Flow potentiometric and constant-current stripping analysis for mercury(II) with gold,platinum and carbon fibre working electrodes : Application to the Analysis of Tap Water

Gold, platinum and carbon fibres with 10-μm diameter were mounted in PVC tubes and used as flow sensors in computerized potentiometric and constant-current stripping analysis for mercury, after electroplating ofa gold film onto the fibre surfaces. Compared to gold and glassy carbon disc electrodes, the fibre electrodes gare increased sensitivity and stability and were considerably simpler to handle. The gold-coated carbon fibre electrode gave a higher background than the gold fibre electrode, in both the potentiometric and constant-current stripping modes. Mercury(II) could be determined in presence of a 10⁵-fold (molar) amount of copper(II) by constant-current stripping in media with chloride concentrations below 0.05 M. The detection limit for mercury(II) after 10 min of electrolysis was 45 ng l^?1 at the 3 σ level.     

Effect of Various Deposition Techniques,Electrode Materials and Posttreatment with Tetrabutylammonium and Tetrabutylphosphonium Salts on the Electrochemical Behavior and Stability of Various Prussian Blue Modified Electrodes

The effect of various deposition techniques, electrode materials and posttreatment with tetrabutylammonium and tetrabutylphosphonium salts on the electrochemical behavior and stability of various Prussian blue (PB) modified electrodes, namely PB modified glassy carbon electrodes, silicate‐film supported PB modified glassy carbon electrodes, PB‐doped silicate glassy carbon electrodes, PB modified carbon ceramic electrodes using electrochemical deposition and PB modified carbon ceramic electrodes using chemical deposition is reported. Cyclic voltammetry and amperometric measurements of hydrogen peroxide were performed in a flow injection system while the carrier phosphate buffer (pH 7.0) with a flow rate of 0.8 mL min^?1 was propelled into the electrochemical flow through cell housing the PB modified working electrode as well as an Ag|AgCl|0.1 M KCl reference and a Pt auxiliary electrode. The results showed that the deposition procedure, electrode material and posttreatment with additional chemicals can significantly alter the stability and electrochemical behavior of the PB film. Among the studied PB modified electrodes, those based on carbon ceramic electrodes modified with a film of electropolymerized PB showed the best electrochemical stability.     

A sonotrode for electroanalysis: the determination of copper in passivating media

A sonotrode consisting of a disc shaped glassy carbon electrode attached to a quartz rod and inserted into a drilled ultrasonic probe tip has been designed and used as a novel alternative to the traditional 'face on' cell arrangement where an ultrasonic micro-tip probe is placed opposite a glassy carbon working electrode. The 'single probe' arrangement is both convenient and optimised for electroanalysis. We first report how under ultrasonic agitation of the sonotrode the mass transport to the electrode surface is enhanced compared to that observed under silent conditions and also how the sonotrode cell geometry compares with the well-established 'face on' cell geometry for cobalt electrodeposition. Second, we will show that the new sonotrode can be used in the application for the determination of copper in a series of fouling media in which conventional silent electroanalysis fails. The passivation of the electrodes surface by surfactant species can be overcome by cavitationally induced streaming and/or erosion at the sonotrode surface with recoveries of 100% and 93.8% achieved at 42 W cm-2 for Triton X-100 and sodium dodecyl sulfate (SDS), respectively. Other data indicates that the sonotrode can be successfully employed for the detection of copper in beer (Marston's bitter), a system known to be complex and highly electrode fouling and difficult to analyse using standard, silent electroanalytical techniques.     

Low potential detection of nicotine at multiwalled carbon nanotube–alumina-coated silica nanocomposite

Electrocatalytic oxidation of nicotine at multiwalled carbon nanotube (MWCNT)–alumina-coated silica (ACS) nanocomposite modified glassy carbon electrode are described. The sensing performance of the MWCNT–ACS nanocomposite modified glassy carbon electrode for the electrooxidation of nicotine was investigated using cyclic voltammetry and amperometry in 0.1 M phosphate buffer solution (pH 8). The MWCNT–ACS nanocomposite modified glassy carbon electrode exhibited the abilities to decrease the electrooxidation potential, to prevent the electrode surface fouling, and to raise the current responses. The MWCNT–ACS nanocomposite responded rapidly to nicotine with a sensitivity of 1.786 A M^?1 cm^?2 and a detection limit of 1.42 μM (according to 3σ criterion). A signal almost 180 times more sensitive was obtained at MWCNT–ACS nanocomposite modified glassy carbon electrodes as compared to bare glassy carbon electrode. The nicotine oxidation potential obtained in this study is much lower than that at boron-doped diamond electrodes.     

The Suitability of Various Electrode Materials for the Electrogeneration of Halogens in Constant-Current Coulometry

Abstract

During a voltammetric study of the suitability of platinum, gold, glassy carbon, tungsten, and tantalum as electrode materials for generating halogens in constant-current coulometry it was found that glassy carbon, tungsten, and tantalum are not suitable. Both platinum and gold electrodes can be used; with platinum the possibility of interference caused by formation of complexes of the electrode metal with halides is smaller than with gold.     

Integration of microchip electrophoresis with electrochemical detection using an epoxy-based molding method to embed multiple electrode materials

This paper describes the use of epoxy-encapsulated electrodes to integrate microchip-based electrophoresis with electrochemical detection. Devices with various electrode combinations can easily be developed. This includes a palladium decoupler with a downstream working electrode material of either gold, mercury/gold, platinum, glassy carbon, or a carbon fiber bundle. Additional device components such as the platinum wires for the electrophoresis separation and the counter electrode for detection can also be integrated into the epoxy base. The effect of the decoupler configuration was studied in terms of the separation performance, detector noise, and the ability to analyze samples of a high ionic strength. The ability of both glassy carbon and carbon fiber bundle electrodes to analyze a complex mixture was demonstrated. It was also shown that a PDMS-based valving microchip can be used along with the epoxy-embedded electrodes to integrate microdialysis sampling with microchip electrophoresis and electrochemical detection, with the microdialysis tubing also being embedded in the epoxy substrate. This approach enables one to vary the detection electrode material as desired in a manner where the electrodes can be polished and modified as is done with electrochemical flow cells used in liquid chromatography.     

Electrochemical study of boron-mercurated derivatives of 3-cyclopentadienyl-3-cobalta-1,2-dicarba-closo-dodecaborane

The cyclic voltammetry and rotating disc electrode methods were used to study the electrochemical reduction and oxidation of boron-mercurated mono- and dimercury derivatives of 3-cyclopentadienyl-3-cobalta-1,2-dicarba-closo-dodecaborane and boron-mercurated dicobaltacarborane on platinum and glassy carbon electrodes in MeCN and DMF solutions. The first reduction step was the reversible electron transfer to the cobalt atom. This process is complicated by adsorption of the reaction product on the electrode, which is especially pronounced when the electrode is coated by metallic mercury evolved at later steps of reduction. The presumptive mechanisms of electroreduction are discussed in detail.     

The effect of electrocatalytic nanoparticle injection on the electrochemical response at a rotating disc electrode

A new approach to study electrocatalytic oxidation of glucose is proposed. As opposed to numerous studies on electrodes modified with gold nanoparticles this reaction was studied in their suspension of gold nanoparticles under hydrodynamic conditions on a noncatalytic glassy carbon rotating disc electrode. It has been shown that addition of nanogram amount of positively charged Au nanoparticles results in a clear current response, whereas no clear response is seen for negatively charged ones. This effect results from the electrocatalytic oxidation of glucose on Au nanoparticles mainly adsorbed on glassy carbon electrode. The role of electrode preparation method on reproducibility of the results is emphasized.     

Determination of Mercury by Chronopotentiometric Stripping Analysis Using Glassy Carbon Vessel as a Working Electrode

In this work chronopotentiometric stripping analysis of mercury was performed using a process vessel of glassy carbon as a working electrode. Experimental parameters for both steady and rotating vessel were investigated and compared. Relative sensitivity as well as the sharpness of the analytical signal was better when the rotation of the process vessel was performed. The new design provided better sensitivity when compared to both stationary and rotating glassy carbon disk electrodes. Detection limit obtained for the electrolysis time of 600 s was 0.1 ng/L of Hg(II). The accuracy of the technique was confirmed by analyzing the standard reference material – tomato leaves.     

电解液离子与炭电极双电层电容的关系

以酚醛树脂基纳米孔玻态炭(NPGC)为电极, 通过微分电容伏安曲线的测试, 研究了水相体系电解液离子与多孔炭电极双电层电容的关系. 结果表明, 稀溶液中, 多孔炭电极的微分电容曲线在零电荷点(PZC)处呈现凹点, 电容降低, 双电层电容受扩散层的影响显著；若孔径小, 离子内扩散阻力大, 电容下降更为迅速, 扩散层对双电层电容的影响增大. 而增大炭材料的孔径或电解液浓度, 可明显减弱甚至消除扩散层对电容的影响. 炭电极的单位面积微分电容高, 仅表明孔表面利用率高, 如欲获得高的电容量, 还要有大的比表面积. 离子水化对炭电极的电容产生不利影响, 选用大离子和增大炭材料的孔径, 可有效降低离子水化对炭电极电容性能的影响.     

The Direct Electrochemical Oxidation of Ammonia in Propylene Carbonate: A Generic Approach to Amperometric Gas Sensors

The direct electrochemical oxidation of ammonia in propylene carbonate is reported for the first time. The voltammetric responses at glassy carbon, boron‐doped diamond, edge and basal plane pyrolytic graphite electrodes are explored and compared with the outcome indicating that the optimum electrode substrate for analytical purposes in this solvent is glassy carbon. Proof‐of‐concept is shown for the amperometric detection of ammonia using basal plane pyrolytic graphite electrodes abrasively modified with glassy carbon spheres. Given the significantly lower vapor pressure of propylene carbonate in comparison to water the implications for extending the life‐time of practical sensors are evident. Propylene carbonate shows a wide potential window with glassy carbon electrodes permitting this approach to be used for a potential diversity of gaseous analytes.     

Direct electrochemical behavior of cytochrome c on DNA-modified glassy carbon electrode and its application to cytochrome c biosensor.

DNA was immobilized on glassy carbon electrodes to fabricate DNA-modified electrodes. The direct electron transfer of horse heart cytochrome c on DNA-modified glassy carbon electrode was achieved. A pair of well-defined redox peaks of cytochrome c appeared at Epc = -0.017 V and Epa = 0.009 V (vs. Ag/AgCl) in 10 mM phosphate buffer solution (pH 7.0) at a scan rate of 50 mV/s. The electron transfer coefficient (alpha) and the standard rate constant of the surface reaction (Ks) of cytochrome c on DNA-modified electrodes could be estimated to be 0.87 and 34.52 s(-1), respectively. The DNA-modified glassy carbon electrode could be applied to detect cytochrome c by means of differential pulse voltammetry (DPV). The cathodic peak current was proportional to the quantity of cytochrome c in the range of 4.0 x 10(-6) M to 1.2 x 10(-5) M. The correlation coefficient is 0.996, and with the detection limit was 1.0 x 10(-6) M (three times the ratio of signal to noise, S/N = 3).     

Gas sensing using edge-plane pyrolytic-graphite electrodes: electrochemical reduction of chlorine

The voltammetric responses of chlorine in aqueous acid solutions have been explored using different carbon-based electrodes. Edge-plane pyrolytic graphite has more electrochemical reversibility than glassy carbon, basal-plane pyrolytic graphite, or boron-doped diamond electrodes. A significant reduction in the overpotential is observed on the edge-plane pyrolytic-graphite electrode in contrast with the other carbon-based electrode substrates. These results suggest that edge-plane pyrolytic graphite can be optimally used as the working electrodes in Clark-cell devices for low-potential amperometric gas sensing of Cl₂.     

Use of glassy carbon as a working electrode in controlled potential coulometry

Glassy carbon has been used as the working electrode in controlled potential coulometry. The results of coulometric investigations of chromium, copper, iron, uranium and neptunium are compared with results obtained with platinum or mercury working electrodes. The accuracy of results with the glassy carbon electrode compares favourably with the results obtainable with the other electrodes, but the precision is poorer.     

Carbon Composite Electrodes for Liquid Chromatography/Electrochemistry: Optimizing Detector Performance by Tailoring the Electrode Composition

Abstract

Results obtained in this laboratory and elsewhere suggest that carbon composite electrodes may possess a signal-to-noise (S/N) advantage compared to continuous electrodes such as glassy carbon when used for detection of analytes in flowing streams. One succomposite electrode which appears partic- ularly attractive in this regard is the Kel-F-graphite (Kelgraf) electrode, compression molded from Kel-F and powdered graphite and containing 5 to 30% graphite by weight. Studies of the electrode surface by scanning electron microscopy and X-ray photoelectron spectroscopy in conjunction with electrochemical investigations employing chronoamperometry, cyclic voltammetry, and capacitance measurements have led us to view the electrode surface as an ensemble of rnicroelectrodes, the dimensions of which can be varied by changes in particle size and/or ratio of Kel-F to graphite in the composite. The S/N advantage of the composite electrode apparently arises from a signal (current) enhanced by radial diffusion of analyte to the individual microelectrodes, resulting in a response greater than that obtained from a continuous electrode of equal active area. Since detector noise is generally assumed proportional to the active area of the electrode, S/N enhancement results.

For composite electrodes employed in a thin-layer channel design LC detector, the observed variations in the S/N ratio with changes in (1) composite composition (%C), (2) particle size of Kel-F used in fabrication of the composite, and (3) area of composite exposed in the flow channel are discussed within the context of the microelectrode ensemble model. It is further demonstrated that the ability of the electrode to resist fouling can be modified by variation in composite composition.     

Bio-electrocatalysis of NADH and ethanol based on graphene sheets modified electrodes

Characterization and application of graphene sheets modified glassy carbon electrodes (graphene/GC) have been presented for the electrochemical bio-sensing. A probe molecule, potassium ferricyanide is employed to study the electrochemical response at the graphene/GC electrode, which shows better electron transfer than graphite modified (graphite/GC) and bare glassy carbon (GC) electrodes. Based on the highly enhanced electrochemical activity of NADH, alcohol dehydrogenase (ADH) is immobilized on the graphene modified electrode and displays a more desirable analytical performance in the detection of ethanol, compared with graphite/GC or GC based bio-electrodes. It also exhibits good performance of ethanol detection in the real samples. From the results of electrochemical investigation, graphene sheets with a favorable electrochemical activity could be an advanced carbon electrode materials for the design of electrochemical sensors and biosensors.     

Demonstration of the advantages of using bamboo-like nanotubes for electrochemical biosensor applications compared with single walled carbon nanotubes

The modification of glassy carbon electrodes with random dispersions of nanotubes is currently the most popular approach to the preparation of carbon nanotube modified electrodes. The performance of glassy carbon electrodes modified with a random dispersion of bamboo type carbon nanotubes was compared with single walled carbon nanotubes modified glassy carbon electrodes and bare glassy carbon electrodes. The electrochemical performance of all three types for electrode were compared by investigating the electrochemistry with solution species and the oxidation of guanine and adenine bases of surface adsorbed DNA. The presence of edge planes of graphene at regular intervals along the walls of the bamboo nanotubes resulted in superior electrochemical performance relative to SWNT modified electrodes from two aspects. Firstly, with solution species the peak separation of the oxidation and reduction waves were smaller indicating more rapid rates of electron transfer. Secondly, a greater number of electroactive sites along the walls of the bamboo-carbon nanotubes (BCNTs) resulted in larger current signals and a broader dynamic range for the oxidation of DNA bases.     

Direct Electrooxidation of Ascorbic Acid at the Nanocrystaline Graphite‐like Pyrolytic Carbon Film Electrode

Pyrolytic carbon films (PCFs) were prepared by chemical vapor deposition (CVD) at different deposition temperatures. As an example of using PCF electrode in electroanalysis, the direct electrooxidation of ascorbic acid (AA) at the PCF electrode was investigated and compared with common carbon‐based electrodes such as glassy carbon (GC), edge plane pyrolytic graphite (EPPG), and basal plane pyrolytic graphite (BPPG) electrodes. It was found that the PCF electrodes prepared under deposition temperatures higher than 1050 °C showed a higher sensitivity and lower overpotential compared to the other carbon electrodes. The electrode was successfully applied for determination of AA in real samples.     

Electrocatalytic Reduction of Dioxygen on the Surface of Glassy Carbon Electrodes Modified with Cobalt Porphyrin Complexes

The preparation and electrocatalytic behavior of glassy carbon electrodes modified with three different cobalt porphyrin complexes were investigated. The electrocatalytic ability of the modified electrodes for the reduction of dioxygen to hydrogen peroxide and water in air‐saturated aqueous solutions was examined by cyclic voltammetry and chronoamperometry techniques. The porphyrin‐adsorbed glassy carbon electrodes possess excellent electrocatalytic abilities for dioxygen reduction with overpotential about 0.5 V lower than that at a plain glassy carbon electrode. The experimental parameters were optimized and the mechanism of the catalytic process was discussed. The possible effects of the electron‐donating properties of groups in the meso‐position of the porphyrin ring were investigated.     

Surface preparation of glassy carbon electrodes

Recent work on glassy carbon electrodes for various applications is reviewed. Activation of glassy carbon electrodes by different types of polishing, heat treatment, and electrochemical methods yields enhanced rates of electron transfer. Characterization of different glassy carbon surfaces by x-ray photoelectron spectroscopy shows that polished and electrochemically pretreated surfaces contain more oxygen on the surface than do unactivated surfaces; much of this oxygen is associated with phenolic groups. Causes of activation, characterization of glassy carbon by spectroscopic methods, and the role of surface cleanliness are summarized. For simple electron-transfer reactions, removal of contaminants from the electrode surface is important. For proton-coupled electrode reactions, specific interactions of reactants with catalytic groups created on the surface during polishing tend to play an important role in electrode activation