(Liquid + liquid) equilibrium for the ternary systems {heptane + toluene + 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide} and {heptane + toluene + 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide} ionic liquids

The (liquid + liquid) equilibrium (LLE) data for two systems containing heptane, toluene, and 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide ([mpim][Tf₂N]) or 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([amim][Tf₂N]) ionic liquids (ILs) were determined at T = 313.2 K and atmospheric pressure. The effect of a double bond in an alkyl side chain in the imidazolium cation was evaluated in terms of selectivity and extractive capacity. The results show a decrease of the amount of toluene and heptane dissolved in the IL with the allyl group. Thus, the distribution ratios of toluene and heptane of [mpim][Tf₂N] IL are higher than those of [amim][Tf₂N] IL. On the other hand, the separation factor of the [amim][Tf₂N] IL increases comparing to [mpim][Tf₂N] IL. The NRTL model was used to correlate satisfactorily the experimental LLE data for the two studied ternary systems.     

Glass transition behaviour of the quaternary ammonium type ionic liquid, {[DEME][I] + H2O} mixtures

By a simple DTA system, the glass transition temperatures of the quaternary ammonium type ionic liquid, {N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium iodide, [DEME][I] + H₂O} mixtures after quick pre-cooling were measured as a function of water concentration (x mol% H₂O). Results were compared with the previous results of {[DEME][BF₄] + H₂O} mixtures in which double glass transitions were observed in the water concentration region of (16.5 to 30.0) mol% H₂O. Remarkably, we observed the double glass transition phenomenon in {[DEME][I] + H₂O} mixtures too, but the two-T_gs regions lie towards the water-rich side of (77.5 to 85.0) mol% H₂O. These clearly reflect the difference in the anionic effect between ${\text{BF}}_4^{-}$ and I^? on the water structure. The end of the glass-formation region of {[DEME][I] + H₂O} mixtures is around x = 95.0 mol% H₂O, and this is comparable to that of {[DEME][BF₄] + H₂O} mixtures (x = 96.0 mol% H₂O).     

Solubility of CO2 in the ionic liquid [hmim][Tf2N]

New experimental results are presented for the total pressure above liquid mixtures of carbon dioxide and the ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf₂N]). The series of experiments were performed at preset temperature and liquid phase composition by means of a very precise high-pressure view-cell technique based on the synthetic method. A temperature range from (293.15 to 413.2) K was investigated where the maximum pressure reached approximately 10 MPa. Gas molalities in [hmim][Tf₂N] ranged up to about 4.7 mol · kg⁻¹. The (extended) Henry’s law is successfully applied to correlate the solubility pressures.     

Solubility of H2S in ionic liquids [hmim][PF6], [hmim][BF4], and [hmim][Tf2N]

The solubility of hydrogen sulphide in three ionic liquids, viz. 1-hexyl-3-methylilmidazolium hexafluorophosphate ([hmim][PF₆]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim][BF₄]), and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([hmim][Tf₂N]), at temperatures ranging from 303.15 K to 343.15 K and pressures up to 1.1 MPa were determined. The solubility values were correlated using the Krichevsky–Kasarnovsky equation and Henry’s constants were obtained at different temperatures. Partial molar thermodynamic functions of solvation such as standard Gibbs free energy, enthalpy, and entropy were calculated from the solubility results. Comparison of the values obtained show that the solubility of H₂S in these three ionic liquids was in the sequence: [hmim][BF₄] > [hmim][PF₆] ≈ [hmim][Tf₂N].     

Effect of ionic liquids on (vapor + liquid) equilibrium behavior of (water + 2-methyl-2-propanol)

Isobaric T, x, y data were reported for ternary systems of {water + 2-methyl-2-propanol (tert-butyl alcohol, TBA) + ionic liquid (IL)} at p = 100 kPa. When the mole fraction of TBA on IL-free basis was fixed at 0.95, measurements were performed at IL mass fractions from 0.6 down to 0.05, in a way of repeated synthesis. The vapor-phase compositions were obtained by analytical methods and the liquid-phase compositions were calculated with the aid of mass balances. Activity coefficients of water and TBA were obtained without the need of a thermodynamic model of the liquid-phase. Six ILs, composed of an anion chosen from [OAc]^? or [Cl]^?, and a cation from [emim]⁺, or [bmim]⁺, or [hmim]⁺, were studied. Relative volatility and activity coefficients were presented in relation with the IL mole fraction, showing the effect of the ILs on a molar basis. The effect of the ILs on relative volatility of TBA to water was depicted by the effect of anions and cations on, respectively, the activity coefficients of water and TBA. The results indicated that, among the six ILs studied, [emim][Cl] has the most significant effect on enhancement of the relative volatility, which reaches a value of 7.2 at an IL mass fraction of 0.58. Another IL, [emim][OAc], has also significant effect, with an appreciable value of 5.2 for the relative volatility when the IL mass fraction is 0.6. Considering the relatively low viscosity and melting point of [emim][OAc], it might be a favorable candidate as solvent for the separation of water and TBA by extractive distillation. Simultaneous correlation by the NRTL model was presented for both systems of (water + ethanol + IL) and (water + TBA + IL), using consistent binary parameters for water and IL.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

Densities and viscosities for ionic liquids mixtures containing [eOHmim][BF4], [bmim][BF4] and [bpy][BF4]

Densities and viscosities of binary ionic liquids mixtures, 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) were measured over the entire mole fraction from T = (298.15 to 343.15) K. The excess molar volumes were calculated and correlated by Redlich–Kiser polynomial expansions. The viscosities for pure ionic liquids were analyzed by means of the Vogel–Tammann–Fulcher equation and ideal mixing rules were applied for the ILs mixtures.     

Thermodynamic studies of the ionic liquid 1-hexyl-3-methylimidazolium chloride [C6mim][Cl] in polyethylene glycol aqueous solutions

Vapour pressure osmometery (VPO) measurements at T = 308.15 K for {[C₆mim][Cl] + water}, {[C₆mim][Cl] + (0.005, 0.0155, and 0.0263) mol · kg⁻¹ PEG2000 + water} and {[C₆mim][Cl] + (0.0017, 0.0052, and 0.0088) mol · kg⁻¹ PEG6000 + water} systems and isopiestic measurements at T = 298.15 K for {[C₆mim][Cl] + PEG2000 + water} and {[C₆mim][Cl] + PEG6000 + water} systems have been carried out. The VPO measurements were carried out at very low concentrations of PEG and from which the values of the water activities, osmotic coefficients, vapour pressure and activity coefficients were obtained. The data obtained from the VPO method show that over the whole concentration range of the ionic liquid (IL), the activity coefficients of [C₆mim][Cl] in the presence of PEG2000 are increased. Although, at high IL concentrations, the values of the activity coefficient of [C₆mim][Cl] in the presence of PEG6000 are also increased, however for low concentrations of IL the values of the activity coefficient of [C₆mim][Cl] in pure water are larger than those in aqueous PEG6000 solutions. For a known IL concentration, the values of water activity coefficient for the binary {[C₆mim][Cl] + water} system are larger than those for the ternary {[C₆mim][Cl] + PEG + water} systems and decrease by increasing the concentration of PEG or decreasing the molar mass of PEG. The constant water activity lines of the all ternary systems obtained from the isopiestic method show positive deviation from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

High-pressure phase equilibria of {carbon dioxide (CO2) + n-alkyl-imidazolium bis(trifluoromethylsulfonyl)amide} ionic liquids

Ionic liquids (ILs) and carbon dioxide (CO₂) systems have unique phase behavior that has been applied to applications in reactions, extractions, materials, etc. Detailed phase equilibria and modeling are highly desired for their further development. In this work, the (vapor + liquid) equilibrium, (vapor + liquid + liquid) equilibrium, and (liquid + liquid) equilibrium of n-alkyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide ionic liquids with CO₂ were measured at temperatures of (298.15, 323.15, 343.15) K and pressure up to 25 MPa. With a constant anion of bis(trifluoromethylsulfonyl)amide, the n-alkyl chain length on the cation was varied from 1-ethyl-3-methyl-imidazolium ([EMIm][Tf₂N]), 1-hexyl-3-methyl-imidazolium ([HMIm][Tf₂N]), to 1-decyl-3-methyl-imidazolium ([DMIm][Tf₂N]). The effects of the cation on the phase behavior and CO₂ solubility were investigated. The longer alkyl chain lengths increase the CO₂ solubility. The Peng–Robinson equation of state with van der Waals 2-parameter mixing rule with estimated IL critical properties were used to model and correlate the experimental data. The models correlate the (vapor + liquid) equilibrium and (liquid + liquid) equilibrium very well. However, extrapolation of the model to much higher pressures (>30 MPa) can results in the prediction of a mixture critical point which, as of yet, has not been found in the literature.     

(Solid + liquid) equilibria predictions of ionic liquid containing systems using COSMO-RS

(Solid + liquid) equilibria (SLE) prediction are an important phase equilibria property for ionic liquid (IL) mixtures especially when the IL exists as a solid. In this work, the SLE for the binary systems of (IL + thiophene) consisting of the ILs: n-butyl-4-methylpyridinium tosylate [BM₄Py][TOS], n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS], n-hexyl-3-methylpyridinium tosylate [HM₃Py][TOS], and 1,4-dimethylpyridinium tosylate [M_1,4Py][TOS] are predicted using the quantum chemical based COSMO-RS (COnductor like Screening MOdel for Real Solvents) model. Initially, benchmarking studies are performed on binary mixtures which are known beforehand. The values of the predicted solubility are then compared with the experimental results by calculating the root mean square error (RMSE). The SLE predictions of the solubility of pyrene and dibenzothiophene in five different solvents were carried out giving an average RMSE of 4%. Further the applicability of COSMO-RS to binary systems consisting of (ionic liquid + alcohol) mixtures and (ionic liquid + hydrocarbons) are predicted. The ionic liquids concerned are n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS] while the alcohols and hydrocarbons are 1-butanol, 1-hexanol, 1-octanol, 1-decanol, and benzene, toluene, ethylbenzene, n-propylbenzene respectively. The experimental data for the ionic liquid [BM₄Py][TOS] with thiophene gave the smallest deviation of 10.2%. The overall RMSE for IL–thiophene, IL–alcohol, and IL–hydrocarbons were 15%, 17.2% and 12.9% respectively. Thus the predicted solubility values were found to be in reasonable agreement with the experimental values.     

Coexistence curves of ionic liquid in oil microemulsions of {[bmim][BF4] + T-X100 + cyclohexane} with various molar ratio of [bmim][BF4] to T-X100 in the critical region

The coexistence curves (T, n), (T, Φ), and (T, Ψ) (n, Φ, and Ψ are the refractive index, volume fraction, and effective volume fraction, respectively) for the ionic liquid microemulsion systems of {polyoxyethylene tert-octylphenyl ether (T-X100) + 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + cyclohexane} with various molar ratio (ω) of [bmim][BF₄] to T-X100 have been determined by measuring refractive indices at a constant pressure in the critical region. The critical temperatures (T_c) and critical volume fraction (Φ_c) were obtained for the ionic liquid microemulsions. The critical exponents were deduced precisely from the coexistence curves within about 1 K below T_c and the values were consistent with the 3D Ising value.     

Volumetric properties of ternary (IL + 2-propanol or 1-butanol or 2-butanol + ethyl acetate) systems and binary (IL + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate) systems

The experimental densities for the binary or ternary systems were determined at T = (298.15, 303.15, and 313.15) K. The ionic liquid methyl trioctylammonium bis(trifluoromethylsulfonyl)imide ([MOA]⁺[Tf₂N]⁻) was used for three of the five binary systems studied. The binary systems were ([MOA]⁺[Tf₂N]⁻ + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate). The ternary systems were {methyl trioctylammonium bis(trifluoromethylsulfonyl)imide + 2-propanol or 1-butanol or 2-butanol + ethyl acetate}. The binary and ternary excess molar volumes for the above systems were calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was fitted to the binary excess molar volume data. Virial-Based Mixing Rules were used to correlate the binary excess molar volume data. The binary excess molar volume results showed both negative and positive values over the entire composition range for all the temperatures.The ternary excess molar volume data were successfully correlated with the Cibulka equation using the Redlich–Kister binary parameters.     

Phase behavior of {carbon dioxide + [bmim][Ac]} mixtures

Carbon dioxide solubility {(vapor + liquid) equilibria: VLE} in ionic liquid, 1-butyl-3-methylimidazolium acetate ([bmim][Ac]), has been measured with a gravimetric microbalance at four isotherms about (283, 298, 323, and 348) K up to about 2 MPa. (Vapor + liquid + liquid) equilibria (VLLE: or liquid–liquid separations) have also been investigated with a volumetric method used in our previous works, since the present analysis of the VLE data using our equation-of-state model has predicted the VLLE at CO₂-rich side solutions. The prediction for the VLLE has been confirmed experimentally. CO₂ solubilities at the ionic liquid-rich side show extremely unusual behaviors; CO₂ dissolves in the ionic liquid to a great degree, but there is hardly any vapor pressure above these mixtures up to about 20 mol% of CO₂. It indicates that CO₂ may have formed a non-volatile or very low vapor pressure molecular complex with the ionic liquid. The thermodynamic excess properties (enthalpy, entropy, and Gibbs free energy) of the present system do support such a complex formation. We have conducted several other experiments to investigate the complex formation (or chemical reactions), and conclude that a minor chemical reaction occurs but the complex formation is reversible without much degradation of the ionic liquid.     

Experiments and model for the surface tension of (MDEA + [Bmim][BF4]) and (MDEA + [Bmim][Br]) aqueous solutions

The surface tension (γ) of 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF₄]), 1-butyl-3-methylimidazolium bromide ([Bmim][Br]), (N-methyldiethanolamine(MDEA) + [Bmim][BF₄]) and (MDEA + [Bmim][Br]) aqueous solutions were measured by using the BZY-1 surface tension meter. The temperature ranged from (293.2 to 323.2) K. The mass fraction of MDEA ranged from 0.35 to 0.45. A thermodynamic equation was proposed to model the surface tension of (MDEA + ionic liquids) (ILS) aqueous solutions and the calculated results agreed well with the experiments. The effects of temperature, mass fractions of MDEA and ILS on the surface tension were demonstrated on the basis of experiments and calculations.     

(Liquid + liquid) equilibria for mixtures of dodecane and ethanol with alkylsulfate-based ionic liquids

The ternary (liquid + liquid) equilibrium (LLE) data for mixtures of dodecane (C₁₂H₂₆) and ethanol with ionic liquids 1,3-dimethylimidazolium methylsulfate [Mmim][MeSO₄], 1-ethyl-3-methylimidazolium methylsulfate, [Emim][MeSO₄] and 1-butyl-3-methylimidazolium methylsulfate, [Bmim][MeSO₄], were studied at T = 298.15 K and 0.101 MPa. The selectivity and solute distribution coefficient ratios determined from the data were used to examine the possibility of using these ionic liquids for extraction of ethanol from dodecane. The temperature dependency was investigated by measuring the LLE data for {dodecane + ethanol + [Mmim][MeSO₄]} at T = 313.15 K and 0.101 MPa. The Othmer–Tobias and Hand equations were used to test the consistency of the tie-line data. The tie-line data were correlated with the Non-Random Two Liquid (NRTL) equation which provided a good model and representation for the experimental results.     

(Liquid + liquid) equilibria for ternary mixtures of (alkane + benzene + [EMpy] [ESO4]) at several temperatures and atmospheric pressure

In this work, the separation of benzene from aliphatic hydrocarbons (hexane, or heptane) is investigated by extraction with 1-ethyl-3-methylpyridinium ethylsulphate ionic liquid, [EMpy][ESO₄]. (Liquid + liquid) equilibria (LLE) data are determined for the ternary systems: {hexane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15, 293.15, 298.15, and 303.15) K and {heptane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. The selectivity and distribution coefficient, derived from the tie line data, were used to determine whether the ionic liquid is a good solvent for the extraction of aromatic from aliphatic compounds. The consistency of the tie line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL equation. A study of the temperature effect and the influence of the chain length of the alkanes were realized. The results obtained were compared with other ionic liquids. There are no literature data for the mixtures discussed in this paper.     

Quaternary (liquid + liquid) equilibrium data for the extraction of toluene from alkanes using the ionic liquid [EMim][MSO4]

(Liquid + liquid) equilibrium (LLE) studies for the extraction of aromatics from alkanes present in the petroleum fractions are important to develop theoretical/semiempirical (liquid + liquid) equilibrium models, which are used in the design of extraction processes. In this work, the ionic liquid 1-ethyl-3-methylimidazolium methylsulfate, [EMim][MSO₄], was evaluated as potential solvent for the separation of toluene from heptane and cyclohexane. The LLE data for the quaternary system {heptane (1) + cyclohexane (2) + toluene (3) + [EMim][MSO₄] (4)} were experimentally determined at T = 298.15 K and atmospheric pressure. Moreover, the LLE data for the ternary systems {heptane or cyclohexane (1) + toluene (2) + [EMim][MSO₄] (3)} were also determined. Solute distribution ratios and selectivities were calculated and analysed in order to evaluate the capability of the ionic liquid to accomplish the separation target. A comparison between the solute distribution ratios and selectivities for the quaternary and the ternary systems was also made. Finally, the experimental tie-line data were correlated with the NRTL model.     

Solubility of CO2 in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]⁺) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF₆]^?), trifluoromethanesulfonate ([OTf]^?), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]^?) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky–Kasarnovsky equation and Henry’s law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO₂ in the ILs studied follows the same behaviour as the corresponding conventional 1-ethyl-3-methylimidazolium ([emim]⁺) based ILs with the same anions, i.e. [hemim][NTf₂] > [hemim][OTf] > [hemim][PF₆] > [hemim][BF₄].     

Application of a group contribution equation of state for the thermodynamic modeling of binary systems (gas + ionic liquids) with bis[(trifluoromethyl)sulfonyl]imide anion

The properties of ionic liquids (ILs) can be modified by appropriate selection of cations and anions. Even if an infinite number of ionic liquids can be generated, only a limited number of families of anions and cations are used. The group contribution equation of state (GC-EoS) is a promising method for calculating the phase behavior of systems with ILs. If the parameters of the characteristic functional group of a IL family are fitted by using data of a reduced number of ILs of the family, then the phase behavior of all the ILs of the same family can be predicted using exclusively the data of the pure components. Previously, the parameters of the IL families with an imidazolium-based cation and the anions PF₆, BF₄NO₃, and Tf₂N were fitted to experimental data [19], and some ternary systems (CO₂ + organics + ionic liquid [bmim][BF₄]) were also modeled [22]. In this work, the GC-EoS was used to calculate phase behavior of gases {(CO₂, O₂, or SO₂) + ionic liquids} with Tf₂N anion and cations of the families 2,3-dimethyl-imidazolium, 1-alkyl-1-methyl-pyrrolidinium, and 1-alkyl-3-methyl-pyridinium. The GC-EoS was able to reproduce experimental data with deviations of the same order of experimental uncertainty. With the correlated parameters it will be possible to predict the phase behavior of systems with ILs of the families considered in this work.