Sidewall epoxidation of single-walled carbon nanotubes: a theoretical prediction

[reaction: see text] By means of a two-layered ONIOM approach, we predict that sidewall epoxidation of single-walled carbon nanotubes (SWNTs) with dioxiranes is viable. The SWNT epoxides thus produced could be precursors for further chemical modification of SWNTs, given the abundant and well-established chemistry of organic epoxides. This opens the door for routine chemical manipulation of SWNTs.     

The radiation degradation of a nanotube-polyimide nanocomposite

The radiation degradation of a nanotube-polyimide nanocomposite was studied. Radiation chemistry was observed that was not present in the unmodified polymer or in the imbedded single-walled carbon nanotubes (SWNTs) themselves. The tensile properties were found to be improved by the addition of SWNTs in the unirradiated materials, and no deterioration in these properties with irradiation was observed. The SWNTs were found to have a detrimental effect on the optical properties however. The transparency of the composite was degraded significantly faster by electron-beam radiation than the neat polymer was. This may make the SWNT/polyimide composites unsuitable for some space applications. Electron Spin Resonance (ESR) measurements determined that the SWNTs interfere with the radical chemistry in the irradiated materials. This could be due to energy dissipation by the SWNT network, preventing the formation of radical species, or alternatively, preferential reaction or termination of radicals by the nanotubes. FT-Raman spectroscopy was found to be a very useful tool for examining SWNTs embedded at low concentrations. It revealed no signs of SWNT degradation up to 10 MGy.     

Cover Picture

The cover picture shows a single-walled carbon nanotube (SWNT) functionalized with nucleophilic carbenes at the sidewall. Normally, single-walled nanotubes exist in the form of insoluble bundles. The sidewall addition of reactive organic groups such as radicals, nitrenes, or carbenes such as the ones shown in the cover picture disrupts the bundles. The background of the picture shows a typical AFM image of such derivatized SWNTs. The isolated SWNTs are soluble in organic solvents giving black solutions. This enables a spectroscopic characterization of nanotubes in solution. With this versatile sidewall functionalization the decisive requirements for the development of technological applications such as the production of ultrathin films or the processing to polymer composites with new electronic and mechanic properties have been compiled. Details about this new chemical funtionalization of SWNTs is described by Hirsch et al. on pp. 4002 ff.     

Hydroboration of C(100) surface,fullerene, and the sidewalls of single-wall carbon nanotubes with borane

Hydroboration of three allotropes of carbon, i.e., diamond (100) surface, [60]fullerene, and single-wall carbon nanotubes (SWNTs), with borane (BH(3)) has been explored by means of quantum chemical calculations. The calculations predicted that the hydroboration of C(60) and the C(100)-2x1 surface occurs readily, whereas the hydroboration of the sidewall of an armchair (5,5) SWNT is thermoneutral with a barrier height of 11.5 kcal/mol. This suggests that sidewall hydroboration, if viable, would be highly reversible on the (5,5) SWNT. The as-hydroborated carbonous materials can be good starting points for further chemical modification and manipulation of these carbonous materials, given the abundant chemistry of organoboranes.     

Lipid-carbon nanotube self-assembly in aqueous solution

One major drawback associated with single-walled carbon nanotubes (SWNTs) in the liquid phase is their hydrophobicity-induced aggregation, which prevents utilization of the unique physical and chemical properties of single SWNTs. Recently it has been found that lysophospholipids, or single-tailed phospholipids, can readily form supramolecular complexes with SWNTs and the resultant SWNT solubility is superior to that provided by nucleic acids, proteins, and surfactants such as sodium dodecyl sulfate. Using transmission electron microscopy, lysophospholipids were observed forming striations on SWNTs in a vacuum. Although the morphology of the striations seemingly favors the hemimicellular model, serious doubts remain about the arrangement of individual lipids within the striations. Here we present an in silico study of the binding of zwitterionic lysophosphatidylcholine to an SWNT. We present compelling evidence that the binding of lipid surfactants to cylindrical nanostructures in the liquid phase does not obey any of the three popular models in the literature. Understanding the binding of lipid amphiphiles to SWNTs facilitates the bottom-up design of novel nanostructures for supramolecular chemistry and nanotechnology and fuels new field studies of nanotoxicity and nanomedicine.     

Dispersion of single‐walled carbon nanotubes using nucleobase‐containing poly(acrylamide) polymers

Single‐walled carbon nanotubes (SWNTs) possess extraordinary properties, but suffer from poor solubility and a lack of purity. Of the possible routes available to solubilize and purify nanotube samples, the use of noncovalent functionalization is ideal as carbon nanotube properties are not deleteriously affected. A multitude of different dispersants have been investigated thus far, but of particular interest is deoxyribonucleic acid (DNA), which has previously been demonstrated to effectively separate metallic and semiconducting carbon nanotubes. Here, we investigate the ability of synthetic nucleobase‐containing poly(acrylamide) polymers to produce stable nanotube dispersions in organic solvents. Polymers bearing different nucleobase and backbone structures, as well as block copolymers with different block sequences were investigated. Polymer:SWNT mass ratios and solvent compositions were optimized for the nucleobase‐functionalized polymers, and semiconducting and metallic SWNT populations were identified by a combination of UV‐Vis‐NIR absorption, Raman, and fluorescence spectroscopy. These results demonstrate the capacity for synthetic DNA analogues to disperse SWNTs in organic media. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2611–2617     

Unweaving the rainbow: a review of the relationship between single-walled carbon nanotube molecular structures and their chemical reactivity

Single-walled carbon nanotubes (SWNTs) are a fundamental family of distinct molecules, each bearing the possibility of different reactivities due to their intrinsically distinct chemical properties. SWNT syntheses generate a heterogeneous mixture of species with varying electronic character, lengths, diameters and helicities, (n,m), as well as other amorphous, graphitic and metal catalyst impurities. In recent years, selective syntheses and post-synthetic separation strategies have advanced, driven by the requirement for pure SWNTs displaying particular features. Covalent surface modifications are widely-used to adapt SWNTs for specific applications with modified solubility, compatibility and specific functionalities. In many cases, such reactions have been found to be selective, illuminating the fundamentally distinct chemistry of each (n,m) species. This differential reactivity has found immediate utility in facilitating the sorting of nanotubes according to specific diameter, electronic properties and, most importantly, helicity. In this tutorial review, we discuss a wide range of selective reactions, the mechanisms that are thought to govern selectivity, and the challenges of separating, characterising and regenerating the modified SWNTs.     

A density functional study of the 13C NMR chemical shifts in functionalized single-walled carbon nanotubes

The 13C NMR chemical shifts for functionalized (7,0), (8,0), (9,0), and (10,0) single-walled carbon nanotubes (SWNTs) have been studied computationally using gauge-including projector-augmented plane-wave (GIPAW) density functional theory (DFT). The functional groups NH, NCH3, NCH2OH, and CH2NHCH2 have been considered, and different sites where covalent addition or substitution may occur have been examined. The shifts of the carbons directly attached to the group are sensitive to the bond which has been functionalized and may, therefore, be used to identify whether the group has reacted with a parallel or a diagonal C-C bond. The addition of NH to a parallel bond renders the functionalized carbons formally sp3-hybridized, yielding shifts of around 44 ppm, independent of the SWNT radius. Reaction with a diagonal bond retains the formal sp2 hybridization of the substituted carbons, and their shifts are slightly lower or higher than those of the unsubstituted carbon atoms. The calculated 1H NMR shifts of protons in the functional groups are also dependent upon the SWNT-group interaction. Upon decreasing the degree of functionalization for the systems where the group is added to a parallel bond, the average chemical shift of the unfunctionalized carbons approaches that of the pristine tube. At the same time, the shifts of the functionalized carbons remain independent upon the degree of functionalization. For the SWNTs where N-R attaches to a parallel bond, the average shift of the sp2 carbons was found to be insensitive to the substituent R. Moreover, the shifts of the functionalized sp3 carbons, as well as of the carbons within the group itself, are independent of the SWNT radius. The results indicate that a wealth of knowledge may be obtained from the 13C NMR of functionalized SWNTs.     

Phthalocyanine-pyrene conjugates: a powerful approach toward carbon nanotube solar cells

In the present work, a new family of pyrene (Py)-substituted phthalocyanines (Pcs), i.e., ZnPc-Py and H(2)Pc-Py, were designed, synthesized, and probed in light of their spectroscopic properties as well as their interactions with single-wall carbon nanotubes (SWNTs). The pyrene units provide the means for non-covalent functionalization of SWNTs via π-π interactions. Such a versatile approach ensures that the electronic properties of SWNTs are not impacted by the chemical modification of the carbon skeleton. The characterization of ZnPc-Py/SWNT and H(2)Pc-Py/SWNT has been performed in suspension and in thin films by means of different spectroscopic and photoelectrochemical techniques. Transient absorption experiments reveal photoinduced electron transfer between the photoactive components. ZnPc-Py/SWNT and H(2)Pc-Py/SWNT have been integrated into photoactive electrodes, revealing stable and reproducible photocurrents with monochromatic internal photoconversion efficiency values for H(2)Pc-Py/SWNT as large as 15 and 23% without and with an applied bias of +0.1 V.     

Vertical alignment of single-walled carbon nanotube films formed by electrophoretic deposition

Films of chemically shortened and functionalized single-walled carbon nanotubes (SWNTs) have been formed on a gold electrode by electrophoretic deposition. Applying ultrasonic energy resulted in dramatic changes of the film morphology; the deposited SWNT bundles reassembled and oriented normal to the electrode. Oriented SWNT bundles with high density (more than 250 bundles/microm (2)) not only presented narrow size distributions, but uniformly spread on the electrode. We discuss the mechanism of SWNT orientation by analyzing the variation in the film morphology with ultrasonication time. In addition, we suggest that the 3D displays of AFM images can lead to misjudgment of nanotube alignment. The method for aligning SWNTs normal to the electrode may be competitive with chemical vapor deposition or screen printing, the predominant methods by which vertically aligned SWNT films have been fabricated to date.     

New Multifunctional Porous Materials Based on Inorganic–Organic Hybrid Single‐Walled Carbon Nanotubes: Gas Storage and High‐Sensitive Detection of Pesticides

Single‐walled carbon nanotubes (SWNTs) that are covalently functionalized with benzoic acid (SWNT‐PhCOOH) can be integrated with transition‐metal ions to form 3D porous inorganic–organic hybrid frameworks (SWNT‐Zn). In particular, N₂‐adsorption analysis shows that the BET surface area increases notably from 645.3 to 1209.9 m² g^?1 for SWNTs and SWNT‐Zn, respectively. This remarkable enhancement in the surface area of SWNT‐Zn is presumably due to the microporous motifs from benzoates coordinated to intercalated zinc ions between the functionalized SWNTs; this assignment was also corroborated by NLDFT pore‐size distributions. In addition, the excess‐H₂‐uptake maximum of SWNT‐Zn reaches about 3.1 wt. % (12 bar, 77 K), which is almost three times that of the original SWNTs (1.2 wt. % at 12 bar, 77 K). Owing to its inherent conductivity and pore structure, as well as good dispersibility, SWNT‐Zn is an effective candidate as a sensitive electrochemical stripping voltammetric sensor for organophosphate pesticides (OPs): By using solid‐phase extraction (SPE) with SWNT‐Zn‐modified glassy carbon electrode, the detection limit of methyl parathion (MP) is 2.3 ng mL^?1.     

Electronic properties of n-type carbon nanotubes prepared by CF4 plasma fluorination and amino functionalization

Single-walled carbon nanotubes (SWNTs) have been fluorinated by CF4 plasma exposure and further functionalized with 1,2-diaminoethane. The degree of amino functionalization is dependent on the degree of initial fluorination rather than oxygen or carbon defects. Reaction at both ends of 1,2-diaminoethane was observed to increase with fluorine content. Back-gated SWNT devices have shown p-type semiconducting behavior for CF4-functionalized SWNTs and n-type semiconducting behavior for amino-functionalized SWNTs. The degree of n-type behavior increases with the amount of nitrogen attached to the SWNTs.     

Surfactant-free nanofluids containing double- and single-walled carbon nanotubes functionalized by a wet-mechanochemical reaction

Single-walled carbon nanotubes (SWNTs) and double-walled carbon nanotubes (DWNTs) have been functionalized through the wet-mechanochemical reaction method. Results from the infrared spectrum and zeta potential measurements show that the hydroxyl groups have been introduced onto the treated SWNT and DWNT surfaces. Transmission electron microscope observations revealed that the SWNTs and DWNTs were cut short after being milled. SWNTs and DWNTs with optimized aspect ratio can be obtained by adjusting the ball milling parameters. Thermal conductivity enhancement of water-based nanofluids containing treated carbon nanotubes (CNTs) shows augmentation with the increase of temperature mainly due to the effects of an ordering liquid layer forming around the chemical surfaces of CNTs. Moreover, the thicker interfacial layer of water molecules on the surfaces of CNTs with smaller diameter, such as SWNTs, is in favor of greater thermal conductivity enhancement compared with the thinner one on the surfaces of DWNTs or MWNTs with larger diameter.     

Synthesis and characterization of a grapevine nanostructure consisting of single-walled carbon nanotubes with covalently attached [60]fullerene balls

A grapevine nanostructure based on single-walled carbon nanotubes (SWNTs) covalently functionalized with [60]fullerene (C60) has been synthesized and characterized in detail. Investigations into the ball-on-tube carbon nanostructure by ESR spectroscopy indicate a tendency for ground-state electron transfer from the SWNT to the C60 moieties. The cyclic-voltammetric response of the nanostructure film exhibits reversible multiple-step electrochemical reactions of the dispersed C60, which are strikingly similar to those of the C60 derivatives in solution, but with consistent negative shifts in the redox potential. This results from the covalent linkage of C60 to the surfaces of the SWNTs in the form of monomers and manifests the electronic interaction between the C60 and SWNT moieties.     

The effect of length of single‐walled carbon nanotubes (SWNTs) on electrical properties of conducting polymer–SWNT composites

DC conductivity of conjugated polymer‐single‐walled carbon nanotube (SWNT) composite films has been measured for different SWNT concentrations. The composite was prepared by dispersing SWNTs in the poly (3‐octylthiophene), P3OT matrix already dissolved in xylene. The conductivity of the composite films showed a rapid increase as the SWNT concentration increases beyond a certain value. This behavior is explained in terms of percolating paths provided by the SWNTs in the volume of polymer matrix. To investigate the effect of length of nanotubes on the percolation conductivity, different SWNT samples were employed with similar diameter but varying tube lengths. It was found that the conductivity of the composite films is strongly dominated by the length of the nanotubes. Lower percolation limit and high conductivity value of composite films is observed for longer nanotubes. Furthermore, the conductivity is observed to be dependent on the size of the host polymer molecule also. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 89–95, 2010     

Purification of HiPCO carbon nanotubes via organic functionalization

We report a new method for the purification of HiPCO single-wall carbon nanotubes (SWNT), which consists of the following sequence: (a) organic functionalization of the as-produced nanotubes (pristine tubes, p-SWNT), (b) purification of the soluble functionalized nanotubes (f-SWNT), (c) removal of the functional groups and recovery of purified nanotubes (r-SWNT) by thermal treatment at 350 degrees C, followed by annealing to 900 degrees C. Each of these steps contributes to the purification, but only their sequential combination leads to high-purity materials. Organic functionalization makes the SWNT more easy to handle, which results in a better manipulation for potential practical uses. The electronic properties of the purified tubes are investigated via Raman and NIR spectroscopies along with transmission electron microscopy.     

Mechanically Interlocked Single‐Wall Carbon Nanotubes

Extensive research has been devoted to the chemical manipulation of carbon nanotubes. The attachment of molecular fragments through covalent‐bond formation produces kinetically stable products, but implies the saturation of some of the C? C double bonds of the nanotubes. Supramolecular modification maintains the structure of the SWNTs but yields labile species. Herein, we present a strategy for the synthesis of mechanically interlocked derivatives of SWNTs (MINTs). In the key rotaxane‐forming step, we employed macrocycle precursors equipped with two π‐extended tetrathiafulvalene SWNT recognition units and terminated with bisalkenes that were closed around the nanotubes through ring‐closing metathesis (RCM). The mechanically interlocked nature of the derivatives was probed by analytical, spectroscopic, and microscopic techniques, as well as by appropriate control experiments. Individual macrocycles were observed by HR STEM to circumscribe the nanotubes.     

Assessment of chemically separated carbon nanotubes for nanoelectronics

It remains an elusive goal to obtain high performance single-walled carbon-nanotube (SWNT) electronics such as field effect transistors (FETs) composed of single- or few-chirality SWNTs, due to broad distributions in as-grown materials. Much progress has been made by various separation approaches to obtain materials enriched in metal or semiconducting nanotubes or even in single chiralties. However, research in validating SWNT separations by electrical transport measurements and building functional electronic devices has been scarce. Here, we performed length, diameter, and chirality separation of DNA functionalized HiPco SWNTs by chromatography methods, and we characterized the chiralities by photoluminescence excitation spectroscopy, optical absorption spectroscopy, and electrical transport measurements. The use of these combined methods provided deeper insight to the degree of separation than either technique alone. Separation of SWNTs by chirality and diameter occurred at varying degrees that decreased with increasing tube diameter. This calls for new separation methods capable of metallicity or chirality separation of large diameter SWNTs (in the approximately 1.5 nm range) needed for high performance nanoelectronics. With most of the separated fractions enriched in semiconducting SWNTs, nanotubes placed in parallel in short-channel (approximately 200 nm) electrical devices fail to produce FETs with high on/off switching, indicating incomplete elimination of metallic species. In rare cases with a certain separated SWNT fraction, we were able to fabricate FET devices composed of small-diameter, chemically separated SWNTs in parallel, with high on-/off-current (I(on)/I(off)) ratios up to 105 owing to semiconducting SWNTs with only a few (n,m) chiralities in the fraction. This was the first time that chemically separated SWNTs were used for short channel, all-semiconducting SWNT electronics dominant by just a few (n,m)'s. Nevertheless, the results suggest that much improved chemical separation methods are needed to produce nanotube electronics at a large scale.     

Self-assembly of linear arrays of semiconductor nanoparticles on carbon single-walled nanotubes

Ligand-stabilized nanocrystals (NCs) were strongly bound to the nanotube surfaces by simple van der Waals forces. Linear arrays of CdSe and InP quantum dots were formed by self-assembly using the grooves in bundles of carbon single-walled nanotubes (SWNTs) as a one-dimensional template. A simple geometrical model explains the ordering in terms of the anisotropic properties of the nanotube surface. CdSe quantum rods were also observed to self-organize onto SWNTs with their long axis parallel to the nanotube axis. This approach offers a route to the formation of ordered NC/SWNT architectures that avoids problems associated with surface derivatization.     

Electrochemical and conductivity measurements of single-wall carbon nanotube network electrodes

The electrochemical response of two-dimensional networks of pristine single-wall carbon nanotubes (SWNTs) has been investigated. SWNTs were grown by catalyzed chemical vapor deposition on an insulating SiO2 substrate, and then electrically contacted by lithographically defined Au electrodes. Subsequent insulation of the contact electrodes enabled the electrochemical properties of the SWNT network to be isolated and directly studied for the first time. The electrochemical activity of the SWNT network was found to be strongly dependent on the applied potential. For the same SWNT electrode, the limiting current for the oxidation of 5 mM Fe(phen)32+ was found to be much greater than expected based on the signal for the reduction of 5 mM Ru(NH3)63+. Simultaneous conductance and electrochemical measurements demonstrated decreasing conductance as the potential was scanned negative (versus Ag/AgCl) with the minimum conductance at around the reduction potential for Ru(NH3)63+. These results are consistent with the presence of both metallic and semiconducting SWNTs in the SWNT network electrode. Moreover, these results show that through appropriate choice of mediator and electrode potential, metallic SWNTs can be electrochemically addressed independently of semiconducting SWNTs.