Adsorption of amyloid beta-peptide at polymer surfaces: a neutron reflectivity study.

The adsorption of amyloid beta-peptide at hydrophilic and hydrophobic modified silicon-liquid interfaces was characterized by neutron reflectometry. Distinct polymeric films were used to obtain noncharged (Formvar), negatively (sodium poly(styrene sulfonate)) and positively charged (poly(allylamine hydrochloride)) hydrophilic as well as hydrophobic surfaces (polystyrene and a polysiloxane-dodecanoic acid complex). Amyloid beta-peptide was found to adsorb at positively charged hydrophilic and hydrophobic surfaces, whereas no adsorbed layer was detected on hydrophilic noncharged and negatively charged films. The peptide adsorbed at the positively charged film as patches, which were dispersed on the surface, whereas a uniform layer was observed at hydrophobic surfaces. The thickness of the adsorbed peptide layer was estimated to be approximately 20 A. The peptide formed a tightly packed layer, which did not contain water. These studies provide information about the affinity of the amyloid beta-peptide to different substrates in aqueous solution and suggest that the amyloid fibril formation may be driven by interactions with surfaces.     

In situ adsorption studies of a 14-amino acid leucine-lysine peptide onto hydrophobic polystyrene and hydrophilic silica surfaces using quartz crystal microbalance, atomic force microscopy, and sum frequency generation vibrational spectroscopy

The adsorption of a 14-amino acid amphiphilic peptide, LK14, which is composed of leucine (L, nonpolar) and lysine (K, charged), on hydrophobic polystyrene (PS) and hydrophilic silica (SiO2) was investigated in situ by quartz crystal microbalance (QCM), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. The LK14 peptide, adsorbed from a pH 7.4 phosphate-buffered saline (PBS) solution, displayed very different coverage, surface roughness and friction, topography, and surface-induced orientation when adsorbed onto PS versus SiO2 surfaces. Real-time QCM adsorption data revealed that the peptide adsorbed onto hydrophobic PS through a fast (t < 2 min) process, while a much slower (t > 30 min) multistep adsorption and rearrangement occurred on the hydrophilic SiO2. AFM measurements showed different surface morphologies and friction coefficients for LK14 adsorbed on the two surfaces. Surface-specific SFG spectra indicate very different ordering of the adsorbed peptide on hydrophobic PS as compared to hydrophilic SiO2. At the LK14 solution/PS interface, CH resonances corresponding to the hydrophobic leucine side chains are evident. Conversely, only NH modes are observed at the peptide solution/SiO2 interface, indicating a different average molecular orientation on this hydrophilic surface. The surface-dependent difference in the molecular-scale peptide interaction at the solution/hydrophobic solid versus solution/hydrophilic solid interfaces (measured by SFG) is manifested as significantly different macromolecular-level adsorption properties on the two surfaces (determined via AFM and QCM experiments).     

Surface immobilization of fibronectin-derived PHSRN peptide on functionalized polymer films – Effects on fibroblast spreading

The Pro-His-Ser-Arg-Asn (PHSRN) sequence in fibronectin is a second cell-binding site that synergistically affects Arg-Gly-Asp (RGD). The PHSRN peptide also induces cell invasion and accelerates wound healing. We report on the surface immobilization of PHSRN by spontaneous adsorption on polysiloxane thin films which have different surface free energy characteristics. Low-surface energy (hydrophobic) polysiloxane and the corresponding high-surface energy (hydrophilic) surfaces obtained by UV–ozone treatments were used as adsorbing substrates. The peptide adsorption process was investigated by quartz crystal microbalance with dissipation monitoring and atomic force microscopy. Both adsorption kinetics and peptide rearrangement dynamics at the solid interface were significantly different on the surface-modified films compared to the untreated ones. Fibroblast cells cultures at short times and in a simplified environment, i.e., a medium-free solution, were prepared to distinguish interaction events at the interface between cell membrane and surface-immobilized peptide for the two cases. It turned out that the cell-adhesive effect of immobilized PHSRN was different for hydrophobic compared to hydrophilic ones. Early signatures of cell spreading were only observed on the hydrophilic substrates. These effects are explained in terms of different spatial arrangements of PHSRN molecules immobilized on the two types of surfaces.     

Selective adsorption of protein molecules on phase-separated sapphire surfaces

Site-selective adsorption of protein molecules was found on sapphire surfaces that exhibit a phase separation into two domains: weakly charged hydrophobic domain and negatively charged hydrophilic one. Ferritin and bovine serum albumin molecules, which are negatively charged in a buffer solution, are adsorbed to the hydrophobic domains. Avidin molecules, which are positively charged, are adsorbed to the other domain. Fibrinogen molecules, which consist of both negative and positive modules, are adsorbed to the whole sapphire surface. Hemoglobin molecules, whose net charge is almost zero, are also adsorbed to the whole surfaces. These results indicate that electrostatic double layer interaction is the primary origin of the observed selectivity. Dependence of protein adsorption or desorption behaviors on the pH value can also be interpreted by the proposed model.     

Adsorption of monoclonal IgG on polystyrene microspheres

In this paper the adsorption of a monoclonal antibody IgG-1 isotype against HBsAg onto positively and negatively charged polystyrene beads has been studied. To determine the role played by electrostatic forces in the adsorption process different pH values were used. It was confirmed that the affinity of adsorption isotherms depends on the electrostatic interaction between protein and polymer surface. The maximum adsorption amount is located around the i.e.p. of the dissolved protein, and decreases markedly as pH moves away. Thus, the major driving force for adsorption of monoclonal antibodies on polystyrene beads comes from the hydrophobic interaction between the antibody molecules and the adsorbent surface. Desorption of preadsorbed IgG molecules by increasing ionic strength has shown that the positively charged polystyrene is also more hydrophobic in character than the negatively charged one. Finally, electrokinetic experiments have determined that the electric double layer (e.d.l.) of monoclonal antibody changes as the consequence of adsorbing on charged polymer surfaces.     

Fibrin proliferation at model surfaces: influence of surface properties

Fibrin proliferation from both human fibrinogen solutions and platelet-poor plasma was studied quantitatively as a function of substrate surface properties. A quartz crystal microbalance was used to monitor both protein adsorption and fibrin proliferation in real time at hydrophobic, hydrophilic, positively charged, and negatively charged surfaces. Scanning electron microscopy was used to characterize the morphology of the polymerized fibrin layers. The observed changes in mass indicate that fibrinogen adsorption occurs rapidly and mediates subsequent fibrin proliferation. Notably, substrate surface properties significantly affect the ability of adsorbed fibrinogen to promote fibrin proliferation.     

Adsorption behavior of DNA-wrapped carbon nanotubes on self-assembled monolayer surfaces

We have examined the adsorption of DNA-wrapped single-walled carbon nanotubes (DNA-SWNTs) on hydrophobic, hydrophilic, and charged surfaces of alkylthiol self-assembled monolayers (SAMs) on gold. Our goal is to understand how DNA-SWNTs interact with surfaces of varying chemical functionality. These samples were characterized using reflection absorption FTIR (RAIRS), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. We have found that DNA-SWNTs preferentially adsorb to positively charged amine-terminated SAMs and to bare gold surfaces versus hydrophobic methyl-terminated or negatively charged carboxylic acid-terminated SAMs. Examination of the adsorption on gold of single-strand DNA (ssDNA) of the same sequence used to wrap the SWNTs suggests that the DNA wrapping plays a role in the adsorption behavior of DNA-SWNTs.     

分子动力学模拟多巴在自组装膜上的黏附性

为了更好地理解贻贝在表面的黏附机理,实现水下胶黏,采用分子动力学方法研究了多巴在自组装膜上的黏附性:采用伞形取样和加权柱状图分析方法计算了多巴在不同自组装膜表面的黏附自由能,使用拉伸分子动力学模拟研究了多巴在不同自组装膜表面上黏附后的脱附力.结果表明,多巴在带负电的羧基自组装膜上的黏附能比在带正电的氨基自组装膜上的大,多巴更容易黏附到带负电表面;多巴在带电表面的黏附能比未带电表面的黏附能更强,表明在带电表面黏附更稳定.进一步分析了多巴在不同表面的取向分布,发现多巴与不同表面相互作用的方式不同:与疏水表面主要通过苯环相互作用;与亲水表面主要通过羟基相互作用;与负电表面主要通过氨基相互作用;与正电表面主要通过羧基相互作用.通过模拟比较了多巴在不同自组装膜上的脱附力,发现多巴在带电表面的脱附力比在未带电表面的大,与黏附能的趋势一致.对比4种非带电表面的脱附力,发现多巴在疏水性甲基自组装膜表面的脱附力最大,黏附更稳定,随着表面疏水性的增加,脱附力增大,黏附稳定性增强.本工作可为研发新型水下胶黏剂提供理论指导.     

Adsorption of Bovine Serum Albumin and Lysozyme on Hydrophobic Calcium Hydroxyapatites

The adsorption of bovine serum albumin (BSA) and lysozyme (LSZ) to oleyl phosphate(OP)-grafted calcium hydroxyapatite (OP-CaHAP) with different degrees of hydrophobicity, ranging the number of surface oleyl group per unit nm2 (nO) from 0 to 2.60, was investigated. The pronounced effects of the hydrophobic moiety of adsorbent on protein adsorption were observed. The saturated amount of adsorbed BSA (ns) was increased up to nO = 0.6 by an enlargement of hydrophobic interaction between hydrophobic CaHAP particle and proteins. However, ns decreased at nO >/= 1.3 by increasing the electrostatic repulsive force between negatively charged BSA and OP-CaHAP particles. On the other hand, the ns value of LSZ was continuously increased up to nO = 2.0 and saturated by increasing either the hydrophobic interaction or the electrostatic attraction of positively charged LSZ and negatively charged OP-grafted CaHAPs. The BSA adsorption experiment revealed that the effect of positively charged adsorption sites on the exposed ac or bc crystal faces (C-sites) of the CaHAPs is screened by the OP-groups grafted on their particle surfaces. Copyright 1999 Academic Press.     

DNA and cationic surfactant complexes at hydrophilic surfaces. An ellipsometry and surface force study

The adsorption and formation of DNA and cationic surfactant complexes at the silica-aqueous interface have been studied by ellipsometry. The interaction between the DNA-surfactant complexes at the mica-aqueous interface has been determined by the interferometric surface force apparatus. Adsorption was as expected not observed on negatively charged hydrophilic surfaces for DNA and when DNA-cationic surfactant complexes were negatively charged. However, adsorption was observed when there is an excess of cationic surfactant, just below the point of phase separation. The adsorption process requires hours to reach steady state. The adsorbed layer thickness is large at low surface coverage but becomes more compact and thinner at high coverage. A long-range repulsive force was observed between adsorbed layers of DNA-cationic surfactant complexes, which was suggested to be of both electrostatic and steric origin. The forces were found to be dependent on the equilibration time and the experimental pathway.     

Adsorption of ethoxylated cationic surfactants on self-assembled monolayers of alkanethiols on gold using surface plasmon resonance detection

Adsorption of a series of ethoxylated cationic surfactants at model surfaces of alkanethiol self-assembled monolayers was studied by the surface plasmon resonance technique. Model surfaces were tailor-made by choosing alkanethiols or mixtures of alkanethiols with methyl, hydroxyl, carboxyl, and trimethylammonium groups in terminal position. The ethoxylated and quaternized cationic surfactants having from 2 to 18 oxyethylene units, showed a decrease in adsorbed amount with increasing oxyethylene chain length for both hydrophobic and hydrophilic surfaces. On a negatively charged surface, containing carboxylate groups, the surfactant with only two oxyethylene groups adsorbed strongly due to electrostatic attraction and the adsorption increased with increasing amount of surface carboxylate groups. This work shows the usefulness of self-assembled alkanethiols on gold as a tool for performing surfactant adsorption studies on surfaces with variable hydrophobicity and charge.     

Mucin-chitosan complexes at the solid-liquid interface: multilayer formation and stability in surfactant solutions

The adsorption of a biologically important glycoprotein, mucin, and mucin-chitosan complex layer formation on negatively charged surfaces, silica and mica, have been investigated employing ellipsometry, the interferometric surface apparatus, and atomic force microscopy techniques. Particular attention has been paid to the effect of an anionic surfactant sodium, dodecyl sulfate (SDS), with respect to the stability of the adsorption layers. It has been shown that mucin adsorbs on negatively charged surfaces to form highly hydrated layers. Such mucin layers readily associate with surfactants and are easily removed from the surfaces by rinsing with solutions of SDS at concentrations > or =0.2 cmc (1 cmc SDS in 30 mM NaCl is equal to 3.3 mM). The mucin adsorption layer is negatively charged, and we show how a positively charged polyelectrolyte, chitosan, associates with the preadsorbed mucin to form mucin-chitosan complexes that resist desorption by SDS even at SDS concentrations as high as 1 cmc. Thus, a method of mucin layer protection against removal by surfactants is offered. Further, we show how mucin-chitosan multilayers can be formed.     

Simulation of adsorption of DNA on carbon nanotubes

We report molecular dynamics simulations of DNA adsorption on a single-walled carbon nanotube (SWNT) in an aqueous environment. We have modeled a DNA segment with 12 base pairs (Dickerson dodecamer) and a (8,8) SWNT in water, with counterions to maintain total charge neutrality. Simulations show that DNA binds to the external surface of an uncharged or positively charged SWNT on a time scale of a few hundred picoseconds. The hydrophobic end groups of DNA are attracted to the hydrophobic SWNT surface of uncharged SWNTs, while the hydrophilic backbone of DNA does not bind to the uncharged SWNT. The binding mode of DNA to charged SWNTs is qualitatively different from uncharged SWNTs. The phosphodiester groups of the DNA backbone are attracted to a positively charged SWNT surface while DNA does not adsorb on negatively charged SWNTs. There is no evidence for canonical double-stranded DNA wrapping around either charged or uncharged SWNTs on the very short time scales of the simulations. The adsorption process appears to have negligible effect on the internal stacking structure of the DNA molecule but significantly affects the A to B form conversion of A-DNA. The adsorption of A-DNA onto an uncharged SWNT inhibits the complete relaxation of A-DNA to B-DNA within the time scale of the simulations. In contrast, binding of the A-DNA onto a positively charged SWNT may promote slightly the A to B conversion.     

The Dispersion Properties of Precipitated Calcium Carbonate Suspensions Adsorbed with Alkyl Polyglycoside in Aqueous Medium

The zeta potentials and dispersion properties of precipitated calcium carbonate suspensions adsorbed with alkyl polyglycosides in aqueous medium were investigated. Within the investigated pH ranges, the adsorption curves of alkyl polyglycosides on calcium carbonates show sigmoidal shapes, and the zeta potential decreases as the amount of adsorption increases. At positively charged surfaces of low pH, the adsorption amounts were greater than those at negatively charged surfaces, indicating that alkyl polyglycosides were negatively charged in aqueous solutions. At low concentrations of alkyl polyglycosides, the dispersion stabilities of suspensions were very poor and showed no linearity with zeta potentials over the entire range of pHs, which may be attributed to the onset of hydrophobic interaction between particles due to the adsorption of surfactant molecules. This destabilization continued until monolayer coverage by the surfactant layer was complete. Based on the classical DLVO theory, there may be a strong hydrophobic interaction between particles. Beyond monolayer adsorption, the dispersion stability increases, probably by the formation of hemimicelle or admicelle. Therefore, it is believed that ionization of alkyl polyglycosides and admicelles of surfactants on particle surface plays a key role in the stability of dispersions and the abrupt increase in adsorption. Copyright 2000 Academic Press.     

Interaction of the antimicrobial peptide dicynthaurin with membrane phospholipids at the air-liquid interface

This paper reports the first study on the interaction of the antimicrobial peptide dicynthaurin with 1,2-dipalmitoyl-glycerophosphatidyl-glycerol investigated in monolayers at the air-liquid interface. The influence of the peptide on the two-dimensional phase behavior of the negatively charged lipid was elucidated by means of pressure-area isotherm measurements, fluorescence microscopy, and grazing incidence X-ray diffraction measurements. The pure peptide forms a stable monolayer at the air-liquid interface up to 30 mN/m as shown for both the monomeric and the dimeric cynthaurins. The peptide lipid interaction was monitored in isotherm measurements showing a strong adsorption of the peptide and stabilization at the interface promoted by the lipid monolayer. The X-ray diffraction measurements in agreement with fluorescence microscopy studies showed that the peptide destabilizes the condensed chain lattice, leading to a complete fluidization of the condensed lipid phase on physiological buffer. The adsorption of the peptide to the negatively charged lipid monolayer and the fluidization of the condensed chain lattice suggest a direct link to the peptides' ability to expand the bacterial membrane that would be relevant for the in vivo mode of action.     

Electrostatic orientation of enzymes on surfaces for ligand screening probed by force spectroscopy

In this letter, we show that electrostatic immobilization provides a simple but effective approach for the immobilization and orientation of carbonic anhydrase onto charged surfaces. The enzyme is oriented differently on oppositely charged surfaces, with the majority of active sites facing upward on a positively charged surface and downward on a negatively charged surface. An array of negatively charged microscale surface patterns within a positively charged background was prepared by microcontact printing and used as the substrate to immobilize the enzymes. This enabled the probing of the enzyme orientations on the two differently charged surface regions by force spectroscopy with the same atomic force microscopy (AFM) probe modified with a thiolated sulfonamide inhibitor. The unbinding forces between the inhibitor tip and the enzyme immobilized on the two differently charged surfaces were measured. Two control experiments, blocking of the enzyme active site with a competitive inhibitor and removal of the zinc ion from the enzyme catalytic center, were employed to distinguish between specific and nonspecific interactions and to further verify the differences in enzyme orientation. Autocorrelation analysis of the force histograms was carried out to evaluate the specific single enzyme-inhibitor interaction force.     

Gold nanoparticle decoration of DNA on silicon

Electrostatic assembly of cationic nanoparticles onto the negatively charged backbone of double-stranded DNA has been shown to produce one-dimensional chains with potential use as nanoelectronic components. In this paper, micron long DNA templates stretched on aminosilane- and hexamethyldisilazane-modified silicon surfaces are used to assemble 3.5 nm gold nanoparticles passivated with cationic thiocholine. Atomic force microscopy is used to analyze the density and defects along the approximately 5 nm high structures, with comparison between positively charged and neutral surfaces. Low background adsorption of nanoparticles is facilitated by both these surface chemistries, while the neutral surface yields a more densely packed assembly.     

Molecular modeling of oligopeptide adsorption onto functionalized quartz surfaces

The adsorption of an EAK 16-II oligopeptide sequence in aqueous medium onto functionalized quartz surfaces has been studied by using force field calculations and molecular dynamics methods. Two different surfaces have been simulated respectively involving fully methylated and fully silanolic quartz surfaces. Geometry optimization and molecular dynamics simulations showed that the adsorption process is mainly governed by the electrostatic interactions between SiO- surface groups and the charged residues of the oligopeptide sequence. In particular, it was found that strong electrostatic interactions (a) prompt the parallel orientation of the oligopeptide with respect to the hydrophilic charged surface, resulting in an effective physisorption process and (b) stabilize the beta-sheet configuration of the physisorbed molecules. In particular, the end-on oligopeptide orientations are demonstrated to progressively lie back onto the hydrophilic surface, but this does not happen onto the hydrophobic surface. In any case, no physisorption process was observed for the fully methylated surface, where the molecule is seen to move away from the surface during the simulation time.     

Conformational diversity of the fibrillogenic fusion peptide B18 in different environments from molecular dynamics simulations

The development of specific agents against amyloidoses requires an understanding of the conformational behavior of fibrillogenic peptides in different environments on the microscopic level. We present extensive molecular dynamics simulations of the fibrillogenic Bindin (103-120) B18 fusion peptide for several different environments: a water-trifluorethanol (TFE) mixture, pure water, aqueous buffer containing 100 mM NaCl, and a buffer-vapor interface. The peptide was studied as an isolated molecule in solution or at an interface. In the simulations, the conformational behavior of the peptide was found to strongly depend on the environment in agreement with experimental data. Overall, large portions of the peptide were unstructured. Preformed alpha-helical conformations were least stable in pure water and most stable in the water-TFE mixture and the buffer-vapor interface. In all environments, the alpha-helical conformation was most stable in the region around residues 113-116, which are mainly hydrophilic. Extended configurations in water or buffer folded into structures containing beta-sheets in agreement with data from circular dichroism spectroscopy. In buffer, the beta-sheet content was larger than in water and alpha-beta transitions were observed at elevated temperature. Beta-sheets were formed by hydrophobic residues; turns were formed by hydrophilic residues. A few typical beta-sheets that contain different residues are suggested. A B18 molecule in a strand-loop-strand conformation placed in buffer in contact with vapor was spontaneously adsorbed to the buffer-vapor interface with its hydrophobic side pointing toward the vapor phase. The adsorption induced the formation of turns at positions 108-119 and alpha-helical conformations in the region around residues 114-117. Alpha-helices were parallel to the interface plane in agreement with data from IR reflection absorption spectroscopy.     

On the stability of the polymer brushes formed by adsorption of ionomer complexes on hydrophilic and hydrophobic surfaces

We have studied the effect of normal forces and shear forces on the stability and functionality of a polymer brush layer formed upon adsorption of polymeric micelles on hydrophilic and hydrophobic surfaces. The micelles consist of oppositely charged polyelectrolyte blocks (poly(acrylic acid) and poly(N-methyl 2-vinyl pyridinium iodide), and a neutral block (poly(vinyl alcohol)) or neutral grafts (poly(ethylene oxide)). The strength of the attachment of the micellar layers to various substrates was evaluated with Atomic Force Microscopy. Flow cell experiments allowed for the evaluation of long-term stability of coatings in lateral flow. Fixed angle optical reflectometry was used to quantify protein (BSA) adsorption on the micellar layers after their exposure to flow. The results show that adsorbed micellar layers are relatively weakly attached to hydrophobic surfaces and much stronger to hydrophilic surfaces, which has a significant impact on their stability. Adsorbed layers maintain their ability to suppress protein adsorption on hydrophilic surfaces but not on hydrophobic surfaces. Due to the relatively weak attachment to hydrophobic surfaces the structure of adsorbed layers may easily be disrupted by lateral forces, such that the complex coacervate-brush structure no longer exists.