Dimethylcyclam based fluoroionophore having Hg- and Cd-selective signaling behaviors

Diametrically disubstituted bis(anthrylmethyl) derivative of 1,8-dimethylcyclam exhibited pronounced Hg²⁺- and Cd²⁺-selective fluorogenic behaviors in aqueous acetonitrile solution. A distinctive OFF-ON type signaling was observed for Hg²⁺ and Cd²⁺ ions in aqueous acetonitrile (CH₃CN-H₂O = 90:10, v/v) solution, while a selective ON-OFF type switching behavior toward Hg²⁺ ions was observed in solution having higher water content (CH₃CN-H₂O = 50:50, v/v). The detection limit for the analysis of Hg²⁺ ions in 50% aqueous acetonitrile was found to be 3.8 × 10⁻⁶ M. The selective OR logic gate behavior of the prepared compound toward two toxic heavy metal ions of Hg²⁺ and Cd²⁺ ions in CH₃CN-H₂O (90:10, v/v) suggests the possibility as a new chemosensing device for the two important target metal ions.     

Highly selective and sensitive fluorescent chemosensor for Hg in aqueous solution

A new indole-based fluorescent chemosensor 1 was prepared and its metal ion sensing properties were investigated. It exhibits high sensitivity and selectivity toward Hg²⁺ among a series of metal ions in H₂O-EtOH (7:1, v/v). The association constant of the 1:1 complex formation for 1-Hg²⁺ was calculated to be 9.57 × 10³ M⁻¹, and the detection limit for Hg²⁺ was found to be 2.25 × 10⁻⁵ M. Computational results revealed that 1 and Hg²⁺ ion formed with a central tetrahedron-coordinated Hg²⁺.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

A fluorescent chemosensor for Hg based on naphthalimide derivative by fluorescence enhancement in aqueous solution

Naphthalimide derivative (compound 1) containing hydrophilic hexanoic acid group was synthesized and used to recognize Hg²⁺ in aqueous solution. The fluorescence enhancement of 1 is attributed to the formation of a complex between 1 and Hg²⁺ by 1:1 complex ratio (K = 2.08 × 10⁵), which has been utilized as the basis of fabrication of the Hg²⁺-sensitive fluorescent chemosensor. The comparison of this method with some other fluorescence methods for the determination of Hg²⁺ indicated that the method can be applied in aqueous solution rather than organic solution. The analytical performance characteristics of the proposed Hg²⁺-sensitive chemosensor were investigated. The chemosensor can be applied to the quantification of Hg²⁺ with a linear range covering from 2.57 × 10⁻⁷ to 9.27 × 10⁻⁵ M and a detection limit of 4.93 × 10⁻⁸ M. The experiment results show that the response behavior of 1 toward Hg²⁺ is pH independent in medium condition (pH 4.0–8.0). Most importantly, the fluorescence changes of the chemosensor are remarkably specific for Hg²⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the response of the chemosensor toward Hg²⁺ is fast (response time less than 1 min). In addition, the chemosensor has been used for determination of Hg²⁺ in hair samples with satisfactory results, which further demonstrates its value of practical applications.     

Naked-eye colorimetric analysis of Hg2+ with bi-color CdTe quantum dots multilayer films

A novel direct quantificational method through naked-eye colorimetric analysis of Hg²⁺ was constructed based on different degree of the fluorescence quenching of bi-color quantum dots (QDs) multilayer films (2-QDMF). The functional multilayer films were assembled by layer-by-layer (LBL) deposition of oppositely charged CdTe QDs and poly(dimethyldiallylemmonium chloride) (PDDA). Then the outermost layer of 2-QDMF was cross-linked to bovine serum albumin (BSA), polyethylene glycol (PEG) or glutathione (GSH). It was found that when BSA modified quartz slides were immersed into solutions containing Hg²⁺ and Cu²⁺ respectively, the 2-QDMF can be quenched by Hg²⁺, but not by Cu²⁺. Under the optimization conditions, the quenched photoluminescence (PL) intensities of multilayer films were almost linearly proportional to the concentration of Hg²⁺ in the range of 1.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol L⁻¹ and the detection limit was 4.5 × 10⁻⁹ mol L⁻¹. The proposed method is intuitional and convenient, which can be applied to the determination of trace Hg²⁺ in the artificial water sample with satisfactory results.     

A novel colorimetric and fluorescent chemosensor: synthesis and selective detection for Cu and Hg

A novel two-channel metal ion sensor has been synthesized from macrocyclic dioxotetraamine and 1,8-naphthalimide derivative. The metal ion-selective signaling behaviors of the sensor were investigated. The sensor presented the selective coloration for Cu²⁺ and Hg²⁺ that can be detected by the naked-eye, respectively. Besides, the addition of Cu²⁺ and Hg²⁺ quenched the fluorescence of 1 obviously and the detection limit was found to be 3 × 10⁻⁷ M for Cu²⁺ and 7 × 10⁻⁷ M for Hg²⁺. This sensor can be utilized for the visual and spectroscopic detection of Cu²⁺ or Hg²⁺ in the presence of the other competing metal ions.     

A highly selective mercury electrode based on a diamine donor ligand

(H₂NCHMeCH₂NH₂)(H₂O)₂HgCl₂ (I) was synthesised, characterised and used for the fabrication of a potentiometric sensor for Hg²⁺ metal ions. Membrane having I as electroactive material, sodium tetraphenyl borate (NaTPB) as an anion excluder, dibutylamine (DBA) as plasticizer in PVC matrix in the percentage ratio of 10:3:150:150 (I:NaTPB:DBA:PVC) (w/w) exhibits a linear response to Hg²⁺ ions in a concentration range of 1.25 × 10⁻⁵ to 1.0 × 10⁻¹ M having a detection limit of 8.9 × 10⁻⁶ with a slope of 25 ± 0.1 mV over the pH range 6.6-9.3. Selectivity coefficients for Hg(II) relative to a number of interfering ions were investigated. The electrode is highly selective for Hg²⁺ ions over a large number of mono-, bi-, and trivalent cations. Normal interferents like Ag⁺ and Cd²⁺ do not interfere in the working of the electrode. The electrode has also been used successfully in mixtures having a 10% (v/v) methanol and acetone content without showing any considerable change in working concentration range or slope. These electrodes have been found to be chemically inert showing a fast response time of 10 s and were used over a period of 4 months with good reproducibility (s = ±0.2). The electrode was used for determination of mercury in binary mixtures with 100% recovery and thus the proposed sensor can be used for real sample analysis.     

Langmuir-Blodgett film of p-tert-butylthiacalix[4]arene modified glassy carbon electrode as voltammetric sensor for the determination of Hg(II)

The π-A isotherms and UV-vis spectra of the transferred films suggested that the monolayer of p-tert-butylthiacalix[4]arene can coordinate with Hg²⁺ at the air-water surface. From these observations, a glassy carbon electrode coated with Langmuir-Blodgett film of p-tert-butylthiacalix[4] arene as a new voltammetric sensor is designed for the determination of trace amounts of Hg²⁺. Compared with bare glassy carbon electrode and modified glassy carbon electrode using direct coating method, the Langmuir-Blodgett film-modified electrode can greatly improve the measuring sensitivity of Hg²⁺. Under the selected conditions, the Langmuir-Blodgett film-modified electrode in 0.1 mol L⁻¹ H₂SO₄ + 0.01 mol L⁻¹ KCl solution shows a linear voltammetric response for Hg²⁺ in the range of 5.0 × 10⁻¹⁰ to 1.5 × 10⁻⁷ mol L⁻¹, with a detection limit of 2.0 × 10⁻¹⁰ mol L⁻¹. The proposed method was also applied to determine Hg²⁺ in water samples (tap, lake and river water). In addition, the fabricated electrode exhibited a distinct advantage of simple preparation, non-toxicity, good reproducibility and good stability.     

A highly selective pyrene based fluorescent sensor toward Hg detection

A new pyrene-containing fluorescent sensor has been synthesized from 2,3,3-trimethylindolenine. Spectroscopic and photophysical properties of sensor are presented. The large change in fluorescence intensity (I/I₀ = 0.13) at 381 nm and affinity to Hg²⁺ over other cations such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cu²⁺ make this compound a useful chemosensor for Hg²⁺ detection in hydrophilic media. The sensor (6.0 × 10⁻⁶ M) displays significant fluorescence quenching upon addition of Hg²⁺ in pH 7.4 HEPES buffer without excimer formation. Job’s plot analysis shows the binding stoichiometry to be 2:1 (host/guest).     

Synthesis of a novel bistriazene reagent 4,4′-bis[3-(4-phenylthiazol-2-yl)triazenyl]biphenyl and its highly sensitive color reaction with mercury(II)

We report the synthesis of a novel bistriazene, 4,4′-bis(3-(4-phenylthiazol-2-yl)triazenyl)biphenyl (BPTTBP), and its highly sensitive color reaction with Hg²⁺. The new reagent was synthesized in good yield by coupling 2-amino-4-phenylthiazole with 4,4′-biphenyldiamine bisdiazonium salt. Using a blend of surfactants N-cetylpyridinium chloride (CPC) and polyethylene glycol n-octanoic phenyl ether (OP) as a micelle sensitizer, the red colored reagent assembles with Hg²⁺ in pH 9.8 borate buffer according to a 1:1 stoichiometry, forming a blue oligomeric/polymeric chelating complex with a high apparent stability constant (1.1 × 10⁸ M⁻¹). Whereas the maximum absorption of reagent occurs at 510 nm with an extinct coefficient of 1.35 × 10⁴ M⁻¹ cm⁻¹, the complex absorbs at 611 nm, with an apparent extinct coefficient of 1.04 × 10⁵ M⁻¹ cm⁻¹. Beer's law is obeyed in the range of 0-15 μg/25 mL Hg²⁺, and Sandell's sensitivity is 1.92 × 10⁻³ μg/cm². In the presence of thiourea and Na₄P₂O₇ as masking agents, the method was found free from interferences of foreign ions commonly occurring with mercury. The optimized protocol has been successfully applied to spectrophotometric determination of mercury in waste water samples. The features of the new reagent associated with its special structure were discussed, and an unprecedented “domino effect” was proposed to account for its unique chelating stoichiometry with Hg²⁺.     

p-Dimethylaminobenzaldehyde thiosemicarbazone: a simple novel selective and sensitive fluorescent sensor for mercury(II) in aqueous solution

A novel and simple fluorophore, p-dimethylaminobenzaldehyde thiosemicarbazone (DMABTS), was prepared in order to find available fluorescent chemosensor for mercuric ion in aquesous solution. DMABTS emitted fluorescence at 448 nm in aqueous solution and its fluorescence intensity was completely quenched upon interaction with Hg²⁺ ions, which should be attributed to the 1:1 complex formation between DMABTS and Hg²⁺. The binding constant of the complex was determined as 7.48 × 10⁶ mol l⁻¹. The linear range of quantitative detection of 0 to 5.77 × 10⁻⁶ mol l⁻¹ and the detection limit of 7.7 × 10⁻⁷ mol l⁻¹ for Hg²⁺ in the 6.3 × 10⁻⁶ mol l⁻¹ DMABTS aqueous solution were obtained from a calibration curve. The coexistence of several transition metal ions and anions did interfere the fluorometric titration of Hg²⁺ ion by less than 4% in the emission change.     

Hg-selective fluoroionophore of p-tert-butylcalix[4]arene-diaza-crown ether having pyrenylacetamide subunits

A new ionophore having two pyrenylacetamide moieties based on the p-tert-butylcalix[4]arene-diaza-crown ether has been prepared and its fluoroionophoric properties were investigated. Bis(pyrenyl) derivative was found to exhibit selective ON-OFF type sensing behavior toward Hg²⁺ ions over other representative transition and heavy metal ions. The fluorescence quenching efficiency of larger than 20-fold was observed with 100 equiv of Hg²⁺ ions and the association constant was found to be 4.5 × 10⁴ M⁻¹ in methanol. The ionophore also exhibited a very efficient quenching of excimer fluorescence selectively upon treatment with Hg²⁺ ions in 50% aqueous methanol solution. The observed Hg²⁺-selective ON-OFF type fluorescence behavior could be utilized as efficient sensing and switching devices for the design of other supramolecular systems.     

A highly selective fluorescent probe for Hg based on a rhodamine-coumarin conjugate

A fluorescent probe 1 for Hg²⁺ based on a rhodamine-coumarin conjugate was designed and synthesized. Probe 1 exhibits high sensitivity and selectivity for sensing Hg²⁺, and about a 24-fold increase in fluorescence emission intensity is observed upon binding excess Hg²⁺ in 50% water/ethanol buffered at pH 7.24. The fluorescence response to Hg²⁺ is attributed to the 1:1 complex formation between probe 1 and Hg²⁺, which has been utilized as the basis for the selective detection of Hg²⁺. Besides, probe 1 was also found to show a reversible dual chromo- and fluorogenic response toward Hg²⁺ likely due to the chelation-induced ring opening of rhodamine spirolactam. The analytical performance characteristics of the proposed Hg²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Hg²⁺ from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ and the detection limit is 4.0 × 10⁻⁸ mol L⁻¹. The determination of Hg²⁺ in both tap and river water samples displays satisfactory results.     

Development of the diffusive gradient in thin films technique for the measurement of labile mercury species in waters

The diffusive gradients in thin films (DGT) technique, utilizing resin gel with ion-exchange resin Duolite GT73 and new ion-exchange resin Ambersep GT74, was investigated for the accumulation of four mercury species (Hg²⁺, CH₃Hg⁺, C₂H₅Hg⁺, C₆H₅Hg⁺). The diffusion coefficients of mercury species in agarose gel calculated on the basis of Fick’s Law were mercury species-specific. The diffusion coefficients of Hg²⁺ and CH₃Hg⁺ at 25 °C (9.07 ± 0.23 × 10⁻⁶ cm² s⁻¹ and 9.06 ± 0.30 × 10⁻⁶ cm² s⁻¹, respectively) were very similar, but the diffusion coefficients of C₂H₅Hg⁺ (6.87 ± 0.23 × 10⁻⁶ cm² s⁻¹) and C₆H₅Hg⁺ (3.86 ± 0.19 × 10⁻⁶ cm² s⁻¹) were significantly lower. Influence of experimental conditions (pH, selected cations, chlorides and humic substance) on mercury species accumulation by DGT was studied. The DGT technique was applied to river water spiked with mercury species.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Hg-selective fluoroionophoric behavior of pyrene appended diazatetrathia-crown ether

Bis(pyrene) derivative of diazatetrathia-crown ether has been prepared and its Hg²⁺-selective fluoroionophoric properties were investigated. The compound showed a pronounced Hg²⁺-selectivity and other metal ions except for Cu²⁺ showed almost no discernible responses. The Hg²⁺-selectivity of the compound was also confirmed by the competitive experiments performed in the presence of physiologically important metal ions and the detection limit was found to be 1.6 × 10⁻⁶ M. The prominent selective and efficient fluorescence quenching behavior could be utilized as a new chemosensing system for the analysis of toxic Hg²⁺ ions in aqueous environment.     

Hg- and Cu-selective fluoroionophoric behaviors of a dioxocyclam derivative bearing anthrylacetamide moieties

New dioxocyclam derivatives bearing two anthracene fluorophores were prepared, and their fluoroionophoric properties toward transition metal ions were investigated. Chemosensor 2 having anthrylacetamide moieties exhibited pronounced Hg²⁺- and Cu²⁺-selective fluoroionophoric properties in aqueous acetonitrile solution over other representative transition metal ions, as well as alkali and alkaline earth metal ions. Chemosensor 2 also exhibited Hg²⁺ and Cu²⁺ selectivity under competitive conditions in the presence of physiologically and environmentally important metal ions. The detection limits for the sensing of Hg²⁺ and Cu²⁺ ions were 7.8 × 10⁻⁶ and 1.5 × 10⁻⁶ M, respectively, in aqueous 95% acetonitrile solution.     

A novel benzothiazole based azocalix[4]arene as a highly selective chromogenic chemosensor for Hg ion: A rapid test application in aqueous environment

A novel calix[4]arene derivative containing benzothiazole azo groups at the upper rim was synthesized as chromogenic chemosensor, and its binding and sensing properties with heavy metal ions (Pb²⁺, Hg²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Co²⁺, Fe²⁺, Mn²⁺, Cr³⁺, Ag⁺) were investigated by UV-vis spectroscopy and voltammetric techniques. The results of spectroscopic and voltammetric experiments showed that the chromogenic chemosensor has high selectivity towards Hg²⁺ ion over the other heavy metal ions. Moreover, it was shown that the interaction between Hg²⁺ and the chromogenic chemosensor occurs by means of the benzothiazole azo groups at the upper rim by using differential pulse voltammetry. The stoichiometric ratio and the association constant were determined as 1:1 and (6.1 ± 0.3) × 10⁵ L mol⁻¹ for the complex between Hg²⁺ and the ionophore. Furthermore, we prepared a rapid test kit for early detection of Hg²⁺ in aqueous environment in the concentration range of 1 × 10⁻⁴ to 1 × 10⁻² M.     

Neutral carriers based polymeric membrane electrodes for selective determination of mercury (II)

The potentiometric response characteristics of mercury ion-selective membrane electrodes based on 2-amino-6-purinethiol (I₁) and 5-amino-1, 3, 4-thiadiazole-2-thiol (I₂) were described. Ion selectivities were tested for various plasticizers, which were used as solvent mediators to incorporate the ionophores into the membrane. Effects of experimental parameters such as membrane composition, nature and amount of plasticizers and additives, pH and concentration of internal solution on the potential response of Hg²⁺ electrodes were investigated. The best performance was obtained with the electrode having a membrane composition (w/w) of (I₁) (3.17%): PVC (31.7%): DOP (dioctylpthalate) (63.4%): NaTPB (sodium tetraphenylborate) (1.58%). The proposed electrode reveals a Nernstian response over Hg²⁺ ion in the concentration range of 7.0 × 10⁻⁸-1.0 × 10⁻¹ M with limit of detection 4.4 × 10⁻⁸ M. The electrode shows good discrimination toward Hg²⁺ ion with respect to most common cations. It shows a short response time (10 s) for whole concentration range and can be used for 2 months without any considerable divergence in potentials. For evaluation of the analytical applicability, the electrode was used in the determination of Hg²⁺ ion in different environmental and biological samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.