Dynamic phase transition behavior and unusual hydration process in poly(ethylene oxide)‐b‐poly(N‐vinylcaprolactam) aqueous solution

Dynamic phase transition and self‐assembly mechanism of thermosensitive poly(ethylene oxide)‐b‐poly(N‐vinylcaprolactam) (PEO‐b‐PVCL) copolymer are explored deeply. A gradual dehydration process with predominated hydrophobic interactions among copolymer chains in the phase transition process distinguishes the copolymer from homopolymer. PVCL in the inner zone is restricted and counter‐balanced by the PEO segments based on the sequence order of representative groups during the heating‐cooling cycles. Remarkably, PEO shell experiences unusual hydration process, which is first discovered. This hydrophilic shell plays as water absorption sponge layer and captures expelled water from PVCL core, accompanied by gradient distribution of water existed in the assembly structures. Peculiarly, pseudo‐linear changes of the integral area of free C?O are presented compared with inflection point in the hydrated C?O integral area, which propose that a part of hydrated C?O forms incomplete dehydrated states. During the cooling process, perfect reversibility is observed without obvious hysteresis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 385–396     

Design of a novel co‐electrospinning system with flat spinneret for producing helical nanofibers

A kind of biomimetic fibers of helical structures at nanoscale has attracted increasing interest. In this study, a novel co‐electrospinning setup with a designed flat spinneret, used for the fabrication of helical nanofibers, is reported in this study. Poly(m‐phenylene isophthalamide) (Nomex) and Thermoplastic polyurethane (TPU) are chosen as the two components in co‐electrospinning. To display the efficiency for producing helical fibers, a generally used core–shell needle spinneret is used for comparison. The effect of the uniformity of electric field distribution created by these two types of spinnerets on the jet motion and the resultant helical fibers is developed, with systematical simulation and experimental research. The results showed that the co‐electrospinning system with the newly designed flat spinneret can produce helical nanofibers efficiently. Compared with the needle spinneret, the flat spinneret created more uniform electric field, leading to better morphology and structure of the resultant helical fibers. In addition, an approach to achieve the scale‐up of this co‐electrospinning system is developed. This novel design is expected to provide a promising method to fabricate nanofiber materials with helical structures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1496–1505     

Crystal transition from hydrated chitosan and chitosan/monocarboxylic acid complex to anhydrous chitosan investigated by X‐ray diffraction

We have studied the crystal transition behaviors from hydrated chitosan to anhydrous chitosan by X‐ray diffraction analyses. Hydrated chitosan prepared by deacetylation of crustacean α‐chitin was subjected to the two conversion methods, hydrothermal treatment and high‐humidity treatment via chitosan/monocarboxylic acid complex. The transition by hydrothermal treatment progressed with increasing treatment temperature and time, and the rapid transition occurred above 200 °C. Chitosan/acetic acid complex and chitosan/formic acid complex were prepared by immersing hydrated chitosan in acid solution. The transition from chitosan/acetic acid complex to anhydrous chitosan in high relative humidity condition proceeded with increasing temperature and was complete at 80 °C for 1 h, whereas chitosan/formic acid complex did not convert to anhydrous chitosan under the same conditions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1065–1069     

Electrospinning of composite nanofibers based on chitosan,poly(ethylene oxide), and chitin nanofibrils

Composite chitosan nanofibers containing 20 wt % chitin nanofibrils and 10 wt % PEO are obtained via the electrospinning method. Additions of 0.5–20.0 wt % chitin nanofibrils into chitosan solutions with concentrations of 3–7 wt % in acetic acid (70 vol %) insignificantly increase the electrical conductivity, surface-tension coefficient, and viscosity of these mixed solutions. Decreases in the viscosities of chitosan solutions containing chitin nanofibrils with increases in shear rate provide evidence for the structuring of solutions and the orientation of chitosan macromolecules and chitin nanofibrils in the shear flow. The effects of shear stress and a high-voltage electric field on chitosan solutions containing chitin nanofibrils and PEO result in a decrease in the imperfection of composite nanofibers. The introduction of chitin nanofibrils allows the content of PEO in the composite nanofibers to be reduced.     

Characterization of the stable and metastable poly(ethylene oxide)–urea complexes in electrospun fibers

Solution electrospinning was used for the first time to prepare nanofibers of the stable (α) and metastable (β) complexes between poly(ethylene oxide) (PEO) and urea. Both types of fibers were highly crystalline and presented a large level of molecular orientation. Detailed characterization of the ill‐studied β complex was performed using wide angle X‐ray diffraction (WAXD), infrared spectroscopy, and differential scanning calorimetry (DSC). Results reveal that it possesses a 3:2 PEO:urea stoichiometry and suggest that it belongs to the orthorhombic system with a = 1.907 nm, b = 0.862 nm, and c = 0.773 nm. The PEO chains are oriented along the fiber axis and present a conformation significantly affected by strong hydrogen bonding with urea when compared with the pure polymer and the stable complex. A layered structure model is suggested for the metastable complex, in which the urea molecules would be arranged into a ribbon‐like structure intercalated between two PEO layers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1903–1913, 2008     

Solution‐blown nylon 6–chitosan core–shell nanofiber for highly efficient affinity adsorption

A facile spinning‐based strategy was developed to fabricate chitosan (CS) surface nanofiber‐based affinity membranes for protein adsorption. The core–shell nanofiber mat of nylon 6–CS was prepared via coaxial solution blowing process. The nanofibers have a diameter range of 60–300 nm. The core–shell structure was confirmed by transmission electron microscopy, and CS was observed as a thin layer that uniformly adhered to the core. The dye ligand of cibacron blue F3GA (CB F3GA) was further covalently immobilized on the nanofibers with a content of 425 µmol/g. The pristine and CB F3GA‐attached mats were studied in protein adsorption. High bovine serum albumin adsorption capacities of 91.9 and 219.6 mg/g were obtained for pristine and CB F3GA‐attached mats, respectively. Given its properties of high flux rate and low pressure drop, CB F3GA‐attached nylon 6–CS nanofiber mat meets the requirements of highly effective affinity membrane chromatography. Copyright © 2016 John Wiley & Sons, Ltd.     

Azide‐functionalized nanoparticles as quantized building block for the design of soft–soft fluorescent polystyrene core—PAMAM shell nanostructures

This work deals with the covalent coupling of azide‐functionalized polymeric nanoparticles as a reactive core and amino‐terminated PAMAM dendrons as a reactive shell. The nanoassemblies thereby obtained could be modified after the dendronization step by grafting an alkynyl Bodipy dye on the unreacted azide moieties. Only a few steps are required to attain nanoassemblies that could mimic dendrimers of high generation with sizes of nano‐objects beyond those of dendrimers. The structure of the nanoassemblies are composed of a polystyrene core, an inner shell including the Bodipy dyes along with the internal branches of the PAMAM, and the terminal amino groups from the outer shell. The dendritic shell acts as a protective layer that prevents NP from aggregation in a surfactant free aqueous solution. The nano‐objects display absorption and emission maxima above 500 nm with brightness that are the same order of magnitude than Qdots. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 115–126     

Facile synthesis of core‐surface crosslinked nanoparticles by interblock RAFT polymerization

A new, efficient method for synthesizing stable nanoparticles with poly(ethylene oxide) (PEO) functionalities on the core surface, in which the micellization and crosslinking reactions occur in one pot, has been developed. First, amphiphilic PEO‐b‐PS copolymers were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization of styrene using (PEO)‐based trithiocarbonate as a macro‐RAFT agent. The low molecular weight PEO‐b‐PS copolymer was dissolved in isopropyl alcohol where the block copolymer self‐assembled as core‐shell micelles, and then the core‐shell interface crosslink was performed using divinylbenzene as a crosslinking agent and 2,2′‐azobisisobutyronitrile as an initiator. The design of the amphiphilic RAFT agent is critical for the successful preparation of core‐shell interface crosslinked micellar nanoparticles, because of RAFT functional groups interconnect PEO and polystyrene blocks. The PEO functionality of the nanoparticles surface was confirmed by ¹H NMR and FTIR. The size and morphology of the nanoparticles was confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic laser light scattering analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Double‐layered composite nanofibers and their mechanical performance

Continuous polymer nanofibers are available through electrospinning, but most have the same structure in their cross section. This article focuses on the fabrication and the structural and mechanical characterization of pencil‐like double‐layered composite nanofibers coaxially electrospun from solutions of two different biodegradable materials, i.e., gelatin and poly(ε‐caprolactone) (PCL). Transmission electron microscopy and water contact angle measurements confirmed that a gelatin inner fiber was wrapped with a PCL outer layer. Possible applications of such nanofibers include a controlled degradation rate when used as a medical device in human body. It has been found that the tensile performance of the composite nanofibers was better than those of both the pure constituent, i.e. gelatin and PCL, nanofibers alone. The ultimate strength and ultimate strain of the composite nanofibers with 7.5% w/v gelatin in the core and 10% w/v PCL as shell were at least 68% and 244% higher, respectively, than those of the same concentration pure gelatin and PCL nanofibers. Thus, a coaxial electrospinning technique as used in this article can be applicable, not only in developing functionalized nanofibers but also in elevating their mechanical property. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2852–2861, 2005     

Immiscible polydiene blocks in linear copolymer and terpolymer sequences

Synthesis, molecular, and morphological characterization of two linear diblock copolymers consisting of two polydienes with specific geometric isomerisms and two triblock terpolymers with a combination of the same polydienes with polystyrene are investigated for both lower and very high molecular weights. This work is inspired from a previous research study which demonstrated that linear ABC terpolymers consisting of polystyrene, poly(butadiene), and poly(isoprene), with specific geometric isomerisms for the polydienes, lead to 3‐phase microphase separated systems. We report also the coexistence of the core‐shell double gyroid and the 3‐phase 4‐layer alternating lamellae morphologies with the majority fraction being the lamellar structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1238–1246     

Atmospheric plasma treatment of pre‐electrospinning polymer solution: A feasible method to improve electrospinnability

The electrospinnability of polyethylene oxide (PEO) was manipulated by atmospheric plasma treatment of pre‐electrospinning solutions. Conductivity, viscosity, and surface tension of PEO solutions increased after plasma treatment, and the plasma effect remained longer when the solution concentrate increased. Both untreated and treated solutions were then electrospun, and the morphology of the resultant nanofibers was observed by SEM. Atmospheric plasma treatment improved the electrospinnability of PEO solutions and led to less beads and finer diameter distribution in the resultant nanofibers. Additionally, plasma treatment of the pre‐electrospinning solutions affected the crystal structure of resultant nanofibers. These results suggest that atmospheric plasma treatment is a feasible approach to improve the electrospinnability of polymer solutions and can used to control the structure of electrospun nanofibers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Preparation and characterization of chitosan‐graft‐poly (ϵ‐caprolactone) with an organic catalyst

Chitosan‐graft‐poly(ϵ‐caprolactone) was prepared via the ring‐opening graft polymerization of ϵ‐caprolactone (CL) through chitosan with 4‐dimethylaminopyridine as a catalyst and water as a swelling agent. The graft content of PCL within the graft copolymer was adjusted by the feed ratio of CL to chitosan, and the highest grafting concentration of PCL was up to about 400%. Fourier transform infrared, ¹H NMR, and two‐dimensional heteronuclear single quantum coherence analyses indicated that the amino group (NH₂ CH‐2) of chitosan initiated the graft polymerization of CL through the backbone of chitosan, and the hydroxyl group (HO CH_2–6) of chitosan did not participate in initiating the graft polymerization. The percentage of amino groups initiating the graft polymerization decreased with an increasing molar ratio of CL to chitosan in the feed, and this was attributed to the fact that the graft polymerization system increasingly became heterogeneous with an increasing feed ratio of CL to chitosan. The physical properties of the graft copolymers were characterized by thermogravimetric analysis and wide‐angle X‐ray diffraction, respectively. These suggested that the introduction of PCL grafts through the chitosan backbone would to some extent destroy the crystalline structure of chitosan, and the PCL grafts existed in an amorphous structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5353–5361, 2006     

Kinetic study of chitosan‐tripolyphosphate complex reaction and acid‐resistive properties of the chitosan‐tripolyphosphate gel beads prepared by in‐liquid curing method

Chitosan gel beads were prepared using an in‐liquid curing method by the ionotropic crosslinking with sodium tripolyphosphate. Crosslinking characteristics of the chitosan‐TPP beads were improved by the modification of in‐liquid curing mechanism of the beads in TPP solution. Chitosan gel beads cured in pH value lower than 6 were really ionic‐crosslinking controlled, whereas chitosan gel beads cured in pH values higher than 7 were coacervation‐phase inversion controlled accompanied with slightly ionic‐crosslinking dependence. According to the result, significantly increasing the ionic‐crosslinking density of chitosan beads could be achieved by transferring the pH value of the curing agent, TPP, from basic to acidic. The swelling behavior of various chitosan beads in acid appeared to depend on the ionic‐crosslinking density of the chitosan‐TPP beads that were deeply affected by the curing mechanism of the beads. The mechanism of chitosan‐TPP beads swollen in weak acid was chain‐relaxation controlled, while the mechanism of chitosan‐TPP beads swollen in strong acid seem to be not only chain‐relaxation but also chain‐scission controlled. Chitosan‐TPP beads prepared in acidic TPP solution decreased the chain‐scission ability due to the increase of ionic crosslinking density of the beads. By the transition of curing mechanism, the swelling degree of chitosan‐TPP beads was depressed, and the disintegration of chitosan‐TPP beads would not occur in strong acid. The mechanism of ionic‐crosslinking reaction of chitosan beads could be investigated by an unreacted core model, and the curing mechanism of the chitosan beads is mainly diffusion controlled when higher than 5% of chitosan was employed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1551–1564, 1999     

Composite ultrafiltration membranes with tunable properties based on a self‐assembling block copolymer/homopolymer system

Composite ultrafiltration membranes were fabricated by coating a thin film of self‐assembling polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) block copolymers and poly(acrylic acid) homopolymers on top of a support membrane. Block copolymers self‐assembled into a nanostructure where the minority component forms cylinders, whereas homopolymers reside in the core of the cylinders. Selective removal of the homopolymers led to the formation of pores. The morphology of the polymer layer was controlled by varying the content of homopolymers or polymer concentration of the coating solution, which led to membranes with different molecular weight cutoffs (MWCOs) and permeabilities. Uniform pores were obtained using low homopolymer contents, whereas high homopolymer contents caused macrophase separation and resulted in large polydisperse pores or craters at the surface. The thickness of the block copolymer film also influenced the structure and performance of the membranes, where a thicker film results in a strong decrease in permeability but a lower MWCO. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1546–1558     

Hyaluronic Acid (HA)‐Based Silk Fibroin/Zinc Oxide Core–Shell Electrospun Dressing for Burn Wound Management

Burn injuries represent a major life‐threatening event that impacts the quality of life of patients, and places enormous demands on the global healthcare systems. This study introduces the fabrication and characterization of a novel wound dressing made of core–shell hyaluronic acid–silk fibroin/zinc oxide (ZO) nanofibers for treatment of burn injuries. The core–shell configuration enables loading ZO—an antibacterial agent—in the core of nanofibers, which in return improves the sustained release of the drug and maintains its bioactivity. Successful formation of core–shell nanofibers and loading of zinc oxide are confirmed by transmission electron microscopy, Fourier‐transform infrared spectroscopy, and energy dispersive X‐ray. The antibacterial activity of the dressings are examined against Escherichia coli and Staphylococcus aureus and it is shown that addition of ZO improves the antibacterial property of the dressing in a dose‐dependent fashion. However, in vitro cytotoxicity studies show that high concentration of ZO (>3 wt%) is toxic to the cells. In vivo studies indicate that the wound dressings loaded with ZO (3 wt%) substantially improves the wound healing procedure and significantly reduces the inflammatory response at the wound site. Overall, the dressing introduced herein holds great promise for the management of burn injuries.     

Preparation and properties of ionically cross‐linked chitosan nanoparticles

Chitosan nanoparticles were fabricated by a method of tripolyphosphate (TPP) cross‐linking. The influence of fabrication conditions on the physical properties and drug loading and release properties was investigated by transmission electron microscopy (TEM), dynamic light scattering (DLS), and UV–vis spectroscopy. The nanoparticles could be prepared only within a zone of appropriate chitosan and TPP concentrations. The particle size and surface zeta potential can be manipulated by variation of the fabrication conditions such as chitosan/TPP ratio and concentration, solution pH and salt addition. TEM observation revealed a core–shell structure for the as‐prepared nanoparticles, but a filled structure for the ciprofloxacin (CH) loaded particles. Results show that the chitosan nanoparticles were rather stable and no cytotoxicity of the chitosan nanoparticles was found in an in vitro cell culture experiment. Loading and release of CH can be modulated by the environmental factors such as solution pH and medium quality. Copyright © 2008 John Wiley & Sons, Ltd.     

Electrospun poly(ethylene oxide)/chitosan nanofibers with cellulose nanocrystals as support for cell culture of 3T3 fibroblasts

Chitosan/poly(ethylene oxide) (PEO) (5:1) nanofibers with cellulose nanocrystals (CNCs) were produced using an electrospinning technique. The addition of CNCs to the chitosan/PEO solutions allowed the production of uniform fibers (without beads) with a high proportion of chitosan. The fiber diameters were influenced by the concentration of CNCs in the chitosan/PEO solutions. The solutions containing 10% (w/w) of CNCs produced thinner fibers compared to solutions containing 5% (w/w) of CNCs. Thermogravimetric analysis indicated that the nanofibers were thermally stable, despite the CNCs having an effect on the PEO decomposition. Results from the cell assay in cultures of 3T3 fibroblasts indicated that the chitosan/PEO nanofibers (with 10% CNCs) promoted cell attachment with changes in the cytoskeletal organization. The results obtained in this work highlight the favorable effect of CNCs in electrospinning of chitosan/PEO. As expected, the influence of nanofibers on 3T3 fibroblasts F-actin and β-tubulin network revealed alterations in cytoskeleton, leading to changes in cell morphology and spreading.     

Mass preparation of nanofibers by high pressure air‐jet split electrospinning: Effect of electric field

A novel electrospinning method using airflow, namely high pressure air‐jet split electrospinning, was proposed to fabricate polymer nanofibers with ultrahigh production rate. 7 wt % polyacrylonitrile spinning solution with a 0.157 Pa s viscosity was divided into micron size droplets by the filter screen in the front of the nozzle, and then these droplets were divided and split through high pressure airflow, which were drafted into nanofibers directly in the electric field and airflow field. In this study, the electric field distributions with different positive electrodes were simulated and their effect on fiber formation was investigated. The results show that electric field distribution and its intensity depended on electrodes area, a broader electric field distribution with a stronger intensity would bring about a larger cone angle of spraying jet region, at the same time, the contrast in the spray region enhanced. When the whole nozzle was charged, thinner fibers with about 170 nm could be prepared and the fiber production was 75.6 g/h. Compared with the conventional needle electrospinning, the throughput of nanofibers could be improved by thousands of times based on this novel electrospinning method. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 993–1001     

Synthesis of poly(chitosan‐N‐isopropylacrylamide) complex particles with the method of soapless dispersion polymerization

Crosslinked poly(chitosan‐N‐isopropylacrylamide) [poly(NIPAAM‐chitosan)] complex particles were successfully synthesized with the method of soapless dispersion polymerization. The anionic initiator ammonium persulfate (APS) and the cationic initiator 2,2′‐azobis(2‐methylpropionamidine) dihydrochloride (AIBA) were used to initiate the copolymerization. The poly(NIPAAM‐chitosan) copolymer particles synthesized with APS as the initiator had a homogeneous morphology, whereas the copolymer particles synthesized with AIBA as the initiator showed a core–shell morphology. In addition, various variables such as the particle size, reaction rate, and ζ potential were taken into account. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2053–2063, 2003     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006