A novel, disposable, screen-printed amperometric biosensor for ketone 3-β-hydroxybutyrate fabricated using a 3-β-hydroxybutyrate dehydrogenase–mesoporous silica conjugate

A disposable amperometric biosensor for ketone 3-β-hydroxybutyrate (3HB) has been developed successfully. The sensor is based on a screen-printed carbon electrode containing Meldola’s Blue (MB) and sensing components containing nicotinamide adenine dinucleotide (NAD⁺) and 3-β-hydroxybutyrate dehydrogenase (3HBDH) immobilized in mesoporous silica (FSM8.0) using an aqueous photo-cross-linkable polymer matrix of polyvinyl alcohol (O-391), and it requires only a small sample volume of 10 μL for the measurement. The behavior of a resulting biosensor, i.e., 3HBDH–FSM8.0/NAD⁺/MB-SPCE, was examined in terms of NAD⁺ concentration for construction, pH, applied potential, operational range, selectivity, and storage stability. The sensor showed an optimum response at a pH of 7.6 and at an applied potential of ?50 mV. The determination range and the response time for 3HB were from 30 μM to 8 mM and approximately 30 s, respectively. In addition, the sensor was quite stable and maintained >90 % of its initial response after being stored for over 6 months. This result implies that our method provides a novel biosensor for ketone 3-β-hydroxybutyrate which is easy-to-use, cost-effective, and has good reproducibility, which are vital for commercial purposes.

In-line determination of metabolites and milk components with electrochemical biosensors

Electrochemical biosensors for lactate, pyruvate and β-hydroxybutyrate based on oxygen, hydrogen peroxide, and NADH sensors coupled with oxidase and dehydrogenase enzymes were developed and used in conjunction with an artificial pancreas in experiments with extracorporeal circulation. Such procedures allow the fate of these species involved in glucose metabolism to be clarified during insulin treatment of diabetic patients. Studies with a glucose oxidase electrode for in-line determination of glucose produced by hydrolysis of cellobiose in a bioreactor are reported; for the determination of glucose in the presence of high concentrations of cellobiose, the purity of glucose oxidase is important in obtaining linear calibration plots. Impurities like amylase, maltase, invertase, and galactose oxidase, which are usually present in commercial preparations of glucose oxidase, must be absent. Another application is the amperometric determination of lactose, lactate and glucose in milk samples by using a hydrogen peroxide sensor coupled with β-galactosidase, lactate oxidase and glucose oxidase. The procedures outlined are simple and the short response times enable milk to be monitored during processing.     

纳米增强型毛细管酶柱用于葡萄糖液滴生物传感器的研究

葡萄糖的检测在临床医学以及食品工业等领域中十分重要.以往的检测方法主要包括化学发光法_{[1]、吸光光度法[2]、电化学法[3]和荧光法[4]等.固定化酶柱的制作是发展葡萄糖传感器的关键技术之一.传统的固定化方法主要是将具有生物活性的酶通过物理吸附、共价键合和交联的方法固定于载体基质上或包埋于有机聚合物的基质中.近期研究[5,6]表明,采用溶胶凝胶(Sol-gel)法将蛋白质和酶等生物活性物质包埋于无机陶瓷或玻璃材料内,保持生物组分的活性,且SiO2作为基质材料具有较好的坚固性、抗磨性、化学惰性以及高的光稳定性和透过性,但目前该法多用于电化学型生物传感器[7,8].本文利用纳米颗粒的比表面积大和吸附能力强等特点,将酶吸附在SiO2纳米颗粒表面,用易成膜的聚乙烯醇缩丁醛(PVB)作辅助基质在毛细管上固定酶,并采用分立式酶柱,克服了以往混合型酶柱普遍存在的酶促效率不高和使用寿命较短的局限性.所制得的酶柱具有表面反应活性高、表面活性中心多和催化效率高等特点.结合自行设计的液滴光化学传感装置[9,10],建立了一种高效、快速、微量的葡萄糖实时检测方法.}     

Chemiluminometric flow-injection method for determination of free l-malate in wine with co-immobilized malate dehydrogenase/NADH oxidase

A flow-injection system with a co-immobilized malate dehydrogenase/reduced nicotineamide adenine dinucleotide (NADH) oxidase reactor and a chemiluminometer is described for the determination of free l-malate in wine. Malate dehydrogenase and NADH oxidase were co-immobilized on poly(vinyl alcohol) beads and packed into a stainless-steel column (5 cm x 4 mm i.d.). The hydrogen peroxide produced was detected chemiluminometrically via a luminol-hexacyanoferrate(III) reaction. The calibration graph was linear from 3 x 10(-7) M to 2.5 x 10(-4) M (the linear correlation coefficient was 0.9998); the detection limit (signal-to-noise ratio, 3) was 8 x 10(-8) M. The sample throughput was 30 h(-1) without carryover. The ractor was renewed every 2 weeks.     

Amperometric biosensor for rapid measurement of 3-hydroxybutyrate in undiluted whole blood and plasma

A simple, rapid (< 30 s) electrochemical method for the determination of 3-hydroxybutyrate in whole blood or plasma is described, which uses NAD⁺-dependent d-3-hydroxybutyrate dehydrogenase immobilized at novel platinized carbon electrodes. The steady-state oxidation current produced by enzymatically generated NADH is measured at + 150 mV vs. Ag/AgCl. Enzyme electrodes produced by direct adsorption were stable for at least 3 months. Undiluted whole blood measurement with the sensor was compared with routine spectrophotometric analysis of plasma and perchloric acid extracts of whole blood.     

Enzyme electrodes with substrate and co-enzyme amplification

The enzyme couples horseradish peroxidase/glucose dehydrogenase, glucose oxidase/glucose dehydrogenase, and cytochrome b₂/lactate dehydrogenase are applied in enzyme electrodes. Based on amplification by the recyclization reactions catalyzed by these two-enzyme systems, NADH, NAD⁺, glucose, lactate and pyruvate, are determined with 8–40-fold increased sensitivity compared to the unamplified reactions. Detection limits are 1.0 × 10^?6 M NADH, 1.2 × 10^?6 M NAD⁺, 8 × 10^?7 M glucose, and 3 × 10^?7 M lactate or pyruvate.     

Simultaneous determination of choline and acetylcholine based on a trienzyme chemiluminometric biosensor in a single line flow injection system.

A detector for the simultaneous determination of choline (Ch) and acetylcholine (ACh) based on a sensitive trienzyme chemiluminometric biosensor in a single line flow injection (FI) system is described. Immobilized choline oxidase (ChOx), immobilized peroxidase (POx), immobilized acetylcholinesterase, and coimmobilized ChOx/POx were packed, in turn, in a transparent ETFE tube (1 mm i.d., 75 cm) and the tube was placed in front of a photomultipier tube as a flow cell. Two-peak response was obtained by one injection of the sample solution. The first and second peaks were dependent on the concentrations of Ch and ACh, respectively. The influence of some experimental parameters such as flow rate, amounts of immobilized enzymes on the behavior of the sensor was studied in order to optimize the sensitivity, sample throughput and resolution. Calibration curves were linear at 1 - 1000 nM for Ch and 3 - 3000 nM for ACh. The sample throughput was 25/h without carryover. The FI system was applied to the simultaneous determination of Ch and ACh in rabbit brain tissue homogenates.     

Logic gates and elementary computing by enzymes

Different selected enzymes, glucose oxidase (GOx), catalase (Cat), glucose dehydrogenase (GDH), horseradish peroxidase (HRP), and formaldehyde dehydrogenase (FDH), are used alone or coupled to construct eight different logic gates. The added substrates for the respective enzymes, glucose and H(2)O(2), act as the gate inputs, while the biocatalytically generated gluconic acid or NADH are the output signals that follow the operation of the gates. Different enzyme-based gates are XOR, INHIBIT A, INHIBIT B, AND, OR, NOR, Identity and Inverter gates. By combining the AND and XOR or the XOR and INHIBIT A gates, the half-adder and half-subtractor are constructed, respectively, opening the way to elementary computing by the use of enzymes.     

Amperometric assay for the ketone body 3-hydroxybutyrate

A stable dry-strip electrochemical sensor for the direct measurement of 3-hydroxybutyrate in blood is described. The sensor utilizes the electrocatalytic oxidation of enzymically generated NADH by the redox mediator 4-methyl-o-quinone. The enzyme 3-hydroxybutyrate dehydrogenase, cofactor NAD⁺ and 4-methyl-o-quinone were incorporated into single-use disposable strip electrodes.     

Diffusion coefficient measurements in microfluidic devices

A glassy carbon electrode (GCE) modified with Pd/IrO(2) provides excellent electrocatalytic oxidation of hydrogen peroxide. Glucose oxidase (GOD) and xanthine oxidase (XOD) were co-immobilized on the modified electrode with a thin film Nafion coated on the enzyme layer to form a glucose (Glu)/hypoxanthine (Hx) sensor, without interference from electroactive species such as ascorbic acid (AA) and uric acid (UA). Its response was evaluated with respect to the enzyme amount on the electrode, pH and temperature of the electrolyte. The prepared bienzymic biosensor, used as the detector of HPLC gave a detection limit of 1.0x10(-6) mol l(-1) Glu and 2.0x10(-7) mol l(-1) Hx (Hx) with a linear concentration range of 5.0x10(-6)-2.5x10(-3) mol l(-1) and 1.0x10(-6)-5.0x10(-4) mol l(-1), respectively. Coupled with microdialysis, it was used to monitor the concentrations of Glu and Hx in rat brain.     

On-line biosensors for simultaneous determination of glucose, choline, and glutamate integrated with a microseparation system

An effective microseparation system integrated with ring-disc electrodes and two microfluidic devices was fabricated for in vivo determination using a microdialysis pump. The major interference of ascorbic acid (AA) was excluded by direct oxidation with ascorbate oxidase. Glucose, glutamate, and choline were successfully determined simultaneously through the biosensors modified with a bilayer of osmium-poly(4-vinylpyridine)gel-horseradish peroxidase (Os-gel-HRP)/glucose oxidase (GOD), glutamate oxidase (GlutaOD) or choline oxidase (ChOD). To stabilize the biosensors, 0.2% polyethylenimine (PEI) was mixed with the oxidases. The cathodic currents of glucose, glutamate, and choline biosensors started to increase after the standard solutions were injected into the microseparation system. The on-line biosensors show a wide calibration range (10(-7)-10(-5) mol/L) with a detection limit of 10(-8) mol/L at the working potential of -50 mV. The variations of glucose, glutamate, and choline were determined simultaneously in a free moving rat when we perfused the medial frontal cortex with 100 micro mol/L N-methyl-D-aspartate (NMDA) solution, which is the agonist of the NMDA receptor.     

Chemiluminometric method for the determination of glycerol in wine by flow-injection analysis with co-immobilized glycerol dehydrogenase/NADH oxidase

A flow-injection method for the determination of glycerol in wine is described. Glycerol dehydrogenase and NADH oxidase were co-immobilized on poly (vinyl alcohol) beads and incorporated in a flow-injection system. The hydrogen peroxide produced was detected chemiluminometrically via a luminol-hexacyanoferrate (III) reaction. Wine was diluted 1000-fold with water and sample solution (50 microl) was injected into the carrier stream. The calibration graph was linear in the range 3 x 10(-7)-3 x 10(-4) M; the detection limit was 7 x 10(-8) M and the sample throughout was 30 h(-1) without carryover.     

A Chemiluminescence Optical Fiber Glucose Biosensor Based on Co-immobilizing Glucose Oxidase and Horseradish Peroxidase in a Sol-gel Film

IntroductionIn recent years chemiluminescence (CL)biosensor prepared by immobilization of a sensitivereagent such as peroxidase or oxidase onto a solidmatrix has attracted much attention due to the highsensitivity of the chemiluminescent reaction of thesensitive reagent even with a simple instrument.Generally,CL biosensors can be divided into twocategories.One consists of hydrogen peroxide sen-sors prepared by immobilizing a kind of peroxidaseonto a suitable solid support[1,2 ] ,and the immo…     

A chemiluminometric method for NADPH and NADH using a two-enzyme bioreactor and its application to the determination of magnesium in serum

Chemiluminometric methods are described for the automated flow injection analysis of NADPH and NADH using an immobilized enzyme column reactor and serum magnesium. This application is for the clinical analysis of NADPH and NADH. The reactor for NADPH and NADH contains immobilized L-glutamate dehydrogenase and L-glutamate oxidase, and that for serum magnesium immobilized hexokinase, glucose-6-phosphate dehydrogenase, L-glutamate dehydrogenase and L-glutamate oxidase. When the sample is introduced into the four-enzyme bioreactor, hydrogen peroxide is produced in proportion to the concentration of serum magnesium by the successive reactions. A co-immobilized hexokinase/glucose-6-phosphate dehydrogenase/glutamate dehydrogenase column reactor gave better efficiency compared with an enzyme column which was prepared by packing co-immobilized hexokinase/glucose-6-phosphate dehydrogenase and immobilized glutamate dehydrogenase to make two layers. Magnesium in serum was determined with 1 microL of the sample without carry-over and for an assay time of approximately 15 s. The present method is sensitive (detection limit 0.1 nmol) because Mg2+ is recycled in a column, and gives perfect linearity of the data up to 3.0 mmol/L with satisfactory precision, reproducibility, and accurate reaction recoveries.     

Entrapment of both glucose oxidase and peroxidase in regenerated silk fibroin membrane

Two enzmyes, glucose oxidase and peroxidase, were for the first time simultaneously immobilized in regenerated silk fibroin membrane. The structure and morphology of the regenerated silk fibroin membrane containing both glucose oxidase and peroxidase were investigated with IR spectra and SEM. The bienzymes do not change the structures of the regenerated silk fibroin in the membrane, which has an islands-sea structure. For the first time, an amperometric methylene green mediating sensor for glucose based on co-immobilization of both glucose oxidase and peroxidase in regenerated silk fibroin was constructed. Cyclic voltammetry and amperometry were used to test the suitability of methylene green shuttling electrons between peroxidase and the glassy carbon electrode. The bienzyme-based system offers fast response and high sensitivity of the sensor to glucose. The effects of pH, temperature, and the concentration of the mediator on the response current were evaluated, and the dependence of the Michaelis-Menten constant K(m)(app) on the concentration of the mediator was investigated.     

An enzymatic assay method for D(-)-3-hydroxybutyrate and acetoacetate involving acetoacetyl coenzyme A synthetase from Zoogloea ramigera

An enzyme assay method for D(-)-3-hydroxybutyrate and acetoacetate involving acetoacetyl coenzyme A (CoA) synthetase was developed. To determine the concentration of D-3-hydroxybutyrate, it was oxidized with D-3-hydroxybutyrate dehydrogenase in the presence of nicotinamide adenine dinucleotide (NAD+) to acetoacetate, which was then converted to acetyl CoA via acetoacetyl CoA through the combined actions of acetoacetyl CoA synthetase and 3-ketothiolase in the presence of adenosine triphosphate (ATP) and CoA. To determine the concentration of acetoacetate, acetoacetyl CoA generated from acetoacetate with acetoacetyl CoA synthetase was reduced to 3-hydroxybutyryl CoA with 3-hydroxyacyl CoA dehydrogenase in the presence of NADH. The amount of D-3-hydroxybutyrate or acetoacetate was estimated from the increase or decrease in the absorbance at 340 nm, respectively. The present assay method seemed to be accurate and quick. Furthermore, as to the assaying of D-3-hydroxybutyrate, the omission of hydrazine, which is included for the standard method, may be preferable for routine assaying.     

高灵敏检测葡萄糖的新型荧光纳米传感器

构建了一种用于高灵敏检测葡萄糖的新型荧光纳米传感器.在辣根过氧化物酶(HRP)的催化下,H2O2氧化3,3′,5,5′-四甲基联苯胺(TMB),生成具有强吸光性质的TMB多聚体,导致1-氧-1H-非那烯-2,3-二腈(1-Oxo-1H-phenalene-2,3-dicarbonitrile, OPD)分子的荧光发生淬灭,基于此实现H2O2的定量检测,线性范围分别为0.05~0.80 μmol/L和1~10 μmol/L,检出限(3σ)为0.02 μmol/L.由于葡萄糖氧化酶(Gox)可催化葡萄糖分解产生H2O2,基于此可以实现葡萄糖分子的定量检测,线性范围分别为0.1~3.0 μmol/L和4.0~30 μmol/L, 检出限(3σ)为0.02 μmol/L.将本方法用于实际血清样品中葡萄糖的定量检测,结果与临床检测结果相符.     

Simultaneous kinetic determination of 3-hydroxybutyrate and 3-hydroxyvalerate in biopolymer degradation processes

A new kinetic method is proposed for the simultaneous determination of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) based on the different rate of the 3-hydroxybutyrate dehydrogenase-catalysed reactions of these compounds with coenzyme NAD⁺. A flow injection system with two reactors of immobilised 3-hydroxybutyrate dehydrogenase and dual detection is used. The concentrations of NADH produced after two different reaction times are measured by fluorometry or spectrophotometry and multivariate linear calibration is applied for quantification. Concentrations of 3HB and 3HV between 1 × 10⁻⁶ and 1 × 10⁻⁴ M can be determined at an average sampling frequency of 20 h⁻¹. In contrast to usual methods, the proposed here makes possible the discrimination of 3HB and 3HV without previous separation so that usual extraction with chlorinated solvents and/or chromatographic separation is not required. The method is of interest in a wide variety of fields concerning PHAs, as it can provide information on the degradation rate and mechanism, composition and structure of these polymers. Its applicability has been proved through the determination of 3HB and 3HV in the digests of some chemically degraded commercial PHAs.     

Entrapment of both glucose oxidase and peroxidase in regenerated silk fibroin membrane

Two enzmyes, glucose oxidase and peroxidase, were for the first time simultaneously immobilized in regenerated silk fibroin membrane. The structure and morphology of the regenerated silk fibroin membrane containing both glucose oxidase and peroxidase were investigated with IR spectra and SEM. The bienzymes do not change the structures of the regenerated silk fibroin in the membrane, which has an islands-sea structure. For the first time, an amperometric methylene green mediating sensor for glucose based on co-immobilization of both glucose oxidase and peroxidase in regenerated silk fibroin was constructed. Cyclic voltammetry and amperometry were used to test the suitability of methylene green shuttling electrons between peroxidase and the glassy carbon electrode. The bienzyme-based system offers fast response and high sensitivity of the sensor to glucose. The effects of pH, temperature, and the concentration of the mediator on the response current were evaluated, and the dependence of the Michaelis-Menten constant K_m^app on the concentration of the mediator was investigated.     

Electrochemical Behaviour of Microwave‐assisted Oxidized MWCNTs Based Disposable Electrodes: Proposal of a NADH Electrochemical Sensor

The effect of the oxidation degree of multiwalled carbon nanotubes (MWCNTs) for the detection of NADH was evaluated in this paper. MWCNTs were oxidized by microwave‐assisted sulfonitic treatment at different times (5, 10, 15, and 30 min) and deposited onto a graphite screen printed electrodes. Oxidized MWCNTs were characterized and the electrochemical performance evaluated. The best sensor in terms of sensitivity and stability was obtained after 15 minutes of oxidation (SPE/CNT15). A significant reduction of the NADH oxidation potential was recorded for oxidized MWCNTs compared with unmodified MWCNTs (0.270 V and 0.500 V, respectively vs. Ag/AgCl pseudo reference electrode), increasing the selectivity of the system. Chronoamperometric calibration curves carried out applying a potential of 0.3 V for 1 min were linear in the 4–35 μM range of NADH. A limit of detection of 1 μM was achieved with negligible surface fouling (three consecutive calibration curves, 30 total measurements: slope decrease 5.9 %). Inter electrode reproducibility (n=13) was good resulting in RSD of 15.2 % and 5.0 % for the peak intensity and the oxidation potential, respectively. Quantification of glucose in white wine samples was carried out to demonstrate the ability of the NADH sensor to work in real samples. A good correlation with a spectrophotometric kit for the glucose quantification was achieved.