Symmetries of boundary layer equations of power-law fluids of second grade

A modified power-law fluid of second grade is considered. The model is a combination of power-law and second grade fluid in which the fluid may exhibit normal stresses, shear thinning or shear thickening behaviors. The equations of motion are derived for two dimensional incompressible flows, and from which the boundary layer equations are derived. Symmetries of the boundary layer equations are found by using Lie group theory, and then group classification with respect to power-law index is performed. By using one of the symmetries, namely the scaling symmetry, the partial differential system is transformed into an ordinary differential system, which is numerically integrated under the classical boundary layer conditions. Effects of power-law index and second grade coefficient on the boundary layers are shown and solutions are contrasted with the usual second grade fluid solutions.     

Similarity Solution of Unsteady Boundary Layer Equations with a Magnetic Field

The unsteady laminar incompressible boundary layer flow of an electricallyconducting fluid in the stagnation region of two-dimensional and axisymmetricbodies with an applied magnetic field has been studied. The boundary layerequations which are parabolic partial differential equations with threeindependent variables have been reduced to a system of ordinary differential equations by using suitable transformations and then solved numerically using a shooting method. Here, we have obtained new solutions which are solutions of both the boundary layer and Navier-Stokes equations.     

An extended study of the hydrodynamics of gravity-driven film flow of power-law fluids

A new similarity transformation has been devised for extensive studies of accelerating non-Newtonian film flow. The partial differential equations governing the hydrodynamics of the flow of a power-law fluid down along an inclined plane surface are transformed into a set of two ordinary differential equations by means of the dimensionless velocity component approach. Although the analysis is applicable for any angle of inclination (0<π/2), the resulting one-parameter problem involves only the power-law index n. Nevertheless, physically essential quantities, like the velocity components and the skin-friction coefficient, do depend on and relevant relationships are deduced between the vertical and inclined cases. Accurate numerical similarity solutions are provided for n in the range from 0.1 to 2.0. The present method enables solutions to be obtained also for highly pseudo-plastic films, i.e. for n below 0.5. The mass flow rate entrained into the momentum boundary layer from the inviscid freestream is expressed in terms of a dimensionless mass flux parameter Φ, which depends on the dimensionless boundary layer thickness and the velocity components at the edge of the viscous boundary layer. Φ, which is thus an integral part of the similarity solution, turns out to decrease monotonically with n. This parameter is of particular relevance in the determination of the streamwise position at which the entire freestream has been entrained and viscous stresses prevail all the way to the free surface of the film. A short-cut method to facilitate rapid and yet accurate estimates of the mass flux parameter is developed to this end.     

Transonic viscous-inviscid interaction by a finite element method

A method is outlined for solving two-dimensional transonic viscous flow problems, in which the velocity vector is split into the gradient of a potential and a rotational component. The approach takes advantage of the fact that for high-Reynolds-number flows the viscous terms of the Navier-Stokes equations are important only in a thin shear layer and therefore solution of the full equations may not be needed everywhere. Most of the flow can be considered inviscid and, neglecting the entropy and vorticity effects, a potential model is a good approximation in the flow core. The rotational part of the flow can then be calculated by solution of the potential, streamfunction and vorticity transport equations. Implementation of the no-slip and no-penetration boundary conditions at the walls provides a simple mechanism for the interaction between the viscous and inviscid solutions and no extra coupling procedures are needed. Results are presented for turbulent transonic internal choked flows.     

Heat and mass transfer by natural convection at a stagnation point in a porous medium considering Soret and Dufour effects

Dufour and Soret effects on flow at a stagnation point in a fluid-saturated porous medium are studied in this paper. A two dimensional stagnation-point flow with suction/injection of a Darcian fluid is considered. By using an appropriate similarity transformation, the boundary layer equations of momentum, energy and concentration are reduced to a set of ordinary differential equations, which are solved numerically using the Keller-box method, which is a very efficient finite differences technique. Nusselt and Sherwood numbers are obtained, together with the velocity, temperature and concentration profiles in the boundary layer. For the large suction case, asymptotic analytical solutions of the problem are obtained, which compare favourably with the numerical solutions. A critical view of the problem is presented finally.     

Flow and heat transfer of an electrically conducting third grade fluid past an infinite plate with partial slip

The effects of partial slip on the steady flow and heat transfer of an electrically conducting, incompressible, third grade fluid past a horizontal plate subject to uniform suction and blowing is investigated. Two distinct heat transfer problems are studied. In the first case, the plate is assumed to be at a higher temperature than the fluid; and in the second case, the plate is assumed to be insulated. The momentum equation is characterized by a highly nonlinear boundary value problem in which the order of the differential equation exceeds the number of available boundary conditions. Numerical solutions for the governing nonlinear equations are obtained over the entire range of physical parameters. The effects of slip, magnetic parameter, non-Newtonian fluid characteristics on the velocity and temperature fields are discussed in detail and shown graphically. It is interesting to find that the velocity and the thermal boundary layers decrease with an increase in the slip, and as the slip increases to infinity, the flow behaves as though it were inviscid.     

Mixed convection boundary layer flow of a viscoelastic fluid over a horizontal circular cylinder

The steady mixed convection boundary layer flow of a viscoelastic fluid over a horizontal circular cylinder in a stream flowing vertically upwards is numerically studied for both cases of heated and cooled cylinders. The governing partial differential equations are transformed into dimensionless forms using an appropriate transformation and then solved numerically using the Keller-box method. The comparison between the solutions obtained and those for a Newtonian fluid is found to be very good. Effects of the mixed convection and elasticity parameters on the skin friction and heat transfer coefficients for a fluid having the Prandtl number equal to one are also discussed. It is found that for some values of the viscoelastic parameter and some negative values of the mixed convection parameter (opposing flow) the boundary layer separates from the cylinder. Heating the cylinder delays separation and can, if the cylinder is warm enough, suppress the separation completely. Similar to the case of a Newtonian fluid, cooling the cylinder brings the separation point nearer to the lower stagnation point. However, for a sufficiently cold cylinder there will not be a boundary layer.     

Heat and mass transfer on a MHD third grade fluid with partial slip flow past an infinite vertical insulated porous plate in a porous medium

The influence of third grade, partial slip and other thermophysical parameters on the steady flow, heat and mass transfer of viscoelastic third grade fluid past an infinite vertical insulated plate subject to suction across the boundary layer has been investigated. The space occupying the fluid is porous. The momentum equation is characterized by a highly nonlinear boundary value problem in which the order of the differential equation exceeds the number of available boundary conditions. An efficient numerical scheme of midpoint technique with Richardson’s extrapolation is employed to solve the governing system of coupled nonlinear equations of momentum, energy and concentration. Numerical calculations were carried out for different values of various interesting non-dimensional quantities in the slip flow regime with heat and mass transfer and were shown with the aid of figures. The values of the wall shear stress, the local rate of heat and mass transfers were obtained and tabulated. The analysis shows that as the fluid becomes more shear thickening, the momentum boundary layer decreases but the thermal boundary layer increases; the magnetic field strength is found to decrease with an increasing temperature distribution when the porous plate is insulated. The consequences of increasing the permeability parameter and Schmidt number decrease both the momentum and concentration boundary layer thicknesses respectively whereas an increase in the thermal Grashof number gives rise to the thermal boundary layer thickness.     

Analytical solution to stagnation-point flow and heat transfer over a stretching sheet based on homotopy analysis

This paper is concerned with two-dimensional stagnation-point steady flow of an incompressible viscous fluid towards a stretching sheet whose velocity is proportional to the distance from the slit. The governing system of partial differential equations is first transformed into a system of dimensionless ordinary differential equations. Analytical solutions of the velocity distribution and dimensionless temperature profiles are obtained for different ratios of free stream velocity and stretching velocity, Prandtl number, Eckert number and dimensionality index in series forms using homotopy analysis method（HAM）. It is shown that a boundary layer is formed when the free stream velocity exceeds the stretching velocity, and an inverted boundary layer is formed when the free stream velocity is less than the stretching velocity. Graphs are presented to show the effects of different parameters.     

Axisymmetric flow and heat transfer of the Carreau fluid due to a radially stretching sheet: Numerical study

The prime objective of this article is to study the axisymmetric flow and heat transfer of the Carreau fluid over a radially stretching sheet. The Carreau constitutive model is used to discuss the characteristics of both shear-thinning and shear-thickening fluids. The momentum equations for the two-dimensional flow field are first modeled for the Carreau fluid with the aid of the boundary layer approximations. The essential equations of the problem are reduced to a set of nonlinear ordinary differential equations by using local similarity transformations. Numerical solutions of the governing differential equations are obtained for the velocity and temperature fields by using the fifth-order Runge–Kutta method along with the shooting technique. These solutions are obtained for various values of physical parameters. The results indicate substantial reduction of the flow velocity as well as the thermal boundary layer thickness for the shear-thinning fluid with an increase in the Weissenberg number, and the opposite behavior is noted for the shear-thickening fluid. Numerical results are validated by comparisons with already published results.     

Viscoelastic MHD flow boundary layer over a stretching surface with viscous and ohmic dissipations

In this study the momentum and heat transfer characteristics in an incompressible electrically conducting viscoelastic boundary layer fluid flow over a linear stretching sheet are considered. Highly non-linear momentum and thermal boundary layer equations are reduced to set of nonlinear ordinary differential equations by appropriate transformation.     

MHD effect of mixed convection boundary-layer flow of Powell-Eyring fluid past nonlinear stretching surface

Sufficient conditions are found for the existence of similar solutions of the mixed convection flow of a Powell-Eyring fluid over a nonlinear stretching permeable sur- face in the presence of magnetic field. To achieve this, one parameter linear group trans- formation is applied. The governing momentum and energy equations are transformed to nonlinear ordinary differential equations by use of a similarity transformation. These equations are solved by the homotopy analysis method （HAM） to obtain the approximate solutions. The effects of magnetic field, suction, and buoyancy on the Powell-Eyring fluid flow with heat transfer inside the boundary layer are analyzed. The effects of the non- Newtonian fluid （Powell-Eyring model） parameters ε and δon the skin friction and local heat transfer coefficients for the cases of aiding and opposite flows are investigated and discussed. It is observed that the momentum boundary layer thickness increases and the thermal boundary layer thickness decreases with the increase in ε whereas the momentum boundary layer thickness decreases and thermal boundary layer thickness increases with the increase in δ for both the aiding and opposing mixed convection flows.     

流固耦合介质轴对称动力问题解法的改进

用直接求解常微分方程组解文［１］所得的控制方程，减少了传递矩阵计算工作量，避免了子阵求逆，使问题的求解得到了简化     

The axisymmetrical free laminar jet of an incompressible pseudoplastic fluid

Summary The equations of momentum and continuity of a free, axisymmetrical jet for an incompressible, inelastic, non-Newtonian fluid in isothermal flow are solved. Using the boundary layer approximations and a similarity transformation the resulting non-linear third order ordinary differential equation is solved numerically. Velocity profiles are obtained and compared to previously known solutions for the two-dimensional jet. The significance of the results is discussed in detail.At present on leave at the Department of Chemical Engineering, Stanford University, Stanford (Cal.), U.S.A.     

Impact of thermal radiation on MHD slip flow over a flat plate with variable fluid properties

The influence of partial slip, thermal radiation and temperature dependent fluid properties on the hydro-magnetic fluid flow and heat transfer over a flat plate with convective surface heat flux at the boundary and non-uniform heat source/sink is studied. The transverse magnetic field is assumed as a function of the distance from the origin. Also it is assumed that the fluid viscosity and the thermal conductivity vary as an inverse function and linear function of temperature respectively. Using the similarity transformation, the governing system of non-linear partial differential equations are transformed into similarity non-linear ordinary differential equations and are solved numerically using symbolic software MATHEMATICA 7.0. The numerical values obtained within the boundary layer for the dimensionless velocity, temperature, skin friction coefficient and the Nusselt number are presented through graphs and tables for several sets of values of the parameters. The effects of various physical parameters on the flow and heat transfer characteristics are discussed from the physical point of view.     

Analytical study of heat transfer and boundary layer flow with suction and injection

The Governing Principle of Dissipative Processes (GPDP) formulated by Gyarmati into non-equilibrium thermodynamics is employed to study the effects of heat transfer, two dimensional, laminar and constant property fluid flow in the boundary layer with suction and injection. The flow and temperature fields inside the boundary layer are approximated by simple third degree polynomial functions and the variational principle is formulated over the region of the boundary layer. The Euler–Lagrange equations of the principle are obtained as polynomial equations in terms of momentum and thermal layer thicknesses. These equations are solvable for any given values of Prandtl number Pr, wedge angle parameter m and suction/injection parameter H. The obtained analytical solutions are compared with known numerical solutions and the comparison shows the fact that the accuracy is remarkable.     

Effects of variable fluid viscosity on flow past a heated stretching sheet embedded in a porous medium in presence of heat source/sink

The boundary layer flow and heat transfer of a fluid through a porous medium towards a stretching sheet in presence of heat generation or absorption is considered in this analysis. Fluid viscosity is assumed to vary as a linear function of temperature. The symmetry groups admitted by the corresponding boundary value problem are obtained by using a special form of Lie group transformations viz. scaling group of transformations. These transformations are used to convert the partial differential equations corresponding to the momentum and the energy equations into highly non-linear ordinary differential equations. Numerical solutions of these equations are obtained by shooting method. It is found that the horizontal velocity decreases with increasing temperature-dependent fluid viscosity parameter up to the crossing-over point but increases after that point and the temperature decreases in this case. With the increase of permeability parameter of the porous medium the fluid velocity decreases but the temperature increases at a particular point of the sheet. Effects of Prandtl number on the velocity boundary layer and on the thermal boundary layer are studied and plotted.     

Radiation effects on combined convection over a vertical flat plate embedded in a porous medium of variable porosity

The present paper is concerned with the study of radiation effects on the combined (forced-free) convection flow of an optically dense viscous incompressible fluid over a vertical surface embedded in a fluid saturated porous medium of variable porosity with heat generation or absorption. The effects of radiation heat transfer from a porous wall on convection flow are very important in high temperature processes. The inclusion of radiation effects in the energy equation leads to a highly non-linear partial differential equations which are transformed to a system of ordinary differential equations using non-similarity transformation. These equations are then solved numerically using implicit finite-difference method subject to appropriate boundary and matching conditions. A parametric study of the physical parameters such as the particle diameter-based Reynolds number, the flow based Reynolds number, the Grashof number, the heat generation or absorption co-efficient and radiation parameter is conducted on temperature distribution. The effects of radiation and other physical parameters on the local skin friction and on local Nusselt number are shown graphically. It is interesting to observe that the momentum and thermal boundary layer thickness increases with the radiation and decrease with increase in the Prandtl number.     

Three-dimensional gas flow in a rotating cylinder with a retarding cover

The study of rotating flows is of interest due to both the development of the centrifugal method of separation of gas and isotope mixtures and the possibility of astrophysical applications. An analytical nonlinear model for calculating the hydrodynamic characteristics of the viscous incompressible fluid flow in a rotating cylinder in the presence of a retarding cover is presented. The cases of stationary and rotating covers are considered. The analysis is performed on the basis of the system of hydrodynamic Navier-Stokes equations. The flow domain is divided up into the main flow and end boundary layers at the cylinder bottom and at the rotating cover. In its turn, the main flow is divided up into an inviscid quasi-rigid core and a lateral layer within which almost the entire upward circulatory flow is concentrated. The equations of the boundary layers at the end surfaces are analyzed by the approximate Slezkin-Targ method. The solutions in the boundary and lateral layers are “stitched” together with the velocity distribution in the main flow core. The unknown angular velocity ω ₁ and radial boundary R ₁ of the core are determined from the balance of the moments of the friction forces acting on the main rotating flow and the continuity condition for the circulatory flow. The experimental and calculated data are compared.     

A Legendre wavelet spectral collocation technique resolving anomalies associated with velocity in some boundary layer flows of Walter-B liquid

A Legendre wavelet spectral collocation method is proposed here to solve three boundary layer flow problems of Walter-B fluid namely the stagnation point flow, Blasius flow and Sakiadis flow. In the proposed method, we first transform the boundary value problems into initial value problems using shooting method. We then split the semi infinite domain into subintervals and the governing initial value problems are transformed to system of algebraic equations in each subinterval. The solutions of these algebraic equations yield an approximate solution of the differential equation in each subinterval. The overshoot in the velocity profile associated with the stagnation point and Blasius flows and undershoot in the Sakiadis flow is controlled. Physically realistic solutions are presented for both weakly and strongly viscoelastic parameters. The residual error validates the correctness, convergence and accuracy of the obtained solutions.