Preparation of Ag deposited TiO2 (Ag/TiO2) composites and investigation on visible-light photocatalytic degradation activity in magnetic field

In this study, Ag deposited TiO₂ (Ag/TiO₂) composites were prepared by three different methods (Ultraviolet Irradiation Deposition (UID), Vitamin C Reduction (VCR) and Sodium Borohydride Reduction (SBR)) for the visible-light photocatalytic degradation of organic dyes in magnetic field. And then the prepared Ag deposited TiO₂ (Ag/TiO₂) composites were characterized physically by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The visible-light photocatalytic activities of these three kinds of Ag deposited TiO₂ (Ag/TiO₂) composites were examined and compared through the degradation of several organic dyes under visible-light irradiation in magnetic field. In addition, some influence factors such as visible-light irradiation time, organic dye concentration, revolution speed, magnetic field intensity and organic dye kind on the visible-light photocatalytic activity of Ag deposited TiO₂ (Ag/TiO₂) composite were reviewed. The research results showed that the presence of magnetic field significantly enhanced the visible-light photocatalytic activity of Ag deposited TiO₂ (Ag/TiO₂) composites and then contributed to the degradation of organic dyes.     

Characterization of Titanium Dioxide Doped with Nitrogen and Sulfur and its Photocatalytic Appraisal for Degradation of Phenol and Methylene Blue

The degradation of organic dyes in the presence of modified TiO₂ is still under intensive investigation. We report here an evaluation of the photocatalytic activity of nitrogen‐ (N‐) and sulfur‐ (S‐) doped TiO₂ for the degradation of phenol and methylene blue (MB). N‐doped TiO₂ (N–TiO₂), S‐doped TiO₂ (S–TiO₂), and N–S‐doped TiO₂ (N–S–TiO₂) were prepared using the sol–gel method. The photocatalytic activity was evaluated in a batch reactor using phenol and MB as models of pollutants. In addition, this investigation was performed using a household lamp as the visible light source. Properties of the synthesized materials in terms of Brunauer–Emmett–Teller (BET) surface analysis, field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and photocatalytic ability were examined. Our study shows that N–S–TiO₂ exhibits better photocatalytic degradation ability for all the considered dyes compared to the other doped TiO₂ materials. In conclusion, we have successfully prepared and evaluated the photocatalytic activity of N‐ and S‐doped TiO₂ for the degradation of phenol and MB using an ordinary household lamp.     

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Azo dyes degradation using TiO2-Pt/graphene oxide and TiO2-Pt/reduced graphene oxide photocatalysts under UV and natural sunlight irradiation

The photocatalytic degradation of azo dyes with different structures (amaranth, sunset yellow and tartrazine) using TiO₂-Pt nanoparticles (TPt), TiO₂-Pt/graphene oxide (TPt-GO) and TiO₂-Pt/reduced graphene oxide (TPt-rGO) composites were investigated in the presence of UV and natural sunlight irradiation. The composites were prepared by a combined chemical-thermal method and characterized by Transmission Electron Microscopy (TEM), X-ray powder diffraction (XRD), Infrared (FTIR) and UV–Vis spectroscopy. The modification of TiO₂-Pt with graphene oxide shifted its optical absorption edge towards the visible region and increased its photocatalytic activity under UV and natural sunlight irradiation. The efficiency of catalysts on azo dyes degradation (in similar conditions) reached high values (above 99%) under sunlight conditions, proving the remarkable photocatalytic activities of obtained composites. TPt-GO nanocomposite exhibited higher photoactivity than TPt or TPt-rGO, demonstrating degradation efficiencies of 99.56% for amaranth, 99.15% for sunset yellow and 96.23% for tartrazine. The dye photodegradation process follows a pseudo-first-order kinetic with respect to the Langmuir-Hinshelwood reaction mechanism. A direct dependence between azo dyes degradation rate and chemical structure of dyes has been observed.     

TiO2/BiVO4, a Heterojuncted Microfiber with Enhanced Photocatalytic Performance for Methylene Blue under Visible Light Irradiation

Novel TiO₂/BiVO₄ microfiber heterojunctions were constructed using cotton as biomorphic templates. The as-synthesized samples were characterized by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectra and photocatalytic experiment. The morphology of the as-synthesized TiO₂/BiVO₄ composites was consisted of a large quantity of microfiber structures with diameter from 2.5 μm to 5 μm, and the surface of samples became more coarse and compact with the increase of weight ratio of TiO₂. The TiO₂/BiVO₄ samples with proper content (10.00wt%) showed the highest pho-tocatalytic degradation activity for methylene blue (MB) degradation among all the samples under visible light, and 88.58%MB could be degraded within 150 min. The enhancement of photocatalytic activity was mainly attributed to the formation of n-n heterojunction at the contact interface of TiO₂ and BiVO₄, which not only narrowed the band gap of BiVO₄ for extending the absorption range of visible light, but also promoted the transfer of charge carriers across interface. A possible photodegradation mechanism of MB in the presence of TiO₂/BiVO₄ microfibrous photocatalyst was proposed.     

Dye degradation studies of Mo‐doped TiO2 thin films developed by reactive sputtering

TiO₂ thin films with various Mo concentrations have been deposited on glass and n‐type silicon (100) substrates by this radio‐frequency (RF) reactive magnetron sputtering at 400°C substrate temperature. The crystal structure, surface morphology, composition, and elemental oxidation states of the films have been analyzed by using X‐ray diffraction, field emission scanning electron microscopy, atomic force microscopy, and X‐ray photoelectron spectroscopy, respectively. Ultraviolet‐visible spectroscopy has been used to investigate the degradation, transmittance, and absorption properties of doped and undoped TiO₂ films. The photocatalytic degradation activity of the films was evaluated by using methylene blue under a light intensity of 100 mW cm⁻². The X‐ray diffraction patterns show the presence of anatase phase of TiO₂ in the developed films. X‐ray photoelectron spectroscopy studies have confirmed that Mo is present only as Mo⁶⁺ ions in all films. The Mo/TiO₂ band gap decreases from ~3.3 to 3.1 eV with increasing Mo dopant concentrations. Dye degradation of ~60% is observed in Mo/TiO₂ samples, which is much higher than that of pure TiO₂.     

Improved Photodegradation of Organic Contaminants Using Nano‐TiO2 and TiO2–SiO2 Deposited on Portland Cement Concrete Blocks

The photocatalytic activity of TiO₂ nanoparticles (nano‐TiO₂) and its hybrid with SiO₂ (nano‐TiO₂–SiO₂) for degradation of some organic dyes on cementitious materials was studied in this work. Nanohybrid photocatalysts were prepared using an inorganic sol–gel precursor and then characterized using XRD, SEM and UV–Vis. The grain sizes were estimated by Scherrer's equation to be around 10 nm. Then, a thin layer was applied to Portland cement concrete (PCC) blocks by dipping them into nano‐TiO₂ and nano‐TiO₂–SiO₂ solution. The efficiency of coated PCC blocks for the photocatalytic decomposition of two dyes, Malachite Green oxalate (MG) and Methylene Blue (MB), was examined under UV and visible irradiation and then monitored by the chemical oxygen demand tests. The results showed that more than 80% and 92% of MG and MB were decomposed under UV–Vis irradiation using blocks coated with nano‐TiO₂–SiO₂. TiO₂/PCC and TiO₂–SiO₂/PCC blocks showed a significant ability to oxidize dyes under visible and UV lights and TiO₂–SiO₂/PCC blocks require less time for dye degradation. Based on these results, coated blocks have increased photocatalytic activity which can make them commercially accessible photocatalysts.     

Photocatalytic degradation of triazine dyes over N-doped TiO2 in solar radiation

Photocatalytic degradation of the reactive triazine dyes Reactive Yellow 84 (RY 84), Reactive Red 120 (RR 120), and Reactive Blue 160 (RB 160) on anatase phase N-doped TiO₂ in the presence of natural sunlight has been carried out in this work. The effect of experimental parameters like initial pH and concentration of dye solution and dosage of the catalyst on photocatalytic degradation have also been investigated. Adsorption of dyes on N-doped TiO₂ was studied prior to photocatalytic studies. The studies show that the adsorption of dyes on N-doped TiO₂ was high at pH 3 and follows the Langmuir adsorption isotherm. The Langmuir monolayer adsorption capacity of dyes on N-doped TiO₂ was 39.5, 86.0, and 96.3 mg g^?1 for RY 84, RR 120, and RB 160, respectively. The photocatalytic degradation of the dyes follows pseudo first-order kinetics and the rate constant values are higher for N-doped TiO₂ when compared with that of undoped TiO₂. Moreover, the degradation of RY 84 on N-doped TiO₂ in sunlight was faster than the commercial Aeroxide^® P25. However, the P25 has shown higher photocatalytic activity for the other two dyes, RR 120 and RB 160. The COD of 50 mg l^?1 Reactive Yellow-84, RR 120 and RB 160 was reduced by 65.1, 73.1, and 69.6 %, respectively, upon irradiation of sunlight for 3 h in the presence of N-doped TiO₂. The photocatalyst shows low activity for the degradation of RY 84 dye, when its concentration was above 50 mg l^?1, due to the strong absorption of photons in the wavelength range 200–400 nm by the dye solution. LC–MS analysis shows the presence of some triazine compounds and formimidamide derivatives in the dye solutions after 3 h solar light irradiation in the presence of N-doped TiO₂.     

Optimal TiO2–Graphene Oxide Nanocomposite for Photocatalytic Activity under Sunlight Condition: Synthesis,Characterization, and Kinetics

TiO₂–graphene oxide nanocomposites have been fabricated by the sol–gel technique for degradation of a typical cationic dye solution. The prepared photocatalysts were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric‐differential analyses, Brunauer–Emmett–Teller surface area measurement, and scanning and transmission electron microscopy. In addition, the photocatalytic activities of samples were evaluated by degradation of methylene blue aqueous solution under the sunlight irradiation. The change in color of solution was evaluated by the UV–vis spectroscopy, and the maximum photocatalytic decoloration (94%) was achieved within 60 min, which exceeded that of pure anatase under the same conditions. The results show that the nanocomposite containing 9.0 wt% of graphene oxide has the superior photocatalytic performance to either single‐phase anatase or other composites containing different amounts of graphene oxide. The experimental degradation data obtained from the batch tests were analyzed by a modified kinetic model, which predicted the performance with higher regression coefficients and lower relative errors. The distribution of TiO₂ nanoparticles (<20 nm) on graphene oxide sheets is proposed to be the efficient factor in the homogeneous degradation of dye which can concomitantly improve the photocatalytic activity.     

Ternary BiOBr/TiO2/Ti3C2Tx MXene nanocomposites with heterojunction structure and improved photocatalysis performance

The rational design and construction of heterojunction structure is an effective strategy to improve the photocatalytic performance. Herein, a series of BiOBr nanosheets-immobilized TiO₂/Ti₃C₂T_x MXene hybrid materials with heterojunction structure were synthesized by a facial one-step hydrothermal method. The ternary composites show outstanding performance as photocatalysts for the degradation of rhodamine B due to the optimized synergetic effects of BiOBr, TiO₂ and Ti₃C₂T_x. The improved photocatalytic performance is remarkably attributed to the construction of a heterojunction between TiO₂ and BiOBr due to their well-matching of energy band position, which can enhance the absorption for visible light and promote the transfer of photo-generated charge carriers. Moreover, Ti₃C₂T_x acts as an electron trap to further accelerate the separation of photo-generated electrons and holes.     

Preparation, characterization and photocatalytic properties of InVO4 nanopowder and InVO4–TiO2 nanocomposite toward degradation of azo dyes and formaldehyde under visible light and ultrasonic irradiation

In this study, photocatalytic activity of InVO₄ and InVO₄–TiO₂ nanoparticles in the degradation of aqueous solutions of industrial textile azo dyes such as Solophenyl Red 3BL, Coperoxon Nevy Blue RL and Black Nilusun 2BC (abbreviated as SR 3BL, CNB RL and BN 2BC, respectively) and also formaldehyde (abbreviated as FAD) under visible light and ultrasonic irradiations has been compared. The effect of various parameters such as pH, temperature, irradiation time, amounts of nanophotocatalyst and nanocomposite, and ultrasonic intensity on degradation rates was investigated. Then based on the Langmuir–Hinshelwood approach, reaction rates and adsorption equilibrium constants were calculated. The nanophotocatalyst and nanocomposite were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and UV‐Vis spectroscopic methods. It was observed that InVO₄–TiO₂ nanopowder was more reactive than pure InVO₄ in the degradation of azo dyes under both conditions of visible light and ultrasonic irradiations. It was noticeable that degradation percent was more under ultrasonic irradiation rather than under visible light irradiation.     

Fabrication of S-scheme hollow TiO2@Bi2MoO6 composite for efficiently photocatalytic CO2 reduction

Herein, an S-scheme hollow TiO₂@Bi₂MoO₆ heterojunction was synthesized for photocatalytic reduction of CO₂ under simulated sunlight. Among all prepared composites, the TiO₂@Bi₂MoO₆ with 20% of TiO₂ exhibited the highest CO yield (183.97 μmol/g within 6 h), which was 4.0 and 2.4 times higher than pristine TiO₂ and Bi₂MoO₆, respectively. The improved photocatalytic activity may be due to the formation of S-scheme heterojunction to promote the separation and transfer of photogenerated charge carriers. Additionally, this hollow structure provided abundant sites in terms of CO₂ adsorption and activation. Meanwhile, the photogenerated charge transfer mechanism of the S-scheme was verified by work function calculations, Electron paramagnetic resonance (EPR) measurements as well as X-ray photoelectron spectroscopy (XPS). This research presents a novel approach to improve photocatalytic reduction of CO₂ via morphology modulation and the fabrication of S-scheme heterojunction.     

Photocatalytic properties of CuO/(001)‐TiO2 composites synthesized by the vapor–thermal method

Composites of (001)‐face‐exposed TiO₂ ((001)‐TiO₂) and CuO were synthesized in water vapor environment at 250°C with various Cu/Ti molar ratios (R_Cu/Ti). The resulting CuO/(001)‐TiO₂ composites were characterized using a variety of techniques. The synthesis under high‐temperature vapor allows close contact between CuO and (001)‐TiO₂, which results in the formation of heterojunctions, as evidenced by the shift of valence band maximum towards the forbidden band of TiO₂. An appropriate ratio of CuO can enhance the absorption of visible light and promote the separation of photogenerated carriers, which improve the photocatalytic performance. The degradation rate constant K_app increased from 5.5 × 10^?2 to 8.1 × 10^?2 min^?1 for R_Cu/Ti = 0.5. Additionally, the results showed that superoxide radicals (^?O₂^?) play a major role in the photocatalytic degradation of methylene blue.     

Solar active nano-TiO2 for mineralization of Reactive Red 120 and Trypan Blue: 1st Nano Update

Nano-TiO₂ was synthesized by sol–gel method. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) images, transmission electron microscope (TEM), BET surface area measurement and DRS analysis. The formation of anatase phase nano-TiO₂ was confirmed by XRD measurements and its crystalline size is found to be 15.2 nm. SEM images depict the crystalline nature of prepared TiO₂. The BET surface area of prepared TiO₂ is found to be 86.5 m² g^?1 which is higher than that of commercially available TiO₂–P25. The photocatalytic activity of prepared anatase phase TiO₂ has been tested for the degradation of two azo dyes: Reactive Red 120 (RR 120) and Trypan Blue (TB) using solar light. The photocatalytic activity of nano-TiO₂ is higher than TiO₂–P25 under solar light. The mineralization of dyes has been confirmed by chemical oxygen demand (COD) measurements.     

Constructing heterojunction interface of Co3O4/TiO2 for efficiently accelerating acetaminophen degradation via photocatalytic activation of sulfite

Achieving efficient degradation of organic pollutants via activation of sulfite is meaningful but challenging. Herein, we have constructed a heterogeneous catalyst system involving Co₃O₄ and TiO₂ nanoparticles to form the p-n heterojunction (Co₃O₄/TiO₂) to degrade acetaminophen (ACE) through photocatalytic activation of sulfite. Specifically, X-ray photoelectron spectroscopy analysis and theoretical calculations provide compelling evidence of electron transfer from Co₃O₄ to TiO₂ at the heterointerface. The interfacial electron redistribution of Co₃O₄/TiO₂ tunes the adsorption energy of HSO₃^?/SO₃^2? in sulfite activation process for enhanced the catalytic activity. Owing to its unique heterointerface, the degradation efficiency of ACE reached 96.78% within 10 min. The predominant active radicals were identified as ^?OH, h⁺, and SO_x^?? through radical quenching experiments and electron spin resonance capture. Besides, the possible degradation pathway was deduced by monitoring the generated intermediate products. Thereafter, the enhanced roles of well-engineered compositing interface in photocatalytic activation of sulfite for complete degradation of ACE were unveiled that it can improve light absorption ability, facilitate the generation of active species, and optimize reactive pathways. Considering that sulfite is a waste from flue gas desulfurization process, the photocatalytic activation of sulfite system will open up new avenues of beneficial use of air pollutants for the removal of pharmaceutical wastewater.     

Catalytic degradation of gaseous benzene by using TiO2/goethite immobilized on palygorskite: Preparation,characterization and mechanism

The nano-TiO₂/goethite/palygorskite catalysts were prepared by sol–gel method. The morphology and structure of the catalysts were analyzed by X-ray diffraction (XRD), UV–Vis reflection spectrometer, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and N₂ adsorption-desorption measurement. The results indicated that the self-made catalysts had excellent catalytic performance on gaseous benzene degradation. In the case of benzene concentration at 30 mg/m³, the degradation efficiency, over TiO₂/goethite/palygorskite composite with mass ratio of 10:5:5, reached 70.4% after 180 min 254 nm UV irradiation. The reaction mechanism and kinetics study showed that palygorskite/goethite/TiO₂ composites photocatalytic degradation benzene was mainly caused by oxidizing property of electron–holes and oxygen synergy effect.     

Heterostructural BiOI/TiO2 composite with highly enhanced visible light photocatalytic performance

Binary BiOI/TiO₂ hybrid material was synthesized via a sol-gel method combined with chemical etching. The as-prepared powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), photoluminescence spectra (PLS) and photocurrent response tests. Under visible light (λ > 420 nm), BiOI/TiO₂ degraded methyl orange (MO) efficiently and displayed much higher photocatalytic activity than that of pure BiOI. Moreover, BiOI/TiO₂ can effectively promote photooxidation of other organic dyes like rhodamine B (RhB), crystal violet (CV) and methylene blue (MB). In addition, the quenching effects of different scavengers proved that reactive O ₂ ^? and h⁺ played the major role in the MO degradation. The photocatalytic activity enhancement of BiOI/TiO₂ is closely related to the strong absorption in the visible region, and the efficient charge separation derived from the matching band potentials between BiOI and TiO₂, as well as the low recombination rate of the electron-hole pairs due to the heterojunction formed between BiOI and TiO₂.     

Fabrication of visible light driven nano structured Copper,Boron codoped TiO2 for photocatalytic removal of Lissamine Green B

In the present research work a potentially improved Copper (Cu) and Boron (B) codoped TiO₂ nano materials were synthesized by varying the different dopant concentrations (Copper 0.25, 0.50, 0.75, 1?wt% and Boron 0.25, 0.50, 0.75, 1?wt%) using solgel method for the photocatalytic degradation of Lissamine Green B. In order to investigate the physical, chemical and optical properties of a catalyst, which play a key role in its photocatalytic activity, as prepared samples were characterized by various instrumental techniques. The crystalline phase study performed for all the samples using X-ray powder diffraction (XRD) confirmed the formation of anatase TiO₂. Chemical composition of the prepared catalyst investigated by X-ray photo electron spectroscopy (XPS) affirmed the presence of constituent elements (Ti, O, Cu & B) on the catalyst surface. The surface microstructure studied by field emission scanning electron microscopy (FE-SEM) revealed that the TiO₂ particles having spherical shape with rough surface morphology. The average particle size and surface area of the catalyst determined by high-resolution transmission electron microscopy (HRTEM) and Brunauer-Emmett-Teller (BET) surface area analyser, revealed that the codoped catalyst shows a high percentage of small particles of size 6.8?nm and a high surface area of 135.6?m²/g, respectively. The band edge absorption shift of the samples was determined by diffuse reflectance spectroscopy analysis (DRS) and the results exhibited that among all the codoped samples Copper 0.25?wt% and Boron 1?wt% (CBT1) catalyst shows a reduced band gap energy of 2.73?eV. The characterization results supported the photocatalytic activity of the catalyst for the degradation of Lissamine Green B within 90?min at the optimum reaction parameters such as dopant concentration of Cu at 0.25?wt% & B at 1?wt%, pH?=?3, catalyst dosage 0.075?g/L and dye concentration 10?mg/L under visible light irradiation. The mechanism of enhanced photocatalytic performance of the catalyst was proposed by the results obtained from the PL spectra and main reactive species trapping measurements.     

Solvothermal preparation of copper(II) porphyrin-sensitized mesoporous TiO<Subscript>2</Subscript> composites: enhanced photocatalytic activity and stability in degradation of 4-nitrophenol

Four new copper(II) porphyrins CuPp(1, 2, 3, 4) with a different number of peripheral ester groups were synthesized and used to sensitize the mesoporous TiO₂ under solvothermal condition, and accordingly, four mesoporous CuPp(1, 2, 3, 4)/TiO₂ composites were obtained. These composites were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, BET nitrogen adsorption–desorption isotherms (BET), UV–vis diffuse reflectance spectroscopy (UV–vis-DRS), and Fourier-transform infrared spectroscopy (FT-IR). The results showed the crystal structure and morphology of mesoporous TiO₂ were not affected by the porphyrin existence on its surface. The photocatalysis properties of mesoporous TiO₂ and CuPp(1, 2, 3, 4)/TiO₂ have been evaluated by conducting the photocatalytic degradation of 4-nitrophenol (4-NP) under visible-light irradiation, and the result showed their higher photocatalytic activities and the order is: CuPp(4)/TiO₂ > CuPp(3)/TiO₂ > CuPp(2)/TiO₂ > CuPp(1)/TiO₂ ? TiO₂. The probable reasons are their large surface area and different number of peripheral groups in CuPp, which separate electron–hole pairs efficiently. The repetition test of CuPp(1, 2, 3, 4)/TiO₂ composites demonstrated that they still maintained superior photocatalytic activity over six recycles.     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.