1,3:4,6-Di-O-benzylidene-d-mannitol as a source for novel chiral intermediates through regioselective reductive cleavage

Synthetically useful chiral intermediates have been synthesized starting from 1,3:4,6-di-O-benzylidene-d-mannitol by regioselective reductive cleavage using BF₃·Et₂O and Et₃SiH in high yields.     

A novel and efficient synthesis of chiral C2-symmetric 1,4-diamines

A novel and efficient method for synthesis of (R,R)- and (S,S)-C₂-symmetric 1,4-diamines was established. The key steps are a combination of Pinacol Coupling and Corey-Winter olefination.     

Facile and new convenient route for synthesis of some C2-symmetric bidentate phosphine ligands derived from d-mannitol

The preparation of two novel C₂ symmetric bidentate phosphine ligands derived from cheap and available D-mannitol has been reported. These new ligands accompanied by unprecedented one-pot reaction for the regioselective reductive opening of 1,3:4,6-di-O-benzylidene-D-mannitol have been achieved. All reported compounds are fully characterized by standard analytical methods including the measurement of optical activities.     

Synthesis and structure of C2-symmetric N-heterocyclic carbene complexes of palladium

The first 9- and 11-membered cis and trans C₂-symmetric benzimidazol-2-ylidene palladium(II) complexes based on a trans-2,2-dimethyl-1,3-dioxalane backbone were synthesised and the configuration of the complexes was elucidated via NMR and X-ray crystallography.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by C2-symmetric chiral diols

Optically pure C₂-symmetric diols have been synthesized with moderate yields in a straightforward manner, and are used as catalysts in the enantioselective alkylation of aromatic aldehydes with diethylzinc. The addition of diethylzinc to benzaldehyde and sterically hindered 1-naphthaldehyde was achieved with excellent enantioselectivities (97–99% ee) under catalysis with (1R,2R)-1,2-bis(3,5-dibromophenyl)-ethane-1,2-diol and (1R,2R)-1,2-bis(3,5-diphenylphenyl)-ethane-1,2-diol.     

Cyanosilylation of aldehydes catalyzed by N-heterocyclic carbenes

N-Heterocyclic carbenes produced in situ from salts of imidazolium, benzimidazolium, pyrido[1,2-c]imidazolium, imidazolinium, thiazolium, and triazolium catalyze the addition of trimethylsilylcyanide to aldehydes to yield cyanohydrin trimethylsilyl ethers. The use of C₂-symmetric imidazolidenyl carbene derived from (R,R)-1,3-bis[(1-naphthyl)ethyl]imidazolium chloride led to enantioselective cyanosilylation.     

Bi(III) halides as efficient catalysts for the O-acylative cleavage of tetrahydrofurans: an expeditious entry to tetralins

The mild (DCM/20 °C), quantitative, regioselective, O-acylative cleavage of tetrahydrofurans using organic acid halides with catalytic Bi(III) halides is reported. X-ray crystallography is used to rationalise the failure of the reaction in the case of certain crowded acid chlorides, and a useful aspect of chemoselectivity is revealed. The synthetic potential of this reaction is illustrated with a highly efficient O-acylative cleavage/intramolecular alkylation approach to tetralins.     

Synthesis of a C3-symmetric macrocycle with alternating sugar amino acid and tyrosine residues

A C₃-symmetric macrocycle with alternating sugar amino acid and tyrosine residues was synthesized in seven steps from tyrosine tert-butyl ester and a sugar amino acid precursor derived from D-glucosamine. An Fmoc-protected D-glucosamine derivative was oxidized at C-6 to give the sugar amino acid, which was immediately coupled to tyrosine tert-butyl ester to produce an orthogonally protected building block. This building block was subsequently elongated to the trimer via the dimer, and finally cyclized to give the C₃-symmetric macrocycle.     

Interaction of 3,5-di-tert-butyl-o-benzoquinone with secondary amines—a pathway to new sterically hindered N,N-disubstituted o-aminophenols

The interaction of 3,5-di-tert-butyl-o-benzoquinone with secondary amines has been studied. The synthetic procedure was developed in order to synthesize a series of new N,N-disubstituted o-aminophenols. The interaction of 3,5-di-tert-butyl-o-benzoquinone with dimethylamine leads to 2-(N,N-dimethylamino)-4,6-di-tert-butyl-phenol, which is oxidized in the reaction medium by the parent 3,5-di-tert-butyl-o-benzoquinone forming spirocompound 4,5′,6,7′-tetra-tert-butyl-3′-methyl-3′H-spiro[1,3-benzodioxol-2,2′-[1,3]benzoxazole].     

Determination of the configurations of tertiary alcoholic centers in branched-chain carbohydrate derivatives : PMR spectroscopy with a lanthanide shift-reagent

Examination of the PMR spectral changes (expressed as shift gradients of individual protons) wrought by graduated addition of the paramagnetic lanthanide complex tris [1,1,1,2,2,3,3-heptafluoro- 7,7-dimethyloctane-4,6-dionato]europium(III) [Eu(fod)₃] permitted assignment of the configuration at tertiary alcoholic centers of certain sugar derivatives. The configurations of the tertiary position of 3- C-(1,3-dithian-2-yl)-1,2:5,6-di-O-isopropylidene-α-d-allofuranose (1), lethyl of 4,6-O-benzylidene-2- deoxy-3-C-(dithian-2-yl)-α-d-ribo-hexopyranoside (2) and the corresponding 3-C-butyl compound (2a), and methyl 2-C-(1,3-dithian-2-yl)-3,4-O-isopropylidene-δ-d-ribopyranoside (3) were assigned by comparison with reference spectra. The proton shift-gradients for 5-C-benzoyloxymethyl-2,3-O- cyclohexylidene-1-O-p-tolylsulfonyl-1(R),2(S),3(S),5(R)-cyclohexanetetrol (4), taken in conjunction with the spin-spin coupling values, permit direct assignment of relative stereochemistry in the latter compound.     

Olefin insertion in Pd-acyl complexes modified with 1,4-Cs-symmetrical diphosphine ligands

The insertion of ethene and propene was investigated in palladium(II) acyl complexes of the type [PdC(O)CH₃(P^∧P′)(CH₃CN)](OTf) modified with the C_s-symmetric diphosphines 2-4 and the parent ligand 1, described by C_2v-symmetry and taken as a reference.Ethene insertion was investigated for acyl complexes containing the ligands 2 and 3. Two insertion products formed in a ratio of approximately 1:1 for both systems, irrespective of the electronic properties of the ligands.Propene as an α-olefin can insert according to a 1,2- or 2,1-insertion mode into a palladium acyl bond, arising regioselectivity issues. Moreover, due to the C_s-symmetry of the ligands, two stereoisomers can result upon insertion, as the alkyl group of the formed five-membered metallacycle can be cis or trans to each non-equivalent moiety. Propene insertion was indeed neither stereo- nor regioselective in the cases of 3 and 4, in which the products arising from both 1,2- and 2,1-insertion were observed. 2 displayed total control of stereo- and regioselectivity, with the formation of one primary insertion product. Similar regioselectivity was observed for the reference ligand 1. The regioisomeric distribution was different from equimolar for propene insertion, where the ratio of the products might be controlled by a combination of steric and electronic factors.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by Ti(IV) complexes of C2-symmetrical chiral BINOL derivatives

Enantioselective addition of diethylzinc to a series of aromatic aldehydes is developed using new chiral C₂-symmetric ligand (S)-2,2′-(1,1′-binaphthyl-2,2′-diylbis(oxy))bis(methylene)bis(4-nitrophenol) (S)-2b. The catalytic system employing 10 mol % of (S)-2b and 120 mol % of Ti(OiPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes with electron-donating and electron-withdrawing substituents, giving up to 89% ee and up to 95% yield of the corresponding secondary alcohol under mild conditions.     

Subsolidus phase relations and crystal structures of R-Ca-Cu-O (R=Nd, Sm, Gd, Tm) systems

The subsolidus phase relations of R₂O₃-CaO-CuO ternary systems (R=Nd, Sm, Gd, Tm) have been investigated by X-ray powder diffraction. All samples were synthesized at about 950° in air. There exists a ternary compound Ca_14−xR_xCu₂₄O₄₁ (x = 4 for R=Nd, Gd and x = 5 for R = Sm) and a ternary solid solution Ca_2+xR_2−xCu₅O₁₀ (R=Nd, Sm, Gd, Tm) with a wide composition range Δx of about 0.6. The compound Ca_14−xR_xCu₂₄O₄₁ possesses a layered orthorhombic structure and is isostructural to Sr_14−xCa_xCu₂₄O₄₁. The lattice parameters a and c of the compound are basically independent of the ionic radius of R, while the lattice parameter b and unit-cell volume V decrease substantially with the decrease of the ionic radii of R. The Ca_2+xR_2−xCu₅O₁₀ solid solution is isostructural to Ca_2+xY_2−xCu₅O₁₀, the structure of which is based on an orthorhombic “NaCuO₂-type” subcell containing infinite one-dimensional chains of edge-shared square planar cuprate groups crosslinked by the layered cations Ca and R that locate in the inter-chain tunnels.     

RuCl3·3H2O as catalyst for Ferrier rearrangement: an efficient procedure for the preparation of pseudoglycosides

By using RuCl₃·3H₂O as catalyst, an improved method for the synthesis of 2,3-unsaturated-glycosides has been established. A series of 2, 3-unsaturated-glucosides were obtained from 2,4,6-tri-O-acetyl-d-glucal or 3,4-di-O-acetyl-6-deoxy-l-glucal in good yield and high anomeric selectivity.     

Synthesis and structural characterization of Al4Si2C5-homeotypic aluminum silicon oxycarbide, (Al6−xSix)(OyC5−y) (x∼0.8 and y∼1.6)

We have prepared a new layered oxycarbide, [Al_5.25(5)Si_0.75(5)][O_1.60(7)C_3.40(7)], by isothermal heating of (Al_4.4Si_0.6)(O_1.0C_3.0) at 2273 K near the carbon-carbon monoxide buffer. The crystal structure was characterized using X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound is trigonal with space group R3?m (centrosymmetric), Z=3, and hexagonal cell dimensions a=0.32464(2) nm, c=4.00527(14) nm and V=0.36556(3) nm³. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The reliability indices were R_wp=4.45% (S=1.30), R_p=3.48%, R_B=2.27% and R_F=1.25%. The crystal is composed of three types of domains with nearly the same fraction, one of which has the crystal structure of space group R3¯m. The crystal structure of the remaining two domains, which are related by pseudo-symmetry inversion, is noncentrosymmetric with space group R3m.     

Synthesis of the repeating trisaccharide unit of the cell wall lipopolysaccharide of Escherichia coli type 8

NIS/TfOH mediated glycosidation of methyl 3,4,6-tri-O-benzyl-α-d-mannopyranoside with phenyl 2-O-acetyl-3,4,6-tri-O-benzyl-1-thio-α-d-mannopyranoside furnished the corresponding disaccharide derivative in excellent yield and α-selectivity. Zémplen deacetylation of the same followed by reaction with BSP/Tf₂O-preactivated phenyl 4,6-O-benzylidene-2,3-di-O-benzyl-1-thio-α-d-mannopyranoside generated methyl 4,6-O-benzylidene-2,3-di-O-benzyl-β-d-mannopyranosyl-(1→2)-3,4,6-tri-O-benzyl-α-d-mannopyranosyl-(1→2)-3,4,6-tri-O-benzyl-α-d-mannopyranoside in very good yield and excellent β-selectivity. Pd/C catalyzed hydrogenation of the latter finally afforded the repeating trisaccharide of Escherichia coli 8 O-antigen as its methyl glycoside.     

A cyclic trimer of 2-(2-aminophenoxy)propionic acid with a bowl-shaped structure

A cyclic trimer of (R)-2-(2-aminophenoxy)propanoic acid, a δ-amino acid analogue, was synthesized. Molecular mechanics calculations on the cyclic trimer predicted that a concave network of sequential hydrogen bonds forms a C₃-symmetric bowl-shaped structure. Evidence for this conformation was found in the NMR spectra of the trimer in d-chloroform. Although the single-crystal structure of the cyclic trimer indicates that chloroform could be included in the bowl-shaped structure, the conformation was not C₃-symmetric and the hydrogen bonding network was of a different mode. These different conformations between solid and solution were reasonably clear from IR spectra.     

Sm(OTf)3 as a highly efficient catalyst for the synthesis of 2,3-unsaturated O- and S-pyranosides from glycals and the temperature-dependent formation of 4-O-acetyl-6-deoxy-2,3-unsaturated S-pyranosides and 4-O-acetyl-6-deoxy-3-alkylthio glycals

By using Sm(OTf)₃ as the catalyst, synthesis of 2,3-unsaturated-glycosides has been performed. A series of 2,3-unsaturated glycosides were obtained from 3,4,6-tri-O-acetyl–d-glucal or 3,4-di-O-acetyl-l-rhamnal under mild reaction conditions in good yield and high anomeric selectivity. It was found that under certain conditions, reaction of 3,4-di-O-acetyl-l-rhamnal with thiol leads to temperature-dependent formation of C-1-S and C-3-S product. A temperature-dependent profile of the yield of these two products is given.     

Direct and stereoselective synthesis of β-d-mannosides using 4,6-O-benzylidene-protected mannosyl diethyl phosphite as a donor

A direct and practical method for the construction of β-mannosidic linkages is described. While β-selectivities in the TMSOTf-promoted glycosidation of 2,3,4,6-tetra-O-benzyl-d-mannosyl diethyl phosphite are found to be highly dependent on the reactivity of acceptor alcohols, 2,3-di-O-benzyl-4,6-O-benzylidene-d-mannosyl diethyl phosphite reacts with a wide range of acceptor alcohols in the presence of TMSOTf in CH₂Cl₂ at −45 °C to give β-mannosides in high yields with good to high β-selectivities.     

Crystal chemistry and crystallography of the SrR2CuO5 (R=lanthanides) phases

The crystal chemistry and crystallography of the compounds SrR₂CuO₅ (Sr-121, R=lanthanides) were investigated using the powder X-ray Rietveld refinement technique. Among the 11 compositions studied, only R=Dy and Ho formed the stable SrR₂CuO₅ phase. SrR₂CuO₅ was found to be isostructural with the “green phase”, BaR₂CuO₅. The basic structure is orthorhombic with space group Pnma. The lattice parameters for SrDyCuO₅ are a=12.08080(6) Å, b=5.60421(2) Å, c=7.12971(3) Å, V=482.705(4) Å³, and Z=8; and for the Ho analog are a=12.03727(12) Å, b=5.58947(7) Å, c=7.10169(7) Å, V=477.816(9) Å³, and Z=8. In the SrR₂CuO₅ structure, each R is surrounded by seven oxygen atoms, forming a monocapped trigonal prism (RO₇). The isolated CuO₅ group forms a distorted square pyramid. Consecutive layers of prisms are stacked in the b-direction. Bond valence calculations imply that residual strain is largely responsible for the narrow stability of the SrR₂CuO₅ phases with R=Dy and Ho only. X-ray powder reference diffraction patterns for SrDy₂CuO₅ and SrHo₂CuO₅ were determined.