Relationship between short- and long-range orders in nonstoichiometric titanium monoxide (TiO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>)

The relationship between the short- and long-range orders in various phases of nonstoichiometric titanium monoxide (TiO _y ) has been analyzed for the first time. The types of the local environment of lattice sites in the metal and nonmetal (oxygen) sublattices of Ti₅O₅, Ti₃O₂, Ti₂O₃, and Ti₄O₅ superstructures are described. It is established that, in phases where ordering takes place simultaneously in both sublattices, all parameters of the superstructural short-range order determining the positions of atoms and vacancies in the first three coordination spheres can be uniquely expressed via the long-range order parameters. If the ordering takes place only in one sublattice, then five of the six short-range order parameters vanish. It is shown that, using data on the maximum absolute values of six short-range order parameters and on the fractions of occupied atomic positions in titanium and oxygen sublattices, it is possible to predict the type of ordered phase expected to form in the nonstoichiometric titanium monoxide TiO _y .     

Atomic displacements in the V<Subscript>52</Subscript>O<Subscript>64</Subscript> superstructure and the short-range order in superstoichiometric cubic VO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> vanadium monoxide with metal vacancies

Atomic displacements in the lattice of the tetragonal V₅₂O₆₄ superstructure have been experimentally determined. It has been found that atomic displacement waves, which are attributed to the formation of the short-range displacement order, appear in the vanadium and oxygen sublattices of this superstructure. It has been shown that the V₅₂O₆₄ superstructure is formed on the basis of disordered superstoichiometric cubic vanadium monoxide with the short-range order in the metallic sublattice. The character of the short-range order is such that vanadium atoms occupying tetrahedral positions are in the environment of four vacant sites of the vanadium sublattice. This means that the superstoichiometric VO_>1.0 vanadium monoxide has a cubic structure differing from the B1-type structure characteristic of most of the strongly nonstoichiometric cubic compounds MX _y (X = C, N, O) of transition metals.     

Effect of lattice vacancies on the band structure of the Ag<Subscript>5</Subscript>Pb<Subscript>2</Subscript>O<Subscript>6</Subscript> ternary oxide

The effect of structural vacancies in the silver sublattice on the band structure and on the nature of interatomic interactions in the ternary oxide Ag₅Pb₂O₆ is discussed in terms of the results of self-consistent full-potential linearized muffin-tin orbital (LMTO) calculations.     

Two-dimensional quantum ferromagnet,magnetic chains,and oxygen ordering in La<Subscript>2</Subscript>NiO<Subscript>4.125</Subscript> single crystals

A method using the atom-vacancy ordering phenomenon for the visualization of structural vacancies in crystals was suggested and implemented. The ordered nonstoichiometric titanium monoxide Ti₅O₅ was taken as the object of investigation, because the structural vacancies in this compound can be observed due to the formation of continuous vacancy channels in certain crystallographic directions. The structural vacancies in the specially oriented sample of ordered titanium monoxide were directly observed by high-resolution transmission electron microscopy with a magnification of 4×10⁶.     

Preparation and electrochemical properties of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>/Ti<Subscript>4</Subscript>O<Subscript>7</Subscript> composite for lithium-ion batteries

In order to improve the rate capability of Li₄Ti₅O₁₂, Ti₄O₇ powder was successfully fabricated by improved hydrogen reduction method, then a dual-phase composite Li₄Ti₅O₁₂/Ti₄O₇ has been synthesized as anode material for lithium-ion batteries. It is found that the Li₄Ti₅O₁₂/Ti₄O₇ composite shows higher reversible capacity and better rate capability compared to Li₄Ti₅O₁₂. According to the charge-discharge tests, the Li₄Ti₅O₁₂/Ti₄O₇ composite exhibits excellent rate capability of 172.3 mAh g^?1 at 0.2 C, which is close to the theoretical value of the spinel Li₄Ti₅O₁₂. More impressively, the reversible capacity of Li₄Ti₅O₁₂/Ti₄O₇ composite is 103.1 mAh g^?1 at the current density of 20 C after 100th cycles, and it maintains 84.8% of the initial discharge capacity, whereas that of the bare spinel Li₄Ti₅O₁₂ is only 22.3 mAh g^?1 with a capacity retention of 31.1%. The results indicate that Li₄Ti₅O₁₂/Ti₄O₇ composite could be a promising anode material with relative high capacity and good rate capability for lithium-ion batteries.     

Structure,ionic conduction,and phase transformations in lithium titanate Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>

The spinel structure of lithium titanate Li₄Ti₅O₁₂ is refined by the Rietveld full-profile analysis with the use of x-ray and neutron powder diffraction data. The distribution and coordinates of atoms are determined. The Li₄Ti₅O₁₂ compound is studied at high temperatures by differential scanning calorimetry and Raman spectroscopy. The electrical conductivity is measured in the high-temperature range. It is shown that the Li₄Ti₅O₁₂ compound with a spinel structure undergoes two successive order-disorder phase transitions due to different distributions of lithium atoms and cation vacancies (□, V) in a defect structure of the NaCl type: (Li)_8a[Li_0.33Ti_1.67]_16dO₄ → [Li□]_16c[Li_1.33Ti_1.67]_16dO₄ → [Li_1.33□_0.67]_16c[Ti_1.67□_0.33]_16dO₄. The low-temperature diffusion of lithium predominantly occurs either through the mechanism ... → Li(8a) → V(16c) → V(8a) → ... in the spinel phase or through the mechanism ... → Li(16c) → V(8a) → V(16c) → ... in an intermediate phase. In the high-temperature phase, the lithium cations also migrate over 48f vacancies: ... Li(16c) → V(8a, 48f) → V(16c) → ....     

Integrated investigation of the Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> phase stability

The Li₄Ti₅O₁₂ is applied in lithium ion batteries as anode material, which can be synthesized by various synthesis techniques. In this study, the molten salt synthesis technique at low temperatures, i.e. 350 °C, was applied to synthesize Li₄Ti₅O₁₂. Surprisingly, the Li₄Ti₅O₁₂ was not formed according to XRD analysis, which raised question about the stability range of Li₄Ti₅O₁₂. To investigate the stability of Li₄Ti₅O₁₂ at low temperatures, the high-temperature calcined Li₄Ti₅O₁₂ powder was equilibrated in the LiCl-KCl eutectic salt at 350 °C. The result of experiment revealed that the Li₄Ti₅O₁₂ is not decomposed. Results of ab initio calculations also indicated that the Li₄Ti₅O₁₂ phase is a stable phase at 0 K. The products of molten salt synthesis technique were then annealed at 900 °C, which resulted in the Li₄Ti₅O₁₂ formation. It was concluded that the Li₄Ti₅O₁₂ is a stable phase at low temperatures and the reasons for not forming the Li₄Ti₅O₁₂ by molten salt technique at low temperature are possibly related to activation energy and kinetic barriers. The Li₄Ti₅O₁₂ formation energy is also very small, due to the results of ab initio calculations.     

Microstructures and impedance studies of Bi<Subscript>3.15</Subscript>Nd<Subscript>0.85</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> thin films

Microstructures and impedance characteristics of chemical-solution-derived Bi_3.15Nd_0.85Ti₃O₁₂ thin films were studied as functions of temperature. A dielectric anomaly was found at around 450°C, corresponding to the paraelectric to ferroelectric transition. Via complex impedance studies, grain and grain boundary contributions to the impedance were separated. The resistance of grain and grain boundaries is found governed by the same kind of space charge with an activation energy around 1.1 eV, close to that of oxygen vacancies in perovskite ferroelectrics. The low temperature ac conductance of BNdT thin films shows a frequency dispersion, which can also be ascribed to space charges mainly due to oxygen vacancies. The results were compared with SrBi₂Ta₂O₉ in terms of oxygen vacancy conductivity.     

Controlled synthesis of photoluminescent Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> nanoparticles from metal-organic polymeric precursor

Bi₄Ti₃O₁₂ (BIT) nanoparticles with a narrow average particle size distribution in the range of 11–46 nm was synthesized via a metal-organic polymeric precursor process. The crystallite size and lattice parameter of BIT were determined by XRD analysis. At annealing temperatures >550 °C, the orthorhombic BIT compound with lattice parameters a = 5.4489 Å, b = 5.4147 Å, and c = 32.8362 Å was formed while at lower annealing temperatures orthorhombicity was absent. Reaction proceeded via the formation of an intermediate phase at 500 °C with a stoichiometry close to Bi₂Ti₂O₇. The particle size and the agglomerates of the primary particles have been confirmed by FESEM and TEM. The decomposition of the polymeric gel was ascertained in order to evaluate the crystallization process from TG-DSC analysis. Raman spectroscopy was used to investigate the lattice dynamics in BIT nanoparticles. In addition, investigation of the dependence of the visible emission band around the blue–green color emission on annealing temperatures and grain sizes showed that the effect of grain size plays important roles, and that oxygen vacancies may act as the radiative centers responsible for the observed visible emission band.     

Simulation of the short-range order in disordered cubic titanium monoxide TiO1.0

A model of the atomic structure with the short-range order in the vacancy distribution for the disordered cubic phase of titanium monoxide TiO_1.0 has been proposed. The effect of the short-range order on the electronic structure and the stability of the compound has been studied by the supercell method within the DFT-GGA approximation with the use of pseudopotentials. It has been established that the appearance of the short-range order considerably decreases the total energy. The decrease in the energy is comparable with the energy gain during the ordering of the vacancies according to the type of monoclinic superstructure Ti₅O₅ to the long-range order parameter η = 0.7. It has been shown that the discrepancies between the theoretical and experimental electronic spectra of titanium monoxide can be explained by allowance for the short range order.     

Impedance analysis of Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric ceramic

AC impedance spectroscopy technique has been used to study electrical properties of Bi_3.25La_0.75Ti₃O₁₂ (BLT) ceramic. Complex impedance plots were fitted with three depressed semicircles, which are attributed to crystalline layer, plate boundary and grain boundary and all three were found to comprise of universal capacitance nature [C = C0w ⁿ⁻¹]. Grain boundary resistance and capacitance evaluated from complex impedance plots have larger values than that of plate boundary and crystalline layer. The activation energies (E _a) for DC-conductance in grain boundary, plate boundary and crystalline layer are 0.68 eV, 0.89 eV and 0.89 eV, respectively. Relaxation activation energies calculated from impedance plots showed similar values, 0.81 eV and 0.80 eV for crystalline layer and plate boundary, respectively. These activation energy values are found to be consistent with the E _a value of oxygen vacancies in perovskite materials. A mechanism is offered to explain the generation of oxygen vacancies in BLT ceramic and its role in temperature dependence of DC-conductance study.      

Enhanced electrochemical performance of Cu<Subscript>2</Subscript>O-modified Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> anode material for lithium-ion batteries

Li₄Ti₅O₁₂/Cu₂O composite was prepared by ball milling Li₄Ti₅O₁₂ and Cu₂O with further heat treatment. The structure and electrochemical performance of the composite were investigated via X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge–discharge tests. Li₄Ti₅O₁₂/Cu₂O composite exhibited much better rate capability and capacity performance than pristine Li₄Ti₅O₁₂. The discharge capacity of the composite at 2 C rate reached up to 122.4 mAh g^?1 after 300 cycles with capacity retention of 91.3 %, which was significantly higher than that of the pristine Li₄Ti₅O₁₂ (89.6 mAh g^?1). The improvement can be ascribed to the Cu₂O modification. In addition, Cu₂O modification plays an important role in reducing the total resistance of the cell, which has been demonstrated by the electrochemical impedance spectroscopy analysis.     

Electronic Structure of Oxygen Vacancies in the Orthorhombic Noncentrosymmetric Phase Hf<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript>

The electronic structure of stoichiometric and oxygen-depleted Hf_0.5Zr_0.5O₂ in the orthorhombic noncentrosymmetric phase has been studied by X-ray photoelectron spectroscopy and quantum-chemical simulation based on the density functional theory. It has been established that the ion-etching-induced peak in the photoelectron emission spectrum with the energy above the top of the o-Hf_0.5Zr_0.5O₂ valence band is due to oxygen vacancies. A method of estimating the density of oxygen vacancies from the comparison of the experimental and theoretical photoelectron spectra of the valence band has been proposed. It has been established that oxygen polyvacancies in o-Hf_0.5Zr_0.5O₂ are not formed: the energetically favorable spatial arrangement of oxygen vacancies in a crystal corresponds to noninteracting oxygen vacancies distant from each other.     

First-principle calculations for electronic structure and bonding properties in layered Na<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>7</Subscript>

First-principles calculations of Na₂Ti₃O₇ have been carried out with density-functional theory (DFT) and ultrasoft pseudopotentials. The electronic structure and bonding properties in layered Na₂Ti₃O₇ have been studied through calculating band structure, density of states, electron density, electron density difference and Mulliken bond populations. The calculated results reveal that Na₂Ti₃O₇ is a semiconductor with an indirect gap and exhibits both ionic and covalent characters. The stability of the (Ti₃O₇)²⁻ layers is attributed to the covalent bonding of strong interactions between O 2p and Ti 3d orbitals. Furthermore, the O atoms located in the innerlayers interact more strongly with the neighboring Ti atoms than those in the interlayer regions. The ion-exchange property is due to the ionic bonding between the Na⁺ and (Ti₃O₇)²⁻ layers, which can stabilize the interlayers of layered Na₂Ti₃O₇ structure.     

Effects of dopant on the electrochemical properties of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> anode materials

The effects of dopant on the electrochemical properties of spinel-type Li_3.97M_0.1Ti_4.94O₁₂ (M = Mn, Ni, Co) and Li_(4-x/3)Cr_xTi_(5-2x/3)O₁₂(x = 0.1, 0.3, 0.6, 0.9, 1.5) were systematically investigated. Charge-discharge cycling were performed at a constant current density of 0.5 mA/cm² between the cut-off voltages of 3.0 and 1.0 V, the experimental results showed that Cr³⁺ dopant improved the reversible capacity and cycling stability over the pristine Li₄Ti₅O₁₂. The substitution of the Mn³⁺ and Ni³⁺ slightly decreased the capacity of the Li₄Ti₅O₁₂. Dopants such as Co³⁺ to some extent worsened the electrochemical performance of the Li₄Ti₅O₁₂.     

Electrospinning preparation of one-dimensional Co<Superscript>2+</Superscript>-doped Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> nanofibers for high-performance lithium ion battery

One-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofibers with a diameter of approximately 500 nm have been synthesized via a one-step controllable electrospinning method. The Co²⁺-doped Li₄Ti₅O₁₂ nanofibers were systematically characterized by XRD, ICP, TEM, SEM, BET, EDS mapping, and XPS. Based on the cubic spinel structure and one-dimensional effect of Li₄Ti₅O₁₂, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers exhibit the enlarged lattice volume, reduced particle size and enhanced electrical conductivity. More importantly, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers as a lithium ion battery anode electrode performs superior electrochemical performance than undoped Li₄Ti₅O₁₂ electrode in terms of electrochemical measurements. Particularly, the reversible capacity of Co²⁺-doped Li₄Ti₅O₁₂ electrode reaches up to 140.1 mAh g^?1 and still maintains 136.5 mAh g^?1 after 200 cycles at a current rate of 5 C. Therefore, one-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofiber electrodes, showing high reversible capacity and remarkable recycling property, could be a potential candidate as an anode material.     

Cluster formation in LiNi<Subscript>0.4</Subscript>Fe<Subscript>0.6</Subscript>O<Subscript>2</Subscript>

The structure of an LiNi_0.4Fe_0.6O₂ cubic solid solution is determined using magnetic measurements and electron diffraction. It is found that this solid solution has a microinhomogeneous structure due to the formation of superparamagnetic clusters. The electron diffraction analysis of LiNi_0.4Fe_0.6O₂ samples has revealed diffuse scattering characteristic of the substitutional short-range order in ordered solid solutions with a B1-type structure. It is shown that the short-range order is associated with the LiNiO₂-type rhombohedral superstructure (space group \(R\bar 3m\)), i.e., with the redistribution of lithium and nickel atoms in the (111)_B1 alternating planes. The short-range order is observed in regions with a nickel content higher than the mean nickel content corresponding to the macroscopic composition.     

Luminescence properties of phosphors based on Tb<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> (TbAG) terbium-aluminum garnet

The processes of excitation energy transfer in phosphors based on single-crystal Tb₃Al₅O₁₂:Ce (TbAG:Ce) and Tb₃Al₅O₁₂:Ce,Eu (TbAG:Ce,Eu) garnet films have been investigated. These films are considered to be promising materials for screens for X-ray images and luminescence converters of blue LED radiation. The conditions for excitation energy transfer from the matrix (Tb³⁺ cations) to Ce³⁺ and Eu³⁺ ions in TbAG:Ce and TbAG:Ce,Eu phosphors have been analyzed in detail. It is established that a cascade process of excitation energy transfer from Tb³⁺ ions to Ce³⁺ and Eu³⁺ ions and from Ce³⁺ ions to Eu³⁺ ions is implemented in TbAG:Ce,Eu via dipole-dipole interaction and through the Tb³⁺ cation sublattice.     

Pr-modified Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> nanofibers as an anode material for lithium-ion batteries with outstanding cycling performance and rate performance

Pr-doped Li₄Ti₅O₁₂ in the form of Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0, 0.01, 0.03, 0.05, and 0.07) was synthesized successfully by an electrospinning technique. ICP shows that the doped samples are closed to the targeted samples. XRD analysis demonstrates that traces of Pr³⁺ can enlarge the lattice parameter of Li₄Ti₅O₁₂ from 8.3403 to 8.3765 Å without changing the spinel structure. The increase of lattice parameter is beneficial to the intercalation and de-intercalation of lithium-ion. XPS results identify the existence form of Ti is mainly Ti⁴⁺ and Ti³⁺ in minor quantity in Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0.05) samples due to the small amount of Pr³⁺. The transition from Ti⁴⁺ to Ti³⁺ is conducive to the electronic conductivity of Li₄Ti₅O₁₂. FESEM images show that all the nanofibers are well crystallized with a diameter of about 200 nm and distributed uniformly. The results of electrochemical measurement reveal that the 1D Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0.05) nanofibers display enhanced high-rate capability and cycling stability compared with that of undoped nanofibers. The high-rate discharge capacity of the Li_4?x/3Ti_5?2x/3Pr_xO₁₂ (x = 0.05) samples is excellent (101.6 mAh g^?1 at 50 °C), which is about 58.48 % of the discharge capacity at 0.2 °C and 4.3 times than that of the bare Li₄Ti₅O₁₂ (23.5 mA g^?1). Even at 10 °C (1750 mA g^?1), the specific discharge capacity is still 112.8 mAh g^?1 after 1000 cycles (87.9 % of the initial discharge capacity). The results of cyclic voltammograms (CV) and electrochemical impedance spectroscopy (EIS) illustrate that the Pr-doped Li₄Ti₅O₁₂ electrodes possess better dynamic performance than the pure Li₄Ti₅O₁₂, further confirming the excellent electrochemical properties above.     

Evolution of crystal structure and electrochemical performance of layered Li<Subscript>1.20</Subscript>Ti<Subscript>0.44</Subscript>Cr<Subscript>0.36</Subscript>O<Subscript>2</Subscript>/C cathode materials with cycling

Carbon-coated layered Li_1.20Ti_0.44Cr_0.36O₂/C and pristine Li_1.20Ti_0.44Cr_0.36O₂ cathode materials have been synthesized through a sol–gel method followed by high-temperature calcination. Their electrochemical performances have been evaluated, which indicate that the Li_1.20Ti_0.44Cr_0.36O₂/C exhibits much higher cyclic stability and capacity than the pristine one. The initial delithiation capacity of the Li_1.20Ti_0.44Cr_0.36O₂/C can reach 217.1 mAh g^?1. The reversible capacity retention is 94 % after 100 cycles at current density of 23 mA g^?1. Ex situ X-ray diffraction and electrochemistry impedance spectroscopy coupled with impedance fitting have been employed to reveal evolution of the crystal structure and the electrochemical kinetics of the Li_1.20Ti_0.44Cr_0.36O₂/C with delithiation/lithiation cycling. The results indicate that the cation layers of the Li_1.20Ti_0.44Cr_0.36O₂/C experience order to disorder transition. The abrupt delithiation capacity fading and potential drop after the initial cycle are resulted from the order to disorder transition accompanying with steep increase of the charge transfer resistance and decrease of the exchange current density and the Li-ion diffusion coefficient simultaneously.