X-ray diffraction studies of diisotactic polymers of cis- and trans-2-butene oxides

Crystalline polymers derived from cis- and trans-2-butene oxides were studied by x-ray diffraction methods. X-ray fiber and powder photographs of poly(trans-2-butene oxide) were indexed by an orthorhombic unit cell with the dimensions a = 13.72 A., b = 4.60 A., and c (chain axis) = 6.90 A.; the space group is P2₁2₁2₁. The crystal structure of this polymer has been determined in projection. The chain has an erythro-diisotactic structure with -dl, dl- carbon sequences. The polymer has a nonplanar zigzag backbone with carbon and oxygen atoms of alternate monomer units lying nearly in a plane. Two chain molecules pass through the unit cell. The unit cell of poly(cis-2-butene oxide) is orthorhombic with lattice constants a = 11.20 A., b = 10.44 A., c (chain axis) = 7.01 A. The polymer has a threo-diisotactic structure with -dd,dd- or -ll,ll- carbon sequences. Four chain molecules pass through the unit cell. The crystal lattice is body-centered but the space group has not yet been established. The polymer has an almost fully extended zigzag chain configuration. Polymers prepared by either metal halide catalysts (FeCl₃, SnCl₄) or organometallic catalysts were essentially identical; the latter catalysts did, however, yield more highly crystalline polymers.     

Thermodynamic properties of simple alkenes

Employing low temperature thermal measurements, heat capacities (C_s) in the crystal and liquid states, and phase transition data, T_m and ΔH_m, the condensed phase thermodynamic properties, (G_s -H°₀)/T, H_s -H°₀, S_s and C_s, in the temperature range 0–360 K were evaluated for the following eleven alkenes: ethylene, propylene, 1-butene, cis-2-butene, trans-2-butene, 1-pentene, cis-2-pentene, trans-2-pentene, 2-methyl-1-butene, 3-methyl-1-butene and 2-methyl-2-butene. The sources of experimental data, methods of evaluation, and the calculated results are described in detail.     

Synthesis and Structure of 2,3-Bis(5-tert-butyl-2-methoxyphenyl)buta-1,3-diene by Bromine Elimination of (Z)-1,4-Dibromo-2,3-bis(5-tert-butyl-2-methoxyphenyl)-2-butene

2,3-Bis(5-tert-butyl-2-methoxyphenyl)buta-1,3-diene was prepared by bromination of (Z)- and (E)-2,3-bis(5-tert-butyl-2-methoxyphenyl)-2-butene followed by treatment with zinc powder in a mixture of CH₂Cl₂ and acetic acid, which was converted to the corresponding o-terphenyl skeleton by the condensation with dimethyl acetylenedicarboxylate followed by oxidation with 2,3-dichloro-5,6-dicyanobenzoquinone.     

Conformational energies and rotational barriers in 3-methyl-1-butene and 1-butene: An ab initio and molecular mechanics study

The calculated result obtained with MM2(87) for the rotation of the isopropyl group in 3-methyl-1-butene is not in agreement with experimental data. In order to reparametrize the C_sp2-C_sp3-C_sp-C_sp3 torsional angle, 3-methyl-1-butene and 1-butene have been studied by molecular mechanics (MM2(87)) and ab initio (MP2/6-31G* and MP3/6-31G*) calculations. The reparametrization of the torsional angle gives calculated results from MM2(87) in agreement with experimental data and ab initio calculations for both 3-methyl-1-butene and 1-butene. The calculated barriers for the rotation of alkyl groups in alkylbenzenes are improved with these new parameters.     

Die absolute Konfiguration von 1-2H1-Äthanol

(S)-l-²H₁-Ethanol (6) has been prepared in three steps from (–)-erythro-(2R,3S)-3-²H₁-butan-2-ol (2) , itself available from cis-butene by asymmetric hydroboration. In enzymatic tests with yeast alcohol dehydrogenase this deuterated ethanol proved to be indistinguishable from the laevorotatory isomer. This establishes the (S)-chirality of the latter and at the same time defines the stereospecificity of the yeast alcohol dehydrogenase.     

A kinetic study of the chemistry of the SO2 (3B1) reactions with cis- and trans-2-butene

The chemical reactions of SO₂(³B₁) molecules with cis- and trans-2-butene have been studied in gaseous mixtures at 25°C by excitation of SO₂ within the SO₂(³B₁) → SO₂(+, ¹A₁) ‘forbidden’ band using 3500–4100-Å light. The initial quatum yields of olefin isomerization were determined as a function of the [SO₂]/[2-butene] ratio and added gases, He and O₂. The kinetic treatment of these data suggests that there is formed in the SO₂(³B₁) quenching step with either cis- or trans-2-butene, some common intermediate, probably a triplet addition complex between SO- and olefin. It decomposes very rapidly to form the 2-butene isomers in the ratio [trans-2-butene]/[cis-2-butene] = 1.8. In another series of experiments SO₂ was excited using a 3630 ± 1-Å laser pulse of short duration, and the SO₂(³B₁) quenching rate constants with the 2-butenes were determined from the SO₂(³B₁) lifetime measurements. The rate constants at 21°C are (1.29 ± 0.18) × 10¹¹ and (1.22 ± 0.15) × 10¹¹ l/mole·sec with cis-2-butene and trans-2-butene, respectively, as the quencher molecule. Within the experimental error these quenching constants equal those derived from the quantum yield data. Thus the rate-determining step in the isomerization reaction is suggested to be the quenching reaction, presumably the formation of the triplet SO₂-2-butene addition complex. In a third series of experiments using light scattering measurements, it was found that the aerosol formation probably originates largely from SO₃ and H₂SO₄ mist formed following the reaction SO₂(³B₁) + SO₂ → SO₃ + SO(³Σ^?). Aerosol formation from photochemically excited SO₂-olefin interaction is probably unimportant in these systems and must be unimportant in the atmosphere.     

Monomer-isomerization polymerization. XI. Monomer-isomerization copolymerizations of 2-butene with 2-pentene and 2-hexene with Ziegler-Natta catalyst

2-Pentene and 2-hexene were found to undergo monomer-isomerization copolymerizations with 2-butene by Al(C₂H₅)₃–VCl₃ and Al(C₂H₅)₃–TiCl₃ catalysts in the presence of nickel dimethylglyoxime or transition metal acetylacetonates to yield copolymers consisting of the respective 1-olefin units. For comparison, the copolymerizations of 1-pentene with 1-butene and 1-hexene with 1-butene by Al(C₂H₅)₃–VCl₃ catalyst were also attempted. The compositions of the copolymers obtained from these copolymerizations were determined by using the calibration curves between the compositions of the respective homopolymer mixtures and the values of D₇₆₆/D₁₃₈₀ in the infrared spectra. The monomer reactivity ratios for the monomer-isomerization copolymerizations of 2-butene (M₁) with 2-pentene and 2-hexene, in which the concentrations of both 1-olefins calculated from the observed isomer distribution were used as those in the monomer feed mixture, and for the ordinary copolymerizations of 1-butene (M₁) with 1-pentene and 1-hexene by Al(C₂H₅)₃-VCl₃ catalyst were determined as follows: 2-butene (M₁)/2-pentene (M₂): r₁ = 0.14, r₂ = 0.99; 1-butene (M₁)/1-pentene (M₂): r₁ = 0.30, r₂ = 0.74; 2-butene (M₁)/2-hexene (M₂): r₁ = 0.11, r₂ = 0.62; 1-butene (M₁)/1-hexene (M₂): r₁ = 0.13, r₂ = 0.90.     

Stereochemistry of the Platinum Catalyzed Hydroformylation of Olefins

The deuterioformylation of (Z)- or (E)-2-butene catalyzed by [DIOP]Pt(SnCl₃)-Cl

1 DIOP=2,3-O-isopropylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)butane.

gives predominantly erythro- or threo-1,3-[²H]₂-2-methylbutanal respectively. Hence, hydroformylation by this catalytic system must take place with cis-stereochemistry.     

Copolymerization of ethylene and 1-butene using a Cr—silica catalyst in a slurry reactor

A novel slurry reactor was used to investigate the copolymerization behavior of ethylene and 1-butene in the presence of 1 wt % Cr on Davison silica (Phillips-type) catalyst over the temperature range of 0–50°C, space velocity of about 0.0051 [m³ (STP)]/(g of catalyst) h, and a fixed ethylene to 1-butene feed mole ratio of 95 : 5. The effect of varying the ethylene to 1-butene feed ratios, 100 : 0, 96.5 : 3.5, 95 : 5, 93 : 7, 90 : 10, 80 : 20, and 0 : 100 mol/mol at 50°C was also studied. The addition of 1-butene to ethylene typically increased both copolymerization rates and yields relative to ethylene homopolymerization with the same catalyst, reaching a maximum yield for an ethylene: 1-butene feed ratio of 95 : 5 at 50°C. The incorporation of 1-butene within the copolymer in all cases was less than 5 mol %. The average activation energy for the apparent reaction rate constant, k_a, based on total comonomer mole fraction in the slurry liquid for the ethylene to 1-butene feed mole ratio of 95 : 5 in the temperature range of 50–30°C measured 54.2 kJ/mol. The behavior for temperatures between 30 to 0°C differed with an activation energy of 98.2 kJ/mol; thus, some diffusion limitation likely influences the copolymerization rates at temperatures above 30°C. A kinetics analysis of the experimental data at 50°C for different ethylene to 1-butene feed ratios gave the values of the reactivity ratios, r₁ = 27.3 ± 3.6 and r₂ ≅ 0, for ethylene and 1-butene, respectively. © 1996 John Wiley & Sons, Inc.     

Sorption,diffusion, and partial molar volumes of C4 hydrocarbons in rubbery polymers

Sorption and dilation isotherms and diffusion coefficients for seven hydrocarbons (n-butane, isobutane, 1-butene, cis-2-butene, trans-2-butene, isobutylene, and 1,3-butadiene) in two rubbery polymers, 1,2-polybutadiene (PB) and poly(ethylene-co-vinyl acetate) (EVAc), were measured at 25°C. Dissolution parameters (Henry's law coefficient and Flory-Huggins interaction parameter), partial molar volumes, and diffusion coefficients were determined. PB exhibited greater affinity and lower diffusivity than EVAc to the C₄ gases, although the gases showed nearly the same partial molar volumes in the two polymers. The diffusivity of such elongated molecules as trans-2-butene in both polymers was higher than that of bulky molecules with similar partial molar volume, such as cis-2-butene and isobutylene. Pressure-dependent permeabilities of PB and EVAc films to the hydrocarbons were predicted and discussed based on the dissolution parameters and the diffusivities. © 1995 John Wiley & Sons, Inc.     

Temperature dependence of the rate constants of the reactions of oxygen atoms with trans-2-butene,cis-2-butene, 2-methylpropene, 2-methyl-2-butene,and 2,3-dimethyl-2-butene

The kinetics of the reactions of ground state oxygen atoms with trans-2-butene, cis-2-butene, 2-methylpropene, 2-methyl-2-butene, and 2,3-dimethyl-2-butene was investigated in the temperature range 200 to 370K. In this range, the rate constants are (in units 10^?11 cm³ s^?1): (1.1 ± 0.1) exp[+(180 ± 24)K/T]; (0.98 ± 0.09) exp[+(149 ± 23)K/T]; (1.14 ± 0.13) exp[+(128 ± 33)K/T]; (2.34 ± 0.16) exp[+(250 ± 16)K/T]; and (3.31 ± 0.50) exp[+(257 ± 36)K/T], respectively. The atoms were generated by the H₂ laser photolysis of NO and detected by the time resolved chemiluminescence in the presence of NO. The concentrations of the O(³P) atoms were kept so low that secondary reactions with products are unimportant. © 1995 John Wiley & Sons, Inc.     

Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Nickel-catalyzed polymerization of a substituted sulfoxonium ylide

The homopolymerization of (dimethylamino)phenylsulfoxonium ethylide, a substituted sulfoxonium ylide, is reported. Treatment of the monomer with a readily available Ni(II) catalyst afforded poly[(1-butene)-ran-(2-butene)-ran-(ethylene)] in good yield and high molecular weight. Varying the initial monomer-to-catalyst feed ratio enabled control over the molecular weights of the polymers produced. The polymerization mechanism appears to proceed in a chain growth fashion that entails the addition of ethylide units to growing polymer chains in conjunction with the expulsion of (dimethylamino)phenyl sulfoxide as a byproduct.     

Production of 1,3-Butadiene From C4 Raffinate-3 Through Oxidative Dehydrogenation of n-Butene Over Bismuth Molybdate Catalysts

Recent progress on the bismuth molybdate catalysts for oxidative dehydrogenation of n-butene to 1,3-butadiene was reported in this review. A number of bismuth molybdate catalysts, including pure bismuth molybdates (α-Bi₂Mo₃O₁₂, β-Bi₂Mo₂O₉, and γ-Bi₂MoO₆) and multicomponent bismuth molybdates, were prepared by a co-precipitation method for use in the production of 1,3-butadiene from C₄ raffinate-3 through oxidative dehydrogenation of n-butene. It was observed that multicomponent bismuth molybdate catalyst was more efficient than pure bismuth molybdate catalyst in the oxidative dehydrogenation of n-butene. Various experimental measurements such as temperature-programmed reoxidation, X-ray photoelectron spectroscopy, and O₂-temperature-programmed desorption analyses were carried out to elucidate the different catalytic activity of bismuth molybdate catalysts. It was revealed that a bismuth molybdate catalyst with a higher oxygen mobility showed a better catalytic performance in terms of conversion of n-butene and yield for 1,3-butadiene. We have successfully demonstrated from experimental findings that oxygen mobility of bismuth molybdate catalyst played a key role in determining the catalytic performance in the oxidative dehydrogenation of n-butene to 1,3-butadiene.     

Formation yields of epoxides and O(3P) atoms from the gas-phase reactions of O3 with a series of alkenes

Reactions of ozone with propene, 1-butene, cis-2-butene, trans-2-butene, 2,3-dimethyl-2-butene, and 1,3-butadiene were carried out in N₂ and air diluent at atmospheric pressure and room temperature and, by monitoring the formation of the epoxides and/or a carbonyl compound formed from the reactions of O(³P) atoms with these alkenes, the formation yields of O(³P) atoms from the O₃ reactions were investigated. No evidence for O(³P) atom formation was obtained, and upper limits to O(³P) atom formation yields of <4% for propene, <5% for 1.3-butadiene, and <2% for the other four alkenes were derived. The reaction of O₃ with 1,3-butadiene led to the direct formation of 3,4-epoxy-1-butene in (2.3 ± 0.4)% yield. These data are in agreement with the majority of the literature data and show that O(³P) atom formation is not a significant pathway in O₃—alkene reactions, and that epoxide formation only occurs to any significant extent from conjugated dienes. © 1994 John Wiley & Sons, Inc.     

Reaction of atomic oxygen with cyclopentadiene

The reaction of 1,3-cyclopentadiene (CPD) with ground-state atomic oxygen O(³P), produced by mercury photosensitized decomposition of nitrous oxide, was studied. The identified products were carbon monoxide and the following C₄H₆ isomers: 3-methylcyclopropene, 1,3-butadiene, 1,2-butadiene, and 1-butyne. The yield of carbon monoxide over oxygen atoms produced (?_CO) was equal to the sum of the yields of C₄H₆ isomers in any experiment. ?_CO was 0.43 at the total pressure of 6.5 torr and 0.20 at 500 torr. We did not succeed in detecting any addition products such as C₅H₆O isomers. It was found that 3-methylcyclopropene was produced with excess energy and was partly isomerized to other C₄H₆ isomers, especially to 1-butyne. The excess energy was estimated to be about 50 kcal/mol. The rate coefficient of the reaction was obtained relative to those for the reactions of atomic oxygen with trans-2-butene and 1-butene. The ratios k_CPD+O/k_{trans-2-butene+O}= 2.34 and k_CPD+O/k_1-butene+O = 11.3 were obtained. Probable reaction mechanisms and intermediates are suggested.     

Conformational isomerism of 1-butene secondary ozonide as studied by means of matrix isolation infrared absorption spectroscopy

Theoretical calculations of structures, stability and vibrational spectra of 1-butene secondary ozonide (SOZ) conformers were performed using DFT method B3LYP with a 6-311++G(3df, 3pd) basis set. The calculations predict six staggered structures of 1-butene SOZ. The FTIR spectra of 1-butene SOZ isolated in Ar, N₂ and Xe matrices were recorded. It was found that nitrogen is the best suited for the matrix isolation of 1-butene SOZ. The bandwidth of the spectral bands of the ozonide isolated in nitrogen was as narrow as 2 cm⁻¹. For the first time the existence of five conformers of 1-butene SOZ were confirmed experimentally by means of matrix isolation infrared absorption spectroscopy. The equatorial gauche (∠OCCC=−66.1°) conformer was proved theoretically and experimentally to be the most stable. It was found that due to high potential barriers of the conformational transitions annealing of the matrix is useless for the assignment of spectral bands to various conformers of 1-butene SOZ. Using the hot nozzle technique the van’t Hoff experimental plots were made for three additional conformers of 1-butene SOZ and experimental ΔH values for these additional conformers were established. The crystallization problems of 1-butene SOZ are discussed which accounts for the rich conformational diversity of the ozonide as well as high conformational barriers for axial-equatorial transitions.      

Monomer-isomerization polymerization. XIX. Monomer-isomerization copolymerizations of methylbutenes and 2-butene with Ziegler-Natta catalyst

The copolymerization of 3-methyl-1-butene (3M1B), 2-methyl-2-butene (2M2B), or 2-methyl-1-butene (2M1B) with trans-2-butene (2B) was attempted in the presence of a Ziegler-Natta catalyst. It was found the 3M1B underwent monomer-isomerization copolymerization with 2B to give a copolymer consisting of both 3M1B and 1-butene (1B) units, with an infrared (IR) spectrum in good agreement with that obtained from the copolymerization of 3M1B with 1B under similar conditions. When the apparent copolymerization parameters obtained by a TiCl₃–(C₂H₅)₃Al catalyst were compared, the apparent reactivity of 3M1B observed in the 3M1B-2B system was much higher than that in the 3M1B-1B system. However, 2M2B and 2M1B did not undergo monomer-isomerization copolymerization with 2B, and only the homopolymer of 1B was obtained under similar conditions.     

Niederdruck-Oligomerisation von Mono-Olefinen mit löslichen Nickel/Aluminium-Bimetallkatalysatoren Teil III. Reaktionskinetische Untersuchungen über die Dimerisation und Trimerisation des Áthylens

The kinetics of the di- and trimerization of ethylen in organic solvents under the influence of a homogeneous catalyst containing π-tetramethylcyclobutadiene-nickeldichloride and a prereacted mixture of ethylaluminiumdichloride and tri-n-butylphosphine are reported. The primary reaction product is 1-butene, which is isomerized to 2-butene (cis/trans) during the reaction. The C₆-Olefins are formed by the reaction of ethylene with 1-butene and with the 2-butenes. The following primary reaction products are obtained: 3-hexene (cis/trans), 1-hexene, 2-ethyl-1-butene, 3-methyl-1-pentene and 3-methyl-2-pentene (cis/trans). The effect of other phosphines on the reaction was also studied. The relative composition of the reaction product is strongly dependent upon the amount and the LEWIS base strength of the phosphine present. The results are in accordance with a coordinative mechanism on nickel.     

Reactions of unsymmetrically substituted allyl radicals with methyl radicals

The Hg(6³P₁) photosensitized decompositions of 3-methyl-1-butene, 2-methyl-2-butene, 3,3-dimethyl-1-butene, and 2,3-dimethyl-1-butene have been used to generate 1-methylallyl, 1,2-dimethylallyl, 1,1-dimethylallyl, and 1,1,2-trimethylallyl radicals in the gas phase at 24 ± 1°C. From a study of the relative yields of the CH₃ combination products, the relative reactivities of the reaction centers in each of these unsymmetrically substituted ambident radicals have been determined. The more substituted centers are found to be the less reactive, and this is ascribed primarily to greater steric interaction at these centers during reaction. Measurement of the ratio of trans- to cis-2-pentene formed from the 1-methylallyl radical, combined with published values for this ratio at higher temperatures, enabled the differences in entropy and heat of formation of the trans- and cis-forms of this radical to be calculated as 0.62 ± 0.85 J mol^?1 K^?1 and - 0.63 ± 0.25 kJ mol^?1, respectively, at 298K. Approximate values of the disproportionation/combination ratios for reaction of CH₃ with 1,1-dimethylallyl and 1-methylallyl have been estimated and used to compute rate constants for the recombinations of tert-butyl and isopropyl radicals that are in agreement with recently published data.