Infrared absorption spectra of pure and doped YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> single crystals

Several weak absorption bands have been observed in the optical absorption spectra of pure and rare-earth-doped YAl₃(BO₃)₄ single crystals in the 3350– 3650 cm⁻¹ wave number region. Two of them, peaking at about 3377 cm⁻¹ and 3580 cm⁻¹ in the 8 K spectra, appear in most of the samples. They are tentatively attributed to the stretching mode of OH⁻ ions incorporated in the crystal during the growth. An additional absorption band at about 5250 cm⁻¹ at 8 K has also been detected in almost all samples. The temperature and polarization dependences of these bands, and their possible origin, are discussed.     

Dielectric spectra of Bi<Subscript>0.98</Subscript>Nd<Subscript>0.02</Subscript>FeO<Subscript>3.00</Subscript> multiferroic thin films in the terahertz frequency range

Transmission and reflection spectra of Bi_0.98Nd_0.02FeO_3.00 multiferroic thin films on MgO single-crystal substrates have been measured using submillimeter spectroscopy (on a backward-wave tube spectrometer) and Fourier-transform infrared spectroscopy in the frequency range from 8 to 1000 cm⁻¹ at room temperature. The complex permittivity spectra of the films have been calculated in terms of the layered medium model. It has been revealed that a decrease in the film thickness leads to a considerable increase in the losses in a range of 30 cm⁻¹ and the corresponding fivefold increase in the static permittivity (to 500 for a film 32 nm thick). This phenomenon has been discussed in the framework of the phenomenological theory of phase transitions.     

Structural and electrical properties of pure and H<Subscript>2</Subscript>SO<Subscript>4</Subscript> doped (PVA)<Subscript>0.7</Subscript>(NaI)<Subscript>0.3</Subscript> solid polymer electrolyte

Solid polymer electrolytes (SPE) based on poly-(vinyl alcohol) (PVA)_0.7 and sodium iodide (NaI)_0.3 complexed with sulfuric acid (SA) at different concentrations were prepared using solution casting technique. The structural properties of these electrolyte films were examined by X-ray diffraction (XRD) studies. The XRD data revealed that sulfuric acid disrupt the semi-crystalline nature of (PVA)_0.7(NaI)_0.3 and convert it into an amorphous phase. The proton conductivity and impedance of the electrolyte were studied with changing sulfuric acid concentration from 0 to 5.1 mol/liter (M). The highest conductivity of (PVA)_0.7(NaI)_0.3 matrix at room temperature was 10⁻⁵ S cm⁻¹ and this increased to 10⁻³ S cm⁻¹ with doping by 5.1 M sulfuric acid. The electrical conductivity (σ) and dielectric permittivity (ε′) of the solid polymer electrolyte in frequency range (500 Hz–1 MHz) and temperature range (300–400) K were carried out. The electrolyte with the highest electrical conductivity was used in the fabrication of a sodium battery with the configuration Na/SPE/MnO₂. The fabricated cells give open circuit voltage of 3.34 V and have an internal resistance of 4.5 kΩ.     

Magnetism of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> manganite in structurally ordered and disordered states

The specific features of the crystal structure and the magnetic state of stoichiometric lithium manganite in the structurally ordered Li[Mn₂]O₄ and disordered Li_{1 − δ}Mn_δ[Mn_{2 − δ}Li_δ]O₄ (δ = 1/6) states have been investigated using neutron diffraction, X-ray diffraction, and magnetic methods. The structurally disordered state of the manganite was achieved under irradiation by fast neutrons (E _eff ≥ 1 MeV) with a fluence of 2 × 10²⁰ cm⁻² at a temperature of 340 K. It has been demonstrated that, in the initial sample, the charge ordering of manganese ions of different valences arises at room temperature, which is accompanied by orthorhombic distortions of the cubic spinel structure, and the long-range antiferromagnetic order with the wave vector k = 2π/c(0, 0, 0.44) is observed at low temperatures. It has been established that the structural disordering leads to radical changes in the structural and magnetic states of the LiMn₂O₄ manganite. The charge ordering is destroyed, and the structure retains the cubic symmetry even at a temperature of 5 K. The antiferromagnetic type of ordering transforms into ferrimagnetic ordering with local spin deviations in the octahedral sublattice due to the appearance of intersublattice exchange interactions.     

Fast ionic conduction in cubic hafnium garnet Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Hf<Subscript>2</Subscript>O<Subscript>12</Subscript>

A new member of the family of garnets with fast lithium ion conduction has been found with the composition Li₇La₃Hf₂O₁₂. The anion arrangement corresponds to the oxygen framework in garnets, e.g., in Ca₃Fe₂Si₃O₁₂. Hafnium is coordinated octahedrally while the lanthanum environment can be described as a distorted cube. Lithium occupies a large number of positions with tetrahedral, trigonal planar, and metaprismatic coordination. Li₇La₃Hf₂O₁₂ shows a lithium bulk ion conductivity of 2.4 × 10⁻⁴ Ω⁻¹ cm⁻¹ at room temperature with an activation energy of 0.29 eV.     

Effect of ionizing radiation on the dielectric characteristics of TlInSe<Subscript>2</Subscript> and TlGaTe<Subscript>2</Subscript> single crystals

The temperature dependences of the electrical conductivity and the permittivity of TlInSe₂ and TlGaTe₂ crystals unirradiated and irradiated with 4-MeV electrons at a doze of 10¹⁶ cm⁻² have been investigated. It has been established that electron irradiation leads to a decrease in the electrical conductivity σ and the permittivity ɛ over the entire temperature range under study (90–320 K). It has been revealed that the TlInSe₂ and TlGaTe₂ single crystals undergo a sequence of phase transitions characteristic of crystals of this type, which manifest themselves as anomalies in the temperature dependences σ = f(T) and ɛ = f(T). Electron irradiation at a doze of 10¹⁶ cm⁻² does not affect the phase transition temperatures of the crystals under investigation.     

Polarization modes in the Ba<Subscript>2</Subscript>Mg<Subscript>2</Subscript>Fe1<Subscript>2</Subscript>O<Subscript>22</Subscript> multiferroic

The spectra of complex permittivity of a Ba₂Mg₂Fe₁₂O₂₂ single crystal belonging to the family of Y-type hexaferrites have been measured over a wide temperature range (10–300 K) with the aim of determining the dynamic parameters of the phonon and magnetic subsystems in the terahertz and infrared frequency ranges (3–4500 cm⁻¹). A factor-group analysis of the vibrational modes has been performed, and the results obtained have been compared with the experimentally observed resonances. The oscillator parameters of all nineteen phonon modes of E _u symmetry, which are allowed by the symmetry of the Ba₂Mg₂Fe₁₂O₂₂ crystal lattice, have been calculated. It has been found that, at temperatures below 195 and 50 K, the spectral response exhibits new absorption lines due to magnetic excitations.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>:CaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> crystal

The absorption spectra, fluorescence spectrum and fluorescence decay curve of Nd³⁺ ions in CaNb₂O₆ crystal were measured at room temperature. The peak absorption cross section was calculated to be 6.202×10⁻²⁰ cm² with a broad FWHM of 7 nm at 808 nm for E//a light polarization. The spectroscopic parameters of Nd³⁺ ions in CaNb₂O₆ crystal have been investigated based on Judd-Ofelt theory. The parameters of the line strengths Ω _t are Ω ₂=5.321×10⁻²⁰ cm²,Ω ₄=1.734×10⁻²⁰ cm²,Ω ₆=2.889×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 167 μs, 152 μs and 91%, respectively. The fluorescence branch ratios are calculated to be β ₁=36.03%,β ₂=52.29%,β ₃=11.15%,β ₄=0.533%. The emission cross section at 1062 nm is 9.87×10⁻²⁰ cm².     

EPR and optical absorption studies of Cu<Superscript>2+</Superscript> ions in [ZnPd(CN)<Subscript>4</Subscript>(C<Subscript>4</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>O<Subscript>2</Subscript>)] single crystals

A Cu²⁺-doped single crystal of catena-trans-bis(N-(2-hydroxyethyl)-ethylenediamine) zinc(II)-tetra-m-cyanopaladate(II) [ZnPd(CN)₄(C₄H₁₂N₂O₂)] complex has been investigated by electron paramagnetic resonance (EPR) technique at room temperature. EPR spectra indicate that Cu²⁺ ions substitute for magnetically equivalent Zn²⁺ ions and form octahedral complexes in [ZnPd(CN)₄(C₄H₁₂N₂O₂)] hosts. The crystal field affecting the Cu²⁺ ion is nearly axial. The optical absorption studies show two bands at 322 nm (30864 cm⁻¹) and 634 nm (15337 cm⁻¹) which confirm the axial symmetry. The spin Hamiltonian parameters and the relevant wave function are determined.     

Spectroscopic Properties and Energy Transfer Analysis of Tm<Superscript>3+</Superscript>-Doped BaF<Subscript>2</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass

This paper reports on the spectroscopic properties and energy transfer analysis of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂-La₂O₃ glasses with different Tm₂O₃ doping concentrations (0.2, 0.5, 2.0, 2.5, 3.0, 3.5, 3.5, 4.0 wt%). Mid-IR fluorescence intensities in the range of 1,300 nm−2,200 nm have been measured when excited under an 808 nm LD for all the samples with the same pump power. Energy level structure and Judd-Ofelt parameters have been calculated based on the absorption spectra of Tm³⁺, cross-relaxation rates and multi-phonon relaxation rates have been estimated with different Tm₂O₃ doping concentrations. The maximum fluorescence intensity at around 1.8 μm has been obtained in Tm₂O₃-3 wt% sample and the maximum value of calculated stimulated emission cross-section of Tm³⁺ in this sample is about 0.48 × 10⁻²⁰ cm² at 1,793 nm, and there is not any crystallization peak in the DSC curve of this sample, which indicate the potential utility of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂- La₂O₃ glass for 2.0-μm optical fiber laser.     

Crystal growth,spectroscopic characterization and laser performance of Nd:Lu<Subscript>0.33</Subscript>Y<Subscript>0.36</Subscript>Gd<Subscript>0.3</Subscript>VO<Subscript>4</Subscript> crystal

A new three-matrix mixed vanadate crystal Nd:Lu_0.33Y_0.36Gd_0.3VO₄ (Nd:LuYGdVO₄) crystal was grown by the Czochralski method. Room temperature absorption and fluorescence spectra of the Nd:LuYGdVO₄ crystals were measured and the spectroscopic parameters were calculated by the Judd-Ofelt theory. The intensity parameters of the Nd:LuYGdVO₄ crystal were Ω₂ = 9.736 × 10⁻²⁰ cm², Ω₄ = 4.179 × 10⁻²⁰ cm², Ω₆ = 8.020 × 10⁻²⁰ cm² and the stimulate emission cross section was 5.3 × 10⁻¹⁹ cm². Diodepumped actively Q-switched and passively Q-switched Nd:LuYGdVO₄ and Nd:Lu_0.14Y_0.86VO₄ lasers at 1.06 μm were demonstrated. The results indicate that, for both actively and passively Q-switched lasers, the Nd:LuYGdVO₄ lasers can generate shorter pulse width with higher peak power than the Nd:Lu_0.14Y_0.86VO₄ lasers at the same cavity conditions.     

Preparation and characterization of the polymer electrolyte system ENR50/PVC/EC/PC/LiN(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript> for electrochemical device applications

Polymer electrolytes containing epoxidised natural rubber (ENR50)/poly(vinyl chloride) (PVC) blend as a polymer host, a solvent mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and lithium imide, LiN (CF₃SO₂)₂, as a salt were studied. Polymer electrolytes that were obtained by solvent cast yielded solid dry rubbery films with a thickness range of 110–125 μm. Impedance spectroscopy, Fourier transform infra red (FTIR) spectroscopy, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed on these samples. The prepared solid polymer electrolytes exhibit ionic conductivities in the order 10⁻⁴ S cm⁻¹ at room temperature as expected. However, the physical properties of the electrolytes have improved significantly when optimal composition has been selected. Paper presented at the International Conference on Solid State Science and Technology 2006, Kuala Terengganu, Malaysia, Sept. 4–6, 2006.     

Influence of carbon additive on the properties of spherical Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> and LiFePO<Subscript>4</Subscript> materials for lithium-ion batteries

Preparing spherical particles with carbon additive is considered as one effective way to improve both high rate performance and tap density of Li₄Ti₅O₁₂ and LiFePO₄ materials. Spherical Li₄Ti₅O₁₂/C and LiFePO₄/C composites are prepared by spray-drying–solid-state reaction method and controlled crystallization–carbothermal reduction method, respectively. The X-ray diffraction characterization, scanning electron microscope, Brunauer–Emmett–Teller, alternating current impedance analyzing, tap density testing, and electrochemical property measurements are investigated. After hybridizing carbon with a proper quantity, the crystal grain size of active materials is remarkably decreased and the electrochemical properties are obviously improved. The Li₄Ti₅O₁₂/C and LiFePO₄/C composites prepared in this work are spherical. The tap density and the specific surface area are as high as 1.71 g cm⁻³ and 8.26 m² g⁻¹ for spherical Li₄Ti₅O₁₂/C, which are 1.35 g cm⁻³ and 18.86 m² g⁻¹ for spherical LiFePO₄/C powders. Between 1.0 and 3.0 V versus Li, the reversible specific capacity of the Li₄Ti₅O₁₂/C is more than 150 mAh g⁻¹ at 1.0-C rate. Between 2.5 and 4.2 V versus Li, the reversible capacity of the LiFePO₄/C is close to 140 mAh g⁻¹ at 1.0-C rate.     

Microstructure of Cu<Subscript>60</Subscript>Zr<Subscript>20</Subscript>Ti<Subscript>20</Subscript> bulk metallic glass rolled at different strain rates

The structural evolution of Cu₆₀Zr₂₀Ti₂₀ bulk metallic glass during rolling at different strain rates and cryogenic temperature was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and high-resolution transmission electron microscopy (HRTEM). It is revealed that the deformation-induced transformation is strongly dependent on the strain rate. At the lowest experimental strain rate of 1.0×10⁻⁴ s⁻¹, no phase transformation occurs until the highest deformation degree reaches 95%. In a strain rate range of 5.0×10⁻⁴−5.0×10⁻² s⁻¹, phase separation occurs in a high deformation degree. As the strain rate reaches 5.0×10⁻¹ s⁻¹, phase separation and nanocrystallization concur. The critical deformation degree for occurrence of phase transformation decreases with the strain rate increasing. Supported by the National Natural Science Foundation of China (Grant No. 50471016)     

Lattice dynamics of Eu<Subscript>1-x</Subscript>Y<Subscript>x</Subscript>MnO<Subscript>3</Subscript> (0 ≤ x ≤ 0.5)

A systematic and detailed study of Raman and infrared active lattice excitations in the orthorhombic multiferroic manganite Eu_1−xY_xMnO₃ (0 ≤ x ≤ 0.5) was carried out at room temperature. For the infrared active phonon modes the eigenfrequencies, damping constants and oscillator strengths were analyzed by Fourier-Transform Infrared Spectroscopy in the far infrared frequency range. For the Raman active phonons the same analysis for eigenfrequencies and damping constants was carried out using Raman spectroscopy in the range from 200 cm⁻¹ to 700 cm⁻¹. Y doping leads to mode-dependent phonon frequency shifts up to 8%. These are interpreted in terms of the interplay between the decrease of the reduced ion masses and the axis-dependent change of bond lengths. The latter leads to a bond softening along the a-axis and a strengthening along the c-axis, for which the highest phonon frequency increase is observed. The application of both Raman and Infrared Spectroscopy gives us sensitivity not only to symmetry properties via the selection rules but also to the involvement of different ion types within the unit cell. It is clearly shown that the disorder induced effects are of minor impact on the lattice properties and solely detected on the rare earth sites. The MnO₆ octahedra remain unaffected and show the same behavior as in the stochiometric RMnO₃ making Eu_1−xY_xMnO₃ an excellent model system for a quasi-continuous fine-tuning of the lattice parameters relevant for the appearance of multiferroicity.     

Optical properties of the ternary compound Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Hg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Se:Co

We present the results of experimental studies of the optical properties of cobalt-doped Cd _x H_1−x Se (x = 0.18) single crystals with cobalt ion concentrations of NCo = 5·10¹⁸, 5·10¹⁹, and 1·10²⁰ cm⁻³ at T = 90 K and 300 K. The composition (x = 0.18) of the Cd _x Hg_1−x Se solid solution was selected so that the hypothetical resonance level is found on the bottom of the conduction band. We show that the cobalt ions in the mercury selenide can form a resonance donor level only for cobalt concentrations N_Co < 5·10¹⁸ cm⁻³. For N_Co ∼ 5·10¹⁸ cm⁻³, the cobalt ions substitute for mercury atoms, forming a solid solution and leading to an increase in the bandgap width and a change in the physical properties. The solubility of cobalt in the HgSe lattice can be greater than 5%–10%. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 1, pp. 73–77, January–February, 2007.     

Effects of MnO<Subscript>2</Subscript> nano-particles on the conductivity of PMMA-PEO-LiClO<Subscript>4</Subscript>-EC polymer electrolytes

Li-ion rechargeable batteries based on polymer electrolytes are of great interest for solid state electrochemical devices nowadays. Many studies have been carried out to improve the ionic conductivity of polymer electrolytes, which include polymer blending, incorporating plasticizers and filler additives in the electrolyte systems. This paper describes the effects of incorporating nano-sized MnO₂ filler on the ionic conductivity enhancement of a plasticized polymer blend PMMA–PEO–LiClO₄–EC electrolyte system. The maximum conductivity achieved is within the range of 10⁻³ S cm⁻¹ by optimizing the composition of the polymers, salts, plasticizer, and filler. The temperature dependence of the polymer conductivity obeys the VTF relationship. DSC and XRD studies are carried out to clarify the complex formation between the polymers, salts, and plasticizer.     

Critical behavior of the heat capacity of the manganite La<Subscript>0.87</Subscript>K<Subscript>0.13</Subscript>MnO<Subscript>3</Subscript>

The heat capacity of the manganite La_0.87K_0.13MnO₃ has been measured in the temperature range 80–350 K. The nature of the ferromagnetic phase transition and the critical properties of heat capacity near the Curie temperature have been studied. The regularities of variations in the universal critical parameters near the phase transition point have been established. The calculated critical exponent and amplitudes of the heat capacity with allowance for corrections on the scaling (α = −0.13 and A ⁺/A ⁻ = 1.178) correspond to the critical behavior of the 3D Heizenberg model.     

Optical absorption in layered MnGaInS<Subscript>4</Subscript> single crystals

Optical absorption in MnGaInS₄ single crystals has been studied. Direct and indirect optical transitions are found to occur in the range of photon energies of 2.37–2.74 eV and in the temperature range of 83–270 K. The temperature dependence of the band gap has been determined; its temperature coefficients E _gd and E _gi are −5.06 × 10⁻⁴ and −5.35 × 10⁻⁴ eV/K, respectively. MnGaInS4 single crystals exhibit anisotropy in polarized light at the absorption edge; the nature of this anisotropy is explained.     

Spectroscopic and structural proprieties of LiAr and LiAr<Subscript>2</Subscript> molecules

We determined and tried to understand the spectroscopic and structural properties of small LiAr and LiAr₂ molecules within a simple model considering LiAr as a result of interaction between a valence electron and a LiAr⁺ molecular ion. Potential energy curves, spectroscopic constants, and vibrational levels corresponding to the Li(2s, 2p, 3s, and 3p)+Ar dissociation are reported for the LiAr molecule. The depth of the potential well for the X ²Σ⁺ ground state is found to be 50 cm⁻¹ (the corresponding experimental value is (42.5±1.2) cm⁻1 [1]). R _e is determined to be 9.36 a.u. (the experimental value is 9.24 a.u.). For the first excited state A, R _e = 4.97 a.u. and D _e = 993cm ⁻¹ (the corresponding experimental values are 4.68 a.u. and (925−40) cm⁻¹, respectively [1]). The spacing between the vibrational levels for the ground and first excited states is in very good agreement with the experiment. For the ground state, the difference between our results and the data of the most recent experiment is about 1 cm⁻¹. The model has been extended to study the LiAr₂ molecule in two forms (linear and triangular). We have determined the potential energy surfaces of the states dissociating to Li(2s, 2p)+Ar₂ and thus found the triangular form to be more stable as compared to the linear one. We have also calculated the transition energy between the ground state and first excited states of this molecule. The emission spectrum of the Li(2s)+Ar₂→Li(2p)+Ar₂ transition in both forms redshifts as compared to the Li(2s)→Li(2p) atomic transition.