3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

Synthesis and dynamics of atropisomeric (S)-N-(α-phenylethyl)benzamides

The synthesis of atropisomeric 2-substituted benzamides 2a-e, 3a-e, and 4a-e, and characterization by X-ray structure analysis of 2d, 2e, 3c, 3e, 4c, and 4e are reported. Dynamic ¹H NMR spectroscopic studies of benzamides 2b-d, 3b-d, and 4b-d indicate that only two of the four possible rotamers are present in solution, with population ratios ranging between 1.5:1 and 4.1:1. The measured free energy of activation to interconversion of the rotamers ranged from 12.4 to 18.9 kcal mol⁻¹. Benzamides ArCON[(S)-phenethyl]₂ (2e, 3e, and 4e), exhibited atropisomer ratios between 1.7:1 and 1:1, and free energies of interconversion of the rotamers ranged from 11.5 to 17.6 kcal mol⁻¹. The highest rotation barriers were observed for the ortho-nitro derivatives 2a-e. Molecular calculations at the semiempirical level (PM3MM) gave free energies of activation for benzamides 2e and 3e of 23.6 and 12.4 kcal mol⁻¹, respectively, which are comparable to the experimental values.     

A new approach to 2,2-disubstituted 1-(methylsulfanyl)vinyl phosphonates via an intermediate thiocarbonyl ylide

The reaction of methyl (diethylphosphoryl)dithioformate (6) with diaryldiazomethanes 7a-d in THF at −60 °C to room temperature followed by desulfurization is shown to be a convenient method for the preparation of 2,2-disubstituted 1-(methylsulfanyl)vinyl phosphonates 8a-d. The analogous reactions with 2-diazoacenaphthen-1-one (7f) or 2-diazocamphor (7g) in refluxing THF yield selectively the corresponding (Z)- and (E)-vinyl phosphonates 8f and 8g, respectively. These products can be easily oxidized to the vinylsulfoxides 13 and vinylsulfones 14. On the other hand, methyl (diethylphosphoryl)dithioformate (6) and 2-diazo-1,2-diphenylethanone (7e) in boiling THF react to give the 1,3-oxathiole 12. All these reactions occur via an intermediate thiocarbonyl ylide 11 followed by 1,3-dipolar electrocyclization and sulfur extrusion or 1,5-dipolar electrocyclization.     

A general method for the synthesis of the most powerful naturally occurring Maillard flavors

The natural flavors 2-acetyl-1-pyrroline 1a, 2-propionyl-1-pyrroline 1b, 2-acetyl-3,4,5,6-tetrahydropyridine 1c, 2-acetyl-2-thiazoline 1d, 2-propionyl-2-thiazoline 1e, and the artificial flavor 2-acetyl-5,6-dihydro-4H-1,3-thiazine 1f have been prepared by catalytic SeO₂ oxidation of the corresponding cyclic imines 6a-c and sulfur cyclic imines 7a-c using TBHP as co-oxidant. The oxidation of the pyrrolines 1a and b is completely regioselective. Professional olfactory evaluation together with the odor threshold of the new flavor 1f is reported.     

New synthesis of 2-trifluoromethyl-2,3-dihydro-1H-quinolin-4-ones

N-(1-Ethoxy-2,2,2-trifluoroethyl)anilines 2a-2f, prepared from trifluoroacetaldehyde ethyl hemiacetal and aniline, readily reacted with diethyl malonate in the presence of sodium hydride, giving substituted products 5a-5f in high yields. Compounds 5a-5f subjected to hydrolysis and decarboxylation under specified conditions yielded the 4,4,4-trifluorobutyric acids 6a-6e or 7. Direct ring-closure of 6a-6e with polyphosphoric acid gave 2-trifluoromethyl-2,3-dihydro-1H-quinolin-4-ones 9a-9e.     

Electrochemical synthesis of 1,3,4-thiadiazol-2-ylthio-substituted catechols in aqueous medium

Anodic oxidation of catechols 1a-e in the presence of 5-methyl-2-mercapto-1,3,4-thiadiazole 2 has been studied in acetate buffer solution by cyclic voltammetry and controlled-potential electrolysis techniques. The effects of various electrolytic conditions (amount of passed charge, anodic materials, pH of the electrolytic solution, applied potential, and concentration of substrates) on the yield have also been investigated. The results showed that the position of the initial substituent of the starting catechol derivatives dominated the formation of monothiadiazol-2-ylthio-substituted or/and dithiadiazol-2-ylthio-substituted products. For 4-substituted catechols 1a-b, monothiadiazol-2-ylthio-substituted products (3a-b) were exclusively produced in high to excellent yields. However, in the cases of catechol itself (1c) and 3-substituted catechols (1d-e), both monothiadiazol-2-yl-substituted (3c-e and 5d-e) and dithiadiazol-2-ylthio-substituted products (4c-e) were isolated. In addition, the nature of the initial substituent of the starting 3-substituted catechols (1d and 1e) affected the relative ratio of the two monothiadiazol-2-ylthio-substituted isomers (3d-e vs 5d-e).     

Imino Diels-Alder reaction of boronates. Preparation and characterization of new 3,4-dihydroquinoline and 1,2,3,6-tetrahydropyridine derivatives

The preparation of 3,4-dihydroquinolines (2a-d and 3a,b,d), as well as 1,2,3,6-tetrahydropyridines (4a-e) by imino Diels-Alder reaction of boronates (1a-e) with 2,3-dimethylbutadiene is reported. Boronates (1a-d) containing substituents meta and para relative to the imino fragment lead to diastereomeric mixtures of 4-methyl-4-ethenyl-3,4-dihydroquinolines (2, 3) and tetrahydropyridines (4). In contrast, the presence of an electron withdrawing substituent at the para position (1e), favors the iminodienophile behavior giving 4,5-dimethyl-1,2,3,6-tetrahydropyridine (4e) as the main product. The results show that boronates derived from Schiff bases are electron deficient species which can act either as dienophiles or dienes in the reaction with 2,3-dimethylbutadiene to give 3,4-dihydroquinolines and 1,2,3,6-tetrahydropyridines. All products were characterized by NMR and X-ray diffraction analysis of 2b, 2d, 3d and 4c allowed to assign the relative configuration of the newly formed stereogenic centers.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

A Pd[0]-catalyzed Ullmann cross-coupling/reductive cyclization approach to C-3 mono-alkylated oxindoles and related compounds

The Pd[0]-catalyzed Ullmann cross-coupling of o-nitrohaloarenes 1a-e with the brominated heterocycles 2a-f delivers the expected products 3a-j in good to excellent yields. The reductive cyclization of such products, as well as N-acyl derivatives 3k, l, and m, has been investigated and provided the C-3 mono-substituted oxindoles 5a-d, f, g, k, and m, the direct reduction products 4i and j or indole 5l.     

A clay-mediated, regioselective synthesis of 2-(aryl/alkyl)amino-thiazolo[4,5-c]carbazoles

The 3-aminocarbazoles 1a-e were condensed with phenyl and benzyl isothiocyanates on montmorillonite K10 clay or TLC-grade silica gel at room temperature to furnish efficiently the N-phenyl and N-benzylthioureidocarbazoles, 2a-e and 2f, respectively, within minutes. When adsorbed on montmorillonite K10 clay impregnated with para-toluene sulfonic acid (1:1, w/w) and heated at 60-70 °C, 2a-e and 2f furnished the 2-anilino and 2-benzylaminothiazolo[4,5-c]carbazoles, 3a-e and 3f, respectively, regioselectively in high yields. The cyclisation was also effective for the N-methylthioureidocarbazoles 2g-i.     

Novel β-lactam condensed 3-thiaquinolines: an efficient synthesis and structural characterization

Quinoline analog 2-aryl-4H-3,1-benzothiazine derivatives 8-13, obtained by the condensation of o-aminobenzyl chloride 1 with substituted thiobenzamides 2-7, were transformed to azeto[2,1-a][3,1]benzothiazin-1-one derivatives 18-23a,b,c and 24d,e by reaction with the corresponding substituted acetyl chlorides 14-17 in the presence of triethylamine. The structures of the new molecules were determined by NMR spectroscopy and electron ionization (EI) mass spectrometry. The typical EI⁺ mass spectrometric fragmentations of 8-13 and 18-23a,b,c and 24d,e are discussed in detail.     

Rapid syntheses of (±)-pterocarpans and isoflavones via the gold-catalyzed annulation of aldehydes and alkynes

(±)-Pterocarpan and analogues (4a-c) have been synthesized efficiently via the annulation of salicylaldehydes (1a, 1b and 1c) and o-methoxymethoxylphenylacetylene (2a), followed by a one-pot reduction and acidic cyclization of the ketones (3a-c). In addition, isoflavone derivatives (5a-c) have been synthesized rapidly, in two steps, via the annulation of salicylaldehyde (1a) and arylacetylenes (2b, 2c and 2d), followed by IBX/DMSO oxidation of the isoflavanones (3d, 3e and 3f).     

Gas-phase pyrolysis of benzimidazole derivatives: novel route to condensed heterocycles

Gas-phase pyrolysis of N-(1H-benzimidazol-2-yl)-N′-arylidenehydrazines 1a-e gave the corresponding arylnitriles 2a-e, 2-aminobenzimidazole 3, 2,4,5-triphenylimidazole 4, 1,3-diphenyl-8H-2,3a,8-triazacyclopenta[a]indene 5, and 5,11-diphenyl-6H,12H-dibenzimidazo[1,2-a];1’,2’-d]pyrazine 6. The kinetics and analysis of the products of reaction are reported and used to elucidate the mechanism of the elimination process.     

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximides with alkynes

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximide 1 with phenylacetylenes 2a-2c, cyclopropylacetylene 2d, diphenylacetylenes 2e-2f and 1-phenylpropyne 2g were investigated. In the case of phenylacetylenes 2a, 2b and cyclopropylacetylene 2c, photoreaction with 1 takes place at the naphthalene C(1)C(2) bond to give the cyclobutene products. For 4-methoxyphenylacetylene 1c, the cyclobutene 3c is obtained together with the 4-benzo[a]thebenidinone 4c derived from a primary oxetene product formed by [2+2] addition of the imide carbonyl with the alkyne. Similar to 2c, photocycloaddition of 1 with 2e and 2f gave the cyclobutenes 7e, 7f, 8f and the 4-benzo[a]thebenidinone products 9e, 9f and 10f, respectively, derived from the corresponding oxetenes. Photoreaction of 1 with 2g gave cyclobutene 7g and benzo[a]thebenidinone 9g. Sensitization experiment and internal heavy atom effect study showed that these reactions proceed from the ππ* singlet excited state of 1. Estimation of the free energy change for electron transfer between ¹1* and the alkynes and the calculation of charge and spin density distribution in the anion radical of 1 and the cation radical of the alkynes suggested that the cyclobutene products are formed by direct [2+2] cycloaddition of ¹1* with the alkyne, while the formation of the oxetene products is the result of electron transfer interaction between ¹1* and the alkyne. The regioselectivity in the oxetene formation is accounted for by charge and spin density distribution in the anion radical of 1 and the cation radical of the alkyne.     

Studies on isocyanides: synthesis of tetrazolyl-isoindolinones via tandem Ugi four-component condensation/intramolecular amidation

The Ugi four-component condensation between methyl o-formylbenzoates 1, anilines 2a-c, isocyanides 3, and trimethylsilyl azide (4) afforded the expected Ugi adducts 5a-d, which were cyclized to the title compounds 6a-d upon treatment with sodium ethoxide in ethanol. Starting from aralkyl- or alkylamines 2d-g the Ugi adducts underwent a spontaneous cyclization to tetrazolyl-isoindolinones 6e-j.     

Synthesis of arylated highly congested indans using a domino sequence

A novel and efficient regioselective synthesis of various arylated highly congested 7-aryl-5-methylsulfanylindan-4-carbonitriles (3a-f), methyl 7-aryl-5-methylsulfanylindan-4-carboxylates (10a-e) and 7-aryl-5-methylsulfanylindan-4-carboxylic acids (11a-e) through base-catalyzed reaction of 6-aryl-4-methylsulfanyl-2-oxo-2H-pyran-3-carbonitriles (1a-f) and methyl 6-aryl-4-methylsulfanyl-2-oxo-2H-pyran-3-carboxylates (9a-e) by cyclopentanone (2) has been delineated. The synthetic potential of 2-pyranone was explored further to generate molecular diversity using 6-aryl-4-sec-amino-2-oxo-2H-pyran-3-carbonitriles (7a-h), 5,6-diaryl-4-methylsulfanyl-2-oxo-2H-pyran-3-carbonitriles (5a,b) and methyl 5,6-diaryl-4-methylsulfanyl-2-oxo-2H-pyran-3-carboxylates (12a,b) as precursors for the ring transformation by cyclopentanone to assess the effects of substituents on the course of the reaction to obtain highly congested indans, 6,7-diaryl-5-methylsulfanylindan-4-carbonitriles (6a,b), 7-aryl-5-(piperidin-1-yl)indan-4-carbonitriles (8a-h) and methyl 6,7-diaryl-5-methylsulfanylindan-4-carboxylates (13a,b).     

Preference of di-n-butyltin compounds to build O?Sn bonds in fused rings with five-six members

The reaction of salicylaldehyde (1), o-aminophenols (2a-2f), and di-n-butyltin^IV oxide (3) to give six di-n-butyltin^IV compounds (4a-4f) was achieved in good yields. All compounds were characterized by ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn NMR, mass spectrometry, IR, elemental analysis and in the case of compounds 4a, 4b, 4d and 4e by X-ray diffraction analysis. Compound 4a crystallized with trigonal bipiramidal (TPB) geometry surrounding the tin atom while 4b and 4e crystallized as dimeric molecules joined by two O?Sn bonds with distorted octahedron (DOC) geometry. The X-ray structure of 4d presents one cocrystallized monomeric TBP with one dimeric DOC molecule. Correlations of σ_Hammett vs. spectroscopic values were found for 4a-4b and 4d-4f, indicating the substituents in the aromatic ring derived from o-aminophenol serve as modulators of the O?Sn supramolecular interaction. The O?Sn bond formation is selective for the five-membered ring oxygen atom.     

Efficient syntheses of thiadiazoline and thiadiazole derivatives by the cyclization of 3-aryl-4-formylsydnone thiosemicarbazones with acetic anhydride and ferric chloride

3-Aryl-4-formylsydnone 4′-phenylthiosemicarbazones 3a-d and 3-aryl-4-formylsydnone thiosemicarbazones 3e-h are effective precursors of sydnonyl-substituted heterocycles. The thiosemicarbazones 3a-d reacted with acetic anhydride (4a) to give 4-acetyl-2-phenylamino-5-(3-arylsydnon-4-yl)-4,5-dihydro-[1,3,4]thiadiazoles 5a-d and 4-acetyl-2-(N-phenylacetamido)-5-(3-arylsydnon-4-yl)-4,5-dihydro-[1,3,4]thiadiazoles 6a-d. However, under similar method, thiosemicarbazones 3e-h produced only 4-acetyl-2-acetamido-5-(3-arylsydnon-4-yl)-4,5-dihydro-[1,3,4]thiadiazoles 6e-h in high yield. The sydnonyl-substituted thiadiazole derivatives 7a-h were also obtained successfully by the cyclization of 3-aryl-4-formylsydnone thiosemicarbazones 3a-h with ferric chloride (4b). In the cyclization, the thiosemicarbazones 3a-d are more reactive than the thiosemicarbazones 3e-h.     

Synthesis of poly-substituted pyrroles starting from the Baylis-Hillman adducts

We synthesized poly-substituted pyrrole derivatives 4a-e, 7a-c and 10a-d from the reaction of phenacyl bromide and the aza-Baylis-Hillman adducts 1a-d or their rearranged derivatives 5a-e. The pyrroles were synthesized via the successive N-alkylation, Michael addition, elimination of p-toluenesulfinic acid and oxidative aromatization processes.     

Phosphorus-nitrogen compounds part 22. Syntheses, structural investigations, biological activities and DNA interactions of new mono and bis (4-fluorobenzyl) spirocyclophosphazenes

The reactions of hexachlorocyclotriphosphazene, N₃P₃Cl₆, with mono (1 and 2) and bis(4-fluorobenzyl) diamines (3-5), FPhCH₂NH(CH₂)_nNHR (RH or FPhCH₂-), produce mono (1a and 2a) and bis(4-fluorobenzyl) monospirocyclophosphazenes (3a-5a). The tetraaminomonospirocyclophosphazenes (1b-2d) are obtained from the reactions of the partly substituted phosphazenes (1a and 2a) with excess pyrrolidine, morpholine and 1,4-dioxa-8-azaspiro[4,5]decane (DASD), respectively. The tetrachlorobis(4-fluorobenzyl) monospirocyclophosphazenes (4a and 5a) with excess pyrrolidine, morpholine and DASD afford the fully substituted bis(4-fluorobenzyl) monospirocyclophosphazenes (4b, 4d-5d) in boiling THF. In addition, monochlorobis(4-fluorobenzyl) monospirocyclophosphazenes (4e and 4f) have also been isolated from the reactions with excess morpholine and DASD in boiling THF. The structural investigations of the compounds have been verified by elemental analyses, MS, FTIR, ¹H, ¹³C, ¹⁹F (for 1d and 2d), ³¹P NMR, HSQC and HMBC techniques. The crystal structures of 3a, 4a, 5a and 2b have been determined by X-ray crystallography. The compounds 2a-5a, 1b-2d, 4b, 4d-5d, 4e and 4f have been screened for antibacterial effects on bacteria and for antifungal activity against yeast strains. The compounds 1b and 4b showed antimicrobial activity against three species of bacteria, Bacillus subtilis, Bacillus cereus and Staphylococcus aureus, and two fungi, Candida albicans and Candida tropicalis. Minimum inhibitory concentrations (MIC) were determined for 1b and 4b. The MIC values were found to be 5000 μM for each bacteria. The most effective compound, 4b has exhibited activity with a MIC of 312 μM for C. albicans and 625 μM for C. tropicalis. DNA-binding and the nature of the interaction with pBR322 plasmid DNA are studied. All of the compounds induce changes on the DNA mobility and intensity. Prevention of HindIII digestion with the compounds indicates that the compounds bind with AT nucleotides in DNA.