13C and (2)H kinetic isotope effects and the mechanism of Lewis acid-catalyzed ene reactions of formaldehyde

13C and (2)H kinetic isotope effects were determined for the ene reaction of formaldehyde with 2-methyl-2-butene at natural abundance catalyzed by diethylaluminum chloride. The reactive methyl group exhibits a k(12)(C)/k(13)(C) of 1.006-1.009 and a k(H)/k(D) of approximately 1.22-1.23. The latter represents a combination of primary and secondary effects and is consistent with a significant primary deuterium isotope effect. A very close correspondence of the other isotope effects with the equilibrium isotope effects predicted for formation of a model intermediate cation is observed. An intermolecular deuterium isotope effect of 2.0-2.5 was observed under several reaction conditions in the Lewis acid-catalyzed reaction of formaldehyde with d(0)/d(12)-tetramethylethylene. The results are interpreted as supporting the reversible formation of an essentially classical open cation followed by rate-limiting proton transfer.     

Ruthenium dihydride complexes: NMR studies of intramolecular isomerization and fluxionality including the detection of minor isomers by parahydrogen-induced polarization

NMR studies reveal that complexes Ru(CO)(2)(H)(2)L(2) (L = PMe(3), PMe(2)Ph, and AsMe(2)Ph) can have three geometries, ccc, cct-L, and cct-CO, with equilibrium ratios that are highly dependent on the electronic properties of L; the cct-L form is favored, because the sigma-only hydride donor is located trans to CO rather than L. When L = PMe(3), the ccc form is only visible when p-H(2) is used to amplify its spectral features. In contrast, when L = AsMe(2)Ph, the ccc and cct-L forms are present in similar quantities and, hence, must have similar free energies; for this complex, however, the cct-CO isomer is also detectable. These complexes undergo a number of dynamic processes. For L(2) = dppe, an interchange of the hydride positions within the ccc form is shown to be accompanied by synchronized CO exchange and interchange of the two phosphorus atoms. This process is believed to involve the formation of a trigonal bipyramidal transition state containing an eta(2)-H(2) ligand; in view of the fact that k(HH)/k(DD) is 1.04 and the synchronized rotation when L(2) = dppe, this transition state must contain little H-H bonding character. Pathways leading to isomer interconversion are suggested to involve related structures containing eta(2)-H(2) ligands. The inverse kinetic isotope effect, k(HH)/k(DD) = 0.5, observed for the reductive elimination of dihydrogen from Ru(CO)(2)(H)(2)dppe suggests that substantial H-H bond formation occurs before the H(2) is actually released from the complex. Evidence for a substantial steric influence on the entropy of activation explains why Ru(CO)(2)(H)(2)dppe undergoes the most rapid hydride exchange. Our studies also indicate that the species [Ru(CO)(2)L(2)], involved in the addition of H(2) to form Ru(CO)(2)(H)(2)L(2), must have singlet electron configurations.     

Kinetics and mechanism of hydrogen-atom abstraction from rhodium hydrides by alkyl radicals in aqueous solutions

The kinetics of the reaction of benzyl radicals with [L(1)(H(2)O)RhH{D}](2+) (L(1)=1,4,8,11-tetraazacyclotetradecane) were studied directly by laser-flash photolysis. The rate constants for the two isotopologues, k=(9.3±0.6) × 10(7) M(-1) s(-1) (H) and (6.2±0.3) × 10(7) M(-1) s(-1) (D), lead to a kinetic isotope effect k(H)/k(D)=1.5±0.1. The same value was obtained from the relative yields of PhCH(3) and PhCH(2)D in a reaction of benzyl radicals with a mixture of rhodium hydride and deuteride. Similarly, the reaction of methyl radicals with {[L(1)(H(2)O)RhH](2+) + [L(1)(H(2)O)RhD](2+)} produced a mixture of CH(4) and CH(3)D that yielded k(H)/k(D)=1.42±0.07. The observed small normal isotope effects in both reactions are consistent with reduced sensitivity to isotopic substitution in very fast hydrogen-atom abstraction reactions. These data disprove a literature report claiming much slower kinetics and an inverse kinetic isotope effect for the reaction of methyl radicals with hydrides of L(1)Rh.     

BF3-activated oxidation of alkanes by MnO4 -

The oxidation of alkanes and arylalkanes by KMnO(4) in CH(3)CN is greatly accelerated by the presence of just a few equivalents of BF(3), the reaction occurring readily at room temperature. Carbonyl compounds are the predominant products in the oxidation of secondary C-H bonds. Spectrophotometric and kinetics studies show that BF(3) forms an adduct with KMnO(4) in CH(3)CN, [BF(3).MnO(4)](-), which is the active species responsible for the oxidation of C-H bonds. The rate constant for the oxidation of toluene by [BF(3).MnO(4)](-) is over 7 orders of magnitude faster than by MnO(4)(-) alone. The kinetic isotope effects for the oxidation of cyclohexane, toluene, and ethylbenzene at 25.0 degrees C are as follows: k(C6H12)/k(C6D12) = 5.3 +/- 0.6, k(C7H8)/k(C7D8) = 6.8 +/- 0.5, k(C8H10)/k(C8D10) = 7.1 +/- 0.5. The rate-limiting step for all of these reactions is most likely hydrogen-atom transfer from the substrate to an oxo group of the adduct. A good linear correlation between log(rate constant) and C-H bond energies of the hydrocarbons is found. The accelerating effect of BF(3) on the oxidation of methane by MnO(4)(-) has been studied computationally by the Density Functional Theory (DFT) method. A significant decrease in the reaction barrier results from BF(3) coordination to MnO(4)(-). The BF(3) coordination increases the ability of the Mn metal center to achieve a d(1) Mn(VI) electron configuration in the transition state. Calculations also indicate that the species [2BF(3).MnO(4)](-) is more reactive than [BF(3).MnO(4)](-).     

Hydrogen transfer to carbonyls and imines from a hydroxycyclopentadienyl ruthenium hydride: evidence for concerted hydride and proton transfer.

Reaction of ([2,5-Ph(2)-3,4-Tol(2)(eta(5)-C(4)CO)](2)H)Ru(2)(CO)(4)(mu-H) (6) with H(2) formed [2,5-Ph(2)-3,4-Tol(2)(eta(5)-C(4)COH)Ru(CO)(2)H] (8), the active species in catalytic carbonyl reductions developed by Shvo. Kinetic studies of the reduction of PhCHO by 8 in THF at -10 degrees C showed second-order kinetics with Delta H(double dagger) = 12.0 kcal mol(-1) and Delta S(double dagger) = -28 eu. The rate of reduction was not accelerated by CF(3)CO(2)H, and was not inhibited by CO. Selective deuteration of the RuH and OH positions in 8 gave individual kinetic isotope effects k(RuH)/k(RuD) = 1.5 +/- 0.2 and k(OH)/k(OD) = 2.2 +/- 0.1 for PhCHO reduction at 0 degrees C. Simultaneous deuteration of both positions in 8 gave a combined kinetic isotope effect of k(OHRuH)/k(ODRuD) = 3.6 +/- 0.3. [2,5-Ph(2)-3,4-Tol(2)(eta(5)-C(4)COSiEt(3))Ru(CO)(2)H] (12) and NEt(4)(+)[2,5-Ph(2)-3,4-Tol(2)(eta(4)-C(4)CO)Ru(CO)(2)H](-) (13) were unreactive toward PhCHO under conditions where facile PhCHO reduction by 8 occurred. PhCOMe was reduced by 8 30 times slower than PhCHO; MeN=CHPh was reduced by 8 26 times faster than PhCHO. Cyclohexene was reduced to cyclohexane by 8 at 80 degrees C only in the presence of H(2.) Concerted transfer of a proton from OH and hydride from Ru of 8 to carbonyls and imines is proposed.     

Scope and mechanistic study of the ruthenium-catalyzed ortho-C-H bond activation and cyclization reactions of arylamines with terminal alkynes

The cationic ruthenium hydride complex [(PCy(3))(2)(CO)(CH(3)CN)(2)RuH](+)BF(4)(-) was found to be a highly effective catalyst for the C-H bond activation reaction of arylamines and terminal alkynes. The regioselective catalytic synthesis of substituted quinoline and quinoxaline derivatives was achieved from the ortho-C-H bond activation reaction of arylamines and terminal alkynes by using the catalyst Ru(3)(CO)(12)/HBF(4).OEt(2). The normal isotope effect (k(CH)/k(CD) = 2.5) was observed for the reaction of C(6)H(5)NH(2) and C(6)D(5)NH(2) with propyne. A highly negative Hammett value (rho = -4.4) was obtained from the correlation of the relative rates from a series of meta-substituted anilines, m-XC(6)H(4)NH(2), with sigma(p) in the presence of Ru(3)(CO)(12)/HBF(4).OEt(2) (3 mol % Ru, 1:3 molar ratio). The deuterium labeling studies from the reactions of both indoline and acyclic arylamines with DCCPh showed that the alkyne C-H bond activation step is reversible. The crossover experiment from the reaction of 1-(2-amino-1-phenyl)pyrrole with DCCPh and HCCC(6)H(4)-p-OMe led to preferential deuterium incorporation to the phenyl-substituted quinoline product. A mechanism involving rate-determining ortho-C-H bond activation and intramolecular C-N bond formation steps via an unsaturated cationic ruthenium acetylide complex has been proposed.     

Mechanism of hydrogen transfer to imines from a hydroxycyclopentadienyl ruthenium hydride. Support for a stepwise mechanism

The negligible double kinetic deuterium isotope effect (k(HH)/k(DD)= 1.05) in the reaction where [2,3,4,5-Ph4(eta5-C4COH)Ru(CO)2H (2) transfers a hydride and a proton to N-phenyl-[1-(4-methoxyphenyl)ethylidene]amine (4) indicates that no bond to hydrogen is broken or formed in the rate-determining step.     

Mechanistic study of hydrogen transfer to imines from a hydroxycyclopentadienyl ruthenium hydride. Experimental support for a mechanism involving coordination of imine to ruthenium prior to hydrogen transfer

Reaction of [2,3,4,5-Ph(4)(eta(5)-C(4)COH)Ru(CO)(2)H] (2) with different imines afforded ruthenium amine complexes at low temperatures. At higher temperatures in the presence of 2, the complexes decomposed to give [Ru(2)(CO)(4)(mu-H)(C(4)Ph(4)COHOCC(4)Ph(4))] (1) and free amine. Electron-rich imines gave ruthenium amine complexes with 2 at a lower temperature than did electron-deficient imines. The negligible deuterium isotope effect (k(RuHOH)/k(RuDOD) = 1.05) observed in the reaction of 2 with N-phenyl[1-(4-methoxyphenyl)ethylidene]amine (12) shows that neither hydride (RuH) nor proton (OH) is transferred to the imine in the rate-determining step. In the dehydrogenation of N-phenyl-1-phenylethylamine (4) to the corresponding imine 8 by [2,3,4,5-Ph(4)(eta(4)-C(4)CO)Ru(CO)(2)] (A), the kinetic isotope effects observed support a stepwise hydrogen transfer where the isotope effect for C-H cleavage (k(CHNH)/k(CDNH) = 3.24) is equal to the combined (C-H, N-H) isotope effect (k(CHNH)/k(CDND) = 3.26). Hydrogenation of N-methyl(1-phenylethylidene)amine (14) by 2 in the presence of the external amine trap N-methyl-1-(4-methoxyphenyl)ethylamine (16) afforded 90-100% of complex [2,3,4,5-Ph(4)(eta(4)-C(4)CO)]Ru(CO)(2)NH(CH(3))(CHPhCH(3)) (15), which is the complex between ruthenium and the amine newly generated from the imine. At -80 degrees C the reaction of hydride 2 with 4-BnNH-C(6)H(9)=NPh (18), with an internal amine trap, only afforded [2,3,4,5-Ph(4)(eta(4)-C(4)CO)](CO)(2)RuNH(Ph)(C(6)H(10)-4-NHBn) (19), where the ruthenium binds to the amine originating from the imine, showing that neither complex A nor the diamine is formed. Above -8 degrees C complex 19 rearranged to the thermodynamically more stable [Ph(4)(eta(4)-C(4)CO)](CO)(2)RuNH(Bn)(C(6)H(10)-4-NHPh) (20). These results are consistent with an inner sphere mechanism in which the substrate coordinates to ruthenium prior to hydrogen transfer and are difficult to explain with the outer sphere pathway previously proposed.     

Mechanism of the

Stereochemical studies on [2 + 2] photoaddition of cis-/trans-4-propenylanisole (cis-1 and trans-1) and cis-1-(p-methoxyphenyl)ethylene-2-d(1) (cis-3-d(1)) to C(60) exhibit stereospecificity in favor of the trans-2 cycloadduct in the former case and nonstereoselectivity in the latter. The observed stereoselectivity in favor of the cis-6-d(3) [2 + 2] diastereomer by 12% in the case of the photochemical addition of (E)-1-(p-methoxyphenyl)-2-methyl-prop-1-ene-3,3,3-d(3) (trans-5-d(3)) to C(60) is attributed to a steric kinetic isotope effect (k(H)/k(D) = 0.78). The loss of stereochemistry in the cyclobutane ring excludes a concerted addition and is consistent with a stepwise mechanism. Intermolecular secondary kinetic isotope effects of the [2 + 2] photocycloaddition of 3-d(0) vs 3-d(1), and 3-d(6) as well as 5-d(0) vs 5-d(1), and 5-d(6) to C(60) were also measured. The intermolecular competition due to deuterium substitution of both vinylic hydrogens at the beta-carbon of 3 exhibits a substantial inverse alpha-secondary isotope effect k(H)/k(D) = 0.83 (per deuterium). Substitution with deuterium at both vinylic methyl groups of 5 yields a small inverse k(H)/k(D) = 0. 94. These results are consistent with the formation of an open intermediate in the rate-determining step.     

Dynamics of a cis-dihydrogen/hydride complex of iridium

Insertion of CS2 into one of the Ir-H bonds of [Ir(H)5(PCy3)2] takes place to afford the dihydrido dithioformate complex cis-[Ir(H)2(eta2-S2CH)(PCy3)2] accompanied by the elimination of H2. Protonation of the dithioformate complex using HBF4.Et2O gives cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] wherein the H atom undergoes site exchange between the dihydrogen and the hydride ligands. The dynamics was found to be so extremely rapid with respect to the NMR time scale that the barrier to exchange could not be measured. Partial deuteration of the hydride ligands resulted in a J(H,D) of 6.5 and 7.7 Hz for the H2D and the HD2 isotopomers of cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4], respectively. The H-H distance (d(HH)) for this complex has been calculated to be 1.05 A, which can be categorized under the class of elongated dihydrogen complexes. The cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] complex undergoes substitution of the bound H2 moiety with CH(3)CN and CO resulting in new hydride derivatives, cis-[Ir(H)(L)(eta2-S2CH)(PCy3)2][BF4] (L = CH3CN, CO). Reaction of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] with electrophilic reagents such as MeOTf and Me3SiOTf afforded a new hydride aquo complex cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] via the elimination of CH4 and Me3SiH, respectively, followed by the binding of a water molecule (present in trace quantities in the solvent) to the iridium center. The X-ray crystal structures of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] and cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] have been determined.     

Mechanistic study of an improbable reaction: alkene dehydrogenation by the delta12 acetylenase of Crepis alpina

The mechanism by which the fatty acid acetylenase of Crepis alpina catalyzes crepenynic acid ((9Z)-octadeca-9-en-12-ynoic acid) production from linoleic acid has been probed through the use of kinetic isotope effect (KIE) measurements. This was accomplished by incubating appropriate mixtures of regiospecifically deuterated isotopomers with a strain of Saccharomyces cerevisiae expressing a functional acetylenase. LC/MS analysis of crepenynic acid obtained in these experiments showed that the oxidation of linoleate occurs in two discrete steps, since the cleavage of the C12-H bond is very sensitive to isotopic substitution (k(H)/k(D) = 14.6 +/- 3.0) while a minimal isotope effect (k(H)/k(D) = 1.25 +/- 0.08) was observed for the C13-H bond breaking step. These data suggest that crepenynic acid is produced via initial H-atom abstraction at C12 of a linoleoyl substrate. The relationship between the mechanism of enzymatic acetylenation and epoxidation is discussed.     

Accumulation of tetrahedral intermediates in cholinesterase catalysis: a secondary isotope effect study

In a previous communication, kinetic β-deuterium secondary isotope effects were reported that support a mechanism for substrate-activated turnover of acetylthiocholine by human butyrylcholinesterase (BuChE) wherein the accumulating reactant state is a tetrahedral intermediate ( Tormos , J. R. ; et al. J. Am. Chem. Soc. 2005 , 127 , 14538 - 14539 ). In this contribution additional isotope effect experiments are described with acetyl-labeled acetylthiocholines (CL(3)COSCH(2)CH(2)N(+)Me(3); L = H or D) that also support accumulation of the tetrahedral intermediate in Drosophila melanogaster acetylcholinesterase (DmAChE) catalysis. In contrast to the aforementioned BuChE-catalyzed reaction, for this reaction the dependence of initial rates on substrate concentration is marked by pronounced substrate inhibition at high substrate concentrations. Moreover, kinetic β-deuterium secondary isotope effects for turnover of acetylthiocholine depended on substrate concentration, and gave the following: (D3)k(cat)/K(m) = 0.95 ± 0.03, (D3)k(cat) = 1.12 ± 0.02 and (D3)βk(cat) = 0.97 ± 0.04. The inverse isotope effect on k(cat)/K(m) is consistent with conversion of the sp(2)-hybridized substrate carbonyl in the E + A reactant state into a quasi-tetrahedral transition state in the acylation stage of catalysis, whereas the markedly normal isotope effect on k(cat) is consistent with hybridization change from sp(3) toward sp(2) as the reactant state for deacylation is converted into the subsequent transition state. Transition states for Drosophila melanogaster AChE-catalyzed hydrolysis of acetylthiocholine were further characterized by measuring solvent isotope effects and determining proton inventories. These experiments indicated that the transition state for rate-determining decomposition of the tetrahedral intermediate is stabilized by multiple protonic interactions. Finally, a simple model is proposed for the contribution that tetrahedral intermediate stabilization provides to the catalytic power of acetylcholinesterase.     

Hydrogen atom transfer reactions of a ruthenium imidazole complex: hydrogen tunneling and the applicability of the Marcus cross relation

The reaction of Ru(II)(acac)2(py-imH) (Ru(II)imH) with TEMPO(*) (2,2,6,6-tetramethylpiperidine-1-oxyl radical) in MeCN quantitatively gives Ru(III)(acac)2(py-im) (Ru(III)im) and the hydroxylamine TEMPO-H by transfer of H(*) (H(+) + e(-)) (acac = 2,4-pentanedionato, py-imH = 2-(2'-pyridyl)imidazole). Kinetic measurements of this reaction by UV-vis stopped-flow techniques indicate a bimolecular rate constant k(3H) = 1400 +/- 100 M(-1) s(-1) at 298 K. The reaction proceeds via a concerted hydrogen atom transfer (HAT) mechanism, as shown by ruling out the stepwise pathways of initial proton or electron transfer due to their very unfavorable thermochemistry (Delta G(o)). Deuterium transfer from Ru(II)(acac)2(py-imD) (Ru(II)imD) to TEMPO(*) is surprisingly much slower at k(3D) = 60 +/- 7 M(-1) s(-1), with k(3H)/k(3D) = 23 +/- 3 at 298 K. Temperature-dependent measurements of this deuterium kinetic isotope effect (KIE) show a large difference between the apparent activation energies, E(a3D) - E(a3H) = 1.9 +/- 0.8 kcal mol(-1). The large k(3H)/k(3D) and DeltaE(a) values appear to be greater than the semiclassical limits and thus suggest a tunneling mechanism. The self-exchange HAT reaction between Ru(II)imH and Ru(III)im, measured by (1)H NMR line broadening, occurs with k(4H) = (3.2 +/- 0.3) x 10(5) M(-1) s(-1) at 298 K and k(4H)/k(4D) = 1.5 +/- 0.2. Despite the small KIE, tunneling is suggested by the ratio of Arrhenius pre-exponential factors, log(A(4H)/A(4D)) = -0.5 +/- 0.3. These data provide a test of the applicability of the Marcus cross relation for H and D transfers, over a range of temperatures, for a reaction that involves substantial tunneling. The cross relation calculates rate constants for Ru(II)imH(D) + TEMPO(*) that are greater than those observed: k(3H,calc)/k(3H) = 31 +/- 4 and k(3D,calc)/k(3D) = 140 +/- 20 at 298 K. In these rate constants and in the activation parameters, there is a better agreement with the Marcus cross relation for H than for D transfer, despite the greater prevalence of tunneling for H. The cross relation does not explicitly include tunneling, so close agreement should not be expected. In light of these results, the strengths and weaknesses of applying the cross relation to HAT reactions are discussed.     

Hydride reduction of NAD+ analogues by isopropyl alcohol: kinetics, deuterium isotope effects and mechanism

Observed pseudo-first-order rate constants (k(obs)) of the hydride-transfer reactions from isopropyl alcohol (i-PrOH) to two NAD(+) analogues, 9-phenylxanthylium ion (PhXn(+)) and 10-methylacridinium ion (MA(+)), were determined at temperatures ranging from 49 to 82 degrees C in i-PrOH containing various amounts of AN or water. Formations of the alcohol-cation ether adducts (ROPr-i) were observed as side equilibria. The equilibrium constants for the conversion of PhXn(+) to PhXnOPr-i in i-PrOH/AN (v/v = 1) were determined, and the equilibrium isotope effect (EIE = K(i-PrOH)/K(i-PrOD)) at 62 degrees C was calculated to be 2.67. The k(H) of the hydride-transfer step for both reactions were calculated on the basis of the k(obs) and K. The corresponding deuterium kinetic isotope effects (e.g., KIE(OD)(H) = k(H)(i-PrOH)/k(H)(i-PrOD) and KIE(beta-D6)(H) = k(obs)(i-PrOH)/k(obs)((CD3)2CHOH)), as well as the activation parameters, were derived. For the reaction of PhXn(+) (62 degrees C) and MA(+) (67 degrees C), primary KIE(alpha-D)(H) (4.4 and 2.1, respectively) as well as secondary KIE(OD)(H) (1.07 and 1.18) and KIE(beta-D6)(H) (1.1 and 1.5) were observed. The observed EIE and KIE(OD)(H) were explained in terms of the fractionation factors for deuterium between OH and OH(+)(OH(delta+)) sites. The observed inverse kinetic solvent isotope effect for the reaction of PhXn(+) (k(obs)(i-PrOH)/k(obs)(i-PrOD) = 0.39) is consistent with the intermolecular hydride-transfer mechanism. The dramatic reduction of the reaction rate for MA(+), when the water or i-PrOH cosolvent was replaced by AN, suggests that the hydride-transfer T.S. is stabilized by H-bonding between O of the solvent OH and the substrate alcohol OH(delta+). This result suggests an H-bonding stabilization effect on the T.S. of the alcohol dehydrogenase reactions.     

Scandium ion-promoted reduction of heterocyclic N=N double bond. Hydride transfer vs electron transfer

Hydride transfer from 10-methyl-9,10-dihydroacridine (AcrH(2)) to 3,6-diphenyl-1,2,4,5-tetrazine (Ph(2)Tz), which contains a N=N double bond, occurs efficiently in the presence of Sc(OTf)(3) (OTf = OSO(2)CF(3)) in deaerated acetonitrile (MeCN) at 298 K, whereas no reaction occurs in the absence of Sc(3+). The observed second-order rate constant (k(obs)) increases with increasing Sc(3+) concentration to approach a limited value. When AcrH(2) is replaced by the dideuterated compound (AcrD(2)), the rate of Sc(3+)-promoted hydride transfer exhibits the same primary kinetic isotope effect (k(H)/k(D) = 5.2+/-0.2), irrespective of Sc(3+) concentration. Scandium ion also promotes an electron transfer from CoTPP (TPP(2)(-) = tetraphenylporphyrin dianion) and 10,10'-dimethyl-9,9'-biacridine [(AcrH)(2)] to Ph(2)Tz, whereas no electron transfer from CoTPP or (AcrH)(2) to Ph(2)Tz occurs in the absence of Sc(3+). In each case, the observed second-order rate constant of electron transfer (k(et)) shows a first-order dependence on [Sc(3+)] at low concentrations and a second-order dependence at higher concentrations. Such dependence of k(et) on [Sc(3+)] is ascribed to formation of 1:1 and 1:2 complexes between Ph(2)Tz(*)(-) and Sc(3+) at the low and high concentrations of Sc(3+), respectively, which results in acceleration of the rate of electron transfer. The formation of 1:2 complex has been confirmed by the ESR spectrum in which the hyperfine structure is different from that of free Ph(2)Tz(*)(-). The 1:2 complex formation results in the saturated kinetic dependence of k(obs) on [Sc(3+)] for the Sc(3+)-promoted hydride transfer, which proceeds via Sc(3+)-promoted electron transfer from AcrH(2) to Ph(2)Tz, followed by proton transfer from AcrH(2)(*)(+) to the 1:1 Ph(2)Tz(*)(-)-Sc(3+) complex and the subsequent facile electron transfer from AcrH(*) to Ph(2)TzH(*). The effects of counteranions on the Sc(3+)-promoted electron transfer and hydride transfer reactions are also reported.     

Investigation of the mechanism of alkane reductive elimination and skeletal isomerization in Tp'Rh(CNneopentyl)(R)H complexes: the role of alkane complexes

Experiments are described that provide indirect evidence for the involvement of alkane sigma-complexes in oxidative addition/reductive elimination reactions of Tp'Rh(L)(R)H complexes (Tp' = tris-3,5-dimethylpyrazolylborate, L = CNCH(2)CMe(3)). Reductive elimination rates in benzene-d(6) were determined for loss of alkane from Tp'Rh(L)(R)H, where R = methyl, ethyl, propyl, butyl, pentyl, and hexyl, to generate RH and Tp'Rh(L)(C(6)D(5))D. The isopropyl hydride complex Tp'Rh(L)(CHMe(2))H was found to rearrange to the n-propyl hydride complex Tp'Rh(L)(CH(2)CH(2)CH(3))H in an intramolecular reaction. The sec-butyl complex behaves similarly. These same reactions were studied by preparing the corresponding metal deuteride complexes, Tp'Rh(L)(R)D, and the scrambling of the deuterium label into the alpha- and omega-positions of the alkyl group monitored by (2)H NMR spectroscopy. Inverse isotope effects observed in reductive elimination are shown to be the result of an inverse equilibrium isotope effect between the alkyl hydride(deuteride) complex and the sigma-alkane complex. A kinetic model has been proposed using alkane complexes as intermediates and the selectivities available to these alkane complexes have been determined by kinetic modeling of the deuterium scrambling reactions.     

Intramolecular and intermolecular kinetic isotope effects (KIE) in the nitrosoarene ene reaction: experimental evidence for reversible intermediate formation

The intramolecular and intermolecular kinetic isotope effects (KIE) have been determined for the nitrosoarene ene reaction with deuterium-stereolabeled 2,3-dimethyl-2-butenes (TME). trans-TME-d(6) (k(H)/k(D) = 3.0) and gem-TME-d(6) (k(H)/k(D) = 4.0) show large intramolecular primary isotope effects. In contrast, the intramolecular competition in cis-TME-d(6) (k(H)/k(D) = 1.5) and the intermolecular competition for the TME-d(0)/TME-d(12) pair (k(H)/k(D) = 1.98) show considerably smaller, but mechanistically significant kinetic isotope effects. The latter fact is rationalized in terms of reversible formation of a three-membered-ring intermediate, namely the aziridine N-oxide, or a similar unsymmetrical, polarized diradical in the first step of the reaction. Such reversibility has also been implied earlier for triazolinedione (TAD) and singlet oxygen ((1)O(2)) with deuterium-stereolabeled 2-butenes, but of the three enophiles, ArNO is the most sensitive toward reversibility, which is due to its moderate reactivity and its high steric demand.     

Effect of pressure on a heavy-atom isotope effect of yeast alcohol dehydrogenase

Hydrostatic pressure causes a monophasic decrease in the (13)C primary isotope effect expressed on the oxidation of benzyl alcohol by yeast alcohol dehydrogenase. The primary isotope effect was measured by the competitive method, using whole-molecule mass spectrometry. The effect is, therefore, an expression of isotopic discrimination on the kinetic parameter V/K, which measures substrate capture. Moderate pressure increases capture by activating hydride transfer, the transition state of which must therefore have a smaller volume than the free alcohol plus the capturing form of enzyme [Cho, Y.-K.; Northrop, D. B. Biochemistry 1999, 38, 7470-7475]. The decrease in the (13)C isotope effect with increasing pressure means that the transition state for hydride transfer from the heavy atom must have an even smaller volume, measured here to be 13 mL.mol(-1). The pressure data factor the kinetic isotope effect into a semiclassical reactant-state component, with a null value of k(12)/k(13) = 1, and a transition-state component of Q(12)/Q(13) = 1.028 (borrowing Bell's nomenclature for hydrogen tunneling corrections). A similar experiment involving a deuterium isotope effect previously returned the same volume and null value, plus a pressure-sensitive isotope effect [Northrop, D. B.; Cho, Y.-K. Biochemistry 2000, 39, 2406-2412]. Consistent with precedence in the chemical literature, the latter suggested a possibility of hydrogen tunneling; however, it is unlikely that carbon can engage in significant tunneling at ambient temperature. The fact that the decrease in activation volumes for hydride transfer is equivalent when one mass unit is added to the carbon end of a scissile C-H bond and when one mass unit is added to the hydrogen end is significant and suggests a common origin.     

Electrochemical and Theoretical Investigations of the Role of the Appended Base on the Reduction of Protons by [Fe(2) (CO)(4) (κ(2) -PNP(R) )(μ-S(CH(2) )(3) S] (PNP(R) ={Ph(2) PCH(2) }(2) NR, R=Me, Ph)

The behavior of [Fe(2) (CO)(4) (κ(2) -PNP(R) )(μ-pdt)] (PNP(R) =(Ph(2) PCH(2) )(2) NR, R=Me (1), Ph (2); pdt=S(CH(2) )(3) S) in the presence of acids is investigated experimentally and theoretically (using density functional theory) in order to determine the mechanisms of the proton reduction steps supported by these complexes, and to assess the role of the PNP(R) appended base in these processes for different redox states of the metal centers. The nature of the R substituent of the nitrogen base does not substantially affect the course of the protonation of the neutral complex by CF(3) SO(3) H or CH(3) SO(3) H; the cation with a bridging hydride ligand, 1?μH(+) (R=Me) or 2?μH(+) (R=Ph) is obtained rapidly. Only 1?μH(+) can be protonated at the nitrogen atom of the PNP chelate by HBF(4) ?Et(2) O or CF(3) SO(3) H, which results in a positive shift of the proton reduction by approximately 0.15?V. The theoretical study demonstrates that in this process, dihydrogen can be released from a η(2) -H(2) species in the Fe(I) Fe(II) state. When R=Ph, the bridging hydride cation 2?μH(+) cannot be protonated at the amine function by HBF(4) ?Et(2) O or CF(3) SO(3) H, and protonation at the N atom of the one-electron reduced analogue is also less favored than that of a S atom of the partially de-coordinated dithiolate bridge. In this situation, proton reduction occurs at the potential of the bridging hydride cation, 2?μH(+) . The rate constants of the overall proton reduction processes are small for both complexes 1 and 2 (k(obs) ≈4-7?s(-1) ) because of the slow intramolecular proton migration and H(2) release steps identified by the theoretical study.     

Kinetics of the thiazolium ion-catalyzed benzoin condensation.

The formation of benzoin (Ph-CHOH-CO-Ph) from two molecules of benzaldehyde, catalyzed by 3-benzyl-5-(2-hydroxyethyl)-4-methylthiazolium bromide in methanol buffered with Et(3)N/Et(3)NH(+)Cl(-) has been studied. Initial-rate studies at various concentrations of PhCHO (0.1-1.7 M) showed that the reaction is close to being first order in PhCHO. Following the reaction in deuteriomethanol, (1)H NMR spectroscopy allowed rate constants for all three kinetically significant steps to be determined. These show that all three steps are partially rate-determining. A normal deuterium kinetic isotope effect for the overall reaction (k(H)/k(D) approximately 3.4) is observed using PhCDO, and a large inverse solvent isotope effect (k(D)/k(H) approximately 5.9) is observed using deuteriomethanol, consistent with the kinetic scheme presented here.