Poly(γ-alkyl L-glutamates). II. Optical rotatory dispersion studies in organic solvents

Conformations of a series of poly(γ-alkyl L -glutamates) (ethyl, n-propyl, n-butyl, isobutyl, and isoamyl) were studied by ORD and infrared absorption methods. All except the n-propyl ester were found to be in helical form in nonpolar non-aromatic solvents such as ethyl acetate, chloroform, ethylene dichloride, methylene chloride, carbon tetrachloride, 2-chloroethanol, dimethylformamide, and dioxane. In such cases, the Cotton effects due to the n–π* transition of peptide bonds occurred near 234 mμ and were of a magnitude similar to those found for poly(γ-benzyl L -glutamate) and poly-L -methionine in nonpolar non-aromatic organic solvents. These four polypeptides in aromatic nonpolar solvents, such as benzene, benzyl alcohol, pyridine, and m-cresol, were also found to be in helical form, although the ORD parameters differed considerably from the values in non-aromatic solvents. An essential cause seems to be the interaction of π electrons on peptide bonds with π electrons in the solvents. Helix-coil transitions of these esters in chloroform-dichloroacetic acid mixtures (dichloroacetic acid seems to be a random coil-forming solvent) were expressed by the Shechter-Blout formulation. This was not true, however, for helix–coil transitions in benzyl alcohol–dichloroacetic acid mixtures. The dependence of the helical stability of these polypeptides in chloroform solution upon the side-chain length and upon temperature is discussed.     

A crystal transition in poly(γ-n-alkyl L-glutamate)s

A thermally reversible crystal transition was found for γ-helical poly(γ-n-alkyl L -glutamate)s (alkyl = ethyl, propyl, butyl, and amyl). The transition temperature is higher than that of the side-chain mechanical dispersion, and decreases from 115 to ?5°C, as the alkyl groups become longer. The transition in poly(γ-n-propyl L -glutamate) is clearly first order. The structures were analyzed by x-ray diffraction at various temperatures. It is noteworthy that the pseudohexagonal form observed below the transition temperature is less ordered than the hexagonal form at higher temperatures. The mechanism of this transition is discussed.     

Crystal transition and structure of poly (γ-n-alkyl glutamate)s

The nature of the crystal transition of the α-helical forms of poly (γ-n-alkyl glutamate)s (alkyl = ethyl, propyl, and butyl) is described. The transition is thermally reversible, and its temperature T₂ is much higher than the glasslike transition temperature T₁ associated with the side-chain motion. The main chains undergo large-scale motion (librational about the chain axis and translational along the axis) above T₃ ≈ 200°C. The structure observed below T₂ is anomalously disordered compared with that observed between T₂ and T₃. The crystal structure emerging above T₂ is analyzed for a typical sample of poly(γ-n-propyl L -glutamate). The trigonal unit cell contains three α-helices so that each helix is surrounded by other helices in the same fashion, but the helices are not interrelated by a crystallographic symmetry element. The side chains suffer no particular change at T₂. The main-chain motion gives rise to the T₂ transition by inducing attractive forces between interpenetrating side chains.     

Synthesis of a new poly(carboxybetaine) with peptide main chain

A new poly(carboxybetaine) whose main chain is composed of peptide bonds was synthesized from poly(γ-methyl L -glutamate). The side chains of poly(γ-methyl L -glutamate) were exchanged to carboxybetaine structures by three reactions. Our new poly(carboxybetaine) has 84% carboxybetaine structures in the side chains, as determined by ¹H NMR measurements. The presence of betaine structures in the side chains was confirmed by viscosity measurements.     

Novel Copolymers of 4-Fluorostyrene. 1. Alkyl Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, alkyl ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH = C(CN)₂ (where R is 2-methyl, 3-methyl, 4-methyl, 4-ethyl, 4-i-propyl, 4-butyl, 4-i-butyl, and 4-t-butyl) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 4-ethyl (42.6) > 4-butyl (29.4) > 4-t-butyl (26.7) > 4-i-butyl (1.6) > 4-i-propyl (1.29) > 3-methyl (1.26) > 2-methyl (0.8) > 4-methyl (0.4). High T _g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 183–500°C range with residue (5–30% wt.), which then decomposed in the 500–800°C range.     

Novel copolymers of styrene. 1. Alkyl ring-substituted propyl 2-cyano-3-phenyl-2-propenoates

Trisubstituted ethylenes, alkyl ring-substituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₃H₇ (where R is H, 2-methyl, 3-methyl, 4-methyl, 4-ethyl, 4-propyl, 4-i-propyl, 4-butyl, 4-i-butyl, 4-t-butyl) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2–4% wt.), which then decomposed in the 500–800°C range.     

D(−)- and L(+)-γ-Carboxyglutamic Acid (Gla): Resolution of Synthetic Gla Derivatives

The chemical resolution of γ,γ′-di-t-butyl DL -N-benzyloxycarbonyl-γ-carboxy-glutamate is described in detail (preliminary account see [1]). The D (?)-derivative was obtained as a crystalline quinine salt, and the L (+)-derivative as a crystalline salt with (?)-ephedrine in yields of 44 and 70%, respectively. Physical data are indicated for the enantiomers of γ,γ′-di-t-butyl N-benzyloxycarbonyl-γ-carboxyglutamate, γ,γ′-di-t-butyl γ-carboxyglutamate, and γ-carboxyglutamic acid. The absolute configurations and optical purities of the γ,γ′-di-t-butyl (+)- and (?)-N-benzyloxycarbonyl-γ-carboxyglutamates were determined by removal of the protecting groups and decarboxylation to optically active glutamic acid.     

Synthesis and styrene copolymerization of novel trisubstituted ethylenes: 1. Alkyl ring-substituted isopropyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, alkyl ring-substituted isopropyl 2-cyano-3-phenyl-2-propenoates, RPhCH = C(CN)CO₂CH(CH₃)₂ (where R is H, 2-methyl, 3-methyl, 4-methyl, 4-ethyl, 4-propyl, 4-i-propyl, 4-butyl, 4-i-butyl, 4-t-butyl) were prepared and copolymerized with styrene. The ethylenes were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and isopropyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C NMR. All the ethylenes were copolymerized with styrene in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by FTIR, ¹H and ¹³C NMR. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2-5% wt.), which then decomposed in the 500–800°C range.     

Multichain copoly(α-amino acid). II. Preparation and properties of multi-Nϵ-poly(γ-benzyl-L-glutamyl)copoly(L-lysine γ-methyl-L-glutamate)

A number of multi-N^?-poly(γ-benzyl-L -glutamyl)copoly(L -lysine γ-methyl-L -glutamate)s with branches having various degrees of polymerization and with various intervals of the grafting sites in the core molecule were prepared in N,N-dimethylformamide containing dimethyl sulfoxide by the reaction of N-carboxy anhydride of γ-benzyl L -glutamate with random copoly(L -lysine γ-methyl-L -glutamate)s of different composition with various anhydride-initiator ratios. The relationship between the intrinsic viscosity measured in a coil solvent, dichloroacetic acid (DCA), and the number-average molecular weight determined by osmometry was found to be expressed by the Mark–Houwink–Sakurada equation for the multichain copoly(α-amino acid)s which were made from the same polymeric initiator. The observed α values of the multichain copoly(α-amino acid)s in the equation were lower than that of linear poly(γ-benzyl-L -glutamate). The solvent induced helix–coil transition of the multichain copolymer was investigated in the chloroform?DCA system by the ORD technique. Two kinds of transition regions were clearly distinguished: The α-helices of the core molecules underwent the transition at lower DCA concentration and those of the branch chains at higher DCA concentration. The reduced viscosity of the multichain copoly-(α-amino acid) increased slightly between the two transition regions, in contrast to the large decrease in the reduced viscosity of linear poly(γ-benzyl-L -glutamate) during the helix–coil transition.     

Novel Copolymers of Styrene. 1. Alkyl Ring-Substituted Butyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylenes, alkyl ring-substituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂C₄H₉ (where R is 2-methyl, 3-methyl, 4-methyl, 2-ethyl, 4-ethyl, 4-butyl, 4-t-butyl, 4-i-butyl) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and butyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-ethyl (4.69) > 3-methyl (4.18) > 4-t-butyl (2.98) > 2-ethyl (2.52) > 4-butyl (2.47) > 4-methyl (1.86) > 4-i-butyl (0.94) > 2-methyl (0.87). Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3–8% wt), which then decomposed in the 500–800°C range.     

Composites 3. Reinforcement of biodegradable matrices by helical polypeptides

Blends of poly(ε-caprolactone) as the matrix material and 1,2,4, or 8 wt.-% of a poly-peptide were prepared by dissolution in a cosolvent and coprecipitation into cold methanol. A low-and a high-molecular-weight poly(γ-benzyl L -glutamate), a poly(γ-methyl L -glutamate) and a poly(D ,L -phenylalanine) were used as reinforcing components and compared with a liquid-crystalline (LC) polyester derived from a double-substituted terephthalic acid. Films of all blends were subjected to stress-strain measurements. A weak reinforcing effect was found for the poly(γ-benzyl L -glutamate)s, a somewhat stronger influence for the other polypeptides and the strongest effet for the LC-polyesters 1 .     

Effect of substituents in the styrene ring on the dynamic mechanical relaxations of a styrene-crosslinked unsaturated polyester resin

The dynamic mechanical properties of a series of polyester resins made from a maleic/phthalic anhydride-based unsaturated polyester crosslinked with each of styrene, 4-methyl styrene, 4-ethyl styrene, 4-n-butyl styrene, 4-isopropyl styrene, tertiary butyl styrene, 4-chlorostyrene, and 3,4-dichlorostyrene were studied. The order of the α transition temperatures was as expected from that for the homopolymers, except in the case of the chlorostyrenes, for which dipolar interactions with the polyester chain may be important. The styrene bridges appeared to be involved in a steric interaction (and in the case of the chlorostyrenes, a dipolar interaction) with the β relaxing ester species. It is suggested that both the γ and γ′ relaxations involve similar interactions between the matrix and the relaxing moieties. For the 4-n-butyl styrene resin, an additional relaxation below ?170°C was observed, and is ascribed to relaxation of the n-butyl group.     

Piezoelectric relaxation in poly(γ-methyl-L-glutamate) at high temperature

Piezoelectric relaxation has been studied on elongated poly(γ-methyl-L-glutamate) films with the α-helical molecular conformation. Relaxation processes are observed near 0 and 100°C. Each process has a dual character composed of relaxational and retardational frequency dependences. The low-temperature process is ascribed to thermal motion of side chains. The high-temperature process, discussed in relation to the dielectric relaxation, is attributed to the ionic dc conduction connected with the two-phase structure of crystalline regions and the electrode polarization.     

Thermal stabilities of homopolymers of amino acids

In order to study the thermal stabilities of the α-helical polyamino acids in the solid state, measurements of the infrared spectra at high temperature, weight loss by thermogravimetry, and the expansion of the α-helix by x-ray diffractometry were carried out on poly(γ-methyl D -glutamate), poly(γ-benzyl L -glutamate), poly-L -alanine, poly(β-benzyl L -aspartate), poly-δ-carbobenzoxy-L -ornithine and poly-ε-carbobenzoxy-L -lysine. The thermal degradation temperatures of these polymers lie between 140°C and 230°C. The α-helical conformation is stable at high temperature in these polyamino acids, except for poly(β-benzyl L -asparatate), unless thermal degradation takes place. As temperature rises, the amide A and the amide I bands of the infrared spectra shift slightly to higher frequencies and the amide II band to lower frequencies. At the same time, the intensities of these amide bands decrease. These changes differ among the different molecules. From the x-ray measurement, it was found that the α-helix expands along the helical axis with temperature. It is expected that the intramolecular hydrogen bonds of the α-helix become weak with increasing temperature and that the state of the hydrogen bonds of the α-helices depends upon the molecules.     

Thermal decomposition of microbial poly(γ-glutamic acid) and poly(γ-glutamate)s

The thermal decomposition of poly(γ-glutamic acid), poly(α-methyl γ-glutamate) and ionic complexes of the polyacid with alkyltrimethyl ammonium salts was studied by TGA, GPC, and FTIR and NMR spectroscopies. It was found that both poly(γ-glutamic acid) and poly(α-methyl γ-glutamate) depolymerised above 200 °C by unzipping mechanism with generation of pyroglutamic acid and methyl pyroglutamate, respectively. On the other hand, the ionic complexes degraded through a two-stage process, the first stage being cyclodepolymerisation of the poly(γ-glutamate) main chain along with decomposition of the ionic complex promoted by the adsorbed water. Decomposition of the previously generated alkyltrimethyl ammonium compound followed by unspecific cracking of the resulting nitrogenated compounds accounted for the second degradation step, at higher temperatures. Mechanisms explaining the decomposition of the three studied systems were proposed according to collected data.     

On the chichibabin amination of pyrimidine and N-alkylpyrimidinium salts using liquid ammonia/potassium permanganate

Treatment of the 2-R-pyrimidines ( 1 , R = methyl, ethyl, i-propyl and t-butyl) with potassium amide/liquid ammonia/potassium permanganate leads to amination at C-4(6). The yields of the 4(6)-amino compounds 3 in-crease in the order 2-methyl (10%), 2-ethyl (30%), 2-i-propyl (45%) and 2-t-butyl (60%). Treatment of the 2-R-N-methylpyrimidinium salts ( 4 , R = hydrogen, methyl) with liquid ammonia/potassium permanganate leads to a regiospecific imination at C-6, the corresponding 2-R-1,6-dihydro-6-imino-1-methylpyrimidines 6 being obtained in 80-85% yield. It is proved by ¹⁵N-labelling that no ring opening is involved in these imination reactions. Treatment of the imino compounds with base leads to the corresponding 2.R-6-methylamino-pyrimidines 8 , involving, as proved by ¹⁵N-labelling, an ANRORC-mechanism. 2-t-Butyl-1-ethylpyrimidinium tetrafluoroborate ( 9b ) when treated with liquid ammonia/potassium permanganate undergoes N-deethylation, 2-t-butylpyrimidine being exclusively formed.     

Computer simulation and structure analysis of polypeptide derivatives of cyclotriphosphazene

A quantum-chemical analysis and experimental investigation of the structure of poly(γ-methyl L-α-glutamate) and poly(γ-benzyl L-α-glutamate) linked with the triphosphazene ring via aminophenoxy groups were performed. The computer simulation showed that these compounds with a total degree of polymerization of amino acid sequences of n ≤ 60 are close to the rigid-rod conformation in struture, whereas the rod is distorted to the arch architecture at n > 60. According to X-ray data, the α helices of polypeptide segments are arranged into two-dimensional hexagonal packing. By means of the DSC technique, the glass transition associated with the freezing-out of the mobility of side chains was revealed, transitions to the mesophase were determined, and it was established that the helix type experiences a local change characteristic of poly(γ-benzyl glutamate) derivatives of cyclotriphosphazene in the solid state.     

Convenient esterification of poly(γ-glutamic acid) produced by microorganism with alkyl halides and their thermal properties

The esterification of poly(γ-glutamic acid) (γ-PGA) produced by Bacillus subtilis F2-01 with alkyl halides was carried out at 60°C in N-methyl-2-pyrrolidinone (NMP) in the presence of sodium bicarbonate to obtain the corresponding esterified γ-PGA. The thermal properties of these γ-PGA esters were examined by differential scanning calorimetry and thermogravimetry. γ-PGA esters were more stable than free acid type γ-PGA, which decomposed at 210°C. Melting temperature (T_m) of γ-PGA esters could be observed at 230-250°C. T_m of γ-PGA n-alkyl esters reached a maximum at an alkyl chain length of n = 3. © 1995 John Wiley & Sons, Inc.     

Dynamic relaxation behavior of copolymers of n-butyl methacrylate with n-butyl acrylate and of 2-hydroxyethyl methacrylate with ethyl acrylate,n-butyl acrylate,and dodecyl methacrylate

The effect of the α-methyl group on the mobility of the main and side chains of methacrylateacrylate copolymers has been investigated. Poly(ethyl acrylate) shows a small secondary loss maximum (attributed to the rotation of ? COOR side chains) at 145 K, while in the case of poly(n-butyl acrylate) this relaxation process is smeared out or possibly absent. On the contrary, poly(n-butyl methacrylate) and poly(2-hydroxyethyl methacrylate) exhibit secondary relaxations at about 278 and 301 K, respectively. From the dynamic mechanical response spectra of methacrylate-acrylate copolymers one can see that the removal of the α-methyl group causes a qualitative change in the molecular mechanism of the secondary relaxation, presumably as a consequence of the different participation of the main chains. The existing data, however, are insufficient to quantify these differences. The low-temperature relaxation attributed to internal motion within the side groups is not distinctly affected by the presence of α-methyl groups. If both components of the copolymer display the low-temperature relaxation (above 77 K), the loss maxima preserve their identity to a large extent. The effect of copolymer composition on the main (glass) transition temperature has been described by means of a one-parameter equation.     

Synthesis of some 7-substituted 3-chloro-3,4-dihydro-1-hydroxycarbostyrils by the reduction cyclization of α-chloro-β-(4-substituted-2-nitrophenyl)propionic acids

A new method was developed for the synthesis of some 7-substituted 3-chloro-3,4-dihydro-l-hydroxycarbostyrils 3c-g in which α-chloro-β-(4-substituted-2-nitrophenyl)propionic acids 2c-g were reductively cyclized by catalytic hydrogenation over platinum-on-carbon sulfided catalyst. In particular, this method was applied to α-chloro-β-(2-nitrophenyl)propionic acids bearing 4-methyl 2c , 4-ethyl 2d , 4-ethoxy 2e , 4-(n-butyl 2f and 4-phenyl 2g substituents to afford good yields of the corresponding 7-methyl 3c , 7-ethyl 3d , 7-ethoxy 3e , 7-(n-butyl) 3f , and 7-phenyl 3g substituted 3-chloro-3,4-dihydro-l-hydroxycarbostyrils. The various 4-substituted α-chloro-β-(2-nitrophenyl)propionic acids 2c-q were synthesized by reacting the in situ diazotized salts of the appropriate 4-substituted-2-nitroanilines in aqueous acetone with acrylic acid in the presence of cuprous chloride and hydrochloric acid. All compounds prepared in this study were characterized by microanalytical and ir and nmr spectral data.