Synthesis, structure, and characterization of new mononuclear Mn(II) complexes. Electrochemical conversion into new oxo-bridged Mn(2)(III,IV) complexes. Role of chloride ions

Two Mn(II) complexes are isolated and X-ray characterized, namely, cis-[(L(2))Mn(II)(Cl)(2)] (1) and [(L(3))Mn(II)Cl(OH(2))](ClO(4)) (2(ClO(4))), where L(2) and L(3) are the well-known tetradentate N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine and N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)propane-1,3-diamine ligands, respectively. The crystal structure reveals that whereas the ligand L(2) is in the cis-alpha conformation in complex 1, the ligand L(3) is in the more unusual cis-beta conformation in 2. EPR spectra are recorded on frozen solutions for both complexes and are characteristic of Mn(II) species. Electrochemical behaviors are investigated on acetonitrile solution for both complexes and show that cation 2 exists as closely related Mn(II) species in equilibrium. For both complexes exhaustive bulk electrolyses of acetonitrile solution are performed at oxidative potential in various experimental conditions. In the presence of 2,6-lutidine and after elimination of chloride ligands, the formation of the di-mu-oxo mixed-valent complexes [(L(2))Mn(III)(mu-O)(2)Mn(IV)(L(2))](3+) (3a) and [(L(3))Mn(III)(mu-O)(2)Mn(IV)(L(3))](3+) (4) is confirmed by UV-vis and EPR spectroscopies and cyclic voltammetry. In addition crystals of 4(ClO(4))(3) were isolated, and the X-ray structure reveals the cis-alphaconformation of L(3). In the absence of 2,6-lutidine and without elimination of the exogenous chloride ions, the electrochemical oxidation of 1 leads to the formation of the mononuclear Mn(III) complex, namely, [(L(2))Mn(III)(Cl)(2)](+) (5), as confirmed by UV-vis as well as parallel mode EPR spectroscopy and cyclic voltammetry. In the same conditions, the electrochemical oxidation of complex 2 is more intricate, and a thorough analysis of EPR spectra establishes the formation of the binuclear mono-mu-oxo mixed-valent [(L(3))ClMn(III)(mu-O)Mn(IV)Cl(L(3))](3+) (6) complexes. Electrochemical conversion of Mn(II) complexes into mixed-valent Mn(2)(III,IV) oxo-bridged complexes in the presence of 2,6-lutidine is discussed. The role of the chloride ligands as well as that of L(3) in the building of oxo bridges is discussed. Differences in behavior between L(2) and L(3) are commented on.     

Synthesis and structural characterization of high spin M/Cu (M = Mn, Fe) heterobimetallic and Fe/Cu2 trimetallic phosphinoamides

The heterobimetallic complexes [Mn((i)PrNPPh(2))(3)Cu((i)PrNHPPh(2))] (1) and [Fe((i)PrNPPh(2))(3)Cu((i)PrNHPPh(2))] (2) have been synthesized by the one pot reaction of LiN(i)PrPPh(2), MCl(2) (M = Mn, Fe), and CuI in high yield. Addition of excess CuI into 2 or directly to the reaction mixture led to the formation of a heterotrimetallic [Fe((i)PrNPPh(2))(3)Cu(2)((i)PrNPPh(2))] (3) in good yield. Complexes 1-3 have been characterized by means of elemental analysis, paramagnetic (1)H NMR, UV-vis spectroscopy, cyclic voltammetry, and single crystal X-ray analysis. In all three complexes, Mn or Fe are in the +2 oxidation state and have a high spin electron configuration, as evidenced by solution Evans' method. In addition, the oxidation state of Fe in complex 3 is confirmed by zero-field (57)Fe M?ssbauer spectroscopy. X-ray crystallography reveals that the three coordinate Mn/Fe centers in the zwitterionic complexes 1-3 adopt an unusual trigonal planar geometry.     

Reactions of copper(II)-H2O2 adducts supported by tridentate bis(2-pyridylmethyl)amine ligands: sensitivity to solvent and variations in ligand substitution

The copper(II) complexes 1(H) and 1(Ar(X)), supported by the N,N-di(2-pyridylmethyl)benzylamine tridentate ligand (L(H)) or its derivatives having m-substituted phenyl group at the 6-position of pyridine donor groups (L(Ar(X))), have been prepared, and their reactivity toward H2O2 has been examined in detail at low temperature. Both copper(II) complexes exhibited a novel reactivity in acetone, giving 2-hydroxy-2-hydroperoxypropane (HHPP) adducts 2(H) and 2(Ar(X)), respectively. From 2(Ar(X)), an efficient aromatic ligand hydroxylation took place to give phenolate-copper(II) complexes 4(Ar(X)). Detailed spectroscopic and kinetic analyses have revealed that the reaction proceeds via an electrophilic aromatic substitution mechanism involving copper(II)-carbocation intermediates 3(Ar(X)). Theoretical studies at the density functional theory (DFT) level have strongly implicated conjugate acid/base catalysis in the O-O bond cleavage and C-O bond formation steps that take the peroxo intermediate 2(Ar(X)) to the carbocation intermediate 3(Ar(X)). In contrast to the 2(Ar(X)) cases, the HHPP-adduct 2(H) reacted to give a copper(II)-acetate complex [Cu(II)(L(H))(OAc)](ClO4) (6(H)), in which one of the oxygen atoms of the acetate co-ligand originated from H2O2. In this case, a mechanism involving a Baeyer-Villiger type 1,2-methyl shift from the HHPP-adduct and subsequent ester hydrolysis has been proposed on the basis of DFT calculations; conjugate acid/base catalysis is implicated in the 1,2-methyl shift process as well. In propionitrile, both 1(H) and 1(Ar(X)) afforded simple copper(II)-hydroperoxo complexes LCu(II)-OOH in the reaction with H2O2, demonstrating the significant solvent effect on the reaction between copper(II) complexes and H2O2.     

Mechanistic aspects of vanadium catalysed oxidations with peroxides

The enhancement of the reactivity of peroxides, particularly hydrogen peroxide and alkylhydroperoxides, in the presence of vanadium catalysis is a very well known process. The catalytic effect is determined by the formation of an intermediate whose nature depends on the peroxides used and on its interaction with the metal precursor, high-valent peroxo vanadium species being usually the reactive oxidants. During the last decades the mechanistic details for several types of oxidation reactions have been elucidated. Interestingly, in a number of cases theoretical calculations offered support to the proposed reaction pathways.In general, V(V) peroxo species behave as electrophilic oxygen transfer reagents thus reacting preferentially with the more nucleophilic functional group present in the molecule. In several instances the chemoselectivity observed in such processes is very high when not absolute. As far as vanadium peroxides are concerned, a radical oxidative reactivity toward alkanes and aromatics has been also observed; also for this latter chemistry, diverse research groups studied in detail the mechanism. On the other hand, no clear-cut evidence of nucleophilic reactivity of vanadium peroxo complexes has been obtained.Here we collect a selection of recent achievements concerning the reaction mechanisms in the vanadium catalysed oxidation and bromination reactions with peroxides.     

Nucleophilic reactivity of a series of peroxomanganese(III) complexes supported by tetradentate aminopyridyl ligands

Peroxomanganese(iii) adducts have been postulated as important intermediates in manganese-containing enzymes and small molecule oxidation catalysts. Synthetic peroxomanganese(iii) complexes are known to be nucleophilic and facilitate aldehyde deformylation, offering a convenient way to compare relative reactivities of complexes supported by different ligands. In this work, tetradentate dipyridyldiazacycloalkane ligands with systematically perturbed steric and electronic properties were used to generate a series of manganese(ii) and peroxomanganese(iii) complexes. X-Ray crystal structures of five manganese(ii) complexes all show the ligands bound to give trans complexes. Treatment of these Mn(II) precursors with H(2)O(2) and Et(3)N in MeCN at -40 °C results in the formation of peroxomanganese(iii) complexes that differ only in the identity of the pyridine ring substituent and/or the number of carbons in the diazacycloalkane backbone. To determine the effects of small ligand perturbations on the reactivity of the peroxo group, the more thermally stable peroxomanganese(iii) complexes were reacted with cyclohexanecarboxaldehyde. For these complexes, the rate of deformylation does not correlate with the expected nucleophilicity of the peroxomanganese(iii) unit, as the inclusion of methyl substituents on the pyridines affords slower deformylation rates. It is proposed that adding methyl-substituents to the pyridines, or increasing the number of carbons on the diazacycloalkane, sterically hinders nucleophilic attack of the peroxo ligand on the carbonyl carbon of the aldehyde.     

Reactivity studies on Fe(III)-(O2(2-))-Cu(II) compounds: influence of the ligand architecture and copper ligand denticity

Heme-Cu/O2 adducts are of interest in the elucidation of the fundamental metal-O2 chemistry occurring in heme-Cu enzymes which effect reductive O-O cleavage of dioxygen to water. In this report, the chemistry of four heme-peroxo-copper [FeIII-(O22-)-CuII]+ complexes (1-4), varying in their ligand architecture, copper-ligand denticity, or both and thus their structures and physical properties are compared in their reactivity toward CO, PPh3, acids, cobaltocene, and phenols. In 1 and 2, the copper(II) ligand is N4-tetradentate, and the peroxo unit is bound side-on to iron(III) and end-on to the copper(II). In contrast, 3 and 4 contain a N3-tridentate copper(II) ligand, and the peroxo unit is bound side-on to both metal ions. CO "displaces" the peroxo ligand from 2-4 to form reduced CO-FeII and CO-CuI species. PPh3 reacts with 3 and 4 displacing the peroxide ligand from copper, forming (porphyrinate)FeIII-superoxide plus CuI-PPh3 species. Complex 2 does not react with PPh3, and surprisingly, 1 reacts neither with PPh3 nor CO, exhibiting remarkable stability toward these reagents. The behavior of 1 and 2 compared to that of 3 and 4 correlates with the different denticity of the copper ligand (tetra vs tridentate). Complexes 1-4 react with HCl releasing H2O2, demonstrating the basic character of the peroxide ligand. Cobaltocene causes the two-electron reduction of 1-4 giving the corresponding micro-oxo [FeIII-(O2-)-CuII]+ complexes, in contrast to the findings for other heme-peroxo-copper species of different design. With t-butyl-substituted phenols, no reaction occurs with 1-4. The results described here emphasize how ligand design and variations influence and control not only the structure and physical properties but also the reactivity patterns for heme-Cu/O2 adducts. Implications for future investigations of protonated heme/Cu-peroxo complexes, low-spin analogues, and ultimately O-O cleavage chemistry are discussed.     

Fixation of both O2 and CO2 from air by a crystalline palladium complex bearing N-heterocyclic carbene ligands

Crystals of the two-coordinate palladium(0) complex 1 bearing the new N-heterocyclic carbene ligand, ITmt, directly and rapidly fixed both O2 and CO2 from air to produce the corresponding palladium(II) peroxocarbonate complex 2. The present reaction consists of dioxygenation of the palladium(0) complex 1 to the palladium(II) peroxo complex 3 and the subsequent CO2 insertion to produce the peroxocarbonate complex 2. Reaction of the crystals of 1 with air was monitored by microscopic IR spectroscopy to confirm the sequence of the two-step solid-state reaction. The unique reactivity of solid 1 toward air was explained in terms of the structural features of the carbene ligand, ITmt.     

Metal complexes and solvent extraction properties of isonitrosoacetophenone 2-aminobenzoylhydrazone

Three types of copper complexes as well as an oximate-bridged nickel complex with isonitrosoacetophenone 2-aminobenzoylhydrazone (H(2)L) have been prepared in ethanolic solution and characterized by elemental analyses, IR, (1)H NMR, UV-vis and magnetic susceptibility measurement. IR spectra show the ligand coordinates as a neutral, monoanionic and dianionic O,N,N-tridentate acylhydrazoneoxime ligand depending reaction conditions and metal salts employed. The elemental analyses results, spectroscopic and magnetic data are consistent with the formation of mononuclear copper complexes and binuclear complexes with both copper and nickel. The effects of varying pH and solvent on the absorption behavior of both ligand and complexes have been investigated. The extraction ability of acylhydrazoneoxime ligand has been examined by the liquid-liquid extraction of selected transition metal [Cu(2+), Ni(2+), Co(2+), Cr(3+), Hg(2+), Zn(2+), Cd(2+) and Mn(2+)] cations. The ligand shows strong binding ability toward copper(II) ion.     

Metal nature effect on catalytic reactions in furfural-H2O2-H2O-group V or VI d-metal salt systems in acid media

Homogeneous catalytic reactions of furfural oxidation by hydrogen peroxide in an aqueous medium in the presence of catalytic amounts of a vanadium, niobium, molybdenum, or chromium salt have been studied to compare them with the acid-autocatalytic reaction. The formation of peroxo complexes of the corresponding metals has been established. The interaction of these peroxo complexes with the carbonyl group of furfural affords organic metal-containing peroxides. The subsequent transformations of these peroxides in the presence of the indicated catalysts lead to different dominant final products. This is explained by different mechanisms of the oxidation of the key intermediates, namely, 2-formyloxy- and 2-hydroxyfurans. In the presence of the vanadium and molybdenum salts, the catalytic role of the resuting carboxylic acids is insignificant, as distinct from what is observed in the acid-autocatalyzed reaction.

     

Reaction of [M(eta3-allyl)(eta2-amidinato)(CO)2(pyridine)] complexes (M = Mo, W) with bidentate ligands: nitrogen donor vs. phosphorus donor

The reactivity of amidinato complexes of molybdenum and tungsten bearing pyridine as a labile ligand, [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)(pyridine)](M = Mo; 1-Mo, M = W; 1-W), toward bidentate ligands such as 1,10-phenanthroline (phen) and 1,2-bis(diphenylphosphino)ethane (dppe) was investigated. The reaction of 1 with phen at ambient temperature resulted in the formation of monodentate amidinato complexes, [M(eta(3)-allyl)(eta(1)-amidinato)(CO)(2)(eta(2)-phen)](M = Mo; 2-Mo, M = W; 2-W), which has pseudo-octahedral geometry with the amidinato ligand coordinated to the metal in an eta(1)-fashion. The phen ligand was located coplanar with two CO ligands and the eta(1)-amidinato ligand was positioned trans to the eta(3)-allyl ligand. In solution, both complexes 2-Mo and 2-W showed fluxionality, and complex 2-Mo afforded allylamidine (3) on heating in solution. In the reaction of 1 with dppe at ambient temperature, the simple substitution reaction took place to give dppe-bridged binuclear complexes [{M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)}(2)(mu-dppe)](M = Mo; 5-Mo, M = W; 5-W), whereas mononuclear monocarbonyl complexes [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(eta(2)-dppe)](M = Mo; 6-Mo, M = W; 6-W) were obtained under acetonitrile- or toluene-refluxing conditions. Mononuclear complex 6 was also obtained by the reaction of binuclear complex 5 with 0.5 equivalents of dppe under refluxing in acetonitrile or in toluene. The X-ray analyses and variable-temperature (31)P NMR spectroscopy of complex 6 indicated the existence of the rotational isomers of the eta(3)-allyl ligand, i.e., endo and exo forms, with respect to the carbonyl ligand. The different reactivity of complex 1 toward phen and dppe seems to have come from the difference in the pi-acceptability of each bidentate ligand.     

Probing the reactivity of oxomanganese-salen complexes: an electrospray tandem mass spectrometric study of highly reactive intermediates

Electrospray ionization in combination with tandem mass spectrometric techniques has been employed to study the formation of oxomanganese-salen complexes upon oxidation of [Mn(III)(salen)]+ cations as well as the properties and reactions of the oxidized species in the gas phase. Two species could be characterized as the principal oxidation products: the oxomanganese(v) complex, [Mn=O(salen)]+, which is the actual oxygen-transfer agent in epoxidation reactions, and the dinuclear, mu-oxo bridged [L(salen)Mn-O-Mn(salen)L]2+ with two terminal ligands L; the latter acts as a reservoir species. The effects of various substituents in the 5- and 5'-positions, respectively, of the salen ligand on the reactivity of the epoxidation catalyst were determined quantitatively from CID (collision-induced dissociation) experiments and B3LYP density functional calculations. Accordingly, the effect of axial donor ligands on the reactivity of the epoxidation catalyst was studied. Electron-withdrawing substitutents on the salen ligand and additional axial ligands decrease the stability and thus enhance the reactivity of the Mn=O moiety, while electron-donating salen substituents have a strong stabilizing effect.     

Oxygen reduction reactions of monometallic rhodium hydride complexes

Selective reduction of oxygen is mediated by a series of monometallic rhodium(III) hydride complexes. Oxidative addition of HCl to trans-Rh(I)Cl(L)(PEt(3))(2) (1a, L = CO; 1b, L = 2,6-dimethylphenylisocyanide (CNXy); 1c, L = 1-adamantylisocyanide (CNAd)) produces the corresponding Rh(III) hydride complex cis-trans-Rh(III)Cl(2)H(L)(PEt(3))(2) (2a-c). The measured equilibrium constants for the HCl-addition reactions show a pronounced dependence on the identity of the "L" ligand. The hydride complexes effect the reduction of O(2) to water in the presence of HCl, generating trans-Rh(III)Cl(3)(L)(PEt(3))(2) (3a-c) as the metal-containing product. In the case of 2a, smooth conversion to 3a proceeds without spectroscopic evidence for an intermediate species. For 2b/c, an aqua intermediate, cis-trans-[Rh(III)(OH(2))Cl(2)(L)(PEt(3))(2)]Cl (5b/c), forms along the pathway to producing 3b/c as the final products. The aqua complexes were independently prepared by treating peroxo complexes trans-Rh(III)Cl(L)(η(2)-O(2))(PEt(3))(2) (4b/c) with HCl to rapidly produce a mixture of 5b/c and 3b/c. The reactivity of the peroxo species demonstrates that they are plausible intermediates in the O(2)-reduction chemistry of hydride complexes 2a-c. These results together show that monometallic rhodium hydride complexes are capable of promoting selective reduction of oxygen to water and that this reaction may be controlled with systematic alteration of the ancillary ligand set.     

DFT study of the structure and reactivity of the terminal Pt(IV)-oxo complex bearing no electron-withdrawing ligands

The recently published [(PCN)Pt═O](+) complex is interesting as a unique example of a stable d(6) terminal transition metal oxo complex not stabilized by electron withdrawing ligands and as a model of oxo complexes frequently implicated as key intermediates in various processes of oxygen transfer. In the present work, we report an extensive DFT study of its geometric and electronic structure, composition in solution, and reactivity. The thermodynamic data and calculated (195)Pt NMR chemical shifts reveal that one solvent molecule is weakly coordinated to the complex in acetone solution. This ancillary ligand is responsible for the diamagnetic state of the complex, retards intramolecular oxygen transfer, and facilitates CO oxidation. Chemical transformations of the coordinated acetone molecule, coordination of other ancillary ligands present in the reaction mixture, and protonation of the Pt-oxo group in nonacidic media are excluded based on thermodynamic or kinetic considerations. Bonding of the terminal oxo ligand with strong electrophiles presents the key interaction in the mechanisms of intramolecular oxygen insertion into the Pt-P bond, in CO oxidation and in water activation mediated by microsolvation. Low affinity of the terminal oxo ligand toward "soft" covalent interactions brings about intermediate formation of agostic hydrido and hydroxo complexes along the reaction pathway of dihydrogen oxidation. Stabilization of the Pt-oxo bonding is attributed to bending of the terminal oxo ligand out of the plane of the complex and to significant transfer of electron density from compact low lying Pt 5d orbitals to more diffuse 6s and 6p orbitals.     

Ligand Modification Transforms a Catalase Mimic into a Water Oxidation Catalyst

The catalytic reactivity of the high‐spin Mn^II pyridinophane complexes [(Py₂NR₂)Mn(H₂O)₂]²⁺ (R=H, Me, tBu) toward O₂ formation is reported. With small macrocycle N‐substituents (R=H, Me), the complexes catalytically disproportionate H₂O₂ in aqueous solution; with a bulky substituent (R=tBu), this catalytic reaction is shut down, but the complex becomes active for aqueous electrocatalytic H₂O oxidation. Control experiments are in support of a homogeneous molecular catalyst and preliminary mechanistic studies suggest that the catalyst is mononuclear. This ligand‐controlled switch in catalytic reactivity has implications for the design of new manganese‐based water oxidation catalysts.     

Formation, characterization, and reactivity of bis(mu-oxo)dinickel(III) complexes supported by a series of bis[2-(2-pyridyl)ethyl]amine ligands.

Bis(mu-oxo)dinickel(III) complexes supported by a series of bis[2-(2-pyridyl)ethyl]amine ligands have been successfully generated by treating the corresponding bis(mu-hydroxo)dinickel(II) complexes or bis(mu-methoxo)dinickel(II) complex with an equimolar amount of H(2)O(2) in acetone at low temperature. The bis(mu-oxo)dinickel(III) complexes exhibit a characteristic UV-vis absorption band at approximately 410 nm and a resonance Raman band at 600-610 cm(-1) that shifted to 570-580 cm(-1) upon (18)O-substitution. Kinetic studies and isotope labeling experiments using (18)O(2) imply the existence of intermediate(s) such as peroxo dinickel(II) in the course of formation of the bis(mu-oxo)dinickel(III) complex. The bis(mu-oxo)dinickel(III) complexes supported by the mononucleating ligands (L1(X) = para-substituted N,N-bis[2-(2-pyridyl)ethyl]-2-phenylethylamine; X = OMe, Me, H, Cl) gradually decompose, leading to benzylic hydroxylation of the ligand side arm (phenethyl group). The kinetics of the ligand hydroxylation process including kinetic deuterium isotope effects (KIE), p-substituent effects (Hammett plot), and activation parameters (Delta H(H)(*) and Delta S(H)(*)) indicate that the bis(muxo)dinickel(III) complex exhibits an ability of hydrogen atom abstraction from the substrate moiety as in the case of the bis(mu-oxo)dicopper(III) complex. Such a reactivity of bis(mu-oxo)dinickel(III) complexes has also been suggested by the observed reactivity toward external substrates such as phenol derivatives and 1,4-cyclohexadiene. The thermal stability of the bis(mu-oxo)dinickel(III) complex is significantly enhanced when the dinucleating ligand with a longer alkyl strap is adopted instead of the mononucleating ligand. In the m-xylyl ligand system, no aromatic ligand hydroxylation occurred, showing a sharp contrast with the reactivity of the (mu-eta(2):eta(2)-peroxo)dicopper(II) complex with the same ligand which induces aromatic ligand hydroxylation via an electrophilic aromatic substitution mechanism. Differences in the structure and reactivity of the active oxygen complexes between the nickel and the copper systems are discussed on the basis of the detailed comparison of these two systems with the same ligand.     

Synthesis, spectroscopy and redox behaviors of 4,6-di-t-Bu-, 4-Me-6-t-Bu- and 4-t-Bu-2-nitrosophenolato copper(II) complexes; Characterization of radical species generated by PPh3

The synthesis, spectroscopy (IR, UV-Vis, ESR), magnetic and thermal behaviors, as well electrochemistry and reactivity towards PPh3 of alkyl-substituted bis(2-nitrosophenolato)copper(II) complexes, CuLx2, where Lx = 4,6-di-t-Bu-2-nitrosophenolato (L1), 4-CH3-6-t-Bu-2-nitrosophenolato (L2), 4-t-Bu-2-nitrosophenolato (L3) mono-anion ligands, are presented. The solid-state and solution ESR spectra showed an axially symmetric g-tensors with gII > g 2.03 indicating that the unpaired electron is located in the dx2 - y2orbital. When CuLx2 complexes were treated with an excess of PPh3 in air or under vacuum in toluene (or other solutions) at 300K, as confirmed by UV-Vis and ESR examination, without formation of PPh3 adduct of the complexes, the immediately generation of semiquinone type radical species and reduction of Cu(II) to Cu(I) were observed. In the case of CuL(1)(2) the further conversion of the generated primary radical species to secondary bis(PPh3)2(phenoxazinolato)Cu(I) semiquinone type radical was detected. The cyclic voltammetry (CV) of CuLx2 exhibited two successive quasi-reversible ligand centered reductions and two irreversible metal and ligand centered oxidation processes. Electrochemical behaviors were interpreted in terms of the existence two-valence tautomeric nitroso and oximato isomers of CuLx2 in solution.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献   

Mononuclear and dinuclear monoperoxovanadium(v) complexes with a hetero ligand. 1.(1) Self-decomposition reaction, detection of reactive oxygen species, and oxidizing ability

A mononuclear peroxovanadium(V) complex with histamine-N,N-diacetate (histada), K[VO(O(2))(histada)], and a dinuclear peroxovanadium(V) complex with 2-oxo-1,3-diaminopropane-N,N,N',N'-tetraacetate (dpot), Cs(3)[(VO)(2)(O(2))(2)(dpot)], were prepared and characterized. The self-decomposition reaction was examined for these peroxovanadium(V) complexes as well as for K[VO(O(2))(cmhist)] (cmhist = N-carboxymethylhistidinate). The reaction profiles depicted by the absorbance change in the UV-vis spectrum show a sigmoid shape with an induction period. The induction period is reduced by the addition of acid, fluoride, thiocyanate, VO(2+), VO(2)(+), and trolox compared to the solution containing perchlorate. On the other hand, the induction period was elongated by the addition of chloride, bromide, and 2-tert-butyl-p-cresol. These behaviors are discussed on the basis of a radical chain mechanism. The self-decomposition reactions have also been followed by the (1)H and (51)V NMR and EPR spectra. These spectral studies as well as the UV-vis spectral study indicate that vanadium(V) is partly reduced to vanadium(IV) in the self-decomposition process. The histada complex yields a mixed-valence dinuclear complex in a concentrated solution, and the dpot complex yields a mixed-valence tetranuclear complex. The reduction of vanadium ion suggests that the peroxo ligand may act as a reducing agent. In order to know the fate of the peroxo ligand, we tried to detect superoxide anion and hydroxyl radical, which were anticipated to be produced in the self-decomposition process. The formation of superoxide anion was spectrophotometrically confirmed using two independent methods, including the reduction of cytochrome c and the reduction of sodium 4-[3-(iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulfonate (WST-1). The formation of hydroxyl radical was confirmed by an EPR spin trapping technique. The oxidizing abilities of the peroxovanadium(V) complexes toward bovine serum albumin (BSA) were also evaluated. In the protein carbonyl assay, it was found that the total amount of protein carbonyl in BSA was increased by the reaction with the peroxovanadium complexes in the concentration-dependent manner. In addition, the oxidation of sulfhydryl group in BSA induced by the peroxovanadium complexes was confirmed.     

A monomeric Mn(III)-peroxo complex derived directly from dioxygen

The binding and activation of dioxygen by transition metal complexes is a fundamentally and practically important process in chemistry. Often the initial steps involve formation of peroxometal species that is difficult to observe because of their inherent reactivity. The interaction of dioxygen with a manganese(II) complex (1) of bis[(N'-tert-butylurealy)-N-ethyl]-(6-pivalamido-2-pyridylmethyl)amine was investigated, leading to the detection of a new intermediate that is a peroxomanganese(III) complex (2). This complex is high-spin (S = 2) with a g value of 8.2 and D = -2.0(5) as determined by parallel-mode electron paramagnetic resonance spectroscopy. The coordination of a peroxo ligand was established using Fourier transform infrared spectroscopy that reveals a new signal at 885 cm-1 for 2 when formed from 16O2-this band shifts to 837 cm-1 when 18O2 is used in the preparation. Moreover, electrospray ionization mass spectra contain a strong ion at an m/z of 576.2703 for the 16O-isotopomer that shifts to 580.2794 in the 18O-isotopomer. Complex 2 also is capable of oxidatively deformylating aldehydes, which is a known reaction of peroxometal complexes. The similarities of 2 to the peroxo intermediates in cytochrome P450 are noted.     

A dimeric titanium-containing polyoxometalate. Synthesis, characterization, and catalysis of H2O2-based thioether oxidation

The previously unknown titanium(IV)-containing mu-hydroxo dimeric heteropolytungstate (Bu4N)7[(PTiW11O39)2-OH] (TBA salt of H1) has been synthesized, starting from H5PTiW11O40, and characterized by elemental analysis, multinuclear (31P, 17O, 183W) NMR, IR, FAB-MS, cyclic voltammetry, and potentiometric titration. 31P NMR reveals that H1 (delta -12.76) readily forms in MeCN from the Keggin monomer (POM), PTiW11O40(5-) (2, delta -13.34), upon the addition of 1.5 equiv of H+, via the protonated species, P(TiOH)W11O39(4-) (H2, delta -13.44). The ratio of H1, 2, and H2, which are present in equilibrium in MeCN solution at 25 degrees C, depends on the concentration of both H+ and H2O. The Ti-O-Ti linkage readily reacts with nucleophilic reagents, such as H2O and ROH, to yield monomeric Keggin derivatives. mu-Hydroxo dimer H1 shows higher catalytic activity than 2 for thioether oxidation by hydrogen peroxide in acetonitrile. The reaction proceeds readily at room temperature and affords the corresponding sulfoxide and sulfone in ca. quantitative yield. The addition of H2O2 to H1 or H2 results in the formation of a peroxo complex, most likely the hydroperoxo complex P(TiOOH)W11O39(4-) (I), which has 31P NMR resonance at -12.43 ppm. The rate of the formation of I is higher from H2 than from H1. When H1 is used as a catalyst precursor, the rates of the thioether oxidation and peroxo complex formation increase with increasing H2O concentration, which favors the cleavage of H1 to H2. H2O2 in MeCN slowly converts 2 to another peroxotitanium complex, P(TiO2)W11O39(5-) (II), which has 31P NMR resonance at -12.98 ppm. Peroxo complexes I and II differ in their protonation state and interconvert fast on the 31P NMR time scale. Addition of 1 equiv of H+ completely converts II to I, while 1 equiv of OH- completely converts I to II. 31P NMR confirms that I is stable under turnover conditions (thioether, H2O2, MeCN). Contrary to two-phase systems such as dichloroethane/aqueous H2O2, no products resulting from the destruction of the Keggin POM were detected in MeCN in the presence of H2O2 (a 500-fold molar excess). The reactivity of I, generated in situ from II by adding 1 equiv of H+, toward organic sulfides under stoichiometric conditions was confirmed using both 31P NMR and UV-vis spectroscopy. This is a rare demonstration of the direct stoichiometric oxidation of an organic substrate by a titanium peroxo complex.