Hydrothermal saccharification of cotton cellulose in dilute aqueous formic acid solution

Cotton cellulose subjected to a dilute aqueous formic acid solution, at acid concentrations up to 1% (w/w), under hydrothermal conditions in a semi-batch reactor was converted into glucose and oligomers with lower degrees of polymerizations (DP). After heating at 250 °C for 60 min in 0.1% (w/w) aqueous formic acid solution, yields of glucose and total sugar with DP = 1 to 9 were 36.6 and 83.8% (100 × gC/gC of initial cotton sample), respectively, and 5-hydroxymethylfurfural was almost as low as 1%. The yields of glucose and oligomers were significantly improved by adding the acid. The reaction was represented by first-order reaction kinetics with regard to (1 ?C x) where x is the conversion based on the total sugar or glucose yield. At 250 °C, the differences in the rate constants (k ? k _water) were proportional to the square root of formic acid concentration.     

Kinetische Untersuchung der Oxydation von 1,2,4,5-Tetramethylbenzol in einem polaren Lösungsmittel

A kinetic study was made of the liquid-phase oxidation of 1.2.4.5-tetramethylbenzene in polar solvents. It was shown that the catalytic activity of the cobalt salt catalysts used varies as the hydrocarbon concentration decreases, a finding attributed to the anionic effects in the catalyst. The catalytic activity of the cobaltous salts of nicotinic and isonicotinic acid was found to be high at low durene concentrations. Of the bromine derivatives studied as promotors, N-bromoacetamide was found to be the most effective. The effect of the polar solvent on the kinetics of the oxidation of durene was also studied in media containing acetic acid, acetic anhydride and mixtures thereof. The relationship between the rate constant (k) in acetic anhydride and the rate constant (k ₀) in acetic acid is found to be the following: $$\lg k = \lg k_0 + 24.59\frac{{\varepsilon - 1}}{{2\varepsilon + 1}}$$ A tentative mechanism of the oxidation steps is advanced to explain the higher values of the rate constant in acetic anhydride.     

1H NMR study of the kinetics of substituted aniline polymerization. I. Homopolymerization of 2‐methoxyaniline

We studied the kinetics of the oxidative chemical homopolymerization of 2‐methoxyaniline (OMA) in aqueous acid solutions by monitoring OMA depletion with ¹H NMR spectroscopy. We used the same semiempirical kinetic model used for aniline (ANI) homopolymerization to evaluate the experimental data. The reaction kinetics of OMA homopolymerization was similar to that of ANI, although we obtained longer induction and propagation times for OMA. This was attributed to steric hindrance of the bulky methoxy substituent during the coupling reaction. Furthermore, it was suggested that a lower OMA polymerization rate could also be related to a lower concentration of nonprotonated OMA molecules in the reaction solution due to a higher pK_a value for OMA than for ANI. This may also explain the lower OMA end conversion (90%) compared with that of ANI (96%). The OMA end conversion was not influenced substantially by reaction conditions; it was lower than 90% only when high acid or low oxidant (oxidant‐deficient oxidant/OMA ratio) concentrations were applied. Because the oxidant took an active part in polymerization, it markedly influenced the polymerization rate, especially the initiation rate. The OMA initiation and propagation rates increased with increasing oxidant and initial monomer concentrations and with the reaction temperature, but there was no uniform trend in the correlation between the homopolymerization rate and acid concentration. The activation energies of the OMA initiation and propagation were 57 and 10 kJ/mol, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2471–2481, 2001     

Synchronous mineralization of three aqueous non-steroidal anti-inflammatory drugs in electrochemical advanced oxidation process

Electrochemical degradation performances of three non-steroidal anti-inflammatory drugs (NSAIDs), acetaminophen (ACT), aspirin (ASP) and ibuprofen (IBP), were investigated and compared in their alone and mixture conditions using Ti/SnO₂-Sb/La-PbO₂. The pseudo-first-order degradation kinetics (k) order was k_IBP-A (0.110 min^?1) ? k_ASP-A (0.092 min^?1) ? k_ACT-A (0.066 min^?1) in their alone condition, while that was k_ACT-M (0.088 min^?1) ? k_ASP-M (0.063 min^?1) ? k_IBP-M (0.057 min^?1) in their mixture condition. The ^?OH apparent production rate constant of 5.23 mmol L^?1 min^?1 m^?2 and an electrical energy per order (E_EO) value of 6.55 Wh/L could ensure the synchronous degradation of the NSAIDs mixture. The mineralization efficiency of NSAIDs mixture was 86.9% at 240 min with a mineralization current efficiency of 1.67%. Acetic acid and oxalic acid were the main products in the mineralization process for the both conditions. In the mixture condition, there were higher k values at lower initial concentrations and higher current density, while the presence of carbonate and humic acid inhibited their degradation. The results indicated electrochemical advanced oxidation process can effectively and synchronously mineralize NSAIDs mixture in wastewater.     

Effect of bromide salts on the acid hydrolysis of anti-bacterial hydrophilic Schiff base amino acid iron(II) complexes

Salt effects on the kinetics of acid hydrolysis of some novel hydrophilic iron(II) complexes have been investigated in aqueous medium. The ligands are derived from the condensation of amino acids (glycine, L-alanine, L-leucine, L-isoleucine, DL-methionine, DL-serine or L-phenylalanine) and sodium 2-hydroxybenzaldehyde-5-sulfonate. The reaction was studied under conditions of pseudo first order kinetics. The general rate equation was suggested as follows: rate = k _obs[complex], where k _obs = k ₂[H⁺]. The reaction rate decreases with an increase of the salt concentration.     

The effect of the mixing process on reaction kinetics

If the chemical rate constants of the initial reaction steps are large, any observed value of these constants may be affected by the mixing process. To investigate the effect of mixing efficiency on reaction kinetics we use two previously analyzed reaction systems, namely the glutamic aspartic aminotransferase system and the hemoglobin/O₂ system. A time constant k_a for the mixing process is introduced and four values for this parameter are considered, with the fastest essentially corresponding to complete mixing before any reaction can take place. The remaining three values are associated with mixing instruments, since they may be attainable in the real world. To evaluate the mixing efficiency (and conversely determine underlying k_a values) from observed kinetics, mixing was combined with chemical relaxation by temperature jumps initiated at different points in time during the mixing process. Computer simulations permit the development of specific criteria to determine (in reverse) appropriate values of k_a. In this respect, the aminotransferase system proved to be more revealing than the hemoglobin system. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 484–496, 2003     

Inhibition of microbial xylitol production by acetic acid and its relation with fermentative parameters

Precipitated sugarcane bagasse hemicellulosic hydrolysate containing acetic acid was fermented by Candida guilliermondii FTI 20037 under different operational conditions (pH 4.0 and 7.0, three aeration rates). At pH 7.0 and k _L a of 10 (0.75 vvm) and 22.5/h (3.0 vvm) the acetic acid had not been consumed until the end of the fermentations, whereas at the same pH and k _L a of 35/h (4.5 vvm) the acid was rapidly consumed and acetic acid inhibition was not important. On the other hand, fermentations at an initial pH of 4.0 and k _L a of 22.5 and 35/h required less time for the acid uptake than fermentations at k _L a of 10/h. The acetic acid assimilation by the yeast indicates the ability of this strain to ferment in partially detoxified medium, making possible the utilization of the sugarcane bagasse hydrolysate in this bioprocess. The effects on xylitol yield and production are reported.     

Kinetics of copolymerization—I. Kinetic investigation of the polymerization of acrylonitrile in homogeneous phase

A detailed study was made of the kinetics of initiated homopolymerization of acrylonitrile in dimethylformamide and dimethylsulphoxide at 40–60°. The rate of polymerization was found to be proportional to the (initiator concentration)^1/2. The rate of initiation of polymerization was determined by the inhibition method, using three stable free radicals. Trends in the average rate of polymerization were also studied for various initial monomer and solvent concentrations. The overall rate constant (K) was strongly dependent on monomer concentration decreasing with decrease of monomer concentration. It has been shown that the hot radical theory describes accurately, without physical contradiction, the solvent dependence of rate constants of polymerization systems.     

Effect of pH on the reactivity of dipeptides and α-amino acids in the N-acylation

The reaction kinetics of Gly, L-??-Ala, Gly-Gly, L-??-Ala-L-??-Ala and ??-Ala-??-Ala with picryl benzoate in water (40 wt %)-2-propanol was investigated. At pH = 4?C8 the rate constants of N-acylation of the anionic form of dipeptides are less than those of the corresponding amino acid anions, in agreement with their basicity, whereas the relative effective rate constants of reactions depend on pH: in acidic, neutral and slightly alkaline media the k _ef values are higher for the dipeptides, and in a strongly alkaline medium, for the amino acids. These differences are due to the changes in the concentrations of reactive forms of amino acids and dipeptides in the system at varying the medium pH.     

Cobalt electrodeposition on polycrystalline palladium. Influence of temperature on kinetic parameters

Cobalt electrodeposition on polycrystalline palladium was studied at different temperatures using potentiostatic and voltammetric techniques. Temperature effect on kinetics parameters, diffusion coefficient, and charge transfer coefficient was analyzed. The values of nucleation rate and rate constant of the proton reduction reaction (k _PR) increased with the temperature increment and the applied overpotential. The number of active nucleation sites was slightly affected with temperature increase. At higher temperatures, the larger k _PR values suggested the proton reduction process is favored. The temperature effect on the values of the transfer coefficient was analyzed and a decrease in its value with the temperature increase was observed. From a Conway plot, it was observed that entropy change is the main factor that controls the kinetics of the reaction in this system.     

Kinetic Studies on the Copolymerization of Acrylonitrile and Itaconic Acid in Dimethylsulfoxide

The free radical copolymerization of acrylonitrile (AN) with itaconic acid (IA) in dimethylsulfoxide (DMSO) initiated by azobisisobutyronitrile (AIBN) has been found to be chemically controlled even at high conversion. In order to explain this specific finding by Walling's kinetic model, a detailed study on the monomer reactivity ratios (MMRs), decomposition kinetics of AIBN and homopolymerization kinetics of AN was carried out in DMSO from 50 to 80°C. The results suggest that the reactivity ratio of IA is less than unity and always larger than that of AN. Thus, the reaction has an ideal copolymerization behavior when the temperature is increased. It is also found that decomposition of AIBN in DMSO is strictly first order and the decomposition rate constants (k _d) determined by nitrogen evolution technique are acceptable. k_p /k ^0.5 _t ratios of AN were estimated from the off-line conversion data under various monomer and initiator concentration. Additionally, the temperature dependences on MRRs, k _d and k_p /k ^0.5 _t were believed to follow the Arrhenius's law very well.     

Sulfonated organic heteropolyacid salts as a highly efficient and green solid catalysts for the synthesis of 1,8-dioxo-decahydroacridine derivatives in water

In the present study, we introduce two nonconventional ionic liquids [MIMPS]₃PW₁₂O₄₀ (a) and [TEAPS]₃PW₁₂O₄₀ (b) as green and highly efficient solid acid catalysts for the synthesis of 1,8-dioxo-decahydroacridine derivatives. The one-pot three component reaction of 1,3-cyclohexanediones, aromatic aldehydes and aromatic amines or ammonium acetate in water afforded the corresponding 1,8-dioxo-decahydroacridines in excellent yields. This reaction has been carried out in the presence of 1 mol% of catalysts at room temperature. The reusability of the catalysts was demonstrated by a five-run test. Additionally, the catalysts pose several advantages including mild reaction conditions, cleaner reactions and shorter reaction times.     

Lipophilicity data for some preservatives estimated by reversed-phase liquid chromatography and different computation methods

The chromatographic behavior of some preservatives was performed by reversed-phase high-performance liquid chromatography on C18 (LiChroCART, Purosphere RP-18e), C8 (Zorbax, Eclipse XDB-C8), CN100 (Säulentechnik, Lichrosphere) and NH₂ (Supelcosil LC-NH₂) columns. The lipophilicity estimated for the first time on the first three columns are comparable and very well correlated. The mobile phase was a mixture of methanol–water (0.1% formic acid) in different volume proportions from 40% to 60% (v/v) for RP-C18, RP-C8 and RP-CN100 column (exception for parabens on RP-C8 column—the methanol concentrations being from 55% to 65%) and from 30% to 50% (v/v) for RP-NH₂. Highly significant correlations were obtained between different experimental indices of lipophilicity (log k_w, S, φ₀, mean of k and log k, and scores of k and log k corresponding to the first principal component) and computed log P values, and C8 column seems to be more suited for estimating the lipophilicity of the investigated compounds. These direct correlations offer a very good opportunity to derive powerful predictive models via Collander-type equations. The reliability of scores values as lipophilic indices is shown by their high correlation with the log K_ow obtained using classical “shake-flask” technique, log k_w and also some of the computed log P values. In addition, the results obtained applying PCA to the retention data may be used in interpreting the molecular mechanism of interactions between eluents and stationary phases with different polarity and to explain the chromatographic behavior of compounds. Finally, the “congeneric lipophilicity chart” described by the scores corresponding to the first principal component has the effect of separating compounds from each other more effectively from congeneric ((dis)similarity) point of view. The parabens and tert-butylhydroquinone appeared to be the most lipophilic preservatives.     

Kinetics of dissociation of tris-2,2′-bipyridyl-iron(II) cation in aqueous acetic acid solutions

The kinetics of dissociation of tris-2,2′-bipyridyl-iron(II) complex ion have been examined in aqueous acetic acid solutions. The reaction is first order in the complex ion; the dependence of rate on H⁺ is somewhat like that observed in aqueous solutions approaching a limiting value at higher H⁺ concentrations. The influence of solvent composition on the reaction rate under acid-dependent and acid-independent conditions shows an initial retardation by acetic acid. The argument of ion-pair formation based on decrease of dielectric constant proposed to explain the kinetics in other aqueous solvent media was found useless to explain the behavior in acetic acid solutions. Other solvent parameters also did not provide satisfactory correlation with the kinetic results, thus, indicating the operation of more complex microscopic solute-solvent and solvent-solvent interactions. While solvent effects play some part in the rate process, the rate of reaction would tend to zero in the absence of H₂O and H⁺. This interesting observation proved useful in proposing a reaction mechanism that is consistent with the rate behavior over the entire range of solvent composition. The activity of water in the reaction medium is controlled by the content of acetic acid which can effect the structure of water through operation of hydrophobic forces and formation of hydrates. While acetic acid cannot possibly fulfill the role of water in occupying the vacated coordination position, the anomalous rise in rate even under some water deficient conditions seems to be related to the coordinating ability of HSO₄^? derived from H₂SO₄ present in the solution.     

Oxidation of naphthalene and phenanthrene by pyridinium fluorochromate (PFC)—a kinetic and mechanistic study

The kinetics of the oxidation of naphthalene and phenanthrene by pyridinium fluorochromate, C₅H₅NHCrO₃F, PFC, has been studied. The main product of the oxidation is the corresponding quinone. While each oxidation, studied in aqueous acetic acid (80–95%, v/v) medium, is first order with respect to the oxidant, the rate is almost independent of the substrate concentration. The reactions are catalyzed by acid, the acid-catalyzed reactions being very fast, which precluded determination of their order in acid medium. The kinetic isotope effect, k_H/k_D is 5.50 at 303 K for naphthalene. The reaction does not induce polymerization of acrylonitrile. The effects of temperature and solvent compositions were studied and activation parameters evaluated. Probable mechanisms are discussed.     

Kinetics of Low-Temperature Oxidative Chlorination of Benzene in Aqueous Acetic Acid

The kinetics of chlorination of benzene with a mixture of sodium peroxide with hydrochloric acid in aqueous acetic acid at 298 K was studied. The chlorination rate is the highest when the AcOH concentration in the binary solvent is 49.4-40.6 mol % and the ratio of the initial cocentrations of water and sodium peroxide, 18.5–20.2. The linear dependences of logk _app on the AcOH concentration and [H₂O]₀/[Na₂O₂]₀ ratio were obtained.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 792–794.Original Russian Text Copyright © 2005 by Rudakova, Erykalov.     

Influence des associations moleculaires sur la copolymerisation de l'acide acrylique avec l'acide methacrylique et avec l'acrylate de methyle

The copolymerization of acrylic acid with methacrylic acid in bulk is investigated at 40 and 60°. It is confirmed that a “matrix effect” occurs only for high contents of acrylic acid. The critical concentration beyond which the matrix effect disappears is shifted towards lower acrylic acid contents for higher temperatures. The copolymer composition is independent of temperature. The copolymerization of acrylic acid with methyl acrylate is investigated in a mixture which determines an “exaltation of the matrix effect” in the homopolymerization of acrylic acid (molar fractions: m_Monomers = 0.34; m_n-Hexane = 0.52; m_Methanol = 0.14). The resulting copolymers are found to contain a much larger fraction of acrylic acid residues than the copolymers formed in bulk or in toluene or DMF solutions.     

Investigation of the kinetics of aquation of the 1:2 complex between Cr and nitrilotriacetic acid

Aquation of the 1:2 complex between Cr^III and nitrilotriacetic acid (NTA) was monitored using a combination of capillary electrophoresis (CE), ultraviolet–visible (UV–vis) spectrophotometry, and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. To our knowledge, this is the first published report of the use of either CE or ATR-FTIR to monitor the kinetics of ligand exchange reactions of Cr^III–aminocarboxylate complexes. The aquation products were identified as the 1:1 Cr^III complex with NTA and “free” NTA. The 1:1 complex dimerized to form a 2:2 complex in a slower subsequent reaction step. Rates of disappearance of the 1:2 complex were first-order under all experimental conditions. First-order rate constants for aquation, k_obs (h⁻¹), measured using all three techniques were similar at equivalent pH conditions, and with values reported previously in the literature. Measured k_obs values exhibited a complicated pH dependence with three distinct regions: (i) at pH < 6.5, k_obs values increased with decreasing pH, (ii) between pH 6.5 and 8.0, k_obs values were relatively constant, and (iii) at 8.0 < pH < 10.0, k_obs increased with increasing pH and then leveled off. A kinetic model incorporating five distinct aquation pathways was successfully employed to model the pH dependence of k_obs from 0.0 < pH < 10.0. These results show that CE and ATR-FTIR can be used as tools for better understanding ligand exchange processes occurring in aqueous solution.     

Effect of electron-withdrawing power of the substituted group on?OH radical reaction with substituted aryl sulphides: A pulse radiolysis study

In neutral aqueous solution of (phenylthio)acetic acid, hydroxyl radical is observed to react with a bimolecular rate constant of 7.2 × 10^-1 dm³ mol⁻s⁻ and the transient absorption bands are assigned to^•OH radical addition to benzene and sulphur with a rough estimated values of 50 and 40% respectively. The reaction of the^•OH radical with diphenyl sulphide (k = 4.3 × 10⁸ dm³ mol⁻¹ s⁻¹) is observed to take place with formation of solute radical cation, OH-adduct at sulphur and benzene with estimated values of about 12, 28 and 60% respectively. The transient absorption bands observed on reaction of^•OH radical, in neutral aqueous solution of 4-(methylthio)phenyl acetic acid, are assigned to solute radical cation (λ_max = 550 and 730 nm), OH-adduct at sulphur (λ_max = 360 nm) and addition at benzene ring (λ_max = 320 nm). The fraction of^•OH radical reacting to form solute radical cation is observed to depend on the electron-withdrawing power of substituted group. In acidic solutions, depending on the concentration of acid and electron-withdrawing power, solute radical cation is the only transient species formed on reaction of^•OH radical with the sulphides studied.     

The initial oxidative polymerization kinetics of 2,6-dimethylphenol with a Cu-EDTA complex in water

The initial oxidative polymerization kinetics of 2,6-dimethylphenol (DMP) catalyzed by a Cu(II)-EDTA complex in water was studied. The initial polymerization rate of DMP (R₀) increases with an increase in concentrations of DMP and catalyst. R₀ firstly increases with the molar ratio of N/Cu and then decreases. The reaction order with respect to oxygen is 0.1. R₀ increases with NaOH concentration and reaches its maximum value at a concentration of 0.50 mol/L. 1/R₀ is in direct proportion to 1/[DMP]₀, which indicates that the initial polymerization kinetics of DMP in water obeys Michaelis-Menten model. The dissociation rate constant of the intermediate complex (k₂) and Michaelis-Menten constant (K_m) at various temperatures are calculated. It is found that both k₂ and K_m increase with an increase in temperature.