Chiral syntheses of 6′-β-fluoroaristeromycin, 6′-β-fluoro-5′-noraristeromycin and aristeromycin

Carbocyclic nucleosides substituted at the C-6′ position are receiving increasing attention. Chiral synthetic accessibility to the biologically promising 6′-β-fluoroaristeromycin is lacking. Its preparation and that of the 5′-nor analogue are described. Along the way, a new method to aristeromycin arose as an outgrowth of a requisite structure proof.     

An efficient route to 5,5″-diaryl-2,2′:6′,2″-terpyridines through 2,6-bis(1,2,4-triazin-3-yl)pyridines

A new route to substituted 2,2′:6′,2″-terpyridines based on a new method for the synthesis of substituted 2,6-bis(1,2,4-triazin-3-yl)pyridines and their inverse electron demand Diels-Alder reaction is shown to be an efficient strategy for the synthesis of structurally diverse terpyridine ligands.     

Chemoenzymatic synthesis of novel adenosine carbanucleoside analogues containing a locked 3′-methyl-2′,3′-β-oxirane-fused system

Starting from a readily available enantiopure building block, a straightforward enantioselective approach to 3′-methyl-2′,3′-β-oxirane-fused carbanucleosides bearing adenosine analogues is detailed. The key steps in the syntheses involved a lipase-catalyzed regioselective monoacylation of a diol to obtain the key intermediate and direct coupling of this key intermediate with diversely substituted purine nucleobases under Mitsunobu reaction conditions providing only the N⁹ target molecules.     

Synthesis of new 6-substituted purinyl-5′-nor-1′-homocarbanucleosides based on indanol

A series of new 6-substituted purinyl-5′-nor-1′-homocarbanucleosides based on indanol were synthesized from (±)-cis-3-hydroxymethyl-1-indanol, an appropriately functionalized derivative of which was reacted with 6-chloropurine in the presence of NaH and 18-crown-6 ether to prepare a key intermediate that gave access to the target molecules, purinylcarbanucleosides in which position 6 is occupied by a chloro, hydroxy, methoxy, amino or substituted phenyl group.     

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy- carbocyclic thymidine: a difluoromethylidene analogue of promising anti-HIV agent Ed4T

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy-carbocyclic-thymidine (8) was carried out. The difluoromethylylidene group of 8 was constructed by the electrophilic fluorination to the cyclopentenone 11 by using Selectfluor^®. Introduction of thymine base was investigated based on the Mitsunobu reaction by employing cyclopentenyl allyl alcohols variously substituted at the 4-position. It was found the 4-methoxycarbonyl derivative 14 gave the highest selectivity both in terms of regio- and stereochemistry.     

New bichromophoric-2,2′-bipyridines: synthesis and optical properties

The synthesis and characterization of new unsymmetrically substituted bipyridyl-based chromophores featuring π-conjugated donor, acceptor or photoisomerizable backbones are reported. Their absorption and emission properties are discussed in comparison to those of the parent ligands.     

A novel synthesis of spiro[(2,2-dimethyl-[1,3]-dioxane)-5,2′-(2′,3′-dihydroindole)] using SRN1 reaction conditions

A concise synthesis of the spiro[(2,2-dimethyl-[1,3]-dioxane)-5,2′-(2′,3′-dihydroindole)] nucleus from substituted benzyl chlorides and 5-(hydroxymethyl)-2,2-dimethyl-5-nitro-1,3-dioxane 5 as starting materials is reported. The nitro intermediates 6 and 7 were prepared under S_RN1 reaction conditions.     

An efficient synthesis of fluorine-containing substituted spiro[piperidine-4,4′-pyrano[3,2-c]quinoline]-3′-carbonitrile by nonconventional methods

A series of fluorine-containing substituted spiro[piperidine-4,4′-pyrano[3,2-c]quinolines] were synthesized through a rapid one-pot multi-component reaction under microwave irradiation and sonication. The method has the advantages of excellent yields (80-96%) and short reaction time (3-10 min). We provide a series of fluorinated quinoline derivatives interesting for biological screening tests.     

Facile acid-catalyzed condensation of 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone with phenols, methoxyaromatic systems and enols

Various phenols, methoxy aromatic compounds, 3- and 4-hydroxycoumarins and enols smoothly condense with 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone 1 in an acid medium producing 2-aryl/alkyl-2,2′-biindan-1,1′,3,3′-tetrones in high yields. The adducts of resorcinol, 1,3,5-trihydroxybenzene and α- and β-naphthols of 1 preferably remain in the intramolecular hemi-ketal form, confirmed by X-ray diffraction studies. On the other hand para and meta substituted phenols condense with 1 in an acid medium to produce 6 or 7 substituted 2′,4-spiro(1′,3′-indanedion)-indeno[3,2-b]chromenes in good yields.     

(R)-6,6′-Bis(trifluoromethanesulfonyl)-2,2′-dihydroxy-1,1′-binaphthyl: a new ligand for asymmetric synthesis

The new (R)-6,6′-bis(trifluoromethanesulfonyl)-2,2′-dihydroxy-1,1′-binaphthyl (1) has been synthesized and proved to generate highly active zirconium-based catalysts for asymmetric Mannich-type reactions.     

A new chemical access for 3′-acetyl-4′-hydroxychalcones using borontrifluoride-etherate via a regioselective Claisen-Schmidt condensation and its application in the synthesis of chalcone hybrids

A new chemical access has been developed for the synthesis of 3′-acetyl-4′-hydroxychalcones from 1-(5-acetyl-2-hydroxy-phenyl)-ethanone and various substituted benzaldehydes via a regioselective Claisen-Schmidt condensation using borontrifluoride-etherate (BF₃·OEt₂) at room temperature, in good to excellent yields within 12-24 h. Application of this methodology has also been demonstrated in the synthesis of chalcone hybrids.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

Improved synthesis of N-alkyl substituted dithieno[3,2-b:2′,3′-d]pyrroles

A new, convergent and improved synthetic method to prepare N-alkyl substituted dithienopyrroles is described. The procedure consists of a Pd-catalyzed amination of 3,3′-dibromo-2,2′-bithiophene. The reaction conditions were optimized, which makes this method applicable to prepare these molecules easily in high yields and on a large scale.     

Syntheses and properties of complexes with bis(2,2′-bipyridyl)ruthenium(II) moieties coordinated to 4,4′:2′,2′′:4′′,4′′′-quaterpyridinium ligands

Eleven new complexes of the form cis-[Ru^II(bpy)₂(L^A)]⁴⁺ (bpy = 2,2′-bipyridyl; L^A = a pyridinium-substituted bpy derivative) have been prepared and isolated as their PF₆⁻ salts. Characterisation involved various techniques including ¹H NMR spectroscopy and MALDI mass spectrometry. The UV-Vis spectra show intense intraligand π → π^∗ absorptions and metal-to-ligand charge-transfer (MLCT) bands with two distinct maxima in the visible region. Small shifts in the MLCT bands correlate with the electron-withdrawing strength of the ligand L^A. Cyclic voltammograms show quasi-reversible or reversible Ru^III/II oxidation waves, and two or more ligand-based reductions with varying degrees of reversibility. The variations in the redox potentials correlate with changes in the structure of L^A, and also with the MLCT energies. Differential pulse voltammetry allows the first reduction process for two of the complex salts to be resolved into two peaks. Single-crystal X-ray structures have been solved for three of the new complex salts and also for a pro-ligand salt. Two carboxylate-functionalised compounds have been tested as photosensitizers on TiO₂-coated electrodes, but show only negligible efficiencies, in accord with expectations.     

Axial [6,6′-(2,4-pentadioxy)]-1,1′-biphenyl-2,2′-diamine (PD-BIPHAM): practical synthesis and applications in asymmetric hydrogenation

A rapid, reliable, and atom-economical procedure for the novel axially biphenyl diamine, (R,R,S_ax)-PD-BIPHAM 1, has been developed successfully by using highly efficient central-to-axial transformation strategy. The attractive feature of this methodology is that no tedious resolution was needed. The effectiveness of this new chiral skeleton was initially demonstrated by highly enantioselective hydrogenation of α-dehydroamino acid esters.     

Synthesis of C2-symmetric and unsymmetrically substituted 2,2′-dipyridylamines and crystal structure of a chiral 2,2′-dipyridylamine copper(II) complex

C₂-symmetric and unsymmetrically substituted 2,2′-dipyridylamines have been synthesized by sequential Buchwald-Hartwig aminations of halo-pyridines. The X-ray crystal structure of a copper dichloride complex bearing a C₂-symmetric 2,2′-dipyridylamine reveals details of the binding properties of the ligand and the coordination geometry at the metal center. In preliminary experiments the use of the new nitrogen chelates in asymmetric catalysis has been demonstrated.     

Planar 2,2′-bithiophenes with 3,3′- and 3,3′,4,4′-substituents. A computational study

Ab initio calculations have shown that when carbonyl groups are incorporated into the 3- and 3′-positions of bithiophenes, as part of five-membered rings, the bithiophene system is planar. This is due to electrostatic attraction between the carbonyl oxygen and the sulfur atom in the adjacent ring. In the analogous systems containing a CH₂ group in place of the carbonyl, or containing six-membered rather than five-membered rings, the bithiophenes are twisted. This has implications for preparing planar polythiophenes.     

Novel and efficient regioselective enzymatic approach to 3′-, 5′- and 3′,5′-di-O-crotonyl 2′-deoxynucleoside derivatives

Regioselective syntheses of several O-crotonyl 2′-deoxynucleoside derivatives have been efficiently achieved using a biocatalytic methodology. While Candida antarctica lipase B (CAL-B) afforded the 5′-O-acylated compounds, immobilized lipase from Pseudomonas cepacia (PSL-C) provided the 3′-O-crotonylated analogs. Since classical chemical approaches did not work appropriately due to side isomerization reactions, a mixture of both lipases was used to achieve a useful synthetic route toward diacylated nucleosides.     

Complexation of 4,4′-di(tert-butyl)-5-ethynyl-2,2′-bithiazole with mercury(II) ion: Synthesis, structures and analytical applications

Two new mononuclear mercury(II) alkynyl complexes containing substituted bithiazole unit [R-CC-HgMe] (2) and [R-CC-Hg-CC-R] (3) (R = 4,4′-di(tert-butyl)-2,2′-bithiazol-5-yl) were prepared in good yields by mercuration of 4,4′-di(tert-butyl)-5-ethynyl-2,2′-bithiazole (1) at room temperature via the dehydrohalogenation reaction of MeHgCl and HgCl₂ with terminal acetylene R-CCH. The structures of the title compounds were characterized by NMR and IR spectroscopy, FAB mass spectrometry, X-ray crystallography and luminescence spectra. A new protocol for derivatization of inorganic and organic mercury(II) ions to mono- and dialkynyl mercury(II) compounds followed by extraction into dichloromethane is suggested, which can be effectively analyzed by HPLC technique using UV detection. The proposed procedure can offer a new opportunity for the simultaneous determination of inorganic Hg(II) and MeHg(II) in aqueous solutions.     

A concise synthesis of 3′-α-fluoro-2′,3′-dideoxyguanosine (FddG) via 3′-α-selective fluorination of 8,2′-thioanhydronucleoside

The antiviral nucleoside 3′-α-fluoro-2′,3′-dideoxyguanosine (FddG) was synthesized via 3′-α-selective fluorination of 8,2′-thioanhydronucleoside as the key step. Desulfurization of 3′-α-fluoro-3′-deoxy-8,2′-thioanhydronucleoside could be achieved by the treatment with Raney Ni in toluene. This method provides a concise route to 3′-α-fluoro-2′,3′-dideoxynucleosides that avoids the use of explosive and expensive SF₄-related fluorinating reagents.