Determination of trace amounts of nickel by differential pulse adsorptive cathodic stripping voltammetry using calconcarboxylic acid as a chelating agent

A method for the determination of nickel(II) by stripping voltammetry is described. The method is based on the adsorptive accumulation of nickel(II) calconcarboxylic acid complex onto a hanging mercury drop electrode (HMDE), followed by the reduction of the adsorbed complex using differential pulse voltammetry. The optimum operating conditions and parameters were found to be 0.05 M NH₃/NH₄Cl buffer (pH = 9.5) as the supporting electrolyte, a ligand concentration of 1 × 10^?6 M, accumulation potential of ?0.5 V (vs. Ag/AgCl) and accumulation time of 60 s. At the optimized conditions, the peak current is proportional to the concentration of nickel in the range of 1.7 × 10^?9 to 4.7 × 10^?7 M (0.1–28 ng ml^?1) with a detection limit of 0.05 ng ml^?1. The relative standard deviation (n = 10) at nickel concentrations of 2, 10 and 15 ng ml^?1 varies in the range 0.76 to 2.1%. Possible interferences by metal ions, which are of great significance in real matrices, have been studied. The method was successfully applied to the determination of nickel content in a chocolate sample.     

Low-Temperature Phosphorescence Analysis of Mebendazole and Related Imidazoles

Abstract

Native low-temperature phosphorescence of mebendazole and flubendazole in ethanol is used for the determination of these imidazoles in anthelmintic preparations with wavelength maxima and detection limits of λ_EXC = 322 nm, λ_EM = 454 nm; 10 ng ml^?1 and λ_EXC = 325 nm, = λ_EM = 455 nm; 5 ng ml^?1, respectively, with linear response up to 8 μg ml^?1 and 9 μg ml^?1, respectively. The structural basis of these phenomena is discussed for both compounds and for related imidazoles and benzimidazoles. Apart from good sensitivity and excellent specificity offered by the technique, the use of cryogenic equipment (liquid nitrogen, special cuvettes, expensive dewar cells) implies some disadvantages for routine analyses.     

Kinetic Spectrophotometric Determination of Vanadium (V) Based on its Inhibitory Effect on the Thionine – Ascorbic Acid Reaction

ABSTRACT

A simple and sensitive kinetic method for the determination of vanadium(V) based on its inhibitory effect on the reduction of thionine by ascorbic acid at pH=5 is described. The reaction rate is monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 598 nm after a fixed time (10 min). The calibration graph is linear in the range of 10 ? 120 ng ml^?1 of vanadium(V) and the detection limit is 6 ng ml^?1. The relative standard deviation (RSD) for 80 ng ml^?1 of V(V) was 0.96% (n=10). The method was successfully applied to the determination of vanadium in a certified reference sample.     

Indirect determination of vanadium by atomic absorption spectrometry

An indirect method for the determination of vanadium as vanadate by atomic absorption spectrometry is described. In neutral medium, vanadate forms a stable ion-association complex with copper (II) and biguanide, which is extractable into butanol with an efficiency higher than 99%. The copper content in the extract (and hence indirectly VO^?₃) is determined by aspirating it directly into an acetylene flame. The calibration graph is linear up to 3.4 μg ml^?1 of VO^?₃. The limit of detection is 16 ng ml^?1. Only chromium interferes.     

Spectrofluorimetric determination of titanium,zirconium and hafnium and their binary mixtures with biacetylmonoxime nicotinylhydrazone

The synthesis, characteristics and analytical applications of biacetylmonoxime nicotinylhydrazone are described. This compound forms fluorescent complexes with titanium(IV) (λ_ex = 430, λ_em = 540 nm), zirconium (λ_ex = 415 nm, λ_em = 505 nm) and hafnium (λ_ex = 400, λ_em = 500 nm) in an acidic medium. Titanium forms a 1:2 metal:ligand complex, whereas zirconium and hafnium form 1:2:1 metal:ligand:sulphate ternary complexes. Highly selective spectrofluorimetric methods for titanium (20–100 ng ml^?1), zirconium and hafnium (5–100 ng ml^?1) are proposed, and procedures for the analysis of binary mixtures of these ions are described.     

Direct determination of biacetyl in fats by sensitized room temperature phosphorescence

A direct method for the determination of biacetyl in butter and margarine by sensitized room temperature phosphorescence (SRTP) is described. After dissolution of the sample in hexane, biacetyl is isolated by distillation, and its native phosphorescence is sensitized by a non-polar linear furocoumarin, 4′5′-dihydro-3-carbethoxypsoralen. The limit of detection is 0.05 ng ml^?1 biacetyl, with a linear response from 1 × 10^?4 to 1 μg ml^?1 (r = 0.999). The RSD is 3.5% at 100 ng ml^?1.     

Cloud point extraction and spectrophotometric determination of amaranth in food samples using nonionic surfactant Triton X-100 and tetrabutylammonium hydrogen sulfate

Cloud point extraction methodology was successfully employed for preconcentration of trace amounts of amaranth prior to its determination by spectrophotometry. The method was based on the extraction of amaranth as an ion pair with tetrabutylammonium ion from aqueous solution using Triton X-100 as non-ionic surfactant. The extracted surfactant rich phase was diluted with ethanol and its absorbance was measured at 518 nm by a spectophotometer. An optimum set of surfactant concentration, pH, equilibration temperature and time, tetrabutylammonium hydrogen sulfate and salt concentration were obtained. The calibration graph was linear in the range of 20–1600 ng ml^?1 of amaranth in the initial solution with r = 0.9993 (n = 12). Detection limit based on three times the standard deviation of the blank (3S_b) was 13.0 ng ml^?1 (n = 10), and the relative standard deviation (R.S.D) for 100 and 1000 ng ml^?1 of amaranth was 4.2 and 1.4% (n = 10), respectively. The proposed procedure was applied to the determination of amaranth in different food samples.     

Determination of total rare earth elements,thorium and chromium with 2-(2-arsenophenylazo)-1,8-dihydroxy-7-(2,6-dibromo-4-fluorophenylazo) naphthalene-3,6-disulphonic acid by reversed-phase ion-pair liquid chromatography

The retention behaviour of the complexes of rare earth elements, thorium and chromium with 2-(2- arsenophenylazo)-1,8-dihydroxy-7-(2,6-dibromo-4-fluorophenylazo)naphthalene-3,6-disulphonic acid was studied. Precolumn derivatization was used. The stationary phase was ODS-bonded silica and the mobile phase was methanol-water-tetrabutylammonium bromide. The detection limits are 2 ng ml^?1 for total rare earths, 2.5 ng ml^?1 for thorium and 10 ng ml^?1 for chromium. The tolerance of foreign ions is very high. The method can be applied satisfactorily to ore samples and rocks.     

Simultaneous determination of copper and lead by graphite-furnace atomic absorption spectrometry after liquid-liquid extraction of the ion pair with zephiramine

A procedure for the simultaneous determination of copper and lead by graphite-furnace atomic absorption spectrometry was investigated by means of a two-channel atomic absorption spectrometer. Both copper(II) and lead(II) are converted into their iodo complex anions and extracted quantitatively into diisobutyl ketone as their ion pairs with tetradecyldimethylbenzylammonium (zephiramine) in a 10-ml centrifuge tube. An aliquot of the organic extract is directly pipetted from the upper layer in the centrifuge tube and injected into the graphite furnace. The detection limits (S/N = 3) are 2.6 ng ml^?1 of copper and 1.0 ng ml^?1 of lead. The relative standard deviations for 10 replicate determinations are 2.9% for 20 ng ml^?1 of copper and 2.7% for 10 ng ml^?1 of lead. Results of analyses of some practical samples are given.     

Spectrophotometric determination of iron(III) with EDTA tetrahydrazide

The tetrahydrazide of ethylenediamine tetraacetic acid (NH₂NH)₄-EDTA was synthesized from the EDTA ester and hydrazine hydrate in ethanolic solution, the resulting (NH₂NH)₄-EDTA being recrystallized in 60% ethanol. When the spectrophotometric study of the iron(III) (NH₂NH)₄-EDTA complex in aqueous solution was made two absorption maxima at 530 and 450 nm at pH 4.5 and 11.0, respectively, were found. Beer's law is obeyed in the range 1.0–20.0 μg Fe(III) ml^?1 at 530 nm and pH 4.5 and 0.5–12.0 μg Fe(III) ml^?1 at 450 nm and pH 11.0, the molar absorptivities being 1.95 × 10³ 1 mol^?1 cm^?1 at 530 nm and 3.35 × 10³ 1 mol^?1 cm^?1 at 450 nm, respectively. The Ringbom optimal interval falls between about 3 and 18 μg Fe(III) ml^?1 at 530 nm and about 2–14 μg Fe(III) ml^?1 at 450 nm. The reaction between the metal and the ligand was also investigated. The method has been successfully applied to the determination of iron in talcs.     

Rapid spectrophotometric determination of ruthenium(III) with prochlorperazine maleate

A rapid, simple spectrophotometric method for the determination of μg amounts of ruthenium, based on the formation of a pink complex between the metal and prochlorperazine maleate (PCPM) in sulphuric or hydrochloric acid solution, is described. The complex has an absorption maximum at 530 nm and its molar absorptivity is 6.733·10³ l mol^?1 cm^?1. The sensitivity is 0.0151 μg Ru cm^?2 for log I_o/I = 0.001. Beer's law is valid over the range 0.2–10 μg Ru ml^?1 ; the optimal range for spectrophotometric determination is 0.8–8.0 μg Ru ml^?1. Job's method of continuous variation, the mole ratio method and the slope ratio method indicate a 1:1 composition for the complex. The effects of acidity, time, temperature, order of addition of reagents, reagent concentration, and the interferences from various ions are reported.     

Polarography of disodium pentacyanonitrosylferrate(II): Part 2. Determination at Therapeutic Levels in Serum,Plasma, and Whole Blood

Disodium pentacyanonitrosylferrat(II) (sodium nitroprusside) is determined at therapeutic (ng ml^?1) levels in plasma, serum and blood with conventional and high-performance differential pulse polarography (d.p.p. and h.p.d.p.p.) at a dropping mercury electrode or a static mercury drop electrode. Serum or plasma (3 ml) is treated with perchloric acid containing 1 mg ml^?1 potassium hexacyanoferrate(II), centrifuged for 10 min and subjected to polarography. For spiked serum, calibration graphs are linear over the range 30–1000 ng ml^?1 sodium nitroprusside, regardless of the polarographic technique; the estimated detection limit is 15 ng ml^?1 (5 × 10^?8 M). Calculated therapeutic levels range from 100 to 1000 ng ml^?1. Similar results were obtained for spiked plasma. A similar procedure is suitable for whole blood and was used to study the in-vitro degradation of sodium nitroprusside (200 ng ml^?1) on incubation at 37°C. The in-vitro loss is rapid (t_{$\text{1}\text{2}$} ≈ 6 min) but meaningful in-vivo levels can be obtained when the blood is collected in a 0.9% sodium chloride solution at 0°C. Thiocyanate, the main metabolite of nitroprusside, and thiosulphate, which is a potential antidote for cyanide, do not interfere.     

Spectrophotometric study of the reaction of titanium with bromopyrogallol red in the presence of cetylpyridinium bromide

Optimal conditions were found for the reaction of Ti(IV) with bromopyrogallol red (λ = 625 nm, pH = 2.5, c_DG = 4 × 10^?5M, c_CPB = 5 × 10^?4M) and a new method was developed for the spectrophotometric determination of titanium in the concentration range 0.05–0.5 μg ml^?1. A mechanism was proposed for the studied reaction on the basis of a kinetic study.     

Extraction and spectrophotometric determination of niobium by tetraphenylarsonium and phosphonium chloride from a hydrochloric acid solution

The extraction of niobium(V) in the form of a chloro complex has been studied. Radiometrical and spectrophotometrical studies show that niobium(V) is extracted practically completely from a solution containing more than 9 mol dm^?3 chloride in the range of 2–5 M hydrogen ion concentration by chloroform solutions of tetraphenylarsonium (TPA) and tetraphenylphosphonium (TPP) chloride and that niobium is not extracted at chloride concentrations less than 6 mol dm^?3. The mechanism of extraction is based on the formation of the ion-associated compounds that form between the onium cation and the oxotetra-chloroniobate(V) anion. The extracted complexes in chloroform have a maximum absorbance at 282 nm (TPA) and 285 nm (TPP); they obey Beer's law in the range of 1–10 μg Nb ml^?1, and are stable for at least 24 hr. The molar absorptivity of the method is 1.33 × 10⁴ dm³ mol^?1cm^?1. The composition of the extracted species [(C₆H₅)₄X] [NbOCl₄] where X = As or P was determined spectrophotometrically, radiometrically, and by characterization of the crystalline compounds isolated.     

Cloud point extraction and spectrophotometric determination of codeine in pharmaceutical and biological samples

Cloud point extraction process using non-ionic surfactant, Triton X-114, to extract codeine from aqueous solution was investigated. The method was based on the extraction of codeine and bromothymol blue from acetate buffer media to surfactantrich phase and formed a charge transfer-ion pair complex. The extracted surfactant-rich phase was diluted with ethanol and its absorbance was measured at 430 nm. The effect of different variables such as pH, Triton X-114 concentration, cloud point temperature and time was established. The calibration graph was linear in a wide range of 100–700 ng ml^?1 of codeine with r = 0.998 (n = 7). The detection limit based on three times standard deviation of the blank (3s) was 4.6 ng ml^?1 and relative standard deviation (R.S.D) is 2.15% for 500 ng ml^?1 codeine (n = 5). The proposed method was applied to the determination of codeine in acetaminophen codeine tablets and blood samples.     

Determination of mixtures of ampicillin and cloxacillin in pharmaceuticals by second-derivative spectrophotometry

Mixtures of ampicillin-Na and cloxacillin-Na are assayed by peak-to-baseline and zero-crossing second-derivative spectrophotometry. The procedure does not require any separation step. Calibration plots are linear (r = 0.9999) up to 30 μg ml^?1 of ampicillin-Na at 216 nm and up to 40 μg ml^?1 ampicillin-Na or cloxacillin-Na at 228 nm or 248.8 nm, respectively, in the presence of one another. Detection limits at the p = 0.05 level of significance, range from 0.15 pg ml^?1 to 0.33 μg ml^?1. The method was successfully applied to commercial injections and capsules containing these penicillins.     

Fluorimetric determination of mebendazole and flubendazole in pharmaceutical dosage forms after alkaline hydrolysis

The selective and very sensitive fluorimetric determination of mebendazole and flubendazole is based on alkaline hydrolysis and adsorption on Whatman 42 filter paper. Limits of detection are 0.1 μg ml^?1 and 0.5 μg ml^?1, respectively, with linear response sponse up to 10 μg ml^?1 and 50 μg ml^t?1. The fluorescence produced is very stable (λ_em = 460 nm) and the method is applicable to anthelmintic pharmaceutical preparations.     

Pyrocatechol-1-Aldehyde 2-Benzothiazolylhydrazone As Reagent for the Spectrofluorimetric Determination of Nanogram Amounts of Gallium in Urine and Blood Serum

Abstract

A method is developed for the spectrofluorimetric determination of 1–80 ng.ml^?1 of gallium with pyrocatechol-1-aldehyde 2-benzothiazolylhydrazone, in a 50% (v/v) DMSO-Water medium at apparent pH 4.0 (monochloracetic/monochloracetate buffer). Λ_ex = 400nm, Λ_em = 504 nm (corrected). Interferences have been evaluated and the method applied to the determination of gallium in human urine and blood serum samples.     

Stopped-flow injection determination of copper(II) at the ng ml−1 level

A stopped-flow injection method for the determination of copper(II) in the range 0.2–300 ng ml^?1 is proposed, based on the catalytic effect of this ion on the 2,2'-dipyridylketone hydrazone/hydrogen peroxide reaction. The oxidation product shows an intense blue fluorescence that is monitored at λ_ex = 350 nm, λ_em = 427 nm. The sampling rate (72 h^?1), r.s.d. (1.4%) and the lack of interference from most foreign ions, allowed application of the method to the determination of copper in foods and blood serum.     

Voltammetric behaviour of ascorbic acid at a graphite—epoxy composite electrode chemically modified with cobalt phthalocyanine and its amperometric determination in multivitamin preparations

Cyclic voltammetry was used to investigate the electrochemical behaviour of ascorbic acid at a carbon—epoxy composite electrode modified with the electron mediator cobalt phthalocyanine. The modified electrode reduced the overpotential necessary for the oxidation of the vitamin by approximately 150 mV to 0.21 V vs. The saturated calomel electrode; the process was dependent on the pH of the supporting electrolyte, but independent of ionic strength over the range studied. The relative standard deviation (r.s.d.) of the peak heights of the cyclic voltammograms was 0.81% for a 1 × 10^?4 M ascorbic acid solution (n = 7). The optimum supporting electrolyte was found to be 0.05 M phosphate buffer (pH 5).Amperometry in stirred solutions was then done at an applied potential of +0.25 V. The limit of detection was 0.65 ng ml^?1 and the calibration graph was linear in the range 175 ng ml^?1?50 μg ml^?1. The method was used to determine ascorbic acid concentrations in single- and multivitamin preparations; the recovery was 97.86% for the vitamin added to one preparation. The r.s.d. for the analyses in these samples was about 5%. For comparison, the vitamin was also determined in these tablets using LC with UV detection at 254 nm; the correlation coefficient for the levels determined was 0.9989 (p = 0.0007).