.614(2) Å, β = 130.985(1)°, V = 752.6(3) Å³, and Z = 4). The displacements of hydrogen bonds induce the structure phase transition.     

Synthesis,Crystal Structure and Catalytic Property of a New Cadmium Coordination Polymer

A new cadmium coordination polymer [Cd(L)(Cl)(H₂O)]_n (1) (L = 5-(imidazol-1-yl)-2-pyridine carboxylic anion) constructed from dinuclear cadmium clusters has been synthesized under hydrothermal condition and structurally characterized by single-crystal X-ray diffraction analysis. The compound crystallizes in triclinic system, space group P-1, with a = 6.8747(6), b = 9.7434(8), c = 9.9119(7) Å, α = 118.615(8)°, β = 104.445(7)°, γ = 94.815(7)°, V = 548.01(9) ų, Z = 2. Compound 1 is a one-dimensional (1D) double chain structure based on dinuclear [Cd₂(Cl)₂] clusters, and is further extended to a 3D supramolecular framework by hydrogen bonds. As a Lewis acid catalyst, compound 1 exhibits excellent catalytic performance for the acetalization reaction under mild conditions and can be reused several times without a significant decrease of the catalytic activity.     

New hybrids of clozapine and haloperidol and their isosteric analogues: synthesis,X-ray crystallography,conformational analysis and preliminary pharmacological evaluation

Schizophrenia is a debilitating mental disorder which affects approximately 1% of the world’s population. Clozapine is an atypical antipsychotic showing unmatched effectiveness in the control of treatment-resistant schizophrenia. Unlike typical antipsychotics, clozapine does not induce extrapyramidal side effects (EPS), tardive dyskinesia or elevate prolactin levels. However, clozapine can induce a potentially fatal blood disorder, agranulocytosis, in 1–2% of patients, severely limiting its clinical use. The model for antipsychotic activity under investigation is based on obtaining a clozapine-like profile with preferential dopamine D₄ and serotonin 5-HT_2A receptor affinity. Profiled herein are three unique members of a series of prospective antipsychotic agents. Compound (I) originated from the structural hybridization of the commercial therapeutics, clozapine and haloperidol, whilst compounds (II) and (III) possess an alternative tricyclic nucleus derived from JL13; a clozapine-like atypical antipsychotic developed by Liégeois et al. These compounds have been synthesized and characterized by means of elemental analysis, IR, ¹H and ¹³C-NMR spectroscopy, MS and X-ray diffraction. Compound (I) crystallizes in space group P(?1) with a = 10.5032(1), b = 10.6261(2), c = 12.6214(3) Å, α = 81.432(1)°, β = 83.292(1)°, γ = 61.604(1)°, Z = 2, V = 1223.62(4) Å³, C₂₈H₂₉ClN₄O, M _r = 473.00, D _c = 1.284 Mg/m³, μ = 0.185 mm^?1, F(000) = 500, R = 0.0506 and wR = 0.1304. Compound (II) crystallizes in the monoclinic space group P2₁/c with a = 10.8212(2), b = 9.3592(2), c = 22.9494(5) Å, β = 106.471(1)°, Z = 4, V = 2228.88(8) Å³, C₂₅H₂₅ClN₄O₂, M _r = 448.94, D _c = 1.338 Mg/m³, μ = 0.202 mm^?1, F(000) = 944, R = 0.0529 and wR = 0.1129. Compound (III) crystallizes in the monoclinic space group P2₁/c with a = 10.5174(2), b = 9.3112(2), c = 24.2949(5) Å, β = 98.666(1)°, Z = 4, V = 2352.03(8) Å³, C₂₅H₂₄Cl₂N₄O₂, M _r = 483.38, D _c = 1.365 Mg/m³, μ = 0.306 mm^?1, F(000) = 1008, R = 0.0478 and wR = 0.1067. The solid state conformations of (I), (II) and (III) exhibit the characteristic V-shaped buckled nature of the respective dibenzodiazepine and pyridobenzoxazepine nuclei with the central seven-membered heterocycle in a boat conformation. The molecules of (I) form a head-to-tail dimeric motif stabilized by hydrogen bonding. The results of a conformational analysis of compounds (I)–(III) investigating the effect of environment (in vacuo and aqueous solution) are presented. These analogues were tested for in vitro affinity for the dopamine D₄ and serotonin 5-HT_2A receptors and their comparative receptor binding profiles to clozapine and JL13 are reported.     

Synthesis,structural phase transition,and characterization of potassium hydrogen bis-dichloroacetate

Potassium hydrogen bis-dichloroacetate (1) was synthesized and separated as crystals. Differential scanning calorimetry (DSC) measurement reveals that this compound undergoes a reversible phase transition at about 259 K with a heat hysteresis of 23.5 K. Dielectric anomaly observed at 260 K in the heating process further confirms the phase transition. The room temperature X-ray single-crystal structure determination indicates that 1 crystallizes in the monoclinic crystal system with a centrosymmetric space group P2₁/c, and cell parameters are a =?6.240(1), b =?23.177(4), c =?7.335(1) Å, β =?106.938(1)°, V =?1014.8(3) ų, and Z =?4. In the low temperature phase, 1 also crystallizes in monolinic with space group P2₁/c, and cell parameters are a =?6.180(1), b =?22.988(2), c =?7.200(1) Å, β =?108.098(1)°, V =?972.4(1) ų, and Z =?4. The structural phase transition is dominating caused by the torsion of bond angles.