Synthesis and characterization of mid‐ and end‐chain functional telechelics by controlled polymerization methods and coupling processes

Well‐defined polystyrene‐ (PSt) or poly(ε‐caprolactone) (PCL)‐based polymers containing mid‐ or end‐chain 2,5 or 3,5‐ dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP) or ring opening polymerization (ROP). 1,4‐Dibromo‐2‐(bromomethyl)benzene, 1,3‐dibromo‐5‐(bromomethyl)benzene, and 1,4‐dibromo‐2,5‐di(bromomethyl)benzene were used as initiators in ATRP of styrene (St) in conjunction with CuBr/2,2′‐bipyridine as catalyst. 2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene initiated the ROP of ε‐caprolactone (CL) in the presence of stannous octoate (Sn(Oct)₂) catalyst. The reaction of these polymers with amino‐ or aldehyde‐functionalized monoboronic acids, in Suzuki‐type couplings, afforded the corresponding telechelics. Further functionalization with oxidable groups such as 2‐pyrrolyl or 1‐naphthyl was attained by condensation reactions of the amino or aldehyde groups with low molecular weight aldehydes or amines, respectively, with the formation of azomethine linkages. Preliminary attempts for the synthesis of fully conjugated poly(Schiff base) with polymeric segments as substituents, by oxidative polymerization of the macromonomers, are presented. All the starting, intermediate, or final polymers were structurally analyzed by spectral methods (¹H NMR, ¹³C NMR, and IR). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 727–743, 2006     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Thermoplastic elastomers based on poly(l‐Lysine)‐Poly(ε‐Caprolactone) multi‐block copolymers

Novel thermoplastic elastomers based on multi‐block copolymers of poly(l ‐lysine) (PLL), poly(N‐ε‐carbobenzyloxyl‐l ‐lysine) (PZLL), poly(ε‐caprolactone) (PCL), and poly(ethylene glycol) (PEG) were synthesized by combination of ring‐opening polymerization (ROP) and chain extension via l ‐lysine diisocyanate (LDI). SEC and ¹H NMR were used to characterize the multi‐block copolymers, with number‐average molecular weights between 38,900 and 73,400 g/mol. Multi‐block copolymers were proved to be good thermoplastic elastomers with Young's modulus between 5 and 60 MPa and tensile strain up to 1300%. The PLL‐containing multi‐block copolymers were electrospun into non‐woven mats that exhibited high surface hydrophilicity and wettability. The polypeptide–polyester materials were biocompatible, bio‐based and environment‐friendly for promising wide applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3012–3018     

Synthesis of poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)] with a reactive group at the poly(ethylene glycol) end and its thermosensitive self‐assembling character

Poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)]s with a reactive group at the poly(ethylene glycol) (PEG) end were synthesized by the radical copolymerization of N‐isopropylacrylamide with a PEG macromonomer having an acetal group at one end and a methacryloyl group at the other chain end. The temperature dependence of the aqueous solutions of the obtained graft copolymers was estimated by light scattering measurements. The intensity of the light scattering from aqueous polymer solutions increased with increasing temperature. In particular, at temperatures above 40°C, the intensity abruptly increased, indicating a phase separation of the graft copolymer due to the lower critical solution temperature (LCST) of the poly(N‐isopropylacrylamide) segment. No turbidity was observed even above the LCST, and this suggested a nanoscale self‐assembling structure of the graft copolymer. The dynamic light scattering measurements confirmed that the size of the aggregate was in the range of several tens of nanometers. The acetal group at the end of the PEG graft chain was easily converted to the aldehyde group by an acid treatment, which was analyzed by ¹H NMR. Such a temperature‐induced nanosphere possessing reactive PEG tethered chains on the surface is promising for new nanobased biomedical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1457–1469, 2006     

The behavior of poly(amino acids) containing l‐cysteine and their block copolymers with poly(ethylene glycol) on gold surfaces

Poly(ethylene glycol) (PEG) is often used to biocompatibilize surfaces of implantable biomedical devices. Here, block copolymers consisting of PEG and l ‐cysteine‐containing poly(amino acid)s (PAA's) were synthesized as polymeric multianchor systems for the covalent attachment to gold surfaces or surfaces decorated with gold nanoparticles. Amino‐terminated PEG was used as macroinitiator in the ring‐opening polymerization, (ROP), of respective amino acid N‐carboxyanhydrides (NCA's) of l ‐cysteine (l ‐Cys), l ‐glutamate (l ‐Glu), and l ‐lysine (l ‐Lys). The resulting block copolymers formed either diblock copolymers, PEG‐b‐p(l ‐Glu_x‐co‐l ‐Cys_y) or triblock copolymers, PEG‐b‐p(l ‐Glu)_x‐b‐p(l ‐Cys)_y. The monomer feed ratio matches the actual copolymer composition, which, together with high yields and a low polydispersity, indicates that the NCA ROP follows a living mechanism. The l ‐Cys repeat units act as anchors to the gold surface or the gold nanoparticles and the l ‐Glu repeat units act as spacers for the reactive l ‐Cys units. Surface analysis by atomic force microscopy revealed that all block copolymers formed homogenous and pin‐hole free surface coatings and the phase separation of mutually immiscible PEG and PAA blocks was observed. A different concept for the biocompatibilization of surfaces was followed when thiol‐terminated p(l ‐Lys) homopolymer was first grafted to the surface and then covalently decorated with HOOC‐CH₂‐PEG‐b‐p(Bz‐l ‐Glu) polymeric micelles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 248–257     

Investigation of catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Kumada‐Tamao coupling polymerization of 1,4‐dialkoxy‐2‐bromo‐5‐(2‐chloromagnesiovinyl)benzene ( 1 ) and 1,4‐dialkoxy‐2‐(2‐bromovinyl)‐5‐chloromagnesiobenzene ( 2 ) with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of 2‐{2‐[(2,5‐dialkoxy‐4‐iodophenyl)]vinyl}‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane ( 3 ), its bromo counterpart 4 , and 2,5‐dialkoxy‐4‐(2‐bromovinyl)phenylboronic acid ( 5 ) with a Pd initiator were investigated under catalyst‐transfer condensation polymerization conditions for the synthesis of well‐defined poly(p‐phenylenevinylene) (PPV). The Kumada‐Tamao polymerization of vinyl Grignard‐type monomer 1 with Ni(dppp)Cl₂ at room temperature did not proceed, whereas aryl Grignard‐type monomer 2 afforded oligomers of low molecular weight. Matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectra of the polymer obtained from 2 implied that the Grignard end group reacted with tetrahydrofuran to terminate polymerization. On the other hand, Suzuki‐Miyaura polymerization of vinyl boronic acid ester type monomers 3 and 4 and phenylboronic acid type monomer 5 with a Pd initiator and aqueous KOH at ?20 °C to room temperature yielded the corresponding PPV with high molecular weight within a few minutes. However, the molecular weight distribution was broad, and MALDI‐TOF mass spectra showed the peaks of polymers bearing no initiator unit at the chain end, as well as those of polymers with the initiator unit. These results indicated that intermolecular chain transfer of the Pd catalyst occurred. Dehalogenation and disproportionation of the growing end also took place as side reactions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2643‐2653     

Synthesis of well‐defined star‐shaped poly(ε‐caprolactone)/poly(ethylbene glycol) amphiphilic conetworks by combination of ring opening polymerization and “click” chemistry

Well‐defined star‐shaped hydrophobic poly(ε‐caprolactone) (PCL) and hydrophilic poly(ethylene glycol) (PEG) amphiphilic conetworks (APCNs) have been synthesized via the combination of ring opening polymerization (ROP) and click chemistry. Alkyne‐terminated six arm star‐shaped PCL (6‐s‐PCLx‐C?CH) and azido‐terminated PEG (N₃‐PEG‐N₃) are characterized by ¹H NMR and FT‐IR. The swelling degree of the APCNs is determined both in water and organic solvent. This unique property of the conetworks is dependent on the nanophase separation of hydrophilic and hydrophobic phases. The morphology and thermal behaviors of the APCNs are investigated by SEM and DSC respectively. The biocompatibility is determined by water soluble tetrazolium salt reagents (WST‐1) assay, which shows the new polymer networks had good biocompatibility. Through in vitro release of paclitaxel (PTX) and doxorubicin (DOX), the APCNs is confirmed to be promising drug depot materials for sustained hydrophobic and hydrophilic drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 407–417     

Comparison of micelles formed by amphiphilic star block copolymers prepared in the presence of a nonmetallic monomer activator

In this article, we describe the synthesis of PEG‐b‐polyester star block copolymers via ring‐opening polymerization (ROP) of ester monomers initiated at the hydroxyl end group of the core poly(ethylene glycol) (PEG) using HCl Et₂O as a monomer activator. The ROP of ε‐caprolactone (CL), trimethylene carbonate (TMC), or 1,4‐dioxan‐2‐one (DO) was performed to synthesize PEG‐b‐polyester star block copolymers with one, two, four, and eight arms. The PEG‐b‐polyester star block copolymers were obtained in quantitative yield, had molecular weights close to the theoretical values calculated from the molar ratio of ester monomers to PEG, and exhibited monomodal GPC curves. The crystallinity of the PEG‐b‐polyester star block copolymers was determined by differential scanning calorimetry and X‐ray diffraction. Copolymers with a higher arm number had a higher tendency toward crystallization. The crystallinity of the PEG‐b‐polyester star block copolymers also depended on the nature of the polyester block. The CMCs of the PEG‐b‐PCL star block copolymers, determined from fluorescence measurements, increased with increasing arm number. The CMCs of the four‐arm star block copolymers with different polyester segments increased in the order 4a‐PEG‐b‐PCL < 4a‐PEG‐b‐PDO < 4a‐PEG‐b‐PLGA < 4a‐PEG‐b‐PTMC, suggesting a relationship between CMC and star block copolymer crystallinity. The partition equilibrium constant, K_v, which is an indicator of the hydrophobicity of the micelles of the PEG‐polyester star block copolymers in aqueous media, increased with decreasing arm number and increasing crystallinity. A key aspect of the present work is that we successfully prepared PEG‐b‐polyester star block copolymers by a metal‐free method. Thus, unlike copolymers synthesized by ROP using a metal as the monomer activator, our copolymers do not contain traces of metals and hence are more suitable for biomedical applications. Moreover, we confirmed that the PEG‐b‐polyester star block copolymers form micelles and hence may be potential hydrophobic drug delivery vehicles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2084–2096, 2008     

3‐miktoarm star terpolymers using triple click reactions: Diels–Alder,copper‐catalyzed azide‐alkyne cycloaddition,and nitroxide radical coupling reactions

Well‐defined linear furan‐protected maleimide‐terminated poly(ethylene glycol) (PEG‐MI), tetramethylpiperidine‐1‐oxyl‐terminated poly(ε‐caprolactone) (PCL‐TEMPO), and azide‐terminated polystyrene (PS‐N₃) or ‐poly(N‐butyl oxanorbornene imide) (PONB‐N₃) were ligated to an orthogonally functionalized core ( 1 ) in a two‐step reaction mode through triple click reactions. In a first step, Diels–Alder click reaction of PEG‐MI with 1 was performed in toluene at 110 °C for 24 h to afford α‐alkyne‐α‐bromide‐terminated PEG (PEG‐alkyne/Br). As a second step, this precursor was subsequently ligated with the PCL‐TEMPO and PS‐N₃ or PONB‐N₃ in N,N‐dimethylformamide at room temperature for 12 h catalyzed by Cu(0)/Cu(I) through copper‐catalyzed azide‐alkyne cycloaddition and nitroxide radical coupling click reactions, yield resulting ABC miktoarm star polymers in a one‐pot mode. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

PEG–PLGA copolymers bearing carboxylated side chains: Novel hydrogels with enhanced crosslinking via ionic interactions

Novel water‐soluble amphiphilic block copolymers with pendant carboxylic acid groups are synthesized and used for the preparation of ionically crosslinked hydrogels. d ,l ‐Lactide (DLLA) and l ?3‐(2‐benzyloxycarbonyl)ethyl‐1,4‐dioxane‐2,5‐dione (BED) are copolymerized at different ratios via organo‐catalyzed ring‐opening polymerization using a hydroxyl‐terminated poly(ethylene glycol) (PEG–OH) macroinitiator. Dynamic light‐scattering experiments show that, at low concentrations, aqueous solutions of these PEG‐P(BED‐DLLA) copolymers form micelles and aggregates. At higher concentrations, thermo‐sensitive gels are obtained, exhibiting a reversible gel‐to‐sol transition upon a temperature increase. Ionic interactions between the COOH groups and metal ions (Cu²⁺ or Ca²⁺) are shown to significantly shift the gel–sol transition to higher temperatures. Thus, the introduction of COOH groups significantly enhances the water solubility of the amphiphilic PEG–polyester copolymer and allows additional crosslinking interactions to form functionalized hydrogels with improved physical properties, making this new class of hydrogels interesting for various applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1222–1227     

Postfunctionalization of polyoxanorbornene backbone through the combination of bromination and nitroxide radical coupling reactions

The brominated backbone of poly(oxanorbornene imide) (PONB) (PONB‐Br) was functionalized with 2,2,6,6‐tetramethylpiperidine 1‐oxyl (TEMPO)‐acrylate, ‐epoxy, and poly (ethylene glycol) (PEG) yielding PONB‐acrylate, PONB‐epoxy, and PONB‐PEG through the nitroxide radical coupling (NRC) reaction. Although an excess amount of functional‐TEMPOs were used. The observed NRC efficiencies were found in the range of 7–25%. Notably, ¹H NMR spectra of all polymers exhibited a signal at 6.08 ppm after NRC reactions indicating rebuilding of the main chain double bond and further identified by ¹³C NMR analysis. The inevitable formation of double bond through the tendency of the recombination of the formed radicals was supported by a separate experiment conducted without utilizing functional‐TEMPO. Besides, the versatility of the ROMP backbone further demonstrated by the introduction hetero functionality onto the polymer by a consecutive reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2381–2389     

Preparation of hybrid triple‐stimuli responsive nanogels based on poly(L‐histidine)

A series of novel multi‐responsive disulfide cross‐linked polypeptide nanogels has been synthesized by a one‐step ring‐opening polymerization process. The pH‐responsive core of the prepared nanogels was based on poly(L‐histidine), the difunctional N‐carboxy anhydride of l ‐cystine (l ‐Cys‐NCA) was used as a reduction‐cleavable cross‐linking agent, while the outer hydrophilic corona was comprised of a poly(ethylene oxide) block. Extensive molecular characterization studies were conducted in order to confirm the formation of the desired polymeric nanostructures and also to prove their responsiveness to external stimuli within the physiological values of healthy and cancer tissues. Furthermore, the disruption of the disulfide‐bond linkages between the polymeric chains was achieved by the presence of the reductive tripeptide glutathione (GSH), leading to size variations that were monitored by dynamic light scattering (DLS) and size‐exclusion chromatography (SEC). “Stealth” properties of the formed nanostructures were examined by zeta potential measurements. The described nanogels are clearly promising candidates for drug delivery applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1278–1288     

Synthesis of poly(p‐phenylene) macromonomers and multiblock copolymers

Rigid‐rod poly(4′‐methyl‐2,5‐benzophenone) macromonomers were synthesized by Ni(0) catalytic coupling of 2,5‐dichloro‐4′‐methylbenzophenone and end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. The macromonomers produced were labile to nucleophilic aromatic substitution. The molecular weight of poly(4′‐methyl‐2,5‐benzophenone) was controlled by varying the amount of the end‐capping agent in the reaction mixture. Glass‐transition temperatures of the macromonomers increased with increasing molecular weight and ranged from 117 to 213 °C. Substitution of the macromonomer end groups was determined to be nearly quantitative by ¹H NMR and gel permeation chromatography. The polymerization of a poly(4′‐methyl‐2,5‐benzophenone) macromonomer [number‐average molecular weight (M_n) = 1.90 × 10³ g/mol; polydispersity (M_w)/M_n = 2.04] with hydroxy end‐capped bisphenol A polyaryletherketone (M_n = 4.50 × 10³ g/mol; M_w/M_n = 1.92) afforded an alternating multiblock copolymer (M_n = 1.95 × 10⁴ g/mol; M_w/M_n = 6.02) that formed flexible, transparent films that could be creased without cracking. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3505–3512, 2001     

FT‐IR characterization and hydrolysis of PLA‐PEG‐PLA based copolyester hydrogels with short PLA segments and a cytocompatibility study

A series of the biodegradable copolyester hydrogels was prepared using a redox‐initiated polymerization with a constant 1:9 mole ratio of the Boltorn‐based acrylate and diacrylate triblock comacromonomers. The Boltorn® macromonomer was derived from the hyperbranched polyester Boltorn H20, which was functionalized at each terminus with poly(ethylene glycol) acrylate, and the diacrylate triblock macromonomer was poly (lactide‐b‐ethylene glycol‐b‐lactide) diacrylate. The hydrolysis of the copolyesters at pH 7.4 in a phosphate buffered saline solution at 37 °C was studied using ATR‐FTIR spectroscopy. It was found that the presence of the Boltorn, the PEG, and lactide block lengths both play vital roles in determining the structure‐property relationships in these materials. The ATR‐FTIR studies showed that with increasing lactide segment length, the rate of ester hydrolysis increased due to the increased concentration of the hydrolytically sensitive poly(lactic acid) (PLA) ester groups in the network. However, incorporation of Boltorn into the PLA‐PEG‐PLA copolymer did not significantly change the kinetic rate constant for hydrolysis of the PLA segments. The cytocompatibility of a typical one of these materials in the presence of its degradation by‐products was assessed using cultured osteoblasts from the rat. The hydrogel was degraded for 28 days and found to be cytocompatible with osteoblasts over days 23 to 28 of the hydrolysis period. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5163–5176     

Random terpolymers for electroluminescent devices: Synthesis and characterization of new cyano‐containing poly(fluorenylene‐vinylene)s

The synthesis of new random poly(2,7‐fluorenylene‐vinylene)s was achieved by a Suzuki–Heck cascade polymerization reaction. The poly(fluorenylene‐vinylene) base structure was modified by the regio‐random incorporation of 1‐cyano‐2,5‐phenylene as electron withdrawing unit ( CN‐PFV1 ) and its properties were compared with terpolymers also embodying 1,4‐dioctyloxy‐2,5‐phenylene ( CN‐PFV2 ) or 3,6‐N‐octylcarbazole ( CN‐PFV3 ) as electron‐donating moieties. Thermal analysis revealed a high thermal stability (T_d > 389 °C) and the absence of glass transitions for all polymers. Cyclic voltammetry indicated a high electron affinity of the materials (2.96–3.21 eV) attributed to the presence of the cyano‐containing comonomer. In dilute solutions, the copolymers showed a broad green fluorescence with quantum yields ranging from 0.42 to 0.79, while in the solid state, a relatively narrow emission centered at ～ 560 nm, governed by the low‐energy segments within the π‐conjugated backbone, was observed. The electroluminescence properties of the materials were tested in OLED devices of ITO/PEDOT‐PSS/ CN‐PFV1‐3 /Ca/Al or ITO/PEDOT‐PSS/ CN‐PFV1‐3 /Alq₃/Ca/Al configurations, showing a bright green‐yellow emission that, in the case of CN‐PFV2 , reached 1403 cd/m² with efficiencies as high as 0.13 cd/A. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6051–6063, 2008     

Polymerizability of Exo‐methylene‐lactide toward vinyl addition and ring opening

This work examines the stereochemical control and polymerizability of exo‐methylene‐lactide (MLA) or (6S)‐3‐methylene‐6‐methyl‐1,4‐dioxane‐2,5‐dione, a chiral monomer derived from l ‐lactide, toward vinyl‐addition and ring‐opening polymerization (ROP) pathways, respectively. Currently, no information on the stereochemistry of the vinyl‐addition polymerization of MLA is known, and the possible ROP pathway is unexplored. Accordingly, this work first investigated the stereochemical control and other characteristics of the radical polymerization of MLA and its copolymerization with an analogous exo‐methylene‐lactone, γ‐methyl‐α‐methylene‐γ‐butyrolactone (MMBL), and di‐methylene‐lactide (DMLA) or 3,6‐dimethylene‐1,4‐dioxane‐2,5‐dione. The MLA homopolymerization produced optically active, but atactic, vinyl‐type polymers having a specific rotation of [α]²³_D = ?42 ± 4°, a high T_g from 229 to 254 °C, and a medium (M_w = 76.3 kg/mol, ? = 1.16) to high (M_w = 358 kg/mol, ? = 2.83) molecular weight, depending on the solvent. The copolymerization of MLA with MMBL afforded copolymers exhibiting enhanced thermal stability, while its copolymerization with DMLA led to cross‐linked polymers. The results obtained from the model reactions designed to probe the possible ROP indicate that the nonpolymerizability of MLA by initiators or catalysts comprising acidic, protic, and/or nucleophilic reagents is due to the high sensitivity of MLA toward such common ROP reagents that trigger decomposition or other types of transformations of MLA forming nonpolymerizable derivatives. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1523–1532     

Rapid metal‐free macromolecular coupling via In Situ nitrile oxide‐activated alkene cycloaddition

Nitrile oxide 1,3 dipolar cycloaddition is a simple and powerful coupling methodology. However, the self‐dimerization of nitrile oxides has prevented the widespread use of this strategy for macromolecular coupling. By combining an in situ nitrile oxide generation with a highly reactive activated dipolarophile, we have overcome these obstacles and present a metal‐free macromolecular coupling strategy for the modular synthesis of several ABA triblock copolymers. Nitrile oxides were generated in situ from chloroxime terminated poly(dimethylsiloxane) B‐blocks and coupled with several distinct hydrophilic (poly(2‐methyloxazoline) and poly(ethylene glycol)), and poly(N‐isopropylacrylamide) or hydrophobic (poly(l ‐lactide) A‐blocks terminated in activated dipolarophiles in a rapid fashion with high yield. This methodology overcomes many drawbacks of previously reported metal‐free methods due to its rapid kinetics, versatility, scalability, and ease of introduction of necessary functionality. Nitrile oxide cycloaddition should find use as an attractive macromolecular coupling strategy for the synthesis of biocompatible polymeric nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3134–3141     

Photochemical stability of dicyano‐substituted poly(phenylenevinylenes) with different side chains

The photodegradation mechanism study has been conducted on poly(2,5‐dioctyl‐1,4‐phenylene‐1,2‐dicyanovinylene) (C8‐diCN‐PPV) and poly[2,5‐bis(decyloxy)?1,4‐phenylene‐1,2‐dicyanovinylene] (ROdiCN‐PPV) to understand the reason behind the faster photodegradation of C8‐diCN‐PPV which has a lower LUMO. In both polymers, radical superoxide anion mechanism, which is responsible for electron‐rich RO‐PPVs, is found to be energetically unfavorable for both diCN‐PPVs due to diCN substitution. The IR analysis results confirm this and suggest that singlet oxygen (O₂) is the main culprit for photodegradation of both polymers, which cleaves the C?C bonds into carboxylic acids. The rates of MW reduction (by GPC) and increase in carbonyl IR absorption intensity are in excellent agreement for both polymers. Phosphorescence study indicates that the faster photodegradation of C8‐diCN‐PPV is due to intersystem crossing, which helps generate singlet O₂ upon photoexcitation. No phosphorescence was detected in RO‐diCN‐PPV, suggesting that inefficient intersystem crossing makes RO‐diCN‐PPV photochemically more stable. This work shows that a small difference in side chain structure can lead to a significant difference in photochemical stability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2820–2828     

The effect of hydrogen bonding on the physical and mechanical properties of rigid‐rod polymers

The idea of competing effects between intramolecular and intermolecular hydrogen bonding was investigated. Results indicate that the formation of one type of hydrogen bond does not preclude the formation of the other. The strength of the intermolecular association was measured by ab initio calculations for several polymer systems, including methyl pendant poly(p‐phenylene benzobisimidazole) and poly‐{2,6‐diimidazo[4,5‐b:4′5′‐e]pyridinylene‐1,4(2,5‐dihydroxy)phenylene} (PIPD). Fibers with strong intermolecular association have high compressive strength and torsional modulus. The influence of intermolecular hydrogen bonding on torsional modulus is discussed in light of the transverse texture present in poly(p‐phenylene terephthalamide) and some other high‐performance fibers. Enhanced intermolecular interaction not only influences the aforementioned properties but also results in higher fiber density. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3053–3061, 2000     

New polyphenylene‐g‐polystyrene and polyphenylene‐g‐polystyrene/poly(ε‐caprolactone) copolymers by combined controlled polymerization and cross‐coupling processes

1,4‐Dibromo‐2‐(bromomethyl)benzene and 1,3‐dibromo‐5‐(bromomethyl)benzene were used as initiators in the atom transfer radical polymerization of styrene in conjunction with CuBr/2,2′‐bipyridine as a catalyst. The resulting polystyrene (PSt)‐based macromonomers, possessing at one end a 2,5‐dibromophenylene or 3,5‐dibromophenylene moiety, were used in combination with 2,5‐dihexylbenzene‐1,4‐diboronic acid for Suzuki coupling in the presence of Pd(PPh₃)₄ as a catalyst or with the system NiCl₂/2,2′‐bipyridine/triphenylphosphine/Zn for Yamamoto polymerization. Polyphenylenes (PPs) with PSt chains as substitution groups were obtained. The same macromonomers were used in Yamamoto copolycondensation reactions, in combination with a poly(ε‐caprolactone) (PCL) macromonomer, and this resulted in PPs with PSt/PCL side chains. The obtained PPs had good solubility properties in common organic solvents at room temperature similar to those of the starting macromonomers. The new polymers were characterized with ¹H (¹³C) NMR, IR, and gel permeation chromatography. The optical properties of the polymers were monitored with UV and fluorescence spectroscopy. The thermal behaviors of the macromonomers and final PPs were investigated with differential scanning calorimetry and compared. The morphology of PPs containing PSt and PCL blocks was characterized with atomic force microscopy, and a microphase‐separated layered morphology was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 879–896, 2005