Side chain engineering and conjugation enhancement of benzodithiophene and phenanthrenequnioxaline based conjugated polymers for photovoltaic devices

A series of donor‐acceptor conjugated polymers incorporating benzodithiophene (BDT) as donor unit and phenanthrenequnioxaline as acceptor unit with different side chains have been designed and synthesized. For polymer P1 featuring the BDT unit and alkoxy chains substituted phenanthrenequnioxaline unit in the backbone, serious steric hindrance resulted in quite low molecular weight. The implementation of thiophene ring spacer in polymer P2 greatly suppressed the interannular twisting to extend the effective conjugation length and consequently gave rise to improved absorption property and device performance. In addition, utilizing the alkylthienyl side chains to replace the alkyl side chains at BDT unit in polymer P3 further enhanced the photovoltaic performance due to the increased conjugation length. For polymer P4, translating the alkoxy side chains at the phenanthrenequnioxaline ring into the alkyl side chains at thiophene linker group enhanced molecular planarity and strengthened π?π stacking. Consequently improved absorption property and increased hole mobility were achieved for polymer P4. Our results indicated that side chain engineering not only can influence the solubility of polymer but also can determine the polymer backbone planarity and hence the photovoltaic properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1915–1926     

On the character of molecular weight distribution of polyethylene produced in the presence of the homogeneous catalytic system (C5H5)2TiCl2Al(C2H5)2Cl

Experimental results obtained when studying the kinetics of ethylene polymerization in toluene, as well as data on fractionating polyethylene, are analysed and compared with the results of theoretical consideration of molecular weight distribution on the basis of the proposed kinetic scheme.The constants of the reactions of propagation, initiation, transfer and termination of polymer chains are evaluated and compared with literature data.     

Synthesis of well‐defined comb‐like graft (co)polymers by nucleophilic substitution reaction between living polymers and polyhalohydrocarbon

A series of graft (co)polymers were synthesized by nucleophilic substitution reaction between iodinated 1,2‐polybutadiene (PB‐I, backbone) and living polymer lithium (side chains). The coupling reaction between PB‐I and living polymers can finish within minutes at room temperature, and high conversion (up to 92%) could be obtained by effectively avoiding side reaction of dimerization when living polymers were capped with 1,1‐diphenylethylene. By virtue of living anionic polymerization, backbone length, side chain length, and side chain composition, as well as graft density, were well controlled. Tunable molecular weight of graft (co)polymers with narrow molecular weight distribution can be obtained by changing either the lengths of side chain and backbone, or the graft density. Graft copolymers could also be synthesized with side chains of multicomponent polymers, such as block polymer (polystyrene‐b‐polybutadiene) and even mixed polymers (polystyrene and polybutadiene) as hetero chains. Thus, based on living anionic polymerization, this work provides a facile way for modular synthesis of graft (co)polymers via nucleophilic substitution reaction between living polymers and polyhalohydrocarbon (PB‐I). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Main kinetic features of ethylene polymerization reactions with heterogeneous Ziegler–Natta catalysts in the light of a multicenter reaction mechanism

A previously developed kinetic scheme for ethylene polymerization reactions with heterogeneous Ziegler–Natta catalysts (see Y. V. Kissin, R. I. Mink, & T. E. Nowlin, J Polym Sci Part A: Polym Chem 1999, 37, 4255 and Y. V. Kissin, R. I. Mink, T. E. Nowlin, & A. J. Brandolini, J Polym Sci Part A: Polym Chem 1999, 37, 4273, 4281) states that the catalysts have several types of active centers that have different activities and different stabilities, produce different types of polymer materials, and respond differently to reaction conditions. Each type of center produces a single polymer component (Flory component), a material with a uniform structure (copolymer composition, isotacticity, etc.) and a narrow molecular weight distribution (weight-average molecular weight/number-average molecular weight = 2.0). This article examines several previously known features of ethylene polymerization and copolymerization reactions on the basis of this mechanism. The discussed subjects include temperature and cocatalyst effects on the polymerization kinetics and molecular weight distribution of polymers and reaction parameter effects (temperature, ethylene and hydrogen partial pressures, and α-olefin and cocatalyst concentrations) on the molecular weights of Flory components. The results show that the formulation of the multicenter kinetic scheme and the development of kinetic tools necessary for the application of this scheme significantly expand our understanding of the working of heterogeneous polymerization catalysts and provide additional means for their control. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1681–1695, 2001     

Modeling molecular weight distribution of comb-branched graft copolymers

Grafting one type polymer onto a different polymer type may yield a comb-branched copolymer. The branching density has a significant effect on its overall molecular weight distribution. A general model is derived to describe the bivariate distribution of molecular weight and branching density for such comb copolymers. The model is applicable for various grafting mechanisms provided the side chains are randomly grafted onto the backbone. The determining parameters are the molecular weight distributions of backbone and side chains, and the branching density. Analytical expressions are obtained for the cases of the side chains having uniform and Schulz–Zimm distributions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 705–714, 1998     

Synthesis and kinetic analysis of DPE controlled radical polymerization of MMA

The 1,1‐diphenylethene (DPE) controlled radical polymerization of methyl methacrylate was performed at 80 °C by using AIBN as an initiator and DPE as a control agent. It was found that the molecular weight of polymer remained constant with monomer conversion throughout the polymerization regardless of the amounts of DPE and initiator in formulation. To understand the result of constant molecular weight of living polymers in DPE controlled radical polymerization, a living kinetic model was established in this research to evaluate all the rate constants involved in the DPE mechanism. The rate constant k₂, corresponding to the reactivation reaction of the DPE capped dormant chains, was found to be very small at 80 °C (1 × 10^?5 s^?1), that accounted for the result of constant molecular weight of polymers throughout the polymerization, analogous to a traditional free radical polymerization system that polymer chains were terminated by chain transfer. The polydispersity index (PDI) of living polymers was well controlled <1.5. The low PDI of obtained living polymers was due to the fact that the rate of growing chains capped by DPE was comparable with the rate of propagation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Modeling of molecular weight development in atom transfer radical polymerization

A kinetic model has been developed for atom transfer radical polymerization processes using the method of moments. This model predicts monomer conversion, number‐average molecular weight and polydispersity of molecular weight distribution. It takes into account the effects of side reactions including bimolecular radical termination and chain transfers. The determining parameters include the ratios of the initiator, catalyst and monomer concentrations, as well as the ratios of the rate constants of propagation, termination, transfer and the equilibrium constant between radicals and their dormant species. The effects of these parameters on polymer chain properties are systematically simulated. The results show that an ideal living radical polymerization exhibiting a linear relationship between number‐average molecular weight versus conversion and polydispersity approaching unity is only achievable under the limiting condition of slow monomer propagation and free of radical termination and transfers. Improving polymerization rate usually accompanies a loss of this linearity and small polydispersity. For polymerization systems having a slow initiation, the dormant species exercise a retention effect on chain growing and tend to narrow the molecular weight distribution. Increasing catalyst concentration accelerates the initiation rate and thus decreases the polydispersities. It is also shown that for a slow initiation system, delaying monomer addition helps to reduce the polydispersities. Radical termination and transfers not only slow down the monomer conversion rates but also broaden polymer molecular weight distributions. Under the limiting conditions of fast propagation and termination and slow initiation, the model predicts the conventional free radical polymerization behaviors.     

Synthesis of PP graft copolymers via anionic living graft-from reactions of polypropylene containing reactive p-methylstyrene units

In this article, we discuss a new chemical route for preparing polypropylene (PP) graft copolymers containing a PP backbone and several (polar and nonpolar) polymer side chains, including polybutadiene, polystyrene, poly(p-methylstyrene), poly(methyl methacrylate), and polyacrylonitrile. The new PP graft copolymers had a controlled molecular structure and a known PP molecular weight, graft density, graft length, and narrow molecular weight distribution of the side chains. The chemistry involves an intermediate poly(propylene-co-p-methylstyrene) copolymer containing few p-methylstyrene (p-MS) units. The methyl group in a p-MS unit could be lithiated selectively by alkylithium to form a stable benzylic anion. Because of the insolubility of the PP copolymer at room temperature, the excess alkylithium could be removed completely from the lithiated polymer. By the addition of the anionically polymerizable monomers, including polar and nonpolar monomers, the stable benzylic anions in PP initiated a living anionic graft-from polymerization at ambient temperature to produce PP graft copolymers without any significant side reactions. The side-chain length was basically proportional to the reaction time and monomer concentration. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4176–4183, 1999     

Facile one‐pot/one‐step technique for preparation of side‐chain functionalized polymers: Combination of SET‐RAFT polymerization of azide vinyl monomer and click chemistry

An azido‐containing functional monomer, 11‐azido‐undecanoyl methacrylate, was successfully polymerized via ambient temperature single electron transfer initiation and propagation through the reversible addition–fragmentation chain transfer (SET‐RAFT) method. The polymerization behavior possessed the characteristics of “living”/controlled radical polymerization. The kinetic plot was first order, and the molecular weight of the polymer increased linearly with the monomer conversion while keeping the relatively narrow molecular weight distribution (M_w/M_n ≤ 1.22). The complete retention of azido group of the resulting polymer was confirmed by ¹H NMR and FTIR analysis. Retention of chain functionality was confirmed by chain extension with methyl methacrylate to yield a diblock copolymer. Furthermore, the side‐chain functionalized polymer could be prepared by one‐pot/one‐step technique, which is combination of SET‐RAFT and “click chemistry” methods. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymeric nanocomposite comprising gold nanoparticles and bilaterally sulfur‐functionalized polystyrene

Anionic polymerization technique has been utilized to synthesize a bilaterally sulfur‐functionalized polystyrene, SCH3‐polystyrene‐SH. The synthesis scheme consists of (1) initiation of 4‐vinylbenzylmethyl sulfide with sec‐butyllithium to form a living sulfur‐containing initiator, (2) polymerization of styrene, and (3) termination of growing polystyrene chain with ethylene sulfide. The resulting bilaterally sulfur‐functionalized polystyrene is used to make polystyrene/gold nanoparticles (AuNPs) nanocomposite with AuNPs formed in situ in polymer solution through reduction of AuClO₄. The effects of the polymer/Au molar ratio as well as the molecular weight of polymer on the size and dispersion of formed AuNPs have been studied, and the superiority of bilaterally functionalized polymer to unilaterally functionalized polymer has been demonstrated. The polystyrene/AuNPs composite has been characterized by GPC, ¹H‐NMR, ¹³C‐NMR, EDS, TEM, UV‐Vis, and DSC. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1268–1277     

The kinetics of enhanced spin capturing polymerization: Influence of the nitrone structure

Several nitrones and one nitroso compound have been evaluated for their ability to control the molecular weight of polystyrene via the recently introduced radical polymerization method of enhanced spin capturing polymerization (ESCP). In this technique, molecular weight control is achieved (at ambient or slightly elevated temperatures) via the reaction of a growing radical chain with a nitrone forming a macronitroxide. These nitroxides subsequently react rapidly and irreversibly with propagating macroradicals forming polymer of a certain chain length, which depends on the nitrone concentration in the system. Via evaluation of the resulting number‐average molecular weight, M_n, at low conversions, the addition rate coefficient of the growing radicals onto the different nitrones is determined and activation energies are obtained. For the nitrones N‐tert‐butyl‐α‐phenylnitrone (PBN), N‐methyl‐α‐phenylnitrone (PMN), and N‐methyl‐α‐(4‐bromo‐phenyl) nitrone (pB‐PMN), addition rate coefficients, k_ad,macro, in a similar magnitude to the styrene propagation rate coefficient, k_p, are found with spin capturing constants C_SC (with C_SC = k_ad,macro/k_p) ranging from 1 to 13 depending on the nitrone and on temperature. Activation energies between 23.6 and 27.7 kJ mol⁻¹ were deduced for k_ad,macro, congruent with a decreasing C_SC with increasing temperature. Almost constant M_n over up to high monomer to polymer conversions is found when C_SC is close to unity, while increasing molecular weights can be observed when the C_SC is large. From temperatures of 100 °C onward, reversible cleavage of the alkoxyamine group can occur, superimposing a reversible activation/deactivation mechanism onto the ESCP system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1098–1107, 2009     

Conformation of ionizable poly Para phenylene ethynylene in dilute solutions

The conformation of dinonyl poly para phenylene ethynylenes (PPEs) with carboxylate side chains, equilibrated in solvents of different quality have been studied using molecular dynamics simulations. PPEs are of interest because of their tunable electro‐optical properties, chemical diversity, and functionality which are essential in wide range of applications. The polymer conformation determines the conjugation length and their assembly mode and affects electro‐optical properties which are critical in current and potential uses. This study investigates the effect of carboxylate fraction on PPEs side chains on the conformation of chains in the dilute limit, in solvents of different quality. The dinonyl PPE chains are modeled atomistically, where the solvents are modeled both implicitly and explicitly. Dinonyl PPEs maintained a stretched out conformation up to a carboxylate fraction f of 0.7 in all solvents studied. The nonyl side chains are extended and oriented away from the PPE backbone in toluene and in implicit good solvent, whereas in water and implicit poor solvent, the nonyl side chains are collapsed toward the PPE backbone. Rotation around the aromatic ring is fast and no long range correlations are seen within the backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 582–588     

Self‐sustained entropy‐driven flow in nano‐confined polymer melts

We present a Monte Carlo simulation study of the Brownian motion of polymer chains in a melt confined in a periodically asymmetric channel of nanometric dimensions. We assume no friction between the chains and the channel. A detailed analysis of the conformations of the chains reveals the presence of a favorable entropy gradient along the easy flow direction. For high molecular weight chains, this gradient is seen to drive a self‐sustained polymer flow with Peclet numbers as high as 0.9, which makes our observation experimentally accessible. Much weaker efficiences are observed at low molecular weights. We show that the unexpected directed Brownian motion of polymers in confined geometries is of significant importance in the design and stabilization of platelet nanocomposites which typically age over time under quiescent conditions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 869–875     

Modeling the reversible addition–fragmentation transfer polymerization process

A kinetic model has been developed for reversible addition–fragmentation transfer (RAFT) polymerization with the method of moments. The model predicts the monomer conversion, number‐average molecular weight, and polydispersity of the molecular weight distribution. It also provides detailed information about the development of various types of chain species during polymerization, including propagating radical chains, adduct radical chains, dormant chains, and three types of dead chains. The effects of the RAFT agent concentration and the rate constants of the initiator decomposition, radical addition, fragmentation, disproportionation, and recombination termination of propagating radicals and cross‐termination between propagating and adduct radicals on the kinetics and polymer chain properties are examined with the model. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1553–1566, 2003     

Living free‐radical polymerization of styrene under a constant source of γ radiation

Living polymerization of styrene was observed using γ radiation as a source of initiation and 1‐phenylethyl phenyldithioacetate as a reversible addition–fragmentation chain transfer (RAFT) agent. The γ radiation had little or no detrimental effect on the RAFT agent, with the molecular weight of the polymer increasing linearly with conversion (up to the maximum measured conversions of 30%). The polymerization had kinetics (polym.) consistent with those of a living polymerization (first order in monomer) and proportional to the square root of the radiation‐dose rate. This initiation technique may facilitate the grafting of narrow polydispersity, well‐defined polymers onto existing polymer surfaces as well as allow a wealth of kinetic experiments using the constant radical flux generated by γ radiation. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 19–25, 2002     

Polymerisation anionique de l'acroleine—I. Polymerisations amorcees par des organo-sodiques dans le tetrahydrofuranne

In tetrahydrofuran, with Na⁺ as counter-ion, the anionic polymerization of acrolein involves numerous transfer reactions to monomer and to polymer; on the other hand, termination of growing chains does not occur. The use of initiators, like carbanions or oxanions, does not affect the polymerization rate. The kinetic order of the reaction is unity for monomer and unity for initiator; these results indicate that the living ends are not associated at the studied concentrations of initiator. Without stating precisely the mechanism of the transfer reactions, we have proposed a kinetic scheme.In tetrahydrofuran, with Na⁺ as counter-ion, the anionic polymerization of acrolein involves numerous transfer reactions to monomer and to polymer; on the other hand, termination of growing chains does not occur. The use of initiators, like carbanions or oxanions, does not affect the polymerization rate. The kinetic order of the reaction is unity for monomer and unity for initiator; these results indicate that the living ends are not associated at the studied concentrations of initiator. Without stating precisely the mechanism of the transfer reactions, we have proposed a kinetic scheme.     

Improving the initiation efficiency in the single electron transfer living radical polymerization of methyl acrylate with electronic chain‐end mimics

Computational studies on the heterolytic bond dissociation energies and electron affinities of methyl 2‐bromopropionate (MBP) and ethyl 2‐bromoisobutyrate (EBiB) in the dissociative electron transfer (DET) step of single electron transfer living radical polymerization (SET‐LRP) of methyl acrylate (MA) combined with kinetic experiments were performed in an effort to design the most efficient initiation system. This study suggests that EBiB is more effective than MBP in the SET‐LRP of acrylates catalyzed by Cu(0) wire, thus being a true electronic mimic of the dormant PMA species. EBiB allows for a more predictable dependence of the molecular weight evolution and distribution. This is exemplified by the absence of a deviation in the PMA molecular weight from theoretical values at low conversions, as a result of a faster SET activation with EBiB than with MBP. The enhanced control over molecular weight evolution was also observed in the SET‐LRP of MA initiated with bifunctional initiators similar in structure to MBP and EBiB, suggesting a higher reactivity than MBP in the SET activation, which matches closely that of the polymer dormant chains. The use of bifunctional initiators in conjunction with activated Cu(0) wire in SET‐LRP allows for dramatically accelerated polymerizations, although still providing for exceptional control of the molecular weight evolution and distribution. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Naphthodithiophene‐Diketopyrrolopyrrole‐Based donor–Acceptor alternating π‐Conjugated polymers for Organic thin‐Film transistors

Novel naphtho[1,2‐b:5,6‐b′]dithiophene (NDT) and diketopyrrolopyrrole (DPP)‐containing donor‐acceptor conjugated polymers (PNDTDPPs) with different branched side chains were synthesized via Pd(0)‐catalyzed Stille coupling reaction. Octyldodecyl (OD) and dodecylhexadecyl (DH) groups were tethered to the DPP units as the side chains. The soluble fraction of PNDTDPP‐OD polymer in chloroform has much lower molecular weight than that of PNDTDPP‐DH polymer. PNDTDPP‐DH polymer bearing relatively longer DH side chains exhibited much better charge‐transport behavior than PNDTDPP‐OD polymer with shorter OD side chains. The thermally annealed PNDTDPP‐DH polymer thin films exhibited an outstanding charge carrier mobility of ～1.32 cm² V^?1 s^?1 (I_on/I_off ～ 10⁸) measured under ambient conditions, which is almost six times higher than that of thermally annealed PNDTDPP‐OD polymer thin films. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5280–5290     

Efficient fabrication of polymer nanoparticles via sonogashira cross‐linking of linear polymers in dilute solution

The synthesis of single‐chain nanoparticles by palladium‐catalyzed Sonogashira coupling between a terminal alkyne and a di‐halo aryl cross‐linker is reported. Statistical copolymers with trimethylsilyl protected alkyne groups pendent to the linear methacrylate back bones were synthesized using reversible addition‐fragmentation chain transfer polymerization post polymerization de‐protection providing terminal alkyne functionalized linear polymer chains. These linear polymer chains were intramolecularly cross‐linked via bifunctional cross‐linkers. The resulting well‐defined covalently bonded nanoparticles were characterized via triple‐detection size exclusion chromatography where MALS detector provided molecular weight information and viscometric detection characterizes particle size and conformations. The particle size could be readily tuned through polymer molecular weight and by degree of cross‐linking. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 209–217