Reaction of silylketene acetals with acryloyl and mono substituted acryloyl chlorides.

The reaction of silylketene acetals with acryloyl, methacryloyl and crotonyl chlorides gave, after addition of methanol, mainly substituted glutaric esters, probably via a (2 + 2) cycloaddition.     

SmI2 reduced thioesters as synthons of unstable acyl radicals: direct synthesis of potential protease inhibitors via intermolecular radical addition

Aromatic alpha-heterosubstituted thioesters were found to undergo radical 1,4-addition reactions to a series of alpha,beta-unsaturated amides and one ester when subjected to the single electron reducing agent, samarium diiodide, at -78 degrees C. These thioesters derived from alpha-amino acids represent a synthetically useful synthon of unstable acyl radicals. This reaction conveniently provides access to gamma-ketoamides and esters in yields up to 90%, structures that are common in various protease inhibitors derived from peptides. Examples with acryloyl and methacryloyl derivatives of alpha-amino acids and dipeptides lead directly to tri- and tetrapeptide mimetics possessing the gamma-ketoamide functionality. No epimerization was observed with the mild conditions used for these reactions.     

可聚合脂质体的研究 Ⅳ含丙烯酰基的类脂分子及其与亲水性丙烯酰单体的共聚物

可聚合脂质体的研究Ⅳ含丙烯酰基的类脂分子及其与亲水性丙烯酰单体的共聚物金威曲青蓝李子臣李福绵（北京大学化学与分子工程学院北京１００８７１）关键词可聚合类脂分子，共聚合，自组织，脂质体脂质体因其优异的生物相容性做为药物释放材料而备受瞩目．一般说来，...     

A rational synthesis of polyacrylates with discogenic side groups

The ferric chloride mediated oxidative coupling of 3,3 ,4,4-tetrahexyloxybiphenyl with 2-hexyloxyanisole followed by demethylation gave 3,6,7,10,11-pentahexyloxy-2-hydroxyor triphenylene. Reaction with tert -butyldimethylsilyl-protected 6-bromohexanol, removal of the protecting group, and condensation with acryloyl chloride methacryloyl chloride gave acrylate and methacrylate monomers with hexamethylene 'spacers'. Alternatively, reaction of 3,6,7,10,11-pentahexyloxy-2-hydroxytriphenylene with 2-(2-chloroethoxy)ethanol followed by acryloyl chloride or methacryloyl chloride gave acrylate and methacrylate monomers with diethylenoxy 'spacers'. Both of the poly(acrylate) homopolymers and the poly(methacrylate) homopolymer with the diethylenoxy 'spacer' gave columnar liquid crystal phases. This is contrary to the current perception that the methacrylate polymer backbone is too inflexible to be incorporated in columnar phases.     

Direct synthesis of fluorinated peroxides. V. The preparation of pentafluorosulfurperoxy esters by reactions of pentafluorosulfur hydroperoxide with acyl fluorides

The reaction of SF₅OOH with acyl fluorides in the presence of NaF has been investigated and found to yield new peroxy esters of the type RC(O)OOSF₅. An alternate method of synthesis using SF₅OOCl and acyl chlorides is discussed and the cesium fluoride catalyzed conversion of two of the esters to RCF(OF)OOSF₅ is described.     

Synthesis and Polymerization of 2-(β-Substituted Acryloyl)-1 -Met hacryloyloxy naphthalenes

Some 2-(β-substituted acryloyl)-l-methacryloyloxy-naphthalenes (II) were synthesized by the reaction of the corresponding 2-(β-substituted acryloyl)-l-naphthols with methacryloyl chloride. These monomers were polymerized with 2, 2′-azoisobutyronitrile. The properties of the resulting oligomers as photosensitive resins are described.     

Efficient synthesis of ferrocenylenones by Friedel-Crafts acylation with EtAlCl2-Me3Al

Efficient synthesis of ferrocenylenones using a Friedel-Crafts acylation reaction is described. Acryloyl, methacryloyl, crotonoyl, cinnamoyl, and β-methylcrotonoyl chlorides react with ferrocene in the presence of a Lewis acid (EtAlCl₂ or EtAlCl₂-Me₃Al) to give the corresponding ferrocenylenones (acryloyl, methacryloyl, crotonoyl, cinnamoyl, and methylcrotonoylferrocenes) in good isolated yields. Besides ferrocenylenones, chloroactylferrocene is also synthesised by this method.     

Equilibrium shift in the rhodium-catalyzed acyl transfer reactions

Rhodium/phosphine complexes catalyze equilibrium acyl transfer reactions between acid fluorides, aryl esters, acylphosphine sulfides, and thioesters. The use of appropriate co-substrates to accept heteroatom groups shifted the equilibrium to desired products. Acylphosphine sulfides and aryl esters were converted to acid fluorides using benzoylpentafluorobenzene as the fluoride donor, and the fluorination reaction of thioesters employed (4-tolylthio)pentafluorobenzene. Acid fluorides were converted into acylphosphine sulfides and thioesters using diphosphine disulfides and disulfides/triphenylphosphine, respectively. Aryl esters were obtained from acid fluorides and phenols in the presence of triphenylsilane. Aryl esters, acylphosphine sulfides, and thioesters were also interconverted in the presence of rhodium complexes. These rhodium-catalyzed acyl transfer reactions proceeded under neutral conditions without using acid or base. The involvement of acyl rhodium intermediates in these reactions was suggested by the carbothiolation reaction of thioesters and alkynes.     

Picolinyl ester fragmentation mechanism studies with application to the identification of acylcarnitine acyl groups following transesterification

Acyl picolinyl esters provide excellent data to identify the structures of acyl groups. However, the mechanisms for the formation of fragment ions from picolinyl esters are unsettled. Proposed structures for fragment ions have focused on long-chain groups and may not accommodate results from medium- and short-chain acyl groups. Using deuterium-labeled organic acids, we have investigated the mechanisms for the formation of fragment ions. Based on these studies, we propose a new mechanism that is consistent with the experimental data. We then tested the mechanisms by analyzing selected acylcarnitines. Transesterification of acylcarnitines was performed by reaction with 3-pyridylcarbinol and potassium tert-butoxide in dichloromethane to produce acyl picolinyl esters. The picolinyl esters were separated and detected by gas chromatography/electron ionization-mass spectrometry. Each mass spectrum contained a series of peaks with m/z differences of 12, 13, or 14 u depending on the acyl group's chemical structure. The position of an unsaturated bond or branched methyl in the acyl group of acylcarnitine can be readily determined.     

Aminimides. XII. Synthesis,homo- and copolymerization studies of trialkylamine N-acryloyl or N-methacryloyl glycinimides and β-aminopropanimides

Some representative examples of a new family of aminimide monomers, i.e., trialkylamine N-acryloyl or N-methacryloyl glycinimides and β-aminopropanimides have been prepared and studied. These are the first examples of a possible large family of primary aminimide monomers. With radical initiators, the acryloyl and monosubstituted methacryloyl monomers readily homopolymerize. The disubstituted methacryloyl aminimides do not homopolymerize under the same conditions. All of the new monomers copolymerize with styrene, methyl methacrylate, and n-butyl acrylate. The various polymers were characterized by IR, DTA, TGA, GPC and inherent viscosities. When heated (160°C) the polymers liberate amine and crosslink in the presence of active hydrogen moieties to give resins with carbamate, urea, allophonate, etc., residues. When no active hydrogens are available during heating, polymers can be prepared with pendent primary isocyanate groups. This preliminary work shows these monomers to be highly useful for preparing a wide variety of reactive copolymers.     

聚醚聚氨酯的光聚合及其产物的性能

感光材料;扩链剂;聚醚聚氨酯的光聚合及其产物的性能     

Functionalized monomers based on N-(4-hydroxy phenyl)maleimide

N-(4-Hydroxy phenyl)maleimide (HPMI) is functionalized with acryloyl, methacryloyl, allyl, propargyl and cyanate groups and the structures of the materials are characterized by FTIR, ¹H NMR and ¹³C NMR. Thermal curing behaviours of the monomers and thermal stabilities of the polymers are studied using thermal analysis. Introduction of polymerizable groups shifts the curing exotherm to low temperatures, and the curing behaviour is dictated by the polymerizable substituent present in the aromatic ring. Polymer from acryloyl-functionalized monomer shows the highest thermal stability (402 °C), whereas the highest char value (49 % at 700 °C) is noted for the polymer obtained from propargyl-functionalized monomer. Polymers derived from functionalization of HPMI with acryloyl and methacryloyl showed better thermal stabilities. Thermosets formed by the thermal polymerization of HPMI functionalized with propargyl and cyanate groups showed higher char values at 700 °C in nitrogen atmosphere.     

Investigation of the conformation and electronic spectra of simple organic molecules by the NDDO method

Calculations have been performed by using the semi-empirical all-valence-electron NDDO method for the molecules ethylene, formaldehyde, formyl fluoride, carbonyl fluoride, butadiene, acrolein, glyoxal, acryloyl fluoride, acrylic acid, glyoxalic acid and oxalic acid. The conformational stability of the conjugated systems were correctly reproduced with the exception of acrolein and acryloyl fluoride. The calculated dipole moments are in good qualitative agreement with the experimental values. It has been found that the ionization potentials are higher by a factor of 1.35 than the experimental ones. The singlet—singlet and singlet—triplet transition energies and oscillator strengths of ethylene, formaldehyde and formyl fluoride are presented. A factor of 1.46 is needed for good agreement with the experimental transition energies.     

全氟和多氟烷基磺酸的研究 IX. 5-卤-3-氧杂-全氟戊磺酰氟的化学转化

5-Halo-3-oxa-perfluoropentanesulfonic acids 2,4 were obtained in high yields by treating the corresponding sulfonyl fluorides successively with KOH and concentrated H2SO4: Treatment of the acids with P2O5 gave corresponding anhydrides 3, 5. 3 reacted with various alcohols in the presence of pyridine to yield sulfonates 6. 5-Iodo-3-oxa-perfluoropentanesulfonyl fluoride (1) was converted to the acyl fluoride 9 by fuming sulfuric acid. Depending on the reaction temperature 9 can be hydrolyzed to fluorosulfonyl perfluoroalkanoic acid 10 and/or mixed dibasic acid 11. A similar phenomenon was also observed in the case of hydrolysis of fluorocarbonyl-perfluoromethanesulfonyl fluoride(13). Alcohol reacted readily with the acyl fluoride group but not with the sulfonyl group in 9 giving carboxylic esters, which can be further transformed to the corresponding sulfonates. Perfluoroalkoxide ion -O(CF2)2O(CF2)2SO2F prepared from 9 and F- reacted with active alkyl halides yielding the corresponding ethers. The interaction of 5-halo-3-oxa-perfluoroalkane-sulfonyl fluoride with AlCl3 was investigated. Friedel-crafts acylation of aromatic compounds with 9 in the presence of anhydrous AlCl3 is also reported. The yields of the desired ketones can be improved by using CCl4 as a solvent and changing the order of addition of reactants.     

Selectivity of acylation of ethanolamines with (meth)acryloyl chlorides

The selectivity with respect to N-acylation of the reactions of N,N-bis(2-hydroxyethyl)amine and N-methyl(2-hydroxyethyl)amine with acryloyl and methacryloyl chlorides was examined.     

Effect of the Reactant Ratio on the Kinetics of Methanolysis of Acyl Chlorides

The apparent second-order rate constants for the reaction of methacryloyl chloride with methanol regularly increase on raising the acyl chloride-to-alcohol ratio. The variation of the rate constants is described by the Michaelis-Menten equation, indicating that the process involves initial formation of an associate with a probable structure of charge-transfer complex (CTC). Thermodynamic parameters of the CTC formation and rate constants and activation parameters for the transformation of CTC into the products have been determined.     

Hydroxamic acid polymers. Effect of structure on the chelation of iron in water: II

The effect of structure on the ability of hydroxamic acid polymers to chelate iron(III) was examined. The polymers were derived from acryloyl or methacryloyl backbones that bore side chains terminated in hydroxamic acids. The side chain length, which establishes the atomic chain distances between hydroxamic acid groups, had the most pronounced effect on the stability constant of the iron chelate. It was this atomic chain distance that determined how easily the three neighboring hydroxamic acids could fit the octahedral sphere of the iron. Other structural changes such as the presence or absence of methyl groups on the backbone or on the hydroxamic acid nitrogen had little measurable effect. The stability of the iron complexes appeared to be optimum at an 11-atom spacing between hydroxamic acids and decreased with shorter or longer spacing distances.     

Phosphorus in organic synthesis—XI Amino acids and peptides—XXI : Reaction of diethyl phosphorocyanidate(DEPC) with carboxylic acids. A new synthesis of carboxylic esters and amides

Diethyl phosphorocyanidate(DEPC) reacts with carboxylic acids in the presence of triethylamine leading to transient formation of acyl cyanides, but in presence of alcohols or amines, carboxylic esters or amides are produced. DEPC is especially effective for the synthesis of amides and peptides, and showed a satisfactory result on the Young racemization test.     

The diene synthesis with sulfur-containing derivatives of acrylic acids

Reaction of aqueous solutions of salts of acrylic acids with thioepi chlorohydrin affords thietyl acrylates, which on hydrolysis give 3-hydroxythietane, and on oxidation with hydrogen peroxide give 3-hydroxythietane 1,1-dioxide. The diene synthesis was carried out with these acrylates, and also with acryloyl and methacryloyl isothiocyanates.The authors thanks M. I. Mironova for the IR spectra and the elemantal analyses.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups : Part II. N-acylphenylhydroxylamines

The problems associated with the conversion of commercial carboxylic acid ion exchangers to the acid chloride have been studied and a synthesis of a cross-linked poly(acryloyl chloride) is described. Reaction with phenylhydroxylamine produced a chelating ion exchanger, possessing acyl oxime functional groups, whose properties are compared with those of an aroyl oxime exchanger described earlier. Resin capacity from the acyl oxime group was 0.45 mmole g^-1, and the resin had a rapid equilibration rate. A column separation of mercury and lead is discussed.