Determination of cadmium and zinc in fertilizer samples by FAAS after solid-phase extraction with freshly precipitated manganese-diethyldithiocarbamate.

Using freshly precipitated manganese-diethyldithiocarbamate (Mn(DDTC)(2)) as a new reagent, a solid phase extraction method (SPE) has been developed for the extraction of Cd(II) and Zn(II) in aqueous fertilizer samples. A sample solution of 300 mL was taken and 0.10 g of freshly precipitated Mn(DDTC)(2) was added. After adding a phosphate buffer solution, the mixture was stirred at 10 min, filtered with a glass filter and washed with deionized water. The solid product containing Mn(DDTC)(2)-Cd(DDTC)(2)-Zn(DDTC)(2) complexes was dissolved in concentrated nitric acid and its volume was made complete up to 10 mL with deionized water. The metal contents of the solution were measured by an atomic-absorption spectrometer.     

Liquid-liquid extraction of palladium(II) from hydrobromic acid media by hexadecylpyridinium bromide.

A simple and rapid liquid-liquid extraction of palladium has been studied involving ion-pairing of bromocomplexes of palladium(II) with hexadecylpyridinium bromide (HDPB) dissolved in chloroform. The stoichiometry and distribution of (HDP)2PdBr4 between the aqueous and organic phase was investigated by spectrophotometric mole ratio method. The extraction efficiency of palladium(II) by HDPB was studied as a function of several variables: acid, salt, surfactant concentration and equilibrium time. The results showed that PdBr4(2-) extraction could be explained by assuming the formation of (HDP)2PdBr4 complexes in the aqueous solution and transfer to organic phase. The extraction was fast and the shaking time was only a few min. The average recovery of palladium(II) from an aqueous solution containing 10 microg/ml of analyte was 99% with an RSD% of 0.95. The percentage recovery of 0.2 microg/ml palladium(II) was 96%.     

Solid phase extraction of trace metals in water and leafy vegetables using a resin functionalized with potassium 2-benzoylhydrazinecarbodithioate and determination by ICP–AES

A solid phase extraction method for the determination of Cu(II), Mn(II) and Zn(II) metal ions in natural water and leafy vegetable samples by ICP-AES was developed. The method was based on the sorption of metal ions onto Amberlite XAD-16 functionalized with a new chelating ligand potassium 2-benzoylhydrazinecarbodithioate (Amberlite XAD-16-PBHCD) and elution with nitric acid. The optimum experimental conditions for the quantitative sorption of the three metal ions, namely, effect of pH, sample volume, flow rate, concentration of eluent, sorption capacity, kinetics of sorption, and the effect of diverse ions on the sorption of analytes have been investigated. All the metal ions were quantitatively retained by the functionalized resin at pH 5.0 and sorbed metals could be eluted with 2.0?M HNO₃. The detection limits were 5.6, 4.5 and 1.8?µg?L^?1 for Cu(II), Mn(II) and Zn(II), respectively. The developed method was applied for the determination of Cu(II), Mn(II) and Zn(II) in water and leafy vegetable samples.     

Comparison Studies on Several Ligands Used in Determination of Cd(II) in Rice by Flame Atomic Absorption Spectrometry after Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction

Ligands plays an important role in the extraction procedures for the determination of cadmium in rice samples by using flame atomic absorption spectrometry (FAAS). In the present study, comparative evaluation of 10 commercially available ligands for formation of Cd(II)-ligand complex and determination of cadmium in rice samples by ultrasound-assisted dispersive liquid–liquid microextraction (UADLLME) combined with FAAS was developed. Sodium diethyldithiocarbamate (DDTC) provided a high distribution coefficient as well as a good absorbance signal, therefore DDTC was used as a ligand in UADLLME. A low density and less toxic solvent, 1-heptanol, was used as the extraction solvent and ethanol was used as the disperser solvent. In addition, the experimental conditions of UADLLME were optimized in standard solution first and then applied in rice, such as the type and volume of extractant and dispersant, pH, extraction time, and temperature. Under the optimal experimental conditions, the detection limit (3σ) was 0.69 μg/L for Cd(II). The proposed method was applied for the determination of Cd(II) in three different rice samples (polished rice, brown rice, and glutinous rice), the recovery test was carried out, and the results ranged between 96.7 to 113.6%. The proposed method has the advantages of simplicity, low cost, and accurate and was successfully applied to analyze Cd(II) in rice.     

A new chelating resin for preconcentration and determination of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) by flame atomic absorption spectrometry

A new polychelatogen, AXAD-16-1,2-diphenylethanolamine, was developed by chemically modifying Amberlite XAD-16 with 1,2-diphenylethanolamine to produce an effective metal-chelating functionality for the preconcentration of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) and their determination by flame atomic absorption spectrometry. Various physiochemical parameters that influence the quantitative preconcentration and recovery of metal were optimized by both static and dynamic techniques. The resin showed superior extraction efficiency with high-metal loading capacity values of 0.73, 0.80, 0.77, 0.87, 0.74, and 0.81 mmol/g for Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II), respectively. The system also showed rapid metal-ion extraction and stripping, with complete saturation in the sorbent phase within 15 min for all the metal ions. The optimum condition for effective metal-ion extraction was found to be a neutral pH, which is a great advantage in the preconcentration of trace metal ions from natural water samples without any chemical pretreatment of the sample. The resin also demonstrated exclusive ion selectivity toward targeted metal ions by showing greater resistivity to various complexing species and more common metal ions during analyte concentration, which ultimately led to high preconcentration factors of 700 for Cu(II); 600 for Mn(II), Ni(II), and Zn(II); and 500 for Cd(II) and Pb(II), arising from a larger sample breakthrough volume. The lower limits of metal-ion detection were 7 ng/mL for Mn(II) and Ni(II); 5 ng/mL for Cu(II), Zn(II), and Cd(II), and 10 ng/mL for Pb(II). The developed resin was successful in preconcentrating metal ions from synthetic and real water samples, multivitamin-multimineral tablets, and curry leaves (Murraya koenigii) with relative standard deviations of < or = 3.0% for all analytical measurements, which demonstrated its practical utility.     

Analysis of Local Anesthetics in Biological Samples via Kinetically Calibrated Liquid-Phase Solvent Bar Micro-Extraction Combined with HPLC

In this study, a liquid-phase solvent bar micro-extraction technique was used to investigate both the extraction and back-extraction processes of the target analyte. A novel concentration curve method and a classic time curve method, used under the same experimental conditions, verified the symmetry between the extraction process (target analyte moves from sample matrix to the organic solvent-based extraction phase) and the back-extraction process (target analyte moves from organic solvent to the sample matrix), providing the basis to use the target analyte in the back-extraction process to calibrate its extraction process. A quantitative calibration can be achieved using back extraction on the target analyte from the blank sample matrix in the organic solvent. Information from the process of back extraction of the target analyte, such as the time constant a, can be directly used to calculate the initial concentration of the target analyte in the sample matrix. This new kinetic calibration method employs a liquid-phase solvent bar micro-extraction technique combined with high-performance liquid chromatography with a diode array detector (HPLC-DAD) and was successfully used to analyze three local anesthetics in biological samples; it extends the application of the kinetic calibration to HPLC-DAD and establishes a novel, simple and accurate method to determine the concentration of the free drug in biological samples and its protein-binding ratio.

     

Spectroscopic and extraction studies of new transition metal complexes with N,N ′- bis (2-aminothiophenol)-1, 4- bis (2-carboxaldehydephenoxy)butane

Metal complexes of La(III), Cu(II) and Ni(II) with a thio Schiff base derived from 1,4-bis(2-carboxaldehydephenoxy)butane and 2-aminothiophenol have been synthesized in absolute ethanol and characterized by microanalytical data, magnetic measurements, ¹H NMR, ¹³C NMR, UV-visible, IR-spectra, mass spectra and conductance measurements. The extractability of divalent cations was evaluated as a function of relationship between distribution ratios of the metal and pH or ligand concentration. The highest extraction percentage of Cu⁺² and Ni⁺² were at pH 7.0 and 6.4, respectively. The ligand can effectively be used in solvent extraction of copper(II) and nickel(II) from aqueous phase to organic phase.     

Simple hollow fiber renewal liquid membrane extraction method for pre-concentration of Cd(II) in environmental samples and detection by Flame Atomic Absorption Spectrometry

A hollow fiber renewal liquid membrane (HFRLM) extraction method to determine cadmium (II) in water samples using Flame Atomic Absorption Spectrometry (FAAS) was developed. Ammonium O,O-diethyl dithiophosphate (DDTP) was used to complex cadmium (II) in an acid medium to obtain a neutral hydrophobic complex (ML₂). The organic solvent introduced to the sample extracts this complex from the aqueous solution and carries it over the poly(dimethylsiloxane) (PDMS) membrane, that had their walls previously filled with the same organic solvent. The organic solvent is solubilized inside the PDMS membrane, leading to a homogeneous phase. The complex strips the lumen of the membrane where, at higher pH, the complex Cd-DDTP is broken down and cadmium (II) is released into the stripping phase. EDTA was used to complex the cadmium (II), helping to trap the analyte in the stripping phase. A multivariate procedure was used to optimize the studied variables. The optimized variables were: sample (donor phase) pH 3.25, DDTP concentration 0.05% (m/v), stripping (acceptor phase) pH 8.75, EDTA concentration 1.5 × 10⁻² mol L⁻¹, extraction temperature 40 °C, extraction time 40 min, a solvent mixture N-butyl acetate and hexane (60/40%, v/v) with a volume of 100 μL, and addition of ammonium sulfate to saturate the sample. The sample volume used was 20 mL and the stripping volume was 165 μL. The analyte enrichment factor was 120, limit of detection (LOD) 1.3 μg L⁻¹, relative standard deviation (RSD) 5.5% and the working linear range 2-30 μg L⁻¹.     

Sample preparation on polymeric solid phase extraction sorbents for liquid chromatographic-tandem mass spectrometric analysis of human whole blood--a study on a number of beta-agonists and beta-antagonists

Alternative strategies for sample preparation of human blood samples were evaluated including protein precipitation (PP) and solid phase extraction (SPE) on Waters Oasis polymeric columns. Gradient chromatography within 15 min was performed on a Hypersil Polar-RP column combined with a Sciex API 2000 triple quadrupol instrument equipped with an electro-spray interface. Beta-agonists and beta-antagonists available on the Swedish market were included in the study. A combination of zinc sulphate and ethanol was found effective for PP. A clear supernatant was achieved that either could be injected directly on the LC-MS-MS system for analysis or transferred to a SPE column for further extraction and analyte concentration. Retention on the hydrophilic-lipophilic balanced sorbent HLB as well as the mixed mode cationic MCX and anionic MAX sorbents were investigated. On HBL the relative lipophilicity of the target analytes was investigated. At a high pH when the amino alcohols are deprotonised the more non-polar analytes (e.g., carvediol, betaxolol, bisoprolol and propranolol) were well retained on the sorbent and for the majority methanol content higher than 50% in water (v/v) was needed for elution. Some analytes though, with additional weak acidic functionalities (fenoterol, salbutamol, sotalol, and terbutaline) were poorly retained. On MAX the retention of these weak acids was improved when loaded under basic conditions but under neutral conditions analyte recoveries was comparable with HLB. On MCX all the analytes were well retained allowing a wash step of 100% methanol at neutral and low pH. By applying the supernatant from PP in combination with an additional portion of aqueous formic acid (2%) the analytes could be loaded and retained. High extraction recoveries were found for most analytes but for a few, significant losses were seen during PP (e.g., formoterol) and/or evaporation (e.g., fenoterol, formoterol, labetalol and terbutaline). The effectiveness of the sample preparation was evaluated by ESI ion-suppression studies by post column infusion of the target analyte. An ethanol zinc sulphate aq mixture was found to be more effective than acetonitrile, methanol or ethanol for PP of human whole blood samples. Beside suppression by salts in the front peak, only limited suppression from other artefacts such as more lipophilic compounds was found late in the chromatograms. Some tendency though to concentrate more lipophilic artefacts on the Oasis sorbents was seen. These findings show that the Oasis MCX sorbent is well suited for sample preparation of beta-agonists and beta-antagonists from human whole blood if the objective is to cover a great number of the analytes in the same assay.     

Enhancement effect of 3,5-dichlorophenol on the solvent extraction of copper(II) and zinc(II) with acetylacetone and trifluoroacetylacetone

The effect of 3,5-dichlorophenol (DCP) on the extraction of Cu(II) and Zn(II) with acetylacetone (Hacac) and trifluoroacetylacetone (Htfa) in heptane and carbon tetrachloride has been investigated. DCP enhances these chelate extractions; the largest effect is observed on the extraction of Cu(II) with Hacac, which is much larger than the corresponding synergistic effect seen with neutral electron donors such as trioctylphosphine oxide. By analysing the various equilibria involved, the enhanced extraction has been ascribed to the formation of association complexes of the bis(beta-diketonato) chelates (MA(2)) with DCP as MA(2).nDCP (n = 1 for A = tfa and n = 2 for A = acac) in the organic phase, and the association constants have been determined. The association constants increase in the following order of ligand and metal(II): tfa < acac and Zn(II) < Cu(II). These orders are exactly opposite those observed in the adduct formation of the chelates with neutral electron donors.     

Hyphenation of optimized microfluidic sample preparation with nano liquid chromatography for faster and greener alkaloid analysis

A glass liquid–liquid extraction (LLE) microchip with three parallel 3.5 cm long and 100 μm wide interconnecting channels was optimized in terms of more environmentally friendly (greener) solvents and extraction efficiency. In addition, the optimized chip was successfully hyphenated with nano-liquid chromatography with ultraviolet and mass spectrometric detection (nanoLC–UV–MS) for on-line analysis. In this system, sample pretreatment, separation and detection are integrated, which significantly shortens the analysis time, saves labor and drastically reduces solvent consumption. Strychnine was used as model analyte to determine the extraction efficiency of the optimized 3-phase chip. Influence of organic solvent, pH of feed phase, type of alkaloid, and flow rates were investigated. The results demonstrated that the 3-phase chip nanoLC–UV/MS hyphenation combines rapid (∼25 s) and efficient (extraction efficiency >90%) sample prep, with automated alkaloid analyses. The method was applied to real samples including Strychnos nux-vomica seeds, Cephaelis ipecacuanha roots, Atropa belladonna leaves, and Vinca minor leaves.     

Polyelectrolyte coatings prevent interferences from charged nanoparticles in SPME speciation analysis

In this work we present a new approach for protection of the fiber in solid phase microextraction (SPME) from interfering charged particles present in the sample medium. It involves coating of commercial poly(dimethylsiloxane) extraction phase with polyelectrolyte layer composed of poly(diallyldimethylammonium chloride), and poly(sodium 4-styrenesulfonate). The modified fiber provides reproducible, convenient and fast extraction capabilities toward the model analyte, triclosan (TCS). A negatively charged polyelectrolyte coating prevents sorbing oxidic nanoparticles from both partitioning into the PDMS phase and aggregation at its surface. The results for the TCS/nanoparticle sample show that the polyelectrolyte layer-modified solid phase extracts just the free form of the organic compound and enables dynamic speciation analysis of the nanoparticulate target analyte complex.     

Spectroscopic and Electrochemical Studies of Transition Metal Complexes with N,N′-Bis(2-aminothiophenol)-1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and Structure Effects on Extractability of Ligand towards some Divalent Cations

Summary. La(III), Cu(II), Ni(II), and Zn(II) metal complexes with a novel quadridentate Schiff base derived from 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and 2-aminothiophenol were synthesized and characterized by microanalytical data, elemental analysis, magnetic measurements, ¹H NMR, ¹³C NMR, UV-Vis, IR, mass spectra, cyclic voltammetric and conductance measurements. The extractability of divalent cations was evaluated as a function of relationship between distribution ratio of the metal and pH or ligand concentration. The highest extraction percentage of Cu²⁺ and Ni²⁺ showed pH 7.0 and 6.4. It was concluded that the ligand can effectively be used in solvent extraction of copper(II) and nickel(II) from the aqueous phase to the organic phase.     

Flow injection on-line displacement/solid phase extraction system coupled with flame atomic absorption spectrometry for selective trace silver determination in water samples

A novel flow injection (FI) on-line displacement solid phase extraction preconcentration and/or separation method coupled with FAAS in order to minimize interference from other metals was developed for trace silver determination. The proposed method involved the on-line formation and subsequently pre-sorption of lead diethyldithiocarbamate (Pb-DDTC) into a column packed with PTFE-turnings. The preconcentration and/or separation of the Ag(I) took place through a displacement reaction between Ag(I) and Pb(II) of the pre-sorbed Pb-DDTC. Finally, the retained analyte was eluted with isobutyl methyl ketone (IBMK) and delivered directly to nebulizer for measuring. Interference from co-existing ions with lower DDTC complex stability in comparison with Pb-DDTC, was eliminated without need for any masking reagent. With 120 s of preconcentration time at a sample flow rate of 7.6 mL min−1, an enhancement factor of 110 and a detection limit (3 s) of 0.2 μg L−1 were obtained. The precision (RSD, n = 10) was 3.1% at the 10 μg L−1 level. The developed method was successfully applied to trace silver determination in a variety of environmental water samples and certified reference material.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Solid phase extraction of trace amount of Cu(II) using functionalized-graphene

A novel and selective method for the fast determination of trace amounts of Cu(II) ions in water samples has been developed. The first organic-solution-processable functionalized-graphene (SPF-Graphene) hybrid material with porphyrins, porphyrin-graphene nanohybrid, 5-(4-aminophenyl)-10, 15, 20-triphenyl porphyrin and its photophysical properties including optical (TPP) and grapheme oxide molecules covalently bonded together via an amide bond (TPP-NHCO-SPFGraphene) were used as absorbent for extraction of Cu(II) ions by solid phase extraction method. The complexes were eluted with HNO₃ (2 M) 10% (vol/vol) methanol in acetone and determined the analyte by flame atomic absorption spectrometry. The procedure is based on the selective formation of Cu(II) at optimum pH by elution with organic eluents and determination by flame atomic absorption spectrometry. The method is based on complex formation on the surface of the ENVI-18 DISK? disks modified porphyrin-graphene nanohybrid, 5-(4-aminophenyl)-10,15,20-triphenyl porphyrin (TPP) and grapheme oxide molecules covalently bonded together via an amide bond (TPP-NHCO-SPFGraphene) followed by stripping of the retained species by minimum amounts of appropriate organic solvents. The elution is efficient and quantitative. The effect of potential interfering ions, pH, TPP-NHCO-SPFGraphene, amount, stripping solvent, and sample flow rate were also investigated. Under the optimal experimental conditions, the break-through volume was found to about 1000 mL providing a preconcentration factor of 600. The maximum capacity of the disks was found to be 398 ± 3 μg for Cu²⁺. The limit of detection of the proposed method is 5 ng per 1000 mL. The method was applied to the extraction and recovery of copper in different water samples.     

Electrochemical properties of metal complexes of dithio-acid derivatives and their application in extraction polarography

Metal complexes with dithiocarbamic (dtc), xanthic (xan) and dithiophosphoric (dtp) acids give rise to one or more polarographic waves in dimethylformamide and in mixtures of extracting solvents and ethanol. The electrons are found to be transferred stepwise in the case of unfilled d-shell metal complexes. The shift of half-wave potential depends on the ligand, increasing in the order dtp < xan < dtc. In solvents with low solvation power the electrode processes are more reversible. The linear dependence of the limiting current on the chelate concentration has been used for determining the metal in the organic phase without re-extraction. Pb(II), Bi(III) and As(III) have been separated with dtp as extractant, and the concentrations of Co(II), Ni(II) and Zn(II) complexes (simultaneously extracted) have been determined polarographically.     

The efficiency of chemical vapour generation of transition and noble metals

The efficiency data from individual reports on chemical vapour generation (CVG) of transition and noble metals are overviewed with respect to the ways that they were obtained. The values derived from direct measurement of analyte in the gaseous phase or obtained from comparison with other sample introduction techniques reflect well the true chemical vapour generation efficiency. The efficiencies reported this way do not exceed 30%. On the other hand, the percentage efficiency values derived from determination of analyte remaining in the waste liquid, usually in the high tens, can substantially overestimate the efficiency by neglecting the analyte retained within the system.     

Trace enrichment and determination of silver by immobilized DDTC microcolumn and flow injection atomic absorption spectrometry

Flow injection (FI) system incorporating a microcolumn of immobilized diethyldithiocarbamate (DDTC) on surfactant-coated alumina was combined with atomic absorption spectrometry for on-line trace enrichment and determination of silver in different matrices. Silver was deposited on the microcolumn by processing a standard or solution of analyte at pH 3-4 on the column. Injection of 250 μl of ethanol then served to elute the retained species to atomic absorption spectrometry (AAS). A sample volume of 20 ml resulted in a pre-concentration factor of 125, and precision at the 20 μg l⁻¹ was 4% (R.S.D.). The procedure was applied to tap water, well water, rain water, sea water, radiology film, and lead concentrate samples. The accuracy was assessed through recovery experiments, independent analysis by furnace-AAS, and analysis of certified reference material.     

Analysis of Local Anesthetics in Biological Samples via Kinetically Calibrated Liquid-Phase Solvent Bar Micro-Extraction Combined with HPLC

In this study, a liquid-phase solvent bar micro-extraction technique was used to investigate both the extraction and back-extraction processes of the target analyte. A novel concentration curve method and a classic time curve method, used under the same experimental conditions, verified the symmetry between the extraction process (target analyte moves from sample matrix to the organic solvent-based extraction phase) and the back-extraction process (target analyte moves from organic solvent to the sample matrix), providing the basis to use the target analyte in the back-extraction process to calibrate its extraction process. A quantitative calibration can be achieved using back extraction on the target analyte from the blank sample matrix in the organic solvent. Information from the process of back extraction of the target analyte, such as the time constant a, can be directly used to calculate the initial concentration of the target analyte in the sample matrix. This new kinetic calibration method employs a liquid-phase solvent bar micro-extraction technique combined with high-performance liquid chromatography with a diode array detector (HPLC-DAD) and was successfully used to analyze three local anesthetics in biological samples; it extends the application of the kinetic calibration to HPLC-DAD and establishes a novel, simple and accurate method to determine the concentration of the free drug in biological samples and its protein-binding ratio.