A study of cryostructuring of polymer systems. 46. physicochemical properties and microstructure of poly(vinyl alcohol) cryogels formed from polymer solutions in mixtures of dimethyl sulfoxide with low-molecular-mass alcohols

Poly(vinyl alcohol) (PVA) cryogels (PVACGs) are obtained and studied. The PVACGs are formed by freezing–defrosting of polymer solutions in dimethyl sulfoxide (DMSO) or its mixtures with one of the first members of the series low-molecular-mass aliphatic alcohols (methanol, ethanol, n-propanol, and n-butanol). PVA content in these solutions is 100 g/L, while the concentration of an aliphatic alcohol is varied in a range of 0.44–2.55 mol/L depending on its nature. The polymer solutions are subjected to the cryogenic treatment at temperatures 30, 40, or 50°C lower than the crystallization temperature of DMSO (+18.4°C). The frozen samples are defrosted at a heating rate of 0.03°C/min. It is shown that, in a certain range of lowmolecular-mass alcohol content in an initial system, its cryogenic treatment yields coarse-pored heterophase cryogels that have higher rigidity and heat endurance than those of DMSO–PVA cryogels. It has been shown that polymer cryoconcentration and phase separation play important roles in the formation of a cellular microstructure and an increase in the rigidity and heat endurance of PVACGs obtained in the presence of low-molecular-mass alcohols.     

A study of cryostructuring of polymer systems. 45. Effect of porosity of dispersed filler on physicochemical characteristics of composite poly(vinyl alcohol) cryogels

Composite cryogels simulating the properties of waterproof screens of hydraulic structures, such as protruding dykes and dams, have been obtained by a cryogenic treatment (freezing at –10…–30°C followed by incubation in the frozen state for 12 h and defrosting at a rate of 0.03°C/min) of suspensions of calcium-carbonate-containing (marble or coquina) or cellulose-containing (microcrystalline cellulose or sawdust) particles in aqueous poly(vinyl alcohol) solutions. Viscometric examinations of initial suspensions have shown that adhesion contacts arise between filler particles, as well as discrete and continuous phases, already at the stage of suspension preparation, thereby affecting the properties of resulting cryogels. This is most pronounced when high-porosity sawdust is used as a filler. It has been shown that all the dispersed materials used in the work are “active” fillers for poly(vinyl alcohol) cryogels, these fillers increasing the rigidity of the formed composites. Therewith, porous particles, into which the polymer solution can penetrate, are more efficient. The dependence of the composite rigidity on the temperature of the cryogenic treatment has, as a rule, a bell-shaped pattern with a maximum in the region of –20°C. Being tested for water permeability, the obtained model composite cryogels have exhibited pronounced antifiltration properties (the filtration coefficient is ≤(1–2) × 10^–9 cm/s), thus indicating that such materials are promising for solving problems relevant to the protection of fascine hydraulic structures from erosion with snow water.     

A Study of cryostructuring of polymer systems. 41. Complex and composite poly(vinyl alcohol) cryogels containing soluble and insoluble forms of chitosan,respectively

Complex macroporous poly(vinyl alcohol) (PVA) cryogels have been obtained by cryogenic treatment (freezing at–20°C for 12 h followed by defrosting at a rate of 0.03°C/min) of PVA–chitosan hydrochloride mixed solutions. The subsequent alkaline treatment of the cryogels has resulted in the transformation of the water-soluble salt form of chitosan into its insoluble basic form, which coagulates inside the bulk of the continuous phase of PVA cryogel into small particles with sizes of 2–5 µm. In the resulting composite cryogels, these particles play the role of an “active” filler, which increases the rigidity and heat endurance of the gel material. It has been shown that the sorption capacity of such chitosan particles entrapped into the bulk of composite cryogels with respect of bivalent copper ions is noticeably higher than the sorption capacity of ground chitosan particles incorporated as a discrete filler into the continuous phase PVA cryogels. The study of the properties of PVA–chitosan hydrochloride mixed solutions revealed that these polymers are, to a large extent, compatible with one another in a common solvent at a low ionic strength. Therefore, liquidliquid phase separation of these systems due to the thermodynamic incompatibility of macromolecules of different natures is observed only upon increasing the ionic strength by adding a low-molecular-mass salt (NaCl, 0.15 mol/L) to the solution.     

A study of cryostructuring of polymer systems. 34. Poly(vinyl alcohol) composite cryogels filled with microparticles of polymer dispersion

Macroporous filled and unfilled poly(vinyl alcohol) (PVA) cryogels are produced by cryogenic treatment (freezing at ?20°C for 12 h followed by thawing at a rate of 0.03°C/min) of mixtures of an aqueous PVA solution and a full-component poly(vinyl acetate) (PVAc) dispersion or its individual components. The values of the elasticity modulus and fusion temperature are determined for obtained samples; their microstructure is studied by light microscopy of thin sections. It is shown that the effects that are induced by the incorporation of PVAc dispersion into the macroporous matrix of the PVA cryogel are due to the presence of both a discrete phase, i.e., solid PVAc microparticles, and ingredients of the liquid phase of the PVAc dispersion, mainly, urea. Therewith, the dispersed particles themselves serve as a reinforcing filler, i.e., increase the rigidity and (to a lesser extent) heat endurance of the cryogel, while urea, which possesses chaotropic properties and hinders the intermolecular hydrogen bonding of PVA chains, reduces the rigidity and heat endurance of the composites. As a result, the total effect is determined by the competition of differently directed influences of these components of PVAc dispersion and depends on its concentration in the resulting filled cryogel. It is also shown that PVAc microparticles are mainly entrapped in the gel phase of the macroporous matrix and form necklacelike aggregates, the cross-sectional areas and lengths of which depend on the degree of composite filling.     

Study of cryostructuring of polymer systems. 33. Effect of rate of chilling aqueous poly(vinyl alcohol) solutions during their freezing on physicochemical properties and porous structure of resulting cryogels

Poly(vinyl alcohol) cryogels are obtained and investigated. The cryogels are prepared by freezing an initial polymer solution (100 g/L) at chilling rates of 1.85, 0.3, 0.03, or 0.003°C/min followed by defrosting the frozen (?20°C/12 h) preparations at heating rates of 0.3, 0.03, or 0.003°C/min. It is shown that a noticeable influence of the chilling rate on the rigidity and heat endurance of the gel matrix is observed at very slow regimes of chilling (on the order of thousandths of degree centigrade per minute). One of the reasons for a reduction in the rigidity of resulting cryogels and the fusion enthalpy of the nodes in their supramolecular networks is the formation of a homo-phase hydrogel during the long-term exposure of the concentrated polymer solution to low temperatures prior to the onset of ice crystallization. The effect of the regime of chilling the polymer solution being frozen on the porous structure of cryogels resulting from the thawing of the preparations is ambiguous due to the multifactor character of this effect; therefore, in many cases, well-defined structure-property correlations are not observed.     

Study of Cryostructuring of Polymer Systems: 23. Composite Poly(vinyl alcohol) Cryogels Filled with Dispersed Particles Containing Ionogenic Groups

Composite poly(vinyl alcohol) cryogels containing particles of cross-linked dextran gels (Sephadexes and their ion-exchange derivatives with different ionogenic groups) as fillers were prepared and studied. It was shown that mechanical and thermal-physical properties of such composites were affected by the presence of ionogenic groups on the particles of dispersed fillers: as the ionite concentration increases, less rigid (than in the case of unmodified Sephadex particles) filled cryogels were formed. The properties of composite cryogels depend on the nature and concentration of counterion added with the ionite. Substantial increase in the rigidity and melting point of composites was observed when using strong anionites in the OH^–-form and strong cationites in the H⁺-form as fillers.     

Study of cryostructuring of polymer systems: 27. Physicochemical properties of poly(vinyl alcohol) cryogels and specific features of their macroporous morphology

Based on aqueous poly(vinyl alcohol) (PVA) solutions with different content of polymer having different molecular masses and chain tacticity, macroporous viscoelastic gels (PVA cryogels) are prepared in various regimes of freezing-storage in a frozen state-thawing. Shear modulus and fusion temperature of corresponding samples are measured; the structure of thin sections is studied by optical microscopy and the images are processed and analyzed. It is shown that the rigidity and heat endurance of cryogels rise with an increase in the concentration of initial PVA solution and a decrease in the rate of thawing. The influence of the temperature of cryogenic treatment and the PVA molecular mass has an extreme character. At the same time, the effect of the main parameters of cryotropic gelation on the macroporous morphology of PVA cryogels is manifested in the form of more complex dependences because of its multiple-factor character. Therefore, distinct structure-property correlations are not observed in many cases. Cluster analysis of the morphometric characteristics of cryogels in comparison with data on their rigidity makes it possible to classify these systems.     

Study of cryostructuring of polymer systems: 31. Effect of additives of alkali metal chlorides on physicochemical properties and morphology of poly(vinyl alcohol) cryogels

Macroporous viscoelastic poly(vinyl alcohol) (PVA) cryogels were prepared from aqueous PVA solutions containing additives (0–1.2 mol/l) of alkali metal chlorides (LiCl, NaCl, KCl, CsCl) by cryogenic treatment (freezing at −20°C for 12 h and subsequent thawing at a rate of 0.03°C/min). Shear moduli and fusion temperatures of corresponding samples were determined and the structure of thin sections was studied by optical microscopy with subsequent processing and analysis of images obtained. It was shown that the rigidity, heat endurance, and mean pore sizes of formed cryogels monotonically decrease with increasing content of chaotropic lithium chloride. In the case of other three salts, the dependences of rheological characteristics of cryogels on the concentration of low-molecular-weight electrolyte were extreme due to the competition between factors that promote and prevent PVA cryotropic gelation. At the same time, fusion temperatures of gel samples increased steadily with increasing content of these salts. Microscopic studies revealed substantial (by factor of two to three) decrease in macropore sizes even at low content of salt compared to mean cross sections of pores in cryogel containing no additive; morphometric analysis of obtained images makes it possible to reveal the linear correlations between the rheological characteristics of cryogels formed in the presence of LiCl and the sizes of their macropores.     

Study of Cryostructuring of Polymer Systems: 25. The Influence of Surfactants on the Properties and Structure of Gas-Filled (Foamed) Poly(vinyl alcohol) Cryogels

Foamed poly(vinyl alcohol) (PVA) cryogels are studied. Such heterogeneous gel composites are formed as a result of the cryogenic treatment (freezing—storage in a frozen state—thawing) of water— PVA liquid foams in the absence and presence of surfactants. It is shown that the addition of ionic and nonionic surfactants to an aqueous PVA solution and its subsequent foaming result in the formation of liquid foam whose stability is lower than that of the foam prepared from an aqueous PVA solution in the absence of surfactant, i.e., surfactants cause a destabilizing effect on the foams containing PVA. Gas-filled PVA cryogels formed as a result of freezing—thawing of such foams contain large (up to ～180 μm) pores (air bubbles incorporated into the matrix of heterogeneous gel). Mechanical and thermal properties of cryogels depend on the nature and concentration of surfactants, as well as on the regime of cryogenic treatment. The rigidity of foamed PVA cryogels prepared in the presence of sodium dodecyl sulfate and cetyltrimethylammonium bromide ionic surfactants is lower and that in the presence of nonionic decaoxyethylene cetyl ether is higher than for equiconcentrated (by the polymer) foamed PVA cryogel containing no surfactant. Microscopic studies and the analysis of obtained images of cryogel structure demonstrate that the effect of surfactant on the morphology of freezing foam can be different, depending on the type of surfactant added to the initial system. This leads to foam-destabilizing effects such as the collapse, deformation, and coalescence of air bubbles; the failure of gel phase structure near the bubble surface; etc. However, the complete disintegration of the foamed structure is prevented by a very high viscosity of the unfrozen liquid microphase of a macroscopically solid sample and by the cryotropic PVA gelation that fixes the structure of partially destroyed foam.     

Specific features of the polyelectrolyte behavior of weakly charged cryogels of polyacrylamide and poly(N-isopropylacrylamide)

Specific features of the polyelectrolyte behavior of weakly charged common gels and cryogels of copolymers of polyacrylamide and poly(N-isopropylacrylamide) with sodium acrylamido-2-methyl-1-propyl sulfonate are investigated. The cryogels are synthesized in frozen solutions at ?15°C. It is shown that the polyelectrolyte swelling is significantly weaker in the case of cryogels than that in the case of gels synthesized in solutions. For thermosensitive gels with isopropylacrylamide groups, collapse occurs during heating. Charging of a common gel leads to a noticeable (18°C) increase in the transition temperature. For a cryogel, this growth is 3°C. During the interaction with cetylpyridinium chloride, the gel contraction is much more pronounced for common weakly charged gels. At the same time, walls of pores of a collapsed cryogel contain a smaller amount of the solvent. Isotherms of the adsorption of a cationic surfactant by anionic common gels and cryogels differ insignificantly. Model gels synthesized in concentrated acrylamide solutions exhibit very weak polyelectrolyte swelling, similar to that of cryogels. The behavior of cryogels is explained by a very high local concentration of crosslinks due to a strong entanglement of polymer chains.     

Study of Cryostructuring of Polymer Systems: 22. Composite Poly(vinyl alcohol) Cryogels Filled with Dispersed Particles of Various Degrees of Hydrophilicity/Hydrophobicity

Composite poly(vinyl alcohol) cryogels formed by the freezing–thawing of aqueous concentrated polymer solutions containing suspended filler were prepared and studied. The particles of unmodified silica gels were used as solid hydrophilic fillers and silica gels with grafted C2, C8, and C18 alkyl groups, as hydrophobic fillers. The granules of cross-linked dextran gel (Sephadex) swollen in water were used as soft hydrophilic fillers and lipophilic Sephadexes modified with propylene oxide groups, as soft hydrophobic fillers. It was shown that the microstructure and mechanical properties of such composites are affected by the presence of hydrophobic dispersed phase, namely, as the hydrophobicity of dispersed particles rises, the rigidity of composites increases with filler concentration at progressively lesser extent.     

The Relation Between Phase Behavior and Formation of Narrow Size Distribution W/O Emulsions

Water-in-oil (W/O) emulsions of the water/C₁₂E₅/isooctanol/isooctane system have been prepared at 25° C. Phase behavior studies of the system with constant (2.5 and 6 wt.%) isooctanol concentration showed that the surfactant becomes more lipophilic with the increase in the alkanol concentration. Emulsification was carried out using four low-energy emulsification methods using the slow addition of one or various components to the rest of them, with gentle agitation. Emulsions with low-polydis-persity were obtained when the emulsification process started with a single lamellar liquid crystalline phase. If in addition to a lamellar liquid crystalline phase, other phases, such as excess water phase, were initially present, emulsions with intermediate polydispersity were produced. When a lamellar liquid crystalline phase was not involved and the spontaneous natural curvature of the surfactant was not changed during emulsification, highly polydisperse emulsions were obtained.     

Study of cryostructuring of polymer systems: 28. Physicochemical properties and morphology of poly(vinyl alcohol) cryogels formed by multiple freezing-thawing

Macroporous viscoelastic poly(vinyl alcohol) (PVA) cryogels are prepared from aqueous concentrated (80–120 g/l) PVA solutions subjected to 1–5 cycles of cryogenic treatment (freezing at ?20°C for 19 h and subsequent thawing at a rate of 0.3°C/min). Shear moduli and fusion temperatures of corresponding samples are determined and the structure of thin sections is studied by optical microscopy with subsequent processing and analysis of images obtained. The previously described effect of a substantial increase in the rigidity and thermal stability of PVA cryogels resulted from the repeated freezing-thawing cycles is confirmed. The largest (jumpwise) changes in the physicochemical characteristics of such gels and their macroporous morphology take place after the second cycle of cryogenic treatment. Moreover, depending on the PVA concentration in the initial solution, the mean cross section of micropores increases by a factor of 2–3 and the total porosity of cryogel rises by a factor of 1.5–2; i.e., the imperfection of material increases. Nevertheless, this negative (from view-point of the integral properties of cryogel) effect is completely overpowered by processes of additional structuring, which result in the strengthening of polymer phase proceeding during the repeated freezing-thawing cycles.     

Superfast Responsive Ionic Hydrogels: Effect of the Monomer Concentration

A series of strong polyelectrolyte gels were prepared in aqueous solution, using the sodium salt of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) as the monomer and N,N'‐methylene(bis)acrylamide (BAAm) as a crosslinker. The gels were both prepared below (?22°C) and above (25°C) the bulk freezing temperature of the water, producing cryogels and hydrogels, respectively. The crosslinker (BAAm) content was set at 17 mol%, while the initial monomer concentration C_o was varied over a wide range. It was found that, at ?22°C, a macroscopic network starts to form at an initial monomer concentration of as low as 0.1 w/v%. In contrast to the conventional hydrogels formed at 25°C, the cryogels have a discontinuous morphology consisting of polyhedral pores of sizes 10⁰–10² μm. The cryogels exhibit superfast swelling properties, as well as reversible swelling–deswelling cycles in water and acetone. An increase in the initial monomer concentration from 2.5 to 10% further increases the response rate of the cryogels due to the simultaneous increase of the porosity of the networks.     

Morphological change of thermosensitive imidazolium‐based poly(ionic liquid)/poly(phenylethylmethacrylate) composite particles

Composite particles comprising poly(2‐phenylethyl methacrylate) (PPhEMA) and imidazolium‐based poly(ionic liquid)s were prepared by suspension polymerization of 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide as an ionic liquid monomer with dissolved PPhEMA. Not only PPhEMA exhibits lower critical solution temperature (LCST) behavior in 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide but also the polymer blend in the bulk state exhibited LCST behavior. However, the composite polymer particles obtained after polymerization at 70°C maintained a homogeneous inner structure after heat treatment as the polymerization temperature was greater than the LCST in this system due to the formation of a cross‐linked structure during polymerization. When the composite particles were prepared by suspension polymerization at 30°C, their inner morphology changed from homogeneous to phase separated during the subsequent heat treatment. Moreover, the morphology transformation of the composite particles was dependent on the PPhEMA molecular weight. Copyright © 2016 John Wiley & Sons, Ltd.     

Polyelectrolyte/surfactant mixtures in the bulk and at water/oil interfaces

Stabilization of emulsions by mixed polyelectrolyte/surfactant systems is a prominent example for the application in modern technologies. The formation of complexes between the polymers and the surfactants depends on the type of surfactant (ionic, non-ionic) and the mixing ratio. The surface activity (hydrophilic–lipophilic balance) of the resulting complexes is an important quantity for its efficiency in stabilizing emulsions. The interfacial adsorption properties observed at liquid/oil interfaces are more or less equivalent to those observed at the aqueous solution/air interface, however, the corresponding interfacial dilational and shear rheology parameters differ quite significantly. The interfacial properties are directly linked to bulk properties, which support the picture for the complex formation of polyelectrolyte/surfactant mixtures, which is the result of electrostatic and hydrophobic interactions. For long alkyl chain surfactants the interfacial behavior is strongly influenced by hydrophobic interactions while the complex formation with short chain surfactants is mainly governed by electrostatic interactions.     

The effect of modifier concentration on the stability of emulsions and foams stabilized with colloidal silica particles

The stability of emulsions and foams stabilized with hexylamine-modified silica particles has been studied as depending on the concentration of the surfactant. Silica modification with short-chain hexylamine leads to a marked increase in the contact angle upon selective wetting and inversion of the phases in the emulsions. The contact angles upon wetting silica surface by aqueous phases are no larger than 60°, while the maximum stability of foams corresponds to contact angles of 38°–50° depending on the concentration of the solid particles.     

Effect of silica particles on stability of highly concentrated water-in-oil emulsions with non-ionic surfactant

Water-in-oil, high internal phase emulsion made of super-cooled aqueous solution containing a mixture of inorganic salts and stabilized with non-ionic surfactant (sorbitan monooleate) alone was investigated. It was not possible to produce a highly concentrated emulsion (with aqueous phase fraction = 94 wt %), stabilized with surface-treated silica, solely: we were able to form an emulsion with a maximal aqueous phase mass fraction of 85 wt % (emulsion inverts/breaks above this concentration). The inversion point is dependent on the silica particle concentration, presence of salt in the aqueous phase, and does not depend on the pH of the dispersed phase. All emulsions stabilized by the nanoparticles solely were unstable to shear. So, the rheological properties and stability of the emulsions containing super-cooled dispersed phase, with regards to crystallization, were determined for an emulsion stabilized by non-ionic surfactant only. The results were compared to the properties obtained for emulsions stabilized by surface treated (relatively hydrophobic) silica nanoparticles as a co-surfactant to sorbitan monooleate. The influence of the particle concentration, type of silica surface treatment, particle/surfactant ratio on emulsification and emulsion rheological properties was studied. The presence of the particles as a co-stabilizer increases the stability of all emulsions. Also, it was found that the particle/surfactant ratio is important since the most stable emulsions are those where particles dominate over the surfactant, when the surfactant’s role is to create bridging flocculation of the particles. The combination of the two types of hydrophobic silica particles as co-surfactants is: one that resides at the water/oil interface and provides a steric boundary and another that remains in the oil phase creating a 3D-network throughout the oil phase, which is even more beneficiary in terms of the emulsion stability.     

聚氨酯/聚丙烯酸酯复合乳液粒子热力学平衡形态预测

以水性聚氨酯分散液为种子采用无皂乳液聚合新技术合成出了具有核壳结构的聚氨酯/聚丙烯酸酯（PU/PA）复合聚合物乳液。采用界面张力简化计算方法计算了聚合物与聚合物之间以及聚合物和水之间的界面张力,通过界面自由能变化最小的热力学判据对合成的复合乳液粒子的热力学平衡形态进行了预测。并利用透射电子显微镜观察和用接触角法测定的膜的表面极性对其进行了证实。结果表明：界面自由能变化的最小判据可以推广到PU/PA 体系,本文给出的界面张力的简化计算方法是可行的。     

Hydrophobic polyurethane polyHIPEs templated from mannitol within nonaqueous high internal phase emulsions for oil spill recovery

Although amphiphilicity is an integral component for the applications of polyHIPEs (PHs), it is challenging to produce hydrophobic PHs from hydrophilic monomers. Herein, hydrophobic polyurethane (PU) PHs have been fabricated from a water‐soluble mannitol within block copolymer surfactant‐stabilized, nonaqueous high internal phase emulsions (HIPEs). These highly porous, interconnected, macroporous PU PHs were hydrophobic with water contact angles between 102° and 140°, demonstrating that water‐soluble monomers could be used for fabrication of hydrophobic PHs. The block copolymer surfactant acted not only as the HIPE stabilizer, but also as a monomer, enhancing hydrophobicity and overcoming some drawbacks imposed by conventional inert stabilizers. The solvents used for PU PH synthesis and purification were easily recovered and reused, showing that nonaqueous HIPE templating for PU PH preparation is an efficient and facile route. The PU PHs were investigated for oil spill reclamation and they were demonstrated to be an ideal candidate for such an application. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1315–1321