微流控细胞芯片LED诱导荧光检测微系统

基于微流控细胞芯片分析技术和微机电系统(MEMS)加工技术, 设计制作了阵列式微流控细胞检测芯片, 采用自组装的顶窗型光电倍增管(PMT)和信号采集电路采集芯片微管道内流动细胞的荧光信号, 构建了一种针对低浓度细胞悬浮液的微流控细胞芯片发光二极管(LED)诱导荧光的快速检测微系统, 实现了对低浓度(≤40 Cell/mL)荧光标记的HepG2肝癌细胞悬浮液样本的定量计数和测试, 而且在血液细胞共存的条件下, 仍可以有效地对血液中少量HepG2肝癌细胞进行荧光计数和测试. 整个系统结构简单, 操作方便且检测灵敏度较高.     

Hexokinase production fromS. cerevisiae

Applied Biochemistry and Biotechnology - The effects of pH (4.0, 4.5, or 5.0), temperature (T) (30, 35, or 40°C) and dissolved oxygen (DO) (0.2, 2.0, 4.0, or 6.0 mg O2/L) on hexokinase and...     

Structurally integrated organic light emitting device-based sensors for gas phase and dissolved oxygen

A compact photoluminescence (PL)-based O2 sensor utilizing an organic light emitting device (OLED) as the light source is described. The sensor device is structurally integrated. That is, the sensing element and the light source, both typically thin films that are fabricated on separate glass substrates, are attached back-to-back. The sensing elements are based on the oxygen-sensitive dyes Pt- or Pd-octaethylporphyrin (PtOEP or PdOEP, respectively), which are embedded in a polystyrene (PS) matrix, or dissolved in solution. Their performance is compared to that of a sensing element based on tris(4,7-diphenyl-l,10-phenanthroline) Ru II (Ru(dpp)) embedded in a sol-gel film. A green OLED light source, based on tris(8-hydroxy quinoline Al (Alq3), was used to excite the porphyrin dyes; a blue OLED, based on 4,4'-bis(2,2'-diphenylviny1)-1,1'-biphenyl, was used to excite the Ru(dpp)-based sensing element. The O2 level was monitored in the gas phase and in water, ethanol, and toluene solutions by measuring changes in the PL lifetime tau of the O2-sensitive dyes. The sensor performance was evaluated in terms of the detection sensitivity, dynamic range, gas flow rate, and temperature effect, including the temperature dependence of tau in pure Ar and O2 atmospheres. The dependence of the sensitivity on the preparation procedure of the sensing film and on the PS and dye concentrations in the sensing element, whether a solid matrix or solution, were also evaluated. Typical values of the detection sensitivity in the gas phase, S(g) identical with tau(0% O2)/tau(100% O2), at 23 degrees C, were approximately 35 to approximately 50 for the [Alq3 OLED[/[PtOEP dye] pair; S(g) exceeded 200 for the Alq3/PdOEP sensor. For dissolved oxygen (DO) in water and ethanol, S(DO) (defined as the ratio of tau in de-oxygenated and oxygen-saturated solutions) was approximately 9.5 and approximately 11, respectively, using the PtOEP-based film sensor. The oxygen level in toluene was measured with PtOEP dissolved directly in the solution. That sensor exhibited a high sensitivity, but a limited dynamic range. Effects of aggregation of dye molecules, sensing film porosity, and the use of the OLED-based sensor arrays for O2 and multianalyte detection are also discussed.     

Oxygen measurement via phosphorescence: reaction of sodium dithionite with dissolved oxygen

A homemade instrument for the measurement of oxygen concentration in aqueous solutions measures the decay rate of the phosphorescence of a Pd-porphyrin complex (phosphor) dissolved in the solution, which is flashed every 0.1 s with 630 nm light. The concentration of O2 is a linear function of the decay rate. The instrument is used to study the reaction of dithionite (S2O42-) with O2 at 25 degrees C and 37 degrees C. It is found that the ratio of dithionite to oxygen consumed in the reaction is 1.2 +/- 0.2 at 25 degrees C and 1.7 +/- 0.1 at 37 degrees C, suggesting a temperature-dependent stoichiometry. At both temperatures, the initial rate of O2 consumption, -d[O2]/dt, is found to be 1/2 order in S2O42- and first order in O2. This finding is consistent with a previously proposed mechanism: S2O42- <--> 2SO2- comes to a rapid equilibrium, and SO2- reacts with O2 in the rate-determining step.     

一个新的铈砷钨酸盐大阴离子[As4W40O140Ce(H2O)5]^25-

合成了一新的铈砷钨酸盐[As4W40C140Ce(H2O)5]Na25·63H2O,用X射线单晶衍射法及元素分析确定了其结构。其晶胞参数为：a=3.1252(8)nm,b=2.2656(6)nm,c=1.3973(9)nm,α=β=γ90°,V=9.893(7)nm^3,空间群P21/m21/m2/n。在聚阴离子[As4W40O140Ce(H2O)5]^25-中,四个桥连WO6八面体通过相互共享两个顺式氧串联四个B-α-(AsW9O33)^9-形成环配体(As4W40O140)^28-的基本框架,四个B-α-(AsW9O33)^9-并不处在一个平面上,而是上下交错分布的。中心离子Ce(Ⅲ)未完全填充在(As4W40O140)^28-中具有八齿配位能力的S1洞穴中,而是四个桥连的WO6八面体各提供一个端基氧向Ce(Ⅲ)配位,另有五个水分子向Ce(Ⅲ)配位,Ce(Ⅲ)离子的配位数为9,该离具有C2v对称性。     

Improved isotope ratio measurement performance in liquid chromatography/isotope ratio mass spectrometry by removing excess oxygen

A low dead volume oxygen scrubbing system was introduced in a commercially available liquid chromatography/isotope ratio mass spectrometry (LC/IRMS) interface to enhance the analytical capability of the system. In the LC/IRMS interface carbon from organic samples is converted into CO(2) inside the mobile phase by wet chemical oxidation using peroxodisulfate (Na(2)S(2)O(8)). After passing the hot reaction zone, surplus oxygen (O(2)) remains dissolved in the liquid phase. Both CO(2) and O(2) diffuse through a transfer membrane into the helium carrier and are transferred to the mass spectrometer. The presence of O(2) in the ion source may have detrimental effects on measurement accuracy and precision as well as on filament lifetime. As a remedy, a new on-line O(2)-removing device has been incorporated into the system.The new O(2) scrubber consists of two parallel hot copper reduction reactors (0.8 mm i.d., active length 120 mm) and a switch-over valve between them. One reactor is regenerated using He/H(2) while the other is actively scavenging O(2) from the gas stream. The capacity of each reduction reactor, expressed as usage time, is between 40 and 50 min. This is sufficient for a single LC run for sugars and organic acids. A further increase of the reduction capacity is accompanied by a peak broadening of about 100%. After switching to a freshly reduced reactor the oxygen background and the delta(13)C values of the reference gas need up to 500 s to stabilize. For repeated injections the delta(13)C values of sucrose remain constant (+/-0.1 per thousand) for about 3000 s. The long-term stability for measurements of sucrose was 0.11 per thousand without the reduction oven and improved slightly to 0.08 per thousand with the reduction oven. The filament lifetime improved by more than 600%, thereby improving the long-term system stability and analytical efficiency. In addition the costs per analysis were reduced considerably.     

Effects of bulk impurity concentration on the reactivity of metal surface: sticking of hydrogen molecules and atoms to polycrystalline Nb containing oxygen

Nonmetallic impurities segregated onto metal surfaces are able to drastically decrease the chemical reactivity of metals. In the present paper, effects of bulk impurities on the reactivity of metallic surfaces were investigated in a wide temperature range on an example of the sticking of hydrogen molecules and atoms to Nb [polycrystalline, with mainly (100)] containing solute oxygen. At all the investigated surface temperatures, T(S) (300-1400 K), we found the bulk oxygen concentration C(O) to have a strong effect on the integral probability, alpha(H(2) ), of dissociative sticking of H(2) molecules followed by hydrogen solution in the metal lattice: alpha(H(2) ) monotonically decreased by orders of magnitude with increasing C(O) from 0.03 to 1.5 at. %. The sticking coefficient alpha(H(2) ) was found to depend on T(S) but not on the gas temperature. The effect of C(O) on alpha(H(2) ) is explained by the presence of oxygen-free sites (holes in coverage) serving as active centers of the surface reaction in the oxygen monolayer upon Nb. In contrast to H(2) molecules, H atoms were found to stick to, and be dissolved in, oxygen-covered Nb with a probability comparable to 1, depending neither on C(O) nor on T(S). This proves that, unlike H(2) molecules, H atoms do stick to be dissolved mainly through regular surface sites covered by oxygen and not through the holes in coverage.     

Nanometre-sized molecular oxygen sensors prepared from polymer stabilized phospholipid vesicles

Nanometre-sized, chemically-stabilized phospholipid vesicle sensors have been developed for detection of dissolved molecular oxygen. Sensors were prepared by forming 150 nm phospholipid vesicles from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) or DOPC doped with small (<1%) mole percentages of 1,2-dioleoyl-sn-glycero-3-phosphoethanol amine-N-(7-nitro-2-1,3-benzoxadiazol-4-yl) (NBD-PE). Sensors were stabilized via cross-linking polymerization of hydrophobic methacrylate monomers partitioned into the hydrophobic interior of the DOPC bilayer. The resultant unilamellar, nanometre-sized, polymer-lipid vesicles are spherical, biocompatible and protect sensing components that are loaded into the aqueous interior of the vesicle from interfering species in the exterior environment. For O(2) detection, the oxygen-sensitive fluorescent dye, tris(1,10-phenanthroline)ruthenium(II) chloride (Ru(phen)(3)) was encapsulated into the aqueous interior of the polymerized phospholipid vesicle. NBD-PE was introduced into the phospholipid bilayer of the sensor as a reference dye, allowing ratiometric sensors to be constructed. The resultant sensors show high sensitivity, excellent reversibility and excellent linearity over a physiological range of dissolved oxygen concentrations. These results suggest that polymerized phospholipid vesicle sensors can be used for monitoring intracellular O(2) dynamics.     

Structural and elemental investigations of isolated aquatic humic substances using X-ray photoelectron spectroscopy

Structural and elemental investigations of aquatic humic substances (HS) by means of X-ray photoelectron spectroscopy (XPS) are described. For that purpose small amounts (10-50 microg) of dissolved reference HS, which were characterized within the German research program DFG-ROSIG, were dried as thin films on small pieces of a high-purity silicon wafer. The photoelectrons from such HS layers exhibited characteristic signals of carbon C1s, nitrogen N1s, oxygen O1s and sulfur S2s, which could be fitted by Gaussian curves and used for the quantification of various moieties of HS: carbon (C-C, C-O, C=O, O=C-O), oxygen (C-O, C=O), nitrogen (C-N, C-N+) and sulfur. Moreover, by adding up the element signals of the HS samples their elemental composition of C, O, N and S was assessed. A comparison of the data based on solution state NMR and conventional elementary analysis revealed a satisfactory accuracy with those obtained by XPS.     

Luminescence Quenching Behavior of Oxygen Sensing ORMOSIL Films Based on Ruthenium Complex

An organically modified silicate(ORMOSIL) based optical sensor response to gaseous O2 or O2 dissolved in water is presented. The oxygen sensing film mechanism is based on the principle of fluorescence quenching of tris(4,7-diphenyl-l , 10-phenanthroline) ruthenium ( ) ([Ru(dpp)3]2+), which has been entrapped in a porous ORMOSIL film. In order to establish optimum film-processing parameters, comprehensive investigations, including the effects of the polarity and the hydrophobicity of the sensing film on oxygen quenching response and response time, were carried out. The film hydrophobicity increased as a function of dimethyl-dimethoxysilane (DiMe-DMOS) content, which is correlated with enhanced oxygen sensor performance. The sensor developed in the present work exhibits the advantages of fast response time and good reversibility. The detection limits are 0. 5 % and 0. 3 g/mL for O2 in the gaseous and the aqueous phases, respectively.     

Subcellular, time-resolved studies of singlet oxygen in single cells

In time-resolved and spatially resolved experiments, singlet molecular oxygen, O2(a1Deltag), was created in a single nerve cell upon irradiation of a sensitizer incorporated in the cell using a focused laser beam. The singlet oxygen thus produced was detected by its infrared phosphorescence. Data obtained indicate that in both the cytoplasm and the nucleus of the cell, this reactive species is approximately 1-2 orders of magnitude longer-lived than previously believed. The data demonstrate that deactivation of singlet oxygen in the cell is dominated by interactions with the solvent not cellular constituents such as proteins. These results provide a new perspective for mechanistic studies of the role of O2(a1Deltag) in photoinduced cell death and intracellular signaling.     

A parametric study of human fibroblasts culture in a microchannel bioreactor

The culture of cells in a microbioreactor can be highly beneficial for cell biology studies and tissue engineering applications. The present work provides new insights into the relationship between cell growth, cell morphology, perfusion rate, and design parameters in microchannel bioreactors. We demonstrate the long-term culture of mammalian (human foreskin fibroblasts, HFF) cells in a microbioreactor under constant perfusion in a straightforward simple manner. A perfusion system was used to culture human cells for more than two weeks in a plain microchannel (130 microm x 1 mm x 2 cm). At static conditions and at high flow rates (>0.3 ml h(-1)), the cells did not grow in the microchannel for more than a few days. For low flow rates (<0.2 ml h(-1)), the cells grew well and a confluent layer was obtained. We show that the culture of cells in microchannels under perfusion, even at low rates, affects cell growth kinetics as well as cell morphology. The oxygen level in the microchannel was evaluated using a mass transport model and the maximum cell density measured in the microchannel at steady state. The maximum shear stress, which corresponds to the maximum flow rate used for long term culture, was 20 mPa, which is significantly lower than the shear stress cells may endure under physiological conditions. The effect of channel size and cell type on long term cell culture were also examined and were found to be significant. The presented results demonstrate the importance of understanding the relationship between design parameters and cell behavior in microscale culture system, which vary from physiological and traditional culture conditions.     

Synthesis and Structural Characterization of {[Mn(phen)_2(OAc)(H_2O)]ClO_4}_2H_2O

1 INTRODUCTION Chemistry of manganese cluster has become an attractive research field because of the involvement of manganese in several biological redox-active sys- tems[1,2], especially in the oxygen-evolving complex (OEC) of photosystem Ⅱ (PSⅡ) in green plants[3]. It was thought that the coordination environment of Mn in OEC contains O and N donors, and the bind- ing of aqua to the Mn site may be important to the oxidation of aqua for the evolution of dioxygen[4, 5]. In recent …     

Removal of dissolved oxygen from water: A comparison of four common techniques

Four common techniques for the removal of dissolved oxygen from water have been examined: boiling at 1 atm, boiling under reduced pressure, purging with N(2) and sonication under reduced pressure. After treatment, the residual oxygen in solution was analysed by the Winkler method. Nitrogen purging for 20-40 min at flow rate of 25 mL/s was found to be the most effective oxygen removal method. Boiling at 1 atm was found to be the least effective. None of the techniques evaluated here lead to complete removal of oxygen. The concentration of residual dissolved oxygen after purging for 20-40 minutes with nitrogen is 0.2-0.4 ppm.     

Hydrogen-bonded assemblies of two-electron reduced mixed-valence [XMo12O40] (X = P and Si) with p-phenylenediamines

Hydrogen-bonded assemblies of the two-electron reduced mixed-valence Keggin clusters [PMo(12)O(40)](5-) and [SiMo(12)O(40)](6-) were obtained by the one-pot electron-transfer reactions between p-phenylenediamine (PPD) or 2,3,5,6-tetramethyl-PPD (TMPPD) (donors) and H(+)(3)[PMo(12)O(40)](3-) or H(+)(4)[SiMo(12)O(40)](4-) (acceptors) in CH(3)CN. The redox states of the [PMo(12)O(40)](5-) and [SiMo(12)O(40)](6-) clusters were confirmed by the redox titrations and electronic absorption measurements. In (HPPD(+))(3)(H(+))(2)[PMo(12)O(40)](5-)(CH(3)CN)(3-6) (1), the N-H ~ O hydrogen-bonded interactions between the monoprotonated HPPD(+) (or diprotonated H2PPD(2+)) and the [PMo(12)O(40)](5-) resulted in a windmill-like assembly and hydrophilic one-dimensional channels are formed with a cross-sectional area of 0.065 nm(2), and these are filled by the CH(3)CN molecules. Also, the CH(3)CN molecules in salt 1 were removed by immersing the single crystals of 1 into H(2)O, CH(3)OH, and C(2)H(5)OH solvents. In the compound, (HTMPPD(+))(6)[SiMo(12)O(40)](6-)(CH(3)CN)(6) (2), the N-H ~ O hydrogen-bonded interactions between the monoprotonated HTMPPD(+) molecules and the [SiMo(12)O(40)](6-) formed a "Saturn-ring"-like assembly. Each Saturn-ring was arranged into an hexagonally packed array via hydrogen-bonded and π-stacking interactions of HTMPPD(+), while the CH(3)CN solvent present in salt 2 are only found in the zero-dimensional isolated cavities.     

Weakly coordinating anions HA2-generated from oxoanions A- and their conjugate acids. Coordination equilibria,ionic conductivities,and the structures of [Cu2(H(CH3SO3)2)4]n and [Cu(CO)(H(CF3CO2)2)]2

The coordination or ion pairing of the hydrogen-bonded anions H(CF3CO2)2- and H(CH3SO3)2- to NEt4+, Li+, Cu+, and/or Cu2+ was investigated. The structure of [Cu2(H(CH3SO3)2)4]n consists of centrosymmetric dimeric moieties that contain two homoconjugated (CH3SO2O-H...OSO2CH3)- anions per Cu2+ ion, forming typical Jahn-Teller tetragonally elongated CuO6 coordination spheres. The oxygen atoms involved in the nearly linear O-H...O hydrogen bonds (O...O approximately 2.62 A) are not coordinated to the Cu2+ ions. The structure of Cu2(CO)2(H(CF3-CO2)2)2 consists of pseudo-C2-symmetric dimers that contain one homoconjugated (CF3COO-H...OCOCF3)- anion per Cu+ ion, forming highly distorted tetrahedral Cu(CO)O3 coordination spheres. Three of the four oxygen atoms in each hydrogen-bonded H(CF3CO2)2- anion are coordinated to the Cu+ ions, including one of the oxygen atoms in each O-H...O hydrogen bond (O...O approximately 2.62 A). Infrared spectra (v(CO) values) of Cu(CO)(CF3CO2) or Cu(CO)(CH3SO3) dissolved in acetonitrile or benzene, with and without added CF3COOH or CH3SO3H, respectively, demonstrate that HA2- anions involving carboxylates or sulfonates are more weakly coordinating than the parent anions RCO2- and RSO3-. Direct current conductivities of THF solutions of Li(CF3CO2) containing varying concentrations of added CF3COOH further demonstrate that Li+ and NEt4+ ion pair much more weakly with H(CF3CO2)2- than with CF3CO2-.     

Poly(decyl methacrylate)-based fluorescent PEBBLE swarm nanosensors for measuring dissolved oxygen in biosamples

150-250 nm Poly(decyl methacrylate)(PDMA) fluorescent ratiometric nanosensors for dissolved oxygen have been developed. Platinum octaethylporphine ketone (PtOEPK), the oxygen-sensitive dye, and octaethylporphyrin (OEP), the oxygen-insensitive dye, have been incorporated into PDMA nanoparticles to make the sensors ratiometric. Based on the corresponding Stern-Volmer plot, these nanosensors exhibit almost complete linearity over the whole range of dissolved molecular oxygen from 0 to 42.5 ppm (deoxygenated to pure oxygen-bubbled water). The overall quenching response is up to 97.5%, the best so far for all dissolved oxygen optical sensors. These PEBBLE nanosensors also show very good reversibility and stability to leaching and photobleaching, as well as very short response times and no perturbation by proteins. In human plasma they demonstrate a robust oxygen sensing capability, little affected by light scattering and autofluorescence. Potential applications include intracellular oxygen imaging and microresolved pressure profiles in biological and other heterogenous environments.     

A High Sensitivity Detection Method of Singlet Oxygen and Superoxide Anion

This paper, for the first time, reports a method that can be used as a highly sensitive probe for singlet oxygen (^1O2) and superoxide anion (O2^-) in vitro or in vivo. FCLA(3,7-dihydro-6-{4-[2-(N‘-(5-fluoresceinyl)thioureido)ethoxy]phenyl}-2-methylimidazo{1,2-a}pyrazin-3-one sodium salt), a chemiluminescence (CL) analysis reagent, has been reported to sensitively react with ^1O2 and O2^- to emit photons with a spectral peak of 525nm. In this work,when human serum albumin (HSA) was added into FCLA solution to enhance the CL intensity,approximately 20 times, compared to that without HSA. The enhanced CL had the same 525 nm spectral peak, identical to that without HSA. By gradually reducing the molecular oxygen content in the solution, we find that the auto-oxidation of oxygen molecules dissolved in the solution plays an important role in the CL process. Based on these experimental evidences, we propose a novel and highly sensitive detection method of ^1O2 and O2^- which may have a great potential in chemical and medical applications.     

Evaluation of diethyl-3-3'-(9,10-anthracenediyl)bis acrylate as a probe for singlet oxygen formation during photodynamic therapy

The cell-permeable anthracene analog diethyl-3-3'-(9,10-anthracenediyl)bis acrylate (DADB) was recently identified as a highly selective probe for singlet oxygen ((1)O(2)). Now, we show that DADB can be used to monitor (1)O(2) formation in cell culture during photodynamic therapy. An atypical property of DADB is that fluorescence emission is decreased upon oxidation. Using photosensitizers that target specific organelles, we determined that DADB could detect (1)O(2) whether formed in ER, mitochondria or lysosomes. DADB fluorescence was not, however, significantly altered when the photosensitizing agent was the palladium bacteriopheophorbide termed WST11, an agent reported to produce mainly oxygen radicals upon irradiation in an aqueous environment, whereas singlet oxygen was formed in organic solvents.     

Fiber-optic fluorescence sensor for dissolved oxygen detection based on fluorinated xerogel immobilized with ruthenium (II) complex

A fiber-optic sensor based on fluorescence quenching was designed for dissolved oxygen (DO) detection. The fluorinated xerogel-based sensing film of the present sensor was prepared from 3, 3, 3-trifluoropropyltrimethoxysilane (TFP–TriMOS). Oxygen-sensitive fluorophores of tris (2, 2′- bipyridine) ruthenium (II) (Ru(bpy)₃²⁺) were immobilized in the sensing film and the emission fluorescence was quenched by dissolved oxygen. In the sensor fabrication, a two-fiber probe was employed to obtain the best fluorescence collection efficiency and the sensing film was attached to the probe end. Scanning electron microscope (SEM), UV–Vis absorption spectroscopy (UV–Vis) and fourier transform infrared spectroscopy (FTIR) measurements have been used to characterize the sensing film. The sensor sensitivity is quantified by I _deoxy/I _oxy, where I _deoxy and I _oxy represented the detected fluorescence intensities in fully deoxygenated and fully oxygenated environments, respectively. Compared with tetramethoxysilane (TMOS) and methyltriethoxysilane (MTMS)-derived sensing films, TFP–TriMOS-based sensor exhibited excellent performances in dissolved oxygen detection with short response time of 4 s, low limit of detection (LOD) of 0.04 ppm (R.S.D. = 2.5%), linear Stern–Volmer calibration plot from 0 to 40 ppm and long-term stability during the past 10 months. The reasons for the preferable performances of TFP–TriMOS-based sensing film were discussed.