Synthesis of imprinted polymer material with palladium ion nanopores and its analytical application

Ion imprinted polymer (IIP) materials with nanopores were prepared by formation of ternary complex of palladium imprint ion with dimethylglyoxime (DMG) and 4-vinylpyridine (VP, functional monomer) and thermally copolymerizing with styrene (crosslinking monomer) and divinylbenzene (cross linker) and 2,2′-azobisisobutyronitrile as initiator. The synthesis was carried out with cyclohexanol as porogen and subsequently leached with 50% (v/v) HCl to obtain leached IIP particles. These leached IIP particles can now pick up palladium ions from dilute aqueous solutions. The optimal acidity for quantitative enrichment was 0.2-0.4N HCl and eluted completely by stirring for 15 min with 2×10 ml of 50% (v/v) HCl. The palladium ion imprinting polymer gave 100 times higher distribution ratio than ion recognition (blank) polymer (IRP). Further, percent extraction, distribution ratio and selectivity coefficients of palladium and other selected inorganic ions using IRP and IIP particles were determined and compared. Five replicate determinations of 50 μg of palladium in 1 l of solution gave a mean absorbance of 0.200 with a relative standard deviation of 2.12%. The detection limit corresponding to three times the standard deviation of the blank was 2.5 μg of palladium/l.     

Synthesis of nano-pore size Al(III)-imprinted polymer for the extraction and preconcentration of aluminum ions

In this study, an ion imprinted polymer (IIP) was prepared for the selective separation and preconcentration of trace levels of aluminum. Al(III) IIP was synthesized in the presence of Al(III)-8-hydroxyquinoline (oxine) complex using styrene and ethylene glycol dimethacrylate as a monomer and crosslinker, respectively. The imprinted Al(III) ions were completely removed by leaching the IIP with HCl (50 % v/v) and were characterized by FTIR and scanning electron microscopy. The maximum sorption capacity for Al(III) ions was found to be 3.1 mg g^?1 at pH 6.0. Variables affecting the IIP solid phase extraction were optimized by the univariable method. Under the optimized conditions, a sample volume of 400 mL resulted in an enhancement factor of 194. The detection limit (defined as 3 S _b/m) was found to be 1.6 μg L^?1. The method was successfully applied to the determination of aluminum in natural water, fruit juice and cow milk samples.     

Preconcentrative separation of palladium(II) using palladium(II) ion-imprinted polymer particles formed with different quinoline derivatives and evaluation of binding parameters based on adsorption isotherm models

Palladium(II) ion-imprinted polymer (IIP) materials were synthesized by thermally polymerizing the ternary complexes of palladium(II) with amino (AQ) or hydroxy (HQ) or mercapto (MQ) derivatives of quinoline and 4-vinyl-pyridine. The functional and crosslinking monomers used during polymerization were 2-hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EGDMA). 2,2′-Azobisisobutyronitrile (AIBN) and 2-methoxy ethanol were used as the initiator and porogen, respectively. The resulting polymer materials were dried in an oven at 80 °C, ground and sieved to obtain IIP particles which were then subjected to leaching with 50% (v/v) HCl to obtain the leached palladium(II) IIP particles. Control polymer (CP) particles were also prepared by following the above procedure described for IIP particles. The CP particles, unleached and leached AQ-based IIP particles were then characterized by IR, XRD and microanalysis studies. Analytical studies such as preconcentration of palladium(II) from dilute aqueous solutions and separation studies in the presence of selected noble and base metals which co-exist with palladium(II) in its ore or mineral deposits were systematically studied using CP and IIP particles and are compared. AQ-based IIP particles gave higher percent extraction and selectivity coefficients compared to HQ- or MQ-based IIP particles. Five replicate determinations of 25 μg of palladium(II) present in 500 ml of aqueous solution, when subjected to preconcentration and determination by iodide-Rhodamine 6G procedure gave a mean absorbance of 0.104 with a relative standard deviation of 2.25%. The detection limit corresponding to three times the standard deviation of the blank was found to be 5.0 μg of palladium(II) per litre. The rebinding studies using AQ-, HQ- and MQ-based IIPs were carried out and were fitted to the different adsorption isotherm models, viz. Langmuir (L), Freundlich (F) and Langmuir-Freundlich (LF). These adsorption models were used for the evaluation of binding parameters and in elucidating the nature and type of bonding in the IIPs. The results of rebinding experiments showed discrimination between the three IIPs based on the donor atoms of the ligands.     

Influence of binary/ternary complex of imprint ion on the preconcentration of uranium(VI) using ion imprinted polymer materials

Ion imprinted polymer (IIP) materials were prepared for uranyl ion (imprint ion) by forming binary (5,7-dichloroquinoline-8-ol (DCQ) or 4-vinylpyridine (VP)) or ternary (5,7-dichloroquinoline-8-ol and 4-vinylpyridine) complexes in 2-methoxy ethanol (porogen) and copolymerizing in the presence of styrene and divinyl benzene as functional and crosslinking monomers, respectively and 2,2′-azobisisobutyronitrile as initiator. IIP particles were obtained by leaching the imprint ion in these polymer materials with 50% (v/v) hydrochloric acid, filtering, drying in an oven at 50 °C and grinding. Control polymer particles were also prepared under identical conditions. The above synthesized polymer particles were characterized by IR, CHN, X-ray diffraction, and pore size analyses. These leached polymer particles can now pick up uranyl ions from dilute aqueous solutions. The IIP particles obtained with ternary complex of uranyl ion alone gave quantitative enrichment of traces of uranyl ions from dilute aqueous solutions. The optimal pH for quantitative enrichment is 4.5-7.5 and eluted completely with 10 ml of 1.0 M HCl. The retention capacity of uranyl IIP particles was found to be 34.05 mg of uranyl ion per gram of polymer. Further, the percent extraction, distribution ratio, and selectivity coefficients of uranium and other selected inorganic ions were also evaluated. Five replicate determinations of 25 μg of uranium present in 1.0 l of aqueous solution gave a mean absorbance of 0.036 with a relative standard deviation of 2.50%. The detection limit corresponding to three times the standard deviation of the blank was found to be 5 μg l⁻¹.     

Ternary ion-association complex based ion imprinted polymers (IIPs) for trace determination of palladium(II) in environmental samples

A new ion imprinted polymer (IIP) material was synthesized by co-polymerization of palladium-iodide-vinyl pyridinium/palladium-thiocyanate-vinyl pyridinium ion ternary ion-association complex taken in methanol/DMSO with 2-hydroxyethyl methacrylate (functional monomer) and ethylene glycol dimethacrylate (crosslinking monomer) in the presence of 2,2′-azobisisobutryonitrile (initiator). The imprinted anionic species [PdI₄]²⁻ or [Pd(SCN)₄]²⁻ were removed by leaching the dried and powdered materials particles for 18 h with 6 M HCl to obtain leached IIP particles. Non-imprinted/control polymers were also prepared in a similar fashion without the template. Various parameters that influence the percent extraction of palladium, viz. concentration of KI or KSCN, pH, weight of polymer particles, preconcentration and elution times, aqueous phase volume, etc., were systematically studied for both the systems, i.e., in batch as well as flow injection modes. As the on-line flow injection-flame atomic absorption spectrometric (FI-FAAS) allow offer higher enrichment factor, better precision and can analyze more samples for a given time, compared to batch method, this procedure is preferred for the analysis of palladium present in the street/fan blade dust samples collected from busy cities of India and the values obtained were compared with the standard ICPMS values.     

Ion imprinted polymer particles for separation of yttrium from selected lanthanides

Lanthanide(III) (Dy, Gd, Tb and Y) ion imprinted polymer (IIP) materials were synthesized via single pot reaction by mixing lanthanide imprint ion with 5,7-dichloroquinoline-8-ol, 4-vinylpyridine, styrene, divinylbenzene and 2,2'-azobisisobutyronitrile in 2-methoxyethanol porogen. The imprint ion was removed by stirring the above materials (after powdering) with 6 mol/L HCl to obtain the respective lanthanide IIP particles. Y-Dy, Y-Gd and Dy-Gd polymer particles were obtained by physically mixing equal amounts of the respective leached individual lanthanide(III) particles. Control polymer (CP) particles were similarly prepared without imprint ion. Application of the above synthesized polymer particles was tested for separation of Y from Dy, Gd and Tb employing batch and column SPE methods using inductively coupled plasma atomic emission spectrometry for the determination. Optimization studies show that Y present in 500 mL can be preconcentrated using Dy-Gd IIP particles and eluted with 20 mL of 1.0 mol/L of HCl, providing an enrichment factor of approximately 25. Dy-Gd IIP particles offer higher selectivity coefficients for Y over other lanthanides compared to other IIP particles and commercial liquid-liquid extractants. Selectivity studies for Y over other coexisting inorganic species (other than lanthanides) were also conducted and the results obtained show a quantitative separation of Y from other inorganics other than Cu(II) and Fe(III). Furthermore, both batch and column studies indicate the purification of yttrium concentrate from 55.0 +/- 0.2 to 65.2 +/- 0.2% in a single stage of operation.     

Ion imprinted polymer particles: synthesis, characterization and dysprosium ion uptake properties suitable for analytical applications

Dysprosium(III) ion imprinted polymer particles were prepared by the copolymerization of styrene monomers and a crosslinking agent divinylbenzene in the presence of dysprosium(III)-5,7-dichloroquinoline-8-ol-4-vinyl pyridine ternary complex wherein dysprosium(III) ion is the imprint ion and is used to form the imprinted polymer. The dysprosium(III) ion was removed from polymer particles by leaching with 1:1 HCl which leaves a cavity in the polymer particles. The polymer particles both prior to and after leaching have been characterized by IR, TGA, DTA and XRD studies. The leached particles selectively preconcentrated dysprosium ion from dilute aqueous solutions as determined spectrophotometrically using Arsenazo-I as reagent. The optimum pH value for quantitative enrichment is 6-9 and desorption can be achieved by using 25 ml of 1 mol/l of HCl. The retention capacity of the polymer particles was found to be 40.15 mg/g, which is much higher than MIPs prepared by other imprinting techniques. The dysprosium ion imprinting polymer gave 40 times higher distribution ratio for dysprosium ion compared to blank polymer. More significantly the selectivity coefficients of dysprosium compared to other lanthanides results in enhancement by 60-180-fold. The separation factors with respect to other selected lanthanides were also compared with liquid-liquid extractive separation using di-2-ethylhexyl phosphoric acid (D2EHPA) as extractant. The selectivity of dysprosium ion imprinting polymer (IIP) particles for dysprosium over yttrium is much higher and comparable in case of Nd and Lu when compared to conventional extractant such as D2EHPA in liquid-liquid extraction (LLE). Five replicate determinations of 50 μg of dysprosium present in 250 ml of sample gave a mean absorbance of 0.150 with a relative standard deviation of 2.42%. The detection limit corresponding to three times the standard deviation of the blank was found to be 2 μg/250 ml.     

Chemically-modified activated carbon with ethylenediamine for selective solid-phase extraction and preconcentration of metal ions

A new method that utilizes ethylenediamine-modified activated carbon (AC-EDA) as a solid-phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Fe(III), Hg(II) and Pb(II) prior to the measurement by inductively coupled plasma optical emission spectrometry (ICP-OES). The new sorbent was prepared by oxidative surface modification. Experimental conditions for effective adsorption of trace levels of Cr(III), Fe(III), Hg(II) and Pb(II) were optimized with respect to different experimental parameters using batch and column procedures in detail. The optimum pH value for the separation of metal ions simultaneously on the new sorbent was 4.0. Complete elution of absorbed metal ions from the sorbent surface was carried out using 3.0 mL of 2% (%w/w) thiourea and 0.5 mol L⁻¹ HCl solution. Common coexisting ions did not interfere with the separation and determination of target metal ions. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 39.4, 28.9, 60.5 and 49.9 mg g⁻¹ for Cr(III), Fe(III), Hg(II) and Pb(II), respectively. The time for 94% adsorption of target metal ions was less than 2 min. The detection limits of the method was found to be 0.28, 0.22, 0.09 and 0.17 ng mL⁻¹ for Cr(III), Fe(III), Hg(II) and Pb(II), respectively. The precision (R.S.D.) of the method was lower 4.0% (n = 8). The prepared sorbent as solid-phase extractant was successfully applied for the preconcentration of trace Cr(III), Fe(III), Hg(II) and Pb(II) in natural and certified samples with satisfactory results.     

Solid phase selective separation and preconcentration of Cu(II) by Cu(II)-imprinted polymethacrylic microbeads

Ion-imprinted polymer (IIP) particles are prepared by copolymerization of methacrylic acid as monomer, trimethylolpropane trimethacrylate as crosslinking agent and 2,2′-azo-bis-isobutyronitrile as initiator in the presence of Cu(II), a Cu(II)-4-(2-pyridylazo)resorcinol (Cu(II)-PAR) complex, and PAR only. A batch procedure is used for the determination of the characteristics of the Cu(II) solid phase extraction from the IIP produced. The results obtained show that the Cu(II)-PAR IIP has the greatest adsorption capacity (37.4 μmol g⁻¹ of dry copolymer) among the IIPs investigated. The optimal pH value for the quantitative preconcentration is 7, and full desorption is achieved by 1 M HNO₃. The selectivity coefficients (S_Cu/Me) for Me = Ni(II), Co(II) are 45.0 and 38.5, respectively. It is established that Cu(II)-PAR IIPs can be used repeatedly without a considerable adsorption capacity loss. The determination of Cu(II) ions in seawater shows that the interfering matrix does not influence the preconcentration and selectivity values of the Cu(II)-PAR IIPs. The detection and quantification limits are 0.001 μmol L⁻¹ (3σ) and 0.003 μmol L⁻¹ (6σ), respectively.     

1-(2-Formamidoethyl)-3-phenylurea functionalized activated carbon for selective solid-phase extraction and preconcentration of metal ions

A novel method that utilizes 1-(2-formamidoethyl)-3-phenylurea-modified activated carbon (AC-1-(2-formamidoethyl)-3-phenylurea) as a solid-phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions for effective adsorption of trace levels of Cr(III), Cu(II), Fe(III) and Pb(II) were optimized using batch and column procedures in detail. The optimum pH value for the separation of metal ions simultaneously on the new sorbent was 4. And the adsorbed metal ions could be completely eluted by using 2.0 mL 2.0 mol L⁻¹ HCl solution. Common coexisting ions did not interfere with the separation and determination of target metal ions. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 39.8, 39.9, 77.8 and 17.3 mg g⁻¹ for Cr(III), Cu(II), Fe(III) and Pb(II), respectively. The detection limits of the method were found to be 0.15, 0.41, 0.27 and 0.36 ng mL⁻¹ for Cr(III), Cu(II), Fe(III) and Pb(II), respectively. The relative standard deviation (RSD) of the method was lower than 4.0% (n = 8). The method was successfully applied for the preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) in natural and certified samples with satisfactory results.     

Chemically modified attapulgite with asparagine for selective solid-phase extraction and preconcentration of Fe(III) from environmental samples

A new method that utilizes asparagine modified attapulgite as a solid phase extractant has been developed for preconcentration of trace Fe(III) prior to the measurement by inductively coupled plasma optical emission spectrometry. Characterization of the surface modification was performed on the basis of Fourier transform infrared spectra. The separation/preconcentration conditions of the analyte were investigated, including the pH value, the shaking time, the sample ?ow rate and volume, the elution condition and the interfering ions. At pH 4, the new adsorbent had relatively high capacity and enrichment factor compared to other methods reported so far. The adsorbed Fe(III) was quantitatively eluted by 2 mL of 0.5 mol L⁻¹ HCl. Common coexisting ions did not interfere with the separation. The detection limit of the method was 0.19 μg L⁻¹. The relative standard deviation was 3.4% (n = 8) which indicated that the method had good precision for the analysis of trace Fe(III) in solution samples. The method was validated using two certified reference materials and has been applied for the determination of trace Fe(III) in biological and natural water samples with satisfactory results.     

Effect of gamma-irradiation of ion imprinted polymer (IIP) particles for the preconcentrative separation of dysprosium from other selected lanthanides

The selectivity of zinc with respect to copper ions was improved by γ-irradiation of surface imprinted polymer particles. We have reported the preparation of dysprosium ion imprinted polymer (IIP) particles by covalent approach during molecular imprinting. This paper reports the results obtained after γ-irradiation of dysprosium IIP particles and their use in the preconcentration/separation of dysprosium from dilute aqueous solutions containing other selected lanthanides. Further, the characterisation of blank and dysprosium IIP particles was carried out either with and without irradiation by IR, thermogravimetric analysis (TGA), differential thermal analysis (DTA), XRD and surface area and pore size analysis techniques. The significant features observed in these experiments in the non-selectivity of blank polymer particles for dysprosium over other lanthanide ions and 35-180-fold enhancement in selectivity coefficients of irradiated dysprosium IIPs formed by covalent approach. In addition, the selectivity coefficients obtainable by γ-irradiated were compared with unirradiated dysprosium IIP particles and separation factors obtained by liquid-liquid extraction separation using di(2-ethyl hexyl) phosphoric acid as extractant.     

Synthesis,X-ray crystal structure and photophysical properties of tris(dibenzoylmethanido)(1,10-phenanthroline)samarium(III)

Herein we report for the first time the complete characterization and photophysical properties of tris(dibenzoylmethanido)(1,10-phenanthroline)samarium(III) (Sm(DBM)₃phen) in the absence of a polymer matrix. The solid state structure of Sm(DBM)₃phen has been determined by single-crystal X-ray crystallography and shows the geometry of the local coordination environment around the samarium(III) ion to be a slightly distorted square antiprism. The absolute quantum yield and luminescence lifetime were measured as 0.86 ± 0.40% and 41 ± 2 μs, respectively.     

Ion imprinted polymer based ion-selective electrode for the trace determination of dysprosium(III) ions

Ion-selective electrode (ISE) was designed by dispersing the dysprosium(III) IIP particles in 2-nitrophenyloctyl ether plasticizer and then embedded in polyvinyl chloride matrix. The ISE shows a Nernstian response for dysprosium(III) over a wide concentration range (8.0 × 10⁻⁶ to 1.0 × 10⁻¹ M) with a slope of 21.7 mV per decade. The limit of detection was 2 × 10⁻⁶ M. This sensor has a very fast response time (∼10 s) and offers high selectivity compared to conventional chemical sensors towards dysprosium(III) with respect to several alkali, alkaline earth and transition metal ions as the selectivity is 10-100-fold better. The sensor was used for determination of dysprosium(III) ions by potentiometric (EDTA) titration and has been successfully demonstrated for the determination of fluoride in mouth wash solution.     

A nanostructured ion-imprinted polymer for the selective extraction and preconcentration of ultra-trace quantities of nickel ions

We describe a nanostructured ion-imprinted polymer (IIP) for the selective preconcentration of Ni(II) ions. It was obtained by bulk polymerization from 2-vinylpyridine (the functional monomer), ethylene glycol dimethacrylate (the cross-linker), 2,2′-azobisisobutyronitrile (the initiator), alizarin red S (the nickel-binding ligand), and nickel (the template ion) in acetonitrile solution. The IIP particles were characterized by elemental analysis, X-ray diffraction, Fourier transform IR spectroscopy, thermogravimetric and differential thermal analysis, and by scanning electron microscopy. Imprinted Ni(II) ions were removed from the polymeric structure using 5 % HCl as the eluting solvent. The material is capable of selectively binding Ni(II) from solutions at pH values between (pH 8.0 being best). Both the sorption and desorption process occur within 5 min. The maximum sorbent capacity of the ion imprinted polymer is 73 mg g^?1. Following desorption, Ni(II) was determined by FAAS, with relative standard deviation and limit of detection of 3.4 % and 0.15 ng mL^?1, respectively. The method was applied to the determination of nickel in certified reference materials (soil and polymetallic gold ore), fish, vegetables, river sediments, and river water.

A novel multi-element coprecipitation technique for separation and enrichment of metal ions in environmental samples

A multi-element preconcentration-separation technique for heavy metal ions in environmental samples has been established. The procedure is based on coprecipitation of gold(III), bismuth(III), cobalt(II), chromium(III), iron(III), manganese(II), nickel(II), lead(II), thorium(IV) and uranium(VI) ions by the aid of Cu(II)-9-phenyl-3-fluorone precipitate. The Cu(II)-9-phenyl-3-fluorone precipitate was dissolved by the addition 1.0 mL of concentrated HNO₃ and then the solution was completed to 5 mL with distilled water. Iron, lead, cobalt, chromium, manganese and nickel levels in the final solution were determined by flame atomic absorption spectrometer, while gold, bismuth, uranium and thorium were determined by inductively coupled plasma mass spectrometer. The optimal conditions are pH 7, amounts of 9-phenyl-3-fluorone: 5 mg and amounts of Cu(II): 1 mg. The effects of concomitant ions as matrix were also examined. The preconcentration factor was 30. Gold(III), bismuth(III), chromium(III), iron(III), lead(II) and thorium(IV) were quantitatively recovered from the real samples. The detection limits for the analyte elements based on 3 sigma (n = 15) were in the range of 0.05-12.9 μg L⁻¹. The validation of the presented procedure was checked by the analysis of two certified reference materials (Montana I Soil (NIST-SRM 2710) and Lake Sediment (IAEA-SL-1)). The procedure was successfully applied to some environmental samples including water and sediments.     

Silica gel modified with 1-(2-aminoethyl)-3-phenylurea for selective solid-phase extraction and preconcentration of Sc(III) from environmental samples

A new method that utilizes 1-(2-aminoethyl)-3-phenylurea-modified silica gel as a solid-phase extractant has been developed for preconcentration of trace Sc(III) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions for effective adsorption of trace level of Sc(III) were optimized using batch and column procedures in detail. The optimum pH value for the separation of Sc(III) on the new sorbent was 4 and complete elution of Sc(III) from the sorbent surface was carried out using 1.0 mL of 0.1 mol L⁻¹ HCl. Common coexisting ions did not interfere with the separation and determination of the analyte. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 32.5 mg g⁻¹ while the time of 95% adsorption was less than 2 min. The detection limit of present method was found to be 0.091 μg g⁻¹, and the relative standard deviation (RSD) was lower than 3.0% (n = 8). The method was successfully applied for the preconcentration of trace Sc(III) in the environmental samples with satisfactory results.     

A stoichiometric imprinted chelating resin for selective recognition of copper(II) ions in aqueous media

This work reports the preparation of a new copper(II) ion-imprinted polymer (IIP) material, using 5,6;14,15-dibenzo-1,4-dioxa-8,12-diazacyclopentadecane-5,14-diene (DBDA15C4) and 2-vinylpyridine (VP) as a non-vinylated chelating agent and a functional vinyl monomer, respectively. The Cu²⁺ ion can form stable complexes with DBDA15C4 and VP. The stoichiometries of Cu²⁺-DBDA15C4 and ternary Cu²⁺-DBDA15C4-VP complexes were elucidated using conductometric and spectrophotometric methods, and found to be Cu²⁺(DBDA15C4), Cu²⁺(DBDA15C4)₂ and Cu²⁺(DBDA15C4)(VP)₂. The results obtained from solution studies were also supported by ab initio theoretical calculations. The resulting ternary complex Cu²⁺(DBDA15C4)(VP)₂ was copolymerized with ethyleneglycoldimethacrylate, as a cross-linking monomer, via bulk polymerization method. The imprinted copper ion was removed from the polymeric matrix by 0.1 M HNO₃. The Cu²⁺-imprinted polymer particles were characterized by IR spectroscopy and elemental analysis. Optimum pH range for rebinding of Cu²⁺ on the IIP and equilibrium binding time were 7.0-7.5 and 45 min, respectively. Sorbent capacity and enrichment factor for Cu²⁺ were obtained as 75.3 ± 1.9 μmol g⁻¹ and 100, respectively. In selectivity study, it was found that imprinting results in increased affinity of the material toward Cu²⁺ ion over other competitor metal ions with the same charge and close ionic radius. The prepared IIPs were repeatedly used and regenerated for five times without a significant decrease in polymer binding affinities.     

Selective and sensitive determination of silver ions at trace levels based on ultrasonic‐assisted dispersive solid‐phase extraction using ion‐imprinted polymer nanoparticles

We describe ultrasonic‐assisted dispersive solid‐phase extraction based on ion‐imprinted polymer (UA‐DSPE‐IIP) nanoparticles for the selective extraction of silver ions. Ultrasound is a good and robust method to facilitate the extraction of target ions in the sorption step and elution of the target ions in the desorption step. The IIP nanoparticles used in the UA‐DSPE‐IIP were prepared by precipitation polymerization. To prepare the IIP nanoparticles, 2‐vinylpyridine, ethylene glycol dimethacrylate, 2,2′‐azobisisobutyronitrile, 2‐picolinic acid, silver and chloroform–methanol (50:50) solution were used as functional monomer, cross‐linker, initiator, silver‐binding ligand, template ion and porogen, respectively. The IIP nanoparticles were characterized using Fourier transformed infrared spectroscopy, thermogravimetric and differential thermal analysis, X‐ray diffraction and scanning electron microscopy. A Box–Behnken design was used for optimization of sorption and desorption steps in UA‐DSPE‐IIP. In the sorption step: pH of solution, IIP amount (mg), sonication time for sorption (min); in the desorption step: concentration of eluent (mol l⁻¹), volume of eluent (ml), sonication time (min) for desorption were investigated and optimized by Box–Behnken design. The optimum conditions for the method were: pH of solution, 7; sonication time for sorption, 7 min; IIP amount, 17 mg; type and concentration of eluent, HCl 1.5 mol l⁻¹; volume of eluent, 2 ml; sonication time for desorption, 140 s. Under the optimized conditions the limit of detection and relative standard deviation for the detection of silver ions using UA‐DSPE‐IIP were found to be 0.09 μg l⁻¹ and <3%, respectively.     

ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution

A new method that utilizes p-dimethylaminobenzaldehyde-modified nanometer SiO₂ (SiO₂-p-DMABD) as a solid phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The preconcentration conditions of analytes were investigated, including the pH value, the shaking time, the mass of sorbent, the sample flow rate and volume, the elution condition and the interfering ions. The adsorption capacity of nanometer SiO₂-p-DMABD was found to be (mg g^− 1) Cr(III): 6.2, Cu(II): 18.6, Fe(III): 4.7 and Pb(II): 6.0 at pH 4. The adsorbed metals were quantitatively eluted with 4 mL of 1.0 mol L^− 1 HCl. According to the definition of IUPAC, the detection limits (3σ) of this method for Cr(III), Cu(II), Fe(III) and Pb(II) were 0.79, 1.27, 0.40 and 1.79 ng mL^− 1, respectively. The proposed method achieved satisfied results when it was applied to the determination of trace Cr(III), Cu(II), Fe(III) and Pb(II) in biological and water samples.