Thermodynamics of aqueous solutions of poly ethylene glycol di-methyl ethers in the presence or absence of ammonium phosphate salts

Precise measurements of density and sound velocity at different temperatures ranging from 283.15 to 308.15 K for solutions of PEGDME250, PEGDME500 and PEGDME2000 in water and of PEGDME500 in aqueous solutions of 0.500 mol kg⁻¹ ammonium di-hydrogen phosphate ((NH₄)H₂PO₄) and di-ammonium hydrogen phosphate ((NH₄)₂HPO₄), binodal curves at temperature ranges 293.15-318.15 K for the aqueous PEGDME500 + (NH₄)₂HPO₄, PEGDME500 + (NH₄)₃PO₄, PEGDME2000 + (NH₄)H₂PO₄, PEGDME2000 + (NH₄)₂HPO₄, PEGDME2000 + (NH₄)₃PO₄ and PPG400 + (NH₄)₂HPO₄ two-phase systems, and liquid-liquid equilibrium data at temperature ranges 298.15-318.15 K for the aqueous PEGDME500 + (NH₄)₂HPO₄ and PEGDME2000 + (NH₄)₂HPO₄ two-phase systems have been taken. From the experimental density and sound velocity data, the apparent specific volume, excess specific volume, isentropic compressibility and isentropic compressibility deviation values have been determined and the effect of temperature, charge on the anion of electrolytes and molar mass of PEGDME on the volumetric and compressibility properties of the investigated polymer solutions as well as on the salting-out effect of PEGDMEs produced by ammonium phosphate salts has been studied.     

Studies on lattice thermal expansion and XPS of ThO2NdO1.5 solid solutions

The lattice parameter changes with respect to temperature (T) have been measured by high temperature X-ray diffraction (HTXRD) technique for ThO₂NdO_1.5 solid solutions containing 23.8 and 42.5 mol% NdO_1.5 in the temperature range from 298 to 2000 K. The temperature versus lattice parameter data have been made use of in calculating the lattice thermal expansivity. The values of thermal expansion of the solid solutions were found to be increased with increase in neodymium oxide content and temperature. The mean linear thermal expansion coefficients in this temperature range for ThO₂NdO_1.5 solid solutions are 12.28 × 10⁻⁶ and 12.90 × 10⁻⁶ K⁻¹, respectively. The binding energies of Th 4f_7/2 and Nd 3d_5/2 energy levels of the solid solutions containing 13.1, 23.8, 31.9, 37.2 and 42.5 mol% NdO_1.5 and two-phase mixtures containing 47.6 and 51.8 mol% NdO_1.5 were experimentally determined by X-ray photoelectron spectroscopy (XPS).     

A new family of pyrazolyl-based anionic bidentate ligands and crystal structure of bis(N-phenyl-2-pyrazolyl-1-carboximidothioato)copper(II)

Three new N,S-donor bidentate pyrazolyl-based ligands abbreviated as [PhNCSPz]⁻, 1, [PhNCSPz^Me2]⁻, 2, and [PhNCSPz^Ph2]⁻, 3, have been synthesized in THF by direct mixing of phenylisothiocyanide with suspension of appropriate sodium-pyrazolate salts and characterized by the common spectroscopic and analytical methods. The Cu(II) complexes of these anionic chelate ligands have been characterized and the crystal structure of Cu(PhNCSPz)₂, 4, has been determined. The space group of complex is P2₁c, with a = 5.9313(3), b = 21.206(1) Å, c = 8.0667(4) Å, β = 103.822(1)°.     

Dephosphorylation of paraoxon by hydroxamate ions in micellar media

The rate-surfactant concentration profiles for the reaction of the insecticide paraoxon with hydroxamate ions (R(CO)·NHO⁻, R = CH₃, R = C₆H₅, R = 2-HOC₆H₄) in aqueous solutions of cetyltrimethylammonium salts, CTAX (X⁻ = Br⁻, Cl⁻, SO₃H⁻) have been measured at pH 11.0 at 30 °C. All these profiles are typical of micelle-assisted bimolecular reactions involving interfacial ion exchanges. The salicylhydroxymic acid-CTACl combination is most reactive.     

Enthalpies of dilution of l-cystine in aqueous solutions of sodium hydroxide, potassium hydroxide and hydrochloric acid

The enthalpies of dilution of l-cystine in solutions of two strong alkalis and one strong acid have been determined by isothermal flow-mix calorimetry at the temperatures 298.15 K, 303.15 K, 308.15 K, 313.15 K and 318.15 K. Equations of apparent enthalpies of dilution have been obtained from the experimental data in terms of the improved McMillan-Mayer theory. Enthalpic interaction coefficients, h₂, h₃, and h₄, are obtained and the values of pair-wise enthalpic interaction coefficient, h₂, discussed in the light of solute-solute and solute-solvent interactions.     

Be and P NMR analyses on Be complexation with cyclo-tri-μ-imidotriphosphate anions in aqueous solution

Microscopic information on the complexation of Be²⁺ with cyclo-tri-μ-imidotriphosphate anions in aqueous solution has been gained by both ⁹Be and ³¹P NMR techniques at −2.3 °C. Separate NMR signals corresponding to free and complexed species have been observed in both spectra. Based on an empirical additivity rule, i.e., proportionality observed between the ⁹Be NMR chemical shift values and the number of coordinating atoms of ligand molecules, the ⁹Be NMR spectra have been deconvoluted. By precise equilibrium analyses, the formation of [BeX(H₂O)₃]⁺ and [BeX₂(H₂O)₂]⁰ (X = non-bridging oxygen donor as a coordination atom in the phosphate groups) has been verified, and the formation of complexes coordinating with the nitrogen atoms of the cyclic framework in the ligand molecule has been excluded. Instead, the formation of one-to-one (ML) complexes, one-to-two (ML₂), together with two-to-one (M₂L) complexes (L = cP₃O₆(NH)₃) has been disclosed, the stability constants of which have been evaluated as log K_ML = 3.87 ± 0.03 (mol dm⁻³)⁻¹, log K_ML2 = 2.43 ± 0.03 (mol dm⁻³)⁻² and log K_M2L = 1.30 ± 0.02 (mol dm⁻³)⁻², respectively. ³¹P NMR spectra measured concurrently have verified the formation of the complexes estimated by the ⁹Be NMR measurement. Intrinsic ³¹P NMR chemical shift values of the phosphorus atoms belonging to ligand molecules complexed with Be²⁺, together with the ³¹P-³¹P spin-spin coupling constants have been determined.     

Redox reactions with bis(η-arene) derivatives of early transition metals

The reactivity of M(η⁶-arene)₂ derivatives of early transition metals (M = Ti, Cr, Mo, arene = MeC₆H₅; M = V, Nb, arene = 1,3,5-Me₃C₆H₃) has been investigated and the syntheses of new and known compounds are described. The derivatives M(CH₃COO)₃, M = Ti, V, Nb, Cr; M(CF₃COO)₃, M = Ti, Nb, Cr; M(acac)₃, M = Ti, V, Mo, acac = acetylacetonato, and M(F₆acac)₃, F₆acac = hexafluoroacetylacetonato, M = V, Nb have been prepared by reaction of the metal bis(arene) derivatives with the appropriate Lewis acid. The crystal and molecular structure of V(F₆acac)₃ has been determined. Hydrogen halides or halogens react with M(η⁶-arene)₂ with formation of metal halides, a highly reactive form of VCl₃ being obtained from V(η⁶-1,3,5-Me₃C₆H₃)₂ and hydrogen chloride in heptane. TiCl₄ oxidizes Ti(η⁶-arene)₂ with complete loss of the arene ligands. An electron transfer process affording ionic derivatives of formula [M(η⁶-MeC₆H₅)₂][TiCl₄(THF)₂], M = Cr (structurally characterized), Mo, has been observed between the THF-adduct of TiCl₄ and the appropriate metal-arene derivative of Group 6.     

Cation-anion interactions involving hydrogen bonds: Syntheses and crystal structures study of hexafluorotitanate(IV) salts with pyridine and methyl substituted pyridines

Fluorotitanates (LH)₂[TiF₆]·nH₂O (1: R = pyridine, n = 1, 2: R = 2-picoline, n = 2, 3: R = 2,6-lutidine, n = 0, 4: R = 2,4,6-collidine, n = 0) and (LH)[TiF₅(H₂O)] (3a: L = 2,6-lutidine) have been synthesized by the reaction of pyridine or corresponding methyl substituted pyridines and titanium dioxide dissolved in hydrofluoric acid. The crystal structures of ionic compounds 1, 2, 3, 3a and 4 have been determined by single-crystal X-ray diffraction analysis. The hydrogen bonding led to the formation of discrete (LH)₂[TiF₆] units (4), chains (1-3), and layers (3a). The additional π-π interactions present in 1, 2, and 4 results in chain structures of 1 and 4 and in a layer structure of 2. The [TiF₆]²⁻ and [TiF₅(H₂O)]⁻ anions were observed by ¹⁹F NMR spectroscopy in aqueous solutions of 1, 2, 3, 3a and 4.     

A new tool for inorganic nitrogen speciation study: simultaneous determination of ammonium ion, nitrite and nitrate by ion chromatography with post-column ammonium derivatization by Nessler reagent and diode-array detection in rain water samples

The paper presents a new method for a simultaneous determination of inorganic nitrogen species in the oxidized (NO₂⁻, NO₃⁻) and reduced (NH₄⁺) form in rain water samples. The method is based on a system of nitrogen species separation employing ion exchange and diode-array detection. The ions are separated in a strong ion-exchanger, nitrites and nitrates are determined directly at 208 and 205 nm, respectively, while the ammonium ions are determined in the column hold-up time after a post-column derivatization by the Nessler reagent, at 425 nm. The use of a diode-array detector permits a simultaneous identification of the inorganic nitrogen species in 8 min. The detection limits obtained are: NO₂⁻, 0.1 mg L⁻¹; NO₃⁻, 0.05 mg L⁻¹; NH₄⁺, 1 mg L⁻¹. The method proposed has been successfully used for speciation analysis of inorganic nitrogen in precipitation.     

Microflow injection chemiluminescence system with spiral microchannel for the determination of cisplatin in human serum

A new microflow injection chemiluminescence (μFI-CL) system was described for the determination of cisplatin in human serum. By using the microchip with double spiral channel configuration, the sensitivity was greatly enhanced due to more efficient mixing of the analyte and reagent solutions. Experimental results revealed that common ions in human serum, such as Mn²⁺, Co²⁺, Fe³⁺, Cu²⁺, Zn²⁺, Ni²⁺, Na⁺, K⁺, Ca²⁺, Cl⁻, NO₃⁻, Ac⁻, CO₃²⁻, PO₄³⁻, SO₄²⁻ did not cause interference with the detection of Pt(II) by using 1,10-phenanthroline as the masking agent. Under the optimized conditions, a linear calibration curve (R² = 0.998) over the range 2.0 × 10⁻⁸ to 2.0 × 10⁻⁶ mol L⁻¹ was obtained with the detection limit of 1.24 × 10⁻⁹ mol L⁻¹. The relative standard deviation was found to be 3.46% (n = 12) for 2.0 × 10⁻⁷ mol L⁻¹. The sample consumption was only 2 μL with the sample throughput of 72 h⁻¹. It had been used for trace platinum determination in cisplatin injection and human serum samples after the dosage of cisplatin. The recovery varied from 97.6 to 103.9%. The results proved that the proposed μFI-CL system had the advantages of high sensitivity and precision, low sample and reagents consumption, and high analytical throughput.     

Preparation and properties of a new solid state borate ion selective electrode and its application

A new borate ion selective electrode using solid salts of Ag₃BO₃, Ag₂S and Cu₂S has been developed. Detailed information is provided concerning the composition, working pH and conditioning of the electrode. An analytically useful potential change occurred from 1 × 10⁻⁶ to 1 × 10⁻¹ M borate ion. The slope of the linear portion was 31 ± 2 mV/10-fold changes in borate concentration. The measurements were made at constant ionic strength (0.1 M NaNO₃) and at room temperature. The effect of Cl⁻, Br⁻, NO₃⁻, SO⁼₄, H₂PO₄⁻ anions and K⁺, Na⁺, Cu²⁺, Ag⁺, Ca²⁺ cations on borate response is evaluated and it was found that only Ag⁺ had a small interference effect. The lifetime of the electrode was more than two years, when used at least 4-5 times a day, and the response time was about 20-30 s. Borate content in waste water of borax factory, tap water of a town situated near to the borax factory and city tap water far from these mines were also determined. The validation was made with differential pulse polarography for the same water sample, and high consistency was obtained.     

Intermolecular/interionic interactions in l-leucine-, l-asparagine-, and glycylglycine-aqueous electrolyte systems

Ultrasonic velocity and density values have been measured for ternary systems (amino acid/di-peptide + salt + water): l-leucine/l-asparagine/glycylglycine each in 1.5 M aqueous solutions of NaCl or NaNO₃ or KNO₃ used as solvents for several concentrations of amino acids/di-peptide at different temperatures in the range of 298.15-323.15 K. The ultrasonic velocity values have been found to increase with increase in amino acids/di-peptide concentration and temperature in all the systems. The increase in ultrasonic velocity with increase in concentration has been discussed in terms of electrostatic interactions occurring between terminal groups of zwitterions (NH₄⁺ and COO⁻) and Na⁺, K⁺, Cl⁻, NO₃⁻ ions. The interactions of water dipoles with cations/anions and with zwitterions have also been taken into consideration. It has been observed that the ion-zwitterion and ion-dipole attractive forces are stronger than those of ion-hydrophobic repulsive forces. These interactions comprehensively introduce the cohesion into solutions under investigation. The cohesive forces are further enhanced on successive increases in solute concentration. Using ultrasonic velocity and density data, the parameters such as isentropic compressibility (κ_s), change (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility, specific acoustic impedance (Z) and relative association (RA) have been computed. The isentropic compressibility values decrease with increase in the concentration of solutes as well as with temperature. The decrease in κ_s values with increase in concentration of l-leucine, l-asparagine and glycylglycine in 1.5 M aqueous solutions of NaCl, NaNO₃ and KNO₃ have been explained in terms of an increase in the number of incompressible molecules/zwitterions in solutions and the formation of compact zwitterions-water dipole and zwitterions-ions structures in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax. (relaxational part of compressibility)_, which is dominant over the corresponding increase of κ_∞ (instantaneous part of compressibility). The trends of variations of Δκ_s, Δκ_s/κ₀, Z and RA with change of concentration and temperature have also been interpreted in terms of various intermolecular/interionic interactions existing in the systems.     

Half-sandwich cyclopentadienyl rhodium complexes bearing pendant sulfur or oxygen ligands and their catalytic behaviors in ethylene polymerization

Two half-sandwich rhodium complexes with sulfur or oxygen functionalized cyclopentadienyl ligands [η⁵-C₅H₄(CH₂)₂SCH₂CH₃]RhI₂3, {[η⁵-C₅H₄(CH₂)₂OCH₃]RhI₂}₂4 have been synthesized and characterized by IR, ¹H-NMR spectra and Elemental analyses. The molecular structures of complexes 3 and 4 have been determined by X-ray crystallographic analysis. Complexes 3, 4 with a pendent arm on cyclopentadienyl ligand have been tested as catalysts for ethylene and norbornene polymerization in the presence of MAO. Complexes 3 and 4 kept high activities of ca. 10⁶ g PE mol⁻¹ Rh h⁻¹ with morderate molecular weight (M_w ≈ 10⁵ g mol⁻¹) of polyethylene in the ethylene polymerization. Catalytic activities, molecular weights of polyethylene have been investigated under the various reaction conditions.     

Simultaneous determination of Mn(II), Cu(II) and Fe(III) as 2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol complexes by adsorptive cathodic stripping voltammetry at a carbon paste electrode

A simple and precise square-wave adsorptive cathodic stripping voltammetry (SW-AdCSV) method has been described for simultaneous determination of Mn(II), Cu(II) and Fe(III) in water samples using a carbon paste electrode. In 0.1 mol L⁻¹ acetate buffer (pH 5) containing 50 μmol L⁻¹ of 2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol (5-Br-PADAP), Mn(II), Cu(II) and Fe(III) were simultaneously determined as metal-complexes with 5-Br-PADAP following preconcentration onto the carbon paste electrode by adsorptive accumulation at +1.0 V (vs. Ag/AgCl/3 M KCl). Insignificant interference from various cations (K⁺, Na⁺, Mg²⁺, Ca²⁺, Al³⁺, Bi³⁺, Sb³⁺, Se⁴⁺, Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Pb²⁺, V⁵⁺, Ti⁴⁺ and NH₄⁺), anions (HCO₃⁻, Cl⁻, NO³⁻, SO₄²⁻ and PO₄³⁻) and ascorbic acid was noticed. Limits of detection of 0.066, 0.108 and 0.093 μg L⁻¹ and limits of quantitation of 0.22, 0.36 and 0.31 μg L⁻¹ Mn(II), Cu(II) and Fe(III), respectively, were achieved by the described method. The described stripping voltammetry method was successfully applied for simultaneous determination of Mn(II), Cu(II) and Fe(III) in ground, tap and bottled natural water samples.     

1-(2′-Pyridylazo)-2-naphtholate complexes of ruthenium: Synthesis,characterization, and DNA binding properties

Reaction of 1-(2′-pyridylazo)-2-naphthol (Hpan) with [Ru(dmso)₄Cl₂] (dmso = dimethylsulfoxide), [Ru(trpy)Cl₃] (trpy = 2,2′,2″-terpyridine), [Ru(bpy)Cl₃] (bpy = 2,2′-bipyridine) and [Ru(PPh₃)₃Cl₂] in refluxing ethanol in the presence of a base (NEt₃) affords, respectively, the [Ru(pan)₂], [Ru(trpy)(pan)]⁺ (isolated as perchlorate salt), [Ru(bpy)(pan)Cl] and [Ru(PPh₃)₂(pan)Cl] complexes. Structures of these four complexes have been determined by X-ray crystallography. In each of these complexes, the pan ligand is coordinated to the metal center as a monoanionic tridentate N,N,O-donor. Reaction of the [Ru(bpy)(pan)Cl] complex with pyridine (py) and 4-picoline (pic) in the presence of silver ion has yielded the [Ru(bpy)(pan)(py)]⁺ and [Ru(bpy)(pan)(pic)]⁺ complexes (isolated as perchlorate salts), respectively. All the complexes are diamagnetic (low-spin d⁶, S = 0) and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on all the complexes shows a Ru(II)–Ru(III) oxidation on the positive side of SCE. Except in the [Ru(pan)₂] complex, a second oxidative response has been observed in the other five complexes. Reductions of the coordinated ligands have also been observed on the negative side of SCE. The [Ru(trpy)(pan)]ClO₄, [Ru(bpy)(pan)(py)]ClO₄ and [Ru(bpy)(pan)(pic)]ClO₄ complexes have been observed to bind to DNA, but they have not been able to cleave super-coiled DNA on UV irradiation.     

Spectrophotometric analysis of iodide oxidation by chlorine in highly mineralized solutions

A spectrophotometric method for determining the concentrations of various iodine compounds (I⁻: initial compound, I₃⁻: under-oxidized iodine form, I₂ and I₂Cl⁻: target iodine forms and ICl₂⁻: over-oxidized iodine form) in their joint presence has been developed in order to study iodine processing from underground brines in Turkmenistan which are characterized by considerably higher mineralization and lower iodide content compared than those in Japan and USA. It was found that solutions with constant iodine concentrations and variable chloride concentrations had an isosbestic point at 474 nm with a molar absorbtivity of I₂ plus I₂Cl⁻ of 610.2 l mol⁻¹ cm⁻¹, while the absorbance of other iodine forms at this wavelength was negligible. This allowed us to use an absorbance at 474 nm for calculating the iodine concentration in solutions of variable chloride concentration. For calculating concentrations of other iodine compounds, absorbances at other wavelengths were used: 225 nm (I⁻ and ICl₂⁻), 248 nm (I₂Cl⁻) and 350 nm (I₃⁻). Beer’s law was valid for all iodine compounds in solutions with constant salt concentrations at all wavelengths. The authors have also developed a detailed algorithm for calculating the concentrations of the various iodine forms in their joint presence. The method was applied to solutions with various chloride concentrations and additions of microcomponents of natural solutions (bromide and iron ions, naphthenic acid and hydrogen sulfide). The overall precision for calculating the concentrations of various iodine compounds was <5% for solutions with an oxidant excess of <2-fold, and with chloride concentrations of <5 mol l⁻¹.     

Titanium (IV) complexes based on substituted 2-[(2-hydroxyethyl)]aminophenols

Novel substituted 2-[(2-hydroxyethyl)]aminophenols, MeN(CHR¹CR²R³OH)(C₆H₄-o-OH) (2-5), were synthesized by the reaction of 2-methylaminophenol with corresponding oxiranes. Titano-spiro-bis(ocanes) [MeN(CHR¹CR²R³O)(C₆H₄-o-O)]₂Ti 6-9 (2, 6, R¹ = H, R² = R³ = Me; 3, 7, R¹ = R² = Ph (treo-), R³ = H; 4, 8, R¹ = Ph, R² = R³ = H; 5, 9, R¹ = R² = H, R³ = Ph) based on [ONO]-ligands have been synthesized. The obtained compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analysis data. The complex [Ti(μ²-O){O-o-C₆H₄}{μ²-CMe₂CH₂}NMe]₆ (10) was obtained by controlled hydrolysis of 6. Molecular structure of 10 was determined by X-ray structure analysis.     

Ruthenium(II) carbonyl complexes of dehydroacetic acid thiosemicarbazone: Synthesis, structure, light emission and biological activity

The reaction of [RuHCl(CO)(B)(EPh₃)₂] (where E = As, B = AsPh₃; E = P, B = PPh₃, py, pip, or mor) and dehydroacetic acid thiosemicarbazone (abbreviated as H₂dhatsc where H₂ stands for the two dissociable protons) in benzene under reflux afford a series of new ruthenium(II) carbonyl complexes containing dehydroacetic acid thiosemicarbazone of general formula [Ru(dhatsc)(CO)(B)(EPh₃)] (where E = As, B = AsPh₃; E = P, B = PPh₃, py, pip or mor; dhatsc = dibasic tridentate dehydroacetic acid thiosemicarbazone). All the complexes have been characterized by elemental analyses, FT-IR, UV-Vis, and ¹H NMR spectral methods. The thiosemicarbazone of dehydroacetic acid behaves as dianionic tridentate O, N, S donor and coordinates to ruthenium via phenolic oxygen of dehydroacetic acid, the imine nitrogen of thiosemicarbazone and thiol sulfur. In chloroform solution, all the complexes exhibit metal-to-ligand charge transfer transitions (MLCT). The crystal structure of one of the complexes [Ru(dhatsc)(CO)(PPh₃)₂] (1) has been determined by single crystal X-ray diffraction which reveals the presence of a distorted octahedral geometry in the complexes. All the complexes exhibit an irreversible oxidation (Ru^III/Ru^II) in the range 0.76-0.89 V and an irreversible reduction (Ru^II/Ru^I) in the range −0.87 to −0.97 V. Further, the free ligand and its ruthenium complexes have been screened for their antibacterial and antifungal activities. The complexes show better activity in inhibiting the growth of bacteria Staphylococcus aureus and Escherichia coli and fungus Candida albicans and Aspergillus niger. These results made it desirable to delineate a comparison between free ligand and its ruthenium complexes.     

Structural and vibrational characterization of [KrF][AuF6] and α-[O2][AuF6] using single crystal X-ray diffraction, Raman spectroscopy and electron structure calculations

The salt [KrF][AuF₆] has been prepared by the direct oxidation of gold powder in anhydrous HF at 20 °C using the potent oxidative fluorinating agent KrF₂. The KrF⁺ salt readily oxidizes molecular oxygen at ambient temperature to yield [O₂][AuF₆]. Variable temperature Raman spectroscopy has been used to identify a reversible phase transition in [O₂][AuF₆], which occurs between −114 and −118 °C. Single crystal X-ray diffraction has been used to characterize the low-temperature, α-phase of [O₂][AuF₆]. The phase transition is attributed to ordering of the O₂⁺ cation in the crystal lattice, which is accompanied by minor distortions of the AuF₆⁻ anion. The α-phase of [O₂][AuF₆] crystallizes in the triclinic space group , with a=4.935(6) Å, b=4.980(6) Å, c=5.013(6) Å, α=101.18(1)°, β=90.75(2)°, γ=101.98(2)°, V=342.97 Å³, Z=1, and R₁=0.0481 at −122 °C. The structure of the precursor, [KrF][AuF₆], has also been determined by single crystal X-ray diffraction and crystallizes in the monoclinic space group Cc with a=7.992(3) Å, b=7.084(3) Å, c=10.721(4) Å, β=105.58(1)°, V=584.8(4) Å³, Z=4 and R₁=0.0389 at −125 °C. The KrF⁺ and AuF₆⁻ ions interact by means of a FKr---FAu fluorine bridge that is bent by 125.3(7)° about the bridge fluorine. The KrF_t and Kr---F_b bond lengths in [KrF][AuF₆] were determined to be 1.76(1) and 2.15(1) Å, respectively. The energy minimized structures of the [KrF][AuF₆] ion-pair and the AuF₆⁻ anion have been determined at the Hartree-Fock (HF), MP2 and local density functional (LDF) levels of theory. These calculations have also been used to assign the vibrational spectrum of the [KrF][AuF₆] ion-pair in greater detail and to reassign the vibrational spectrum of the AuF₆⁻ anion.     

Synthesis, structure and physical properties of the new uranium ternary phase U3Co2Ge7

A new ternary compound, U₃Co₂Ge₇, has been synthesized from the corresponding elements by a high temperature reaction using molten tin flux. It crystallizes in the orthorhombic La₃Co₂Sn₇-type (Pearson's symbol oC24, space group Cmmm, No. 65) with lattice parameters determined from single-crystal X-ray diffraction as follows: a=4.145(2) Å; b=24.920(7); c=4.136(2) Å, V=427.2(3) Å³. Structure refinements confirm an ordered structure having two crystallographically inequivalent uranium atoms, occupying sites with dissimilar coordination. U₃Co₂Ge₇ orders ferromagnetically below 40 K and undergoes a consecutive magnetic transition at 20 K. These results have been obtained from temperature- and field-dependent magnetization, resistivity and heat-capacity measurements. The estimated Sommerfeld coefficient γ=87 mJ/mol-U K² suggests U₃Co₂Ge₇ to be a moderately heavy-fermion material.