自组装膜

自动形成有序有机薄膜可通过自组装(SA)技术得到.SA成膜技术快速简便, SA膜对热, 时间, 化学环境及外压稳定, 有较高的二维或三维有序性, 是获得超晶格有序材料的一种有效方法, 在非线性光学, 分子器件, 分子生物学及表面材料工程中都有潜在的应用前景.     

Wetting films

Wetting films of nonpolar liquids are stabilized due to action of the repulsion dispersion forces. For aqueous films, it is necessary to takes additionally into account action of electrostatical and structural forces.Disjoining pressure isotherms of a thick methastable β -films of electrolyte and surfactant solutions can be quantitavely described on the basis of theory of long-range electrostatical forces. Thicknesses of thinner α-films of water formed as a result of vapour adsorption depend on the surface hydrophilicity and are controlled by the action of structural repulsion forces.     

Anion-excluding polypyrrole films

A new method for modifying polypyrrole films is described. It involves complete oxidation of the film. The film produced is electronically non-conductive but ionically conductive, and has ion-selective properties based on the exclusion of anionic species. The effective pH within the film can be controlled by the choice of supporting electrolyte used during the oxidative treatment, without loss of selectivity. Cyclic voltammetry is used to demonstrate the effect of film pH on the rate of dopamine oxidation in a neutral supporting electrolyte.     

Room-temperature electrochemical reduction of epitaxial magnetite films to epitaxial iron films

The electrochemical reduction of oxides to metals has been studied for decades. Earlier work produced polycrystalline bulk metals. Here, we report that pre-electrodeposited epitaxial face-centered cubic magnetite thin films can be electrochemically reduced to epitaxial body-centered cubic iron thin films in aqueous solution on single-crystalline gold substrates at room temperature. This technique opens new possibilities to produce special epitaxial metal/metal oxide heterojunctions and a wide range of epitaxial metallic alloy films from the corresponding mixed metal oxides.     

Phospholipid black foam films: dynamic film tension of DMPC bilayer films

The film tension of bilayer Newton black films (NBF) from aqueous dispersions of dimyristoylphosphatidylcholine (DMPC) has been studied in dynamic conditions. The dynamic film tension values γ have been measured using the capillary method for direct measurement of the film tension. Two different solutions have been used: DMPC vesicle suspension in water obtained through sonication, denoted as ‘DMPC(Son)’ (the DMPC adsorption layers are insoluble monolayers) and DMPC dissolved in ethanol plus water mixed solvent, denoted as ‘DMPC(EthW)’ (the DMPC adsorption layers are soluble). Both solutions contain 0.1 M NaCl. The behavior of the dynamic film tension is different for NBF from the two types of solutions. In the case DMPC(Son) γ strongly depends on the film area, while in the case DMPC(EthW) this dependence is less pronounced but still exists. The dependence of the film tension on the film area in case DMPC(Son) is well described by the Frumkin equation modified for bilayer films. Reasonable values of the parameters of Frumkin equation are determined from its fit to the experimental data.     

Interest and durability of multilayers: from model films to complex films

In a first part, this paper focuses on the interest of using a multilayer for vacuum insulation panels envelope. It is shown that piling up layers of metallized poly(ethylene terephthalate) does not seem to improve the initial barrier performance. In parallel, a permeation model to predict barrier properties of multilayer films was developed and validated with experimental results. In a second part, durability of a multilayer composite was investigated using accelerated hydrothermal ageing tests. It is shown that physical properties and in particular barrier properties decrease with ageing time. Polyurethane layer used as adhesive system in multilayer films is responsible for complete degradation of aluminum layer after 6 ageing months at 70°C – 90% relative humidity. Copyright © 2009 John Wiley & Sons, Ltd.     

Dicyanopyrazine-linked porphyrin Langmuir-Blodgett films

We investigated the influence of arachidic acid/cadmium dication (AA/Cd(2+)) as a transfer promoter for the deposition of dicyanopyrazine-linked porphyrin (2-DCPP) Langmuir-Blodgett (LB) films on both hydrophobic and hydrophilic substrates. In the case of LB deposition on a hydrophilic substrate, the presence of AA/Cd(2+) does not improve 2-DCPP LB deposition. The poor transfer in the case of the hydrophilic surface is believed to be due to 2-DCPP not wetting the surface during the down-stroke deposition, and this is not improved by the transfer agent. However, on a hydrophobic substrate, deposition of 2-DCPP is significantly improved by the presence of AA/Cd(2+). Comparison of the UV-visible spectrum of a 2-DCPP LB film with that of 2-DCCP dissolved in chloroform reveals that the Soret and Q bands for the 2-DCPP LB film are broadened and red-shifted due to aggregation of porphyrin rings in the LB film. UV-visible spectral changes and ellipsometry as a function of the number of deposition layers suggest continuous transfer of 2-DCPP/AA onto the hydrophobic substrate and reproducibility in the deposition process. The Soret and Q bands of the 2-DCPP LB film upon acid vapor exposure have also been investigated, and these measurements may have chemical sensor applications.     

Equilibrium thin liquid films

The latest results are reviewed and a number of new concepts of the thermodynamics of thin films are formulated. Current definitions of disjoining pressure and their applications for introducing disjoining pressure into thermodynamics of phase equilibria, as well as the new thermodynamic definition of the thickness of thin film, are considered. New approaches to the rigorous definition of disjoining pressure in curved films and films with nonuniform thickness, including transition zones of wetting films, are analyzed. The modulus of Gibbs’ elasticity is derived for the case of a thin film. The role of the elasticity of this type in thin films and its correlation with traditional transverse (Derjaguin) elasticity related to the disjoining pressure are explained.     

Electroactive hemoglobin-surfactant-polymer biomembrane-like films

Polyions complex 2C12N+ PSS- was prepared by reacting poly(sodium styrenesulfonate) (Na+ PSS-) with didodecyldimethylammonium bromide (2Cl2N+ Br-). Stable thin films made from 2C12N+ PSS- with incorporated redox protein hemoglobin (Hb) on pyrolytic graphite (PG) electrodes were then characterized by electrochemistry and other techniques. Cyclic voltammetry (CV) of Hb-2C12N+ PSS- films showed a pair of well-defined and nearly reversible peaks for HbFe(III)/Fe(II) couple at about -0.17 V vs. saturated calomel electrode (SCE) in pH 5.5 buffers. The electron transfer rate between Hb and PG electrode was greatly facilitated in microenvironment of 2C12N+ PSS- films. Positions of Soret absorption band suggest that Hb keeps its secondary structure similar to its native state in 2C12N+ PSS- films at the medium pH. The results of X-ray diffraction and differential scanning calorimetry (DSC) suggest synthesized lipid 2C12N+ PSS- films have an ordered bilayer structure intercalated between PSS- polyion layers, and the incorporated Hb expands the layer spacing of the films. HbFe(I), a highly reduced form of Hb, might also be produced in these films at about -1.09 V, and could be used to catalytically reduce organohalide pollutants.     

Superconducting organic polymer films

A concept of producing superconducting composites by means of reticulate doping of polymers with low molecular weight organic superconductors is presented. The obtained polycarbonate films contain around 2 wt.% of BEDT-TTF polyiodides in a form of continuous crystalline network. D.c. and microwave conductivity measurements demonstrate, that the as-obtained reticulate composites show semiconducting-type properties. After annealing at optimized conditions a dramatic change occurs and the composites become metallic in the entire temperature range due to a conversion of various phases of the BEDT-TTF polyiodides into the metallic and superconducting β₁-phase. The composites show the superconducting transition below 5 K₁ as evidenced by magnetoresistance measurements, indicating that the content of the β₁-phase microcrystals in the conducting network exceeds the percolation threshold.     

Don't forget Langmuir-Blodgett films

Langmuir-Blodgett (LB) films have been investigated, extensively, over the past 70 years. Despite considerable efforts aimed at exploiting their nonlinear optical, piezoelectric, pyroelectric, semiconducting, sensing and barrier properties, problems associated with film quality and stability have hampered their practical development. This feature article highlights one recent advance in the LB area (i.e., the ionic cross-linking of LB films or "gluing"), which has resulted in single bilayer membranes possessing extraordinary quality and stability. The gluing of LB films provides new opportunities for an old technology that has been waning in recent years.     

Nanostructured anisotropic ion-conductive films

A flexible self-standing film with layered nanostructures was obtained by in situ photopolymerization of a new smectic liquid-crystalline monomer containing a tetra(oxyethylene) moiety, which forms a macroscopically oriented complex with lithium salts. The resultant films show two-dimensional ionic conductivity.     

Photomagnetic hybrid ultrathin films

Two novel types of photomagnetic hybrid ultrathin film (film A and B) of metal cyanides have been fabricated by means of the modified Langmuir–Blodgett method using a smectite clay mineral. Film A is composed of an amphiphilic azobenzene cation, a montmorillonite, and Prussian Blue in which photocontrol in the magnetization was realized by the photoisomerization of azobenzene chromophore. The observed photomagnetic efficiency was large (ca. 11%) due to the well-organized structure of the ultrathin film. Film B is composed of a quaternary ammonium salt, a montmorillonite, and Co–Fe Prussian Blue in which the photoinduced magnetization caused by the electron transfer exhibited an anisotropic response with regards to the direction of the applied magnetic field. This phenomenon is ascribed to the unique structure of Co–Fe Prussian Blue formed onto the clay layer. Contribution to special issue “Magnetic field effects in Electrochemistry”     

Novel porous polyurethane films

Polyurethane films treated in a two-stage process with aqueous bromine and ammonia solutions underwent significant modifications in crystalline and surface structure as well as in mechanical and physical properties. Bromine was sorbed on the film, and formed several charge transfer complexes with the soft and hard segments of the polyurethane as well as bridges between adjacent chains. In the second stage, ammonia reacted with the sorbed bromine producing gaseous nitrogen and ammonium bromide. The expansion of the gas resulted in a repacking of the polymeric chains and the formation of a porous structure. The bromine concentrations used and the times of contact between the films and the bromine were 0.02–0.06 normal and 1–10 min, respectively. The contact angle of the films decreased, depending on treatment conditions, from 73 to 20. The water vapor permeability increased three-fold. The treatment appeared to bring about a crystallization in the hard as well as in the soft segments of the PU as shown by differential scanning calorimetry measurements. Possible applications of the treated films for wound dressing are discussed. © 1998 John Wiley & Sons, Ltd.     

Plasma-deposited metal-containing polymer films

The plasma treatment of vapors containing organometallic compounds (of Pd, Ni, Co, Sn, Au) and various alkenes has been used to prepare thin films, the composition and electrical resistivity of which could be varied over a wide range.     

Solid C58 films

A new solid material has been created in ultra high vacuum by utilizing the aggregation process of C58 molecules deposited onto highly oriented pyrolytic graphite from a mass selected low-energy ion beam comprising C58+. Cluster fluxes of up to 3x10(11) ions s-1 cm-2 with impinging kinetic energies of 6+/-0.5 eV were typically applied. Growth of the solid C58 phase proceeds according to the cluster-aggregation-based Volmer-Weber scenario where initially ramified 2D islands transform into 3D pyramid-like structures at higher coverages. The C58 films created exhibit much higher thermal stability than the C60 solid phase. Sublimation of C58 sets in at a temperature of 700 K. Ultraviolet photoionization spectra (He I, 21.2 eV) yield a molecular ionization potential in the range between 6.6 and 7 eV. Density functional and Hartree-Fock theories suggest that the formation of C58 dimers and higher multimers upon deposition/aggregation gives rise to the high thermal stability and unique electronic properties of this material.