Structure,charge ordering and physical properties of Yb<Subscript>2</Subscript>Fe<Subscript>3</Subscript>O<Subscript>7</Subscript>

The structural and physical properties of the layered Yb₂Fe₃O₇ have been extensively investigated. Transmission electron microscopy (TEM) observations at room temperature reveal the presence of diffuse zigzag-type streaks at 1/3(h h l) running along the c* axis direction, suggesting the presence of a charge ordered state with a shorter coherence length in comparison with that in Lu₂Fe₃O₇. The measurements of magnetization demonstrate that the replacement of Lu³⁺ by the magnetic Yb³⁺ ion in this layered system could result in visible effects on the low-temperature magnetic properties: the ferrimagnetic phase transition temperature decreases and an additional magnetic anomaly possibly attributed to antiferromagnetic coupling between Yb and Fe layers appears at around 50 K. Analysis of the dielectric properties shows that the Yb₂Fe₃O₇ material in general has a large dielectric constant of about 5000 at room temperature, and a broader relaxation time distribution in comparison with ErFe₂O₄.     

Temperature evolution of the dielectric response function of Pb(Fe<Subscript>0.95</Subscript>Sc<Subscript>0.05</Subscript>)<Subscript>2/3</Subscript>W<Subscript>1/3</Subscript>O<Subscript>3</Subscript> relaxor ceramics in a wide frequency range

Electrodynamic properties of Pb(Fe_0.95Sc_0.05)_2/3W_1/3O₃ solid solution belonging to A(B'B'')O₃ perovskite structural family have been investigated by broadband dielectric spectroscopy in a wave-number range of (4 × 10^–9–4 × 10³) cm^–1 and a temperature range of 100–600 K. The influence of low-frequency relaxations on the vibrational spectrum is determined within the four-parameter factorized dispersion model. Anomalies in the behavior of the dielectric response function are found near the temperature-diffuse maximum of permittivity.     

Microemulsion-mediated in-situ synthesis and magnetic characterization of polyaniline/Zn<Subscript>0.5</Subscript>Cu<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite

Polyaniline/Zn_0.5Cu_0.5Fe₂O₄ nanocomposite was synthesized by a simple, general and inexpensive in-situ polymerization method in w/o microemulsion. The effects of polyaniline coating on the magnetic properties of Zn_0.5Cu_0.5Fe₂O₄ nanoparticles were investigated. The structural, morphological and magnetic properties of as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, scanning electron microscopy (SEM) and magnetic measurements. The morphology analysis confirmed that polyaniline was deposited on the porous surface of magnetic Zn_0.5Cu_0.5Fe₂O₄. It was shown that the saturation magnetization and coercivity of Zn_0.5Cu_0.5Fe₂O₄ decreased after polyaniline coating, which can be interpreted by the interparticle dipole–dipole interactions that contributed to magnetic anisotropy and changed the magnetic properties of the nanoparticles. PACS  74.25.Ha; 81.05.-t; 81.05.Lg     

Phase transition in Bi<Subscript>8</Subscript>Fe<Subscript>6</Subscript>Ti<Subscript>3</Subscript>O<Subscript>27</Subscript> multiferroic ceramics

The polycrystalline Bi₈Fe₆Ti₃O₂₇ compound was prepared by a high-temperature solid-state reaction technique. Preliminary structural analysis by X-ray diffraction (XRD) confirms the formation of a single-phase compound in an orthorhombic crystal system at room temperature. The elemental content of the compound was analyzed by EDAX microanalysis. Microstructural analysis by scanning electron microscopy (SEM) shows that the compound has well defined grains, which are distributed uniformly throughout the surface of the pellet sample. Detailed studies of temperature-dependent dielectric response at various frequencies show dielectric anomalies at 380, 389 and 403°C for 10 kHz, 100 kHz, and 1 MHz respectively. The hysteresis loop observed by applying an electric field of 12 kV/cm on the poled sample with smaller remanent polarization supports the existence of ferroelectricity in this material. The value of d₃₃ of the compound was found to be 19 pC/N.      

Magnetic and dielectric properties of Mn<Subscript>0.2</Subscript>Ni<Subscript>0.8</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles synthesized by PEG-assisted hydrothermal method

We present a systematic investigation on the structural and magnetic properties of Mn_0.2Ni_0.8Fe₂O₄ nanoparticles synthesized by a polyethylene glycol (PEG)-assisted hydrothermal route. XRD, FT-IR, TEM and VSM were used for the structural, morphological, dielectric properties and magnetic investigation of the products, respectively. Average crystallite size of product was estimated using Line profile fitting as 6 ± 1 nm and particle size as 6.5 ± 1.0 nm from TEM micrographs. Magnetization measurements have shown that the particles have a blocking temperature of 134 K. Magnetization and the coercive field of the sample increase by decreasing the temperature. The conductivity measurements reveal the semiconducting behaviour for the sample. Temperature-dependent dielectric properties: dielectric permittivity (ε) and ac conductivity (σ_ac) for the sample were studied as a function of applied frequency in the range from 1 Hz to 3 MHz. These studies indicated that the dielectric dispersion curve for the sample showed usual dielectric dispersion which can be explained on the basis of Koop’s theory, which is based on the Maxwell–Wagner model for the interfacial polarization of homogeneous double structure.     

Fabrication,structure, and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C encapsulated with YVO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> composites

The use of carbon shells offers many advantages in surface coating or surface modification due to their surface with activated carboxyl and carbonyl groups. In this study, the Fe₃O₄@C@YVO₄:Eu³⁺ composites were prepared through a simple sol–gel process. Reactive carbon interlayer was introduced as a key component, which separates lanthanide-based luminescent component from the magnetite, more importantly, it effectively prevent oxidation of the Fe₃O₄ core during the whole preparation process. The morphology, structure, magnetic, and luminescent properties of the composites were characterized by transmission electron microscopy (TEM), high-resolution TEM, X-ray diffraction, X-ray photoelectron spectra, VSM, and photoluminescent spectrophotometer. As a result, the Fe₃O₄@C/YVO₄:Eu³⁺ composites with well-crystallized and core–shell structure were prepared and the YVO₄:Eu³⁺ luminescent layer decorating the Fe₃O₄@C core–shell microspheres are about 10 nm. In addition, the Fe₃O₄@C@YVO₄:Eu³⁺ composites have the excellent magnetic and luminescent properties, which allow them great potential for bioapplications such as magnetic bioseparation, magnetic resonance imaging, and drug/gene delivery.     

The enhanced catalytic degradation of SiO<Subscript>2</Subscript>/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/C@TiO<Subscript>2</Subscript> photo-Fenton system on p-nitrophenol

Heterogeneous photo-Fenton SiO₂/Fe₃O₄/C@TiO₂ (SFCT) catalyst with a core-multishell structure and a diameter of about 550 nm was successfully prepared and was characterized by scanning electron microscopy (SEM), TEM, XRD, Raman, and Fourier transform infrared (FT-IR). The results illustrated that anatase TiO₂ coexisted with rutile TiO₂, in which the anatase phase was the main crystal phase. In addition, the catalytic activity of SFCT catalyst had been evaluated in the catalytic degradation on p-nitrophenol (PNP). The influence factors on the PNP degradation, including SFCT component ratio (m _SFC/ m _TiO2), H₂O₂ dosage, solution pH, and PNP concentration, had been investigated. And the contrast experiments about the photo-Fenton catalytic mechanism revealed that the SFCT-2 catalyst possessed a superior activity in the neutral environment due to the optimal activity matching between Fe₃O₄ and TiO₂, and it exhibited the stable catalytic performance after five successive recycles. Therefore, the SFCT-2 catalyst had a promising application for the photo-Fenton degradation of organic contaminant.     

Magnetic properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> surface

The magnetic properties of the magnetite Fe₃O₄(110) surface have been studied by spin resolved Auger electron spectroscopy (SRAES). Experimental spin resolved Auger spectra are presented. The results of calculation of Auger lines polarization carried out on the basis of electronic state density are presented. Problems related to magnetic moments of bivalent (Fe²⁺) and trivalent (Fe³⁺) ions on the Fe₃O₄(110) surface are discussed. It is established that the deposition of a thin bismuth film on the surface results in significant growth of polarization of iron Auger peaks, which is due to additional spin-orbit scattering of electrons by bismuth atoms.     

Synthesis and studies of trisubstituted biphthalonitrile/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> magnetic hybrid microspheres

New trisubstituted biphthalonitrile/magnetite (TSB/Fe₃O₄) magnetic hybrid microspheres were synthesized from TSB and FeCl₃ · 6H₂O using the method of one-stage thermal temperature crystallization of solvents. The morphology and structure of magnetic hybrid microspheres were inspected using a scanning electron microscope, IR Fourier spectroscopy, and X-ray diffraction. It was found that the grown TSB/Fe₃O₄ magnetic hybrid microspheres represent spherical particles with an average size of ~137 nm and a small size spread. The size and size distribution of magnetic hybrid microspheres can be controlled by a small change in the ratio of TSB and Fe³⁺ ion contents in the microsphere. TSB/Fe₃O₄ hybrid microspheres exhibit a rather high saturation magnetization (58.16 emu g^–1) and new microwave electromagnetic properties, i.e., lower (in comparison with published) dielectric losses at low frequencies; magnetic losses are increased obviously due to an increase in the TSB content. Furthermore, it is detected that magnetic hybrid microspheres absorb microwaves, and strong reflection losses in a wide frequency range are established. The effective reflection loss of–31 dB is obtained in the microwave range from 2 to 16 GHz due to TSB content variations. Wide absorption properties of microwaves along with regular spherical shape and excellent magnetic properties offer wide opportunities for various applications of TSB/Fe₃O₄ magnetic hybrid microspheres as functional materials.     

Synthesis,characterization and magnetic properties of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanotubes

Well-aligned Co₃O₄ nanotubes were synthesized within the nanochannels of porous anodic alumina membranes using a single-source chemical vapor deposition method. Scanning electron microscopy and transmission electron microscopy showed that the Co₃O₄ nanotubes are highly ordered with uniform diameter in the range of 100–300 nm and length up to tens of microns. X-ray diffraction, the Raman spectrum, energy-dispersive spectroscopy and selected-area electron diffraction demonstrated that the nanotubes are composed of pure cubic phase polycrystalline Co₃O₄. Magnetic measurements using a SQUID magnetometer suggested the presence of a strong antiferromagnetic interaction with Weiss constant θ= -248 K. The real and imaginary parts of the ac susceptibility at f= 10 Hz had a maximum at 4.0 K, and the field dependence of the magnetization at 1.8 K showed a small hysteresis loop with a coercivity of ∼ 98 Oe. PACS 81.07.De; 81.15.Gh; 78.30.-j; 75.75.+a; 61.46.Np     

Effect of a magnetic field on the permittivity of 80%La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript>/20%GeO<Subscript>2</Subscript> composite

The dielectric properties of a magnetoresistive conducting two-phase 80%La_0.7Sr_0.3MnO₃/20%GeO₂ (wt %) composite have been studied near the percolation threshold in magnetic fields from 0 to 15 kOe at frequencies of the measurement field from 5 kHz to 1 MHz. The samples have inductive impedances; i.e., their permittivities can be considered negative due to a high conductivity in this frequency range. The permittivity increases in magnitude in magnetic field, and the values of the magnetodielectric coefficient reach 23% at room temperature. The reasons for the effect of magnetic field on the dielectric permittivity of samples are discussed.     

Polarization processes in BaBi<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript> and SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics in infralow-frequency fields

The dielectric nonlinearity in BaBi₂Nb₂O₉ and SrBi₂Ta₂O₉ layered ceramics was studied by measuring their polarization loops and reverse dependences of permittivity. It was shown that the features of the dielectric response of BaBi₂Nb₂O₉ and SrBi₂Ta₂O₉ in strong fields can be explained by glass-like properties and the contribution of the domain structure of the ferroelectric material to repolarization processes, respectively.     

Novel nanocomposite membranes based on polybenzimidazole and Fe<Subscript>2</Subscript>TiO<Subscript>5</Subscript> nanoparticles for proton exchange membrane fuel cells

In this work, Fe₂TiO₅ nanoparticles were used for improving the proton conductivity, and water and acid uptake of polybenzimidazole (PBI)-based proton exchange membranes. The nanocomposite membranes have been prepared using different amounts of Fe₂TiO₅ nanoparticles and dispersed into a PBI membrane with the solution-casting method. The prepared membranes were then physico-chemically and electrochemically characterized for use as electrolytes in high-temperature PEMFCs. The PBI/Fe₂TiO₅ membranes (PFT) showed a higher acid uptake and proton conductivity compared with the pure PBI membranes. The highest acid uptake (156 %) and proton conductivity (78 mS/cm at 180 °C) were observed for the PBI nanocomposite membranes containing 4 wt% of Fe₂TiO₅ nanoparticles (PFT₄). The PFT₄ composite membrane showed 380 mW/cm² power density and 760 mA/cm² current density in 0.5 V at 180 °C at dry condition. The above results indicated that the PFT₄ nanocomposite membranes could be utilized as proton exchange membranes for high-temperature fuel cells.     

Synthesis and electrocatalytic activities of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocubes

In this article, a hydrothermal method was developed to synthesize Co₃O₄ nanocubes using hydrogen peroxide (H₂O₂) as oxidant, Co(NO₃)₂·6H₂O as a cobalt source. The products are characterized in detail by multiform techniques including X-ray diffraction (XRD), energy dispersive X-ray analysis (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the obtained products are Co₃O₄ nanocubes with size ranging between 20 and 40 nm. The effects of the hydrogen peroxide concentration on the size of the products have been studied. The electrocatalytic activities of H₂O₂ reduction on Co₃O₄ nanocubes in phosphate buffer were also evaluated.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/functional exfoliation graphene on carbon paper nanocomposites for supercapacitor electrode

In this work, the commercial carbon paper was firstly peeled in K₂CO₃ solution and then was further treated in a KNO₃ solution to form functional exfoliation graphene (FEG) on the commercial carbon paper. The FEG/carbon paper was characterized by Raman spectra and scanning electron microscopy, confirming that some typical layered fold graphenes were successfully peeled off and stood on the carbon paper matrix. Then, Fe₃O₄ nanoparticles (NPs) were grown on the surface of FEG/carbon paper and the as-prepared Fe₃O₄ NPs/FEG/carbon paper was directly used as supercapacitor electrode. The specific capacitance of Fe₃O₄ NPs/FEG/carbon paper was about 316.07 F g^?1 at a current density of 1 A g^?1. Furthermore, the FEG/carbon papers were also functionalized by benzene carboxylic acid to form FFEG/carbon papers, and then the Fe₃O₄ NPs were grown on the surface of FFEG/carbon paper. The specific capacitance of Fe₃O₄ NPs/FFEG/carbon paper was 470 F g^?1 at a current density of 1 A g^?1, superior to some previous reported results. This work might provide a new strategy to prepare various nanostructures on FFEG/carbon papers for future applications.     

Electrical properties of Sr<Subscript>3</Subscript>Bi<Subscript>4</Subscript>Ti<Subscript>6</Subscript>O<Subscript>21</Subscript> thin films

Highly c-axis-oriented Sr₃Bi₄Ti₆O₂₁ (SBTi) thin films were fabricated on Pt-coated Si substrates by pulsed laser deposition (PLD). The structures were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). No peaks of SrTiO₃ (STO) could be detected in the XRD pattern, indicating the existence of the SBTi single phase. Good ferroelectric hysteresis loops of the films with Pt electrodes were obtained. With an applied field of 400 kV/cm, the measured remanent polarization (P_r) and coercive field (E_c) values were 4.1 C/cm² and 75 kV/cm respectively. The films showed little fatigue after 2.22×10⁹ switching cycles: the nonvolatile polarizations decreased by less than 5% of the initial values. The dielectric constant and the loss tangent of the films were measured to be 363 and 0.04 at 100 kHz. These results might be advantageous for nonvolatile ferroelectric random access memory (NVFRAM) and dynamic random access memory (DRAM). PACS 77.84.Dy; 77.22.-d; 68.55.Jk     

Structural Aspects of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Magnetic Nanoparticles According to X-Ray and Neutron Scattering

Structural aspects of powders containing magnetic nanoparticles Fe₃O₄/CoFe₂O₄ with the anticipated “core-shell” structure are considered by means of comparative analysis with individual particles of Fe₃O₄, CoFe₂O₄ in accordance of data obtained from X-ray powder diffraction and small-angle scattering of X-ray (synchrotron) radiation and neutrons. It is shown that magnetic particles in the powders under study have a strong polydispersity and form complex aggregates. Characteristic sizes of the crystallites, as well as a ratio of magnetite to cobalt-ferrite in the composition of the Fe₃O₄/CoFe₂O₄ particles were evaluated from the analysis of the diffraction peaks. Аnalyzing the data on small-angle scattering, the dimensional characteristics of particles and aggregates, as well as the volume fraction of the last ones in the powders, have been obtained. Fractal dimensions of aggregates are determined. A significant difference is observed in the scattering on Fe₃O₄/CoFe₂O₄ particles and the total scattering consisting of partial contributions to scattering on individual magnetite (Fe₃O₄) and cobalt-ferrite (CoFe₂O₄) powders, which does not exclude the formation of the “core-shell” structure.     

Dielectric relaxation of Cr<Superscript>3+</Superscript>-Li<Superscript>+</Superscript> pair centers in Li<Subscript>2</Subscript>Ge<Subscript>7</Subscript>O<Subscript>15</Subscript> crystals

The temperature-frequency dependences of the permittivity of crystals of lithium heptagermanate Li₂Ge₇O₁₅ doped with Cr³⁺ ions are investigated. A dielectric response to reorientation of the dipole moments of the chromium impurity centers is revealed. Anomalies of the permittivity are described within the model of a Debye relaxator.     

Ferroelectric and dielectric properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> thin films grown on Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> film layer

Ferroelectric and dielectric properties of bilayered ferroelectric thin films, SrBi₄Ti₄O₁₅ grown on Bi₄Ti₃O₁₂, were investigated. The thin films were annealed at 700°C under oxygen atmosphere. The bilayered thin films were prepared on a Pt(111)/Ti/SiO₂/Si substrate by a chemical solution deposition method. The dielectric constant and dielectric loss of the bilayered thin films were 645 and 0.09, respectively, at 100 kHz. The value of remnant polarization (2P _r) measured from the ferroelectric thin film capacitors was 60.5 μC/cm² at electric field of 200 kV/cm. The remnant polarization was reduced by 22% of the initial value after 10¹⁰ switching cycles. The results showed that the ferroelectric and dielectric properties of the SrBi₄Ti₄O₁₅ on Bi₄Ti₃O₁₂ ferroelectric thin films were better than those of the SrBi₄Ti₄O₁₅ grown on a Pt-coated Si substrate suggesting that the improved properties may be due to the different nucleation and growth kinetics of SrBi₄Ti₄O₁₅ on the c-axis-oriented Bi₄Ti₃O₁₂ layer or on the Pt-coated Si substrate.     

Dielectric dispersion and magnetic properties of Ba-modified Pb(Fe<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>)O<Subscript>3</Subscript>

The polycrystalline samples of Ba-modified Pb(Fe_1/2Nb_1/2)O₃ (i.e., (Pb_1-xBa_x)(Fe_1/2Nb_1/2)O₃ PBFN, with x=0,0.05,0.07) were synthesized by a mechanosynthesis (i.e., high-energy ball milling) route followed by a mixed oxide method. Structural analysis provides the information on formation of single-phase orthorhombic structure on substitution of a small amount (x=0.07) of Ba at the Pb-site of Pb(Fe_0.50Nb_0.50)O₃ (PFN). The ferroelectric–paraelectric phase transition in PFN was observed at 383 K, which decreases on increasing Ba-concentration in PBFN. Detailed studies of dielectric properties of PBFW show the following: (i) diffuse phase transition, (ii) low loss tangent, (iii) low activation energy, and (iv) low frequency dielectric dispersion. An anomaly in the ac conductivity was found very close to phase transition temperature. The activation energy is found to decrease from 0.19 to 0.01 eV on increasing Ba-concentration to 7% (x=0.07). Temperature field-dependent magnetization measurements of all the samples showed antiferromagnetic transition at ∼15 K (for x=0.07). PBFN sample showed a slight increase in the coercivity (i.e., from 400 Oe (PFN) to 500 Oe (PBFN, for x=0.07) at 2 K. PACS 61.10.Nz; 68.37.Hk; 75.50.Ss; 75.60.Ej; 77.22.Ch; 77.22.Gm