Strengthening sapphire at elevated temperatures by SiO2 films

SiO₂ films have been prepared on sapphire by radio frequency magnetron reactive sputtering in order to increase the optical and mechanical properties of infrared windows and domes of sapphire at elevated temperatures. Infrared transmission and flexural strength of uncoated and coated sapphires have been investigated at different temperatures. SiO₂ films were shown to have apparent antireflective effect on sapphire substrate at room temperature. With increasing temperature, the coated sapphires have larger average transmission than the uncoated ones. The temperature was proven to only weakly affect the absorption coefficient and antireflection capability of the deposited films. It is also indicated that the flexural strengths of the c-axis sapphire samples coated with SiO₂ films are increased by 1.2 and 1.5 times than those of uncoated at 600 and 800 °C, respectively.     

Ferroelectric properties of highly c-axis oriented Bi4−xLaxTi3O12 film-based capacitors

Highly c-axis oriented lanthanum-modified bismuth titanate (Bi_4−xLa_xTi₃O₁₂) films having a variety of lanthanum (La) contents were grown on Pt/TiO₂/SiO₂/Si(100) substrates using metal-organic sol deposition and subsequent annealing at 650 °C for 1 h. After systematically examining the ferroelectric properties of Bi_4−xLa_xTi₃O₁₂ films as a function of the La-content, it was concluded that the film with x=0.85 had the largest remanent polarization in the direction parallel to the c-axis. The Pt/Bi_3.15La_0.85Ti₃O₁₂/Pt capacitor showed a well-saturated polarization-electric field (P-E) switching curve with the switching remanent polarization (2P_r) value of 33 μC/cm² and the coercive field (E_c) of 68 kV/cm at an applied voltage of 10 V. More importantly, the capacitor exhibited fatigue-free behavior up to 6.5×10¹⁰ read/write switching cycles at a frequency of 1 MHz. The capacitor also demonstrated an excellent charge-retaining ability and a strong resistance against the imprinting failure.     

Magnetic properties of NdAu2Ge2

Physical properties of NdAu₂Ge₂, crystallising with the tetragonal ThCr₂Si₂-type crystal structure, were investigated by means of magnetic, calorimetric and electrical transport measurements as well as by neutron diffraction. The compound exhibits antiferromagnetic ordering below T_N=4.5 K with a collinear magnetic structure of the AFI-type. The neodymium magnetic moments are parallel to the c-axis and amount to 1.04(4) μ_B at 1.5 K. The observed magnetic behaviour is strongly influenced by crystalline electric field effect.     

c-Axis orientation control of YBa2Cu3O7−x films grown on inclined-substrate-deposited MgO-buffered metallic substrates

Biaxially textured YBa₂Cu₃O_7−x (YBCO) films were grown on non-textured metal substrates with inclined-substrate-deposited (ISD) MgO as template. The biaxial texture feature of the films was examined by X-ray pole-figure analysis, φ-scan, and 2θ-scan. A tilt angle of 32° of the MgO[001] with respect to the substrate normal was observed. Epitaxial growth of YBCO films with c-axis tilt angle of 32° with respect to the substrate normal was obtained on these substrates with SrTiO₃(STO) as buffer layer. Whereas, by choosing yttria-stabilized ZrO₂ and CeO₂ instead of STO as buffer layer, a c-axis untilted YBCO film was obtained. Higher values of T_c=91 K and J_c=5.5×10⁵ A/cm² were obtained on the c-axis untilted YBCO films with 0.46 μm thickness at 77 K in zero field. Comparative studies revealed a unique role of CeO₂ in controlling the orientation of the YBCO films grown on ISD-MgO buffered metal substrates.     

Compositional dependence of ferroelectric properties of highly c-axis oriented Bi4−xNdxTi3O12 film capacitors

Highly c-axis oriented neodymium-modified bismuth titanate (Bi_4−xNd_xTi₃O₁₂) films having a variety of neodymium (Nd) contents were successfully grown on Pt/TiO₂/SiO₂/Si(100) substrates using metal-organic sol decomposition. After systematically examining ferroelectric properties of the c-axis oriented Bi_4−xNd_xTi₃O₁₂ film capacitors as a function of the Nd-content, we concluded that the capacitor with x=0.85 had the largest remanent polarization. The Bi_3.15Nd_0.85Ti₃O₁₂ capacitor fabricated using a top Pt electrode showed well-saturated polarization-electric field (P-E) switching curves with the remanent polarization (P_r) of 51 μC/cm² and the coercive field (E_c) of 99 kV/cm at an applied voltage of 10 V. More importantly, the Pt/Bi_3.15Nd_0.85Ti₃O₁₂/Pt capacitor exhibited fatigue-free behavior up to 4.5×10¹⁰ read/write switching cycles at a frequency of 1 MHz. The capacitor also demonstrated an excellent charge-retaining ability and a strong resistance against the imprinting failure.     

Epitaxial growth and structural characterization of Pb(Fe1/2Nb1/2)O3 thin films

We have grown lead iron niobate thin films with composition Pb(Fe_1/2Nb_1/2)O₃ (PFN) on (0 0 1) SrTiO₃ substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a deposition window which resulted in epitaxial perovskite-phase PFN thin films with no identifiable trace of impurity phases appearing in the X-ray diffractograms. PFN films having thicknesses between 20 and 200 nm were smooth and epitaxially oriented with the substrate and as demonstrated by RHEED streaks which were aligned with the substrate axes. X-ray diffraction showed that the films were completely c-axis oriented and of excellent crystalline quality with low mosaicity (X-ray rocking curve FWHM?0.09°). The surface roughness of thin films was also investigated by atomic force microscopy. The root-mean-square roughness varies between 0.9 nm for 50-nm-thick films to 16 nm for 100-nm-thick films. We also observe a correlation between grain size, surface roughness and film thickness.     

Interface morphologies and magnetization characteristics of Co70Fe30 thin films deposited on conjugated polymer thin films

The surface and interface morphology and magnetization characteristics of Co₇₀Fe₃₀ thin films deposited on bare glass and p-Si/SiO₂ substrates and on conjugated polymer poly(3-hexylthiophene-2,5-diyl) (P3HT) thin films on such substrates have been studied by atomic force microscopy and magneto-optic Kerr effect. It was found that the average absolute magnitude of the coercive field of Co₇₀Fe₃₀ correlates with the roughness of the underlayer prior to Co₇₀Fe₃₀ deposition. P3HT deposited on p-Si/SiO₂ substrates possesses an increased surface roughness as compared to the p-Si/SiO₂ surface, but displays a decreased surface roughness as compared to the one of a bare glass substrate.     

Characteristics of SrBi2Ta2O9 ferroelectric films in an in situ applied low electric field prepared by metalorganic decomposition

SrBi₂Ta₂O₉ (SBT) films were prepared on Pt/TiO₂/SiO₂/Si substrates at 750 °C in oxygen by metalorganic decomposition method. A low electric field was in situ applied during the film crystallization. It was first found that a low electric field and its direction have significant influence on the microstructures and ferroelectric properties of SBT films. Under a positive electric field (assuming that the bottom electrode is electrically grounded), the films show stronger c-axis-preferred orientation than without electric field and under a negative electric field. As a possible origin is proposed that the interface-induced nucleation growth between SBT and Pt coated substrate with application of low electric field plays a key role. Above all, an in situ applied low electric field during the film crystallization is a promising technique controlling film orientation for film preparation by wet chemical method.     

Enhanced ferroelectric property of (Pb0.95Ca0.05)(Nb0.02Zr0.80Ti0.20)O3 thin films prepared by RF magnetron sputtering

(Pb_0.95Ca_0.05)(Nb_0.02Zr_0.80Ti_0.20)O₃ [PCNZT] thin films were deposited on the Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrates by RF magnetron sputtering with and without a LaNiO₃ [LNO] buffer layer. Ca and Nb elements in PZT films enhance the ferroelectric property, LaNiO₃ buffer layer improves the crystal quality of the PCNZT thin films. PCNZT thin films possess better ferroelectric property than that of PZT films for Ca and Nb ion substitution, moreover, PCNZT thin films with a LNO buffer layer possess (1 0 0) orientation and good ferroelectric properties with high remnant polarization (P_r = 38.1 μC/cm²), and low coercive field (E_c = 65 kV/cm), which is also better than that of PCNZT thin films without a LNO buffer layer (P_r = 27.9 μC/cm², E_c = 74 kV/cm). The result shows that enhanced ferroelectric property of PZT films can be obtained by ion substitution and buffer layer.     

Photoluminescence of Si from Si nanocrystal-doped SiO2/Si multilayered sample

A multilayered Si nanocrystal-doped SiO₂/Si (or Si-nc:SiO₂/Si) sample structure is studied to acquire strong photoluminescence (PL) emission of Si via modulating excess Si concentration. The Si-nc:SiO₂ results from SiO thin film after thermal annealing. The total thickness of SiO layer remains 150 nm, and is partitioned equally into a number of sublayers (N = 3, 5, 10, or 30) by Si interlayers. For each N-layered sample, a maximal PL intensity of Si can be obtained via optimizing the thickness of Si interlayer (or d_Si). This maximal PL intensity varies with N, but the ratio of Si to O is nearly a constant. The brightest sample is found to be that of N = 10 and d_Si = 1 nm, whose PL intensity is ∼5 times that of N = 1 without additional Si doping, and ∼2.5 times that of Si-nc:SiO₂ prepared by co-evaporating of SiO and Si at the same optimized ratio of Si to O. Discussions are made based on PL, TEM, EDX and reflectance measurements.     

Ferroelectric properties of neodymium-doped Sr2Bi4Ti5O18 thin film prepared by solgel route

Sr₂Bi₄Ti₅O₁₈ (SBTi) and Nd-modified SBTi (SBNT) thin films were deposited on Pt/Ti/SiO₂/Si (1 0 0) substrates using a sol-gel method. Structure, morphology and electric properties were investigated systematically. These films were randomly oriented and composed of rod-like grains. The remanent polarization (2P_r) and coercive field (E_c) of SBNT films were 30 μC/cm² and 55 kV/cm, respectively. This value of 2P_r was much higher than the reported value of SBTi prepared by pulsed-laser deposition. More importantly, the SBNT films showed high fatigue resistance against continuous switching up to 3×10⁹ cycles and excellent charge-retaining ability up to 3×10⁴ s.     

High Curie temperature in B-site ordered Sr2CrWO6 epitaxial thin films

Epitaxial and c-axis oriented double perovskite Sr₂CrWO₆ thin films were prepared on SrTiO₃ (100) and LaAlO₃ (100) substrates by pulsed-laser deposition. Structural, magnetic and transport properties were found to be sensitive to the gas conditions employed during the deposition. A small amount of oxygen along with Ar during the deposition was found to be essential for B-site ordering; such films displayed lattice parameters close to the bulk value and display ferromagnetic metallic behavior. The Curie temperature observed above 500 K in these films is higher than bulk Sr₂CrWO₆ samples. Films grown without oxygen were observed to have long c-parameter and no B-site ordering; they were non-magnetic and semiconducting.     

Radiation damage effects on power VDMOS devices with composite SiO2–Si3N4 films

Total dose effects and single event effects on radiation-hardened power vertical double-diffusion metal oxide semiconductor (VDMOS) devices with composite SiO₂-–Si₃N₄ film gate are investigated. The relationships among the important electrical parameters of the samples with different thickness SiO₂-–Si₃N₄ films, such as threshold voltage, breakdown voltage, and on-state resistance in accumulated dose, are discussed. The total dose experiment results show that the breakdown voltage and the on-state resistance barely change with the accumulated dose. However, the relationships between the threshold voltages of the samples and the accumulated dose are more complex, not only positive drift, but also negative drift. At the end of the total dose experiment, we select the group of samples which have the smaller threshold voltage shift to carry out the single event effect studies. We find that the samples with appropriate thickness ratio SiO₂-–Si₃N₄ films have a good radiation-hardening ability. This method may be useful in solving both the SEGR and the total dose problems with the composite SiO₂-–Si₃N₄ films.     

Al2O3/SiO2 films prepared by electron-beam evaporation as UV antireflection coatings on 4H-SiC

Al₂O₃/SiO₂ films have been deposited as UV antireflection coatings on 4H-SiC by electron-beam evaporation and characterized by reflection spectrum, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The reflectance of the Al₂O₃/SiO₂ films is 0.33% and 10 times lower than that of a thermally grown SiO₂ single layer at 276 nm. The films are amorphous in microstructure and characterize good adhesion to 4H-SiC substrate. XPS results indicate an abrupt interface between evaporated SiO₂ and 4H-SiC substrate free of Si-suboxides. These results make the possibility for 4H-SiC based high performance UV optoelectronic devices with Al₂O₃/SiO₂ films as antireflection coatings.     

Embedded structure of silicon monoxide in SiO2 films

The structure of SiO_x (x = 1.94) films has been investigated using both X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The SiO_x films were deposited by vacuum evaporation. XPS spectra show that SiO_1.94 films are composed of silicon suboxides and the SiO₂ matrix. Silicon clusters appeared only negligibly in the films in the XPS spectra. Si₃O⁺ ion species were found in the TOF-SIMS spectra with strong intensity. These results reveal the structure of the films to be silicon monoxide embedded in SiO₂, and this structure most likely exists as a predominant form of Si₃O₄. The existence of Si-Si structures in the SiO₂ matrix will give rise to dense parts in loose glass networks.     

Magnetic behavior and structural feature of quasi-one-dimensional BaCu2V2O8 crystal

Magnetic properties of BaCu₂V₂O₈ single crystals obtained by the spontaneous nucleation method using V₂O₅ as a self-flux are investigated. Singlet ground states with spin gaps of 215 and 223 K are observed along the directions parallel and perpendicular to the c-axis of the crystal, respectively, being in good agreement with powder sample measurements. Reinvestigation of the crystal structure reveals that the whole structural framework of BaCu₂V₂O₈ crystal can be described as an assembly of alternating chains, which are built by edge-sharing pairs of CuO₄ square-plaquettes and VO₄ tetrahedra along the c-axis. The magnetic nature of BaCu₂V₂O₈ is well understood based on this structural interpretation.     

Neutron diffraction study of magnetic ordering in PrCu2Si2, PrCu2Ge2, PrFe2Ge2 and NdFe2Ge2

A neutron diffraction study of polycrystalline PrCu₂Si₂ [1], PrCu₂Ge₂ [2], PrFe₂Ge₂ [3] and NdFe₂Ge₂ [4] intermetallics carried out at liquid helium temperature shows the presence of a collinear antiferromagnetic order below T_N = 19 ± 1 K [1], T_N = 16 ± 1 K [2], T_N = 9 ± 1 K [3] and 13 ± 1 K [4]. Magnetic moment, parallel to the c-axis is localized on RE ions only. The magnetic structure of these compounds consists of ferromagnetic layers perpendicular to the c-axis coupled antiferromagnetically with sequence +-+- for PrCu₂Si₂ and PrCu₂Ge₂ and +--+ for PrFe₂Ge₂ and NdFe₂Ge₂. The RE moments amount close to the free ion values for Fe containing compounds but are smaller in those containing Cu suggesting a fairly strong influence of crystal field.     

EPR studies of linewidth anomalies at phase transitions in [N(C2H5)4]2MnCl4

We have studied [N(C₂H₅)₄]₂MnCl₄ crystal by X-band CW EPR spectra in the temperature range 170-300 K. The angular dependences of linewidth ΔH were measured and described in the light of a double-layer system (2D) with exchange interactions. Two temperature anomalies of linewidth ΔH were found at T₁=225 K and T₂=192 K on cooling. Different behaviors of ΔH anomalies recorded for an external magnetic field parallel and perpendicular to the ab crystallographic plane indicate ordering/disordering of MnCl₄ groups in this plane and their displacement along the c-axis which occurs in the temperature of about 225 K.     

Laser-induced voltage characteristics of Bi2Sr2Co2Oy thin films on LaAlO3 substrates

We report the laser-induced voltage (LIV) effects in c-axis oriented Bi₂Sr₂Co₂O_y thin films grown on (0 0 1) LaAlO₃ substrates with the title angle α of 0°, 3°, 5° and 10° by a simple chemical solution deposition method. A large open-circuit voltage with the sensitivity of 300 mV/mJ is observed for the film on 10° tilting LaAlO₃ under a 308 nm irradiation with the pulse duration of 25 ns. When the film surface is irradiated by a 355 nm pulsed laser of 25 ps duration, a fast response with the rise time of 700 ps and the full width at half maximum of 1.5 ns is achieved. In addition, the experimental results reveal that the amplitude of the voltage signal is approximately proportional to sin 2α and the signal polarity is reversed when the film is irradiated from the substrate side rather than the film side, which suggests the LIV effects in Bi₂Sr₂Co₂O_y thin films originate from the anisotropic Seebeck coefficient of this material.     

Effects of H2 ambient annealing in fully 0 0 2-textured ZnO:Ga thin films grown on glass substrates using RF magnetron co-sputter deposition

Gallium doped zinc oxide (ZnO:Ga) thin films were grown on glass substrates using RF magnetron co-sputtering, followed by H₂ ambient annealing at 623 K to explore a possibility of steady and low-cost process for fabricating transparent electrodes. While it was observed that the ZnO:Ga thin films were densely packed c-axis oriented self-textured structures, in the as-deposited state, the films contained Ga₂O₃ and ZnGa₂O₄ which had adverse effect on the electrical properties. On the other hand, post-annealing in H₂ ambient improved the electrical properties significantly via reduction of Ga₂O₃ and ZnGa₂O₄ to release elemental Ga which subsequently acted as substitutional dopant increasing the carrier concentration by two orders of magnitude. Transmittance of the ZnO:Ga thin films were all over 90% that of glass while the optical band gap varied in accordance with the carrier concentrations due to changes in Fermi level. Experimental observation in this study suggests that transparent conductive oxide (TCO) films based on Ga doped ZnO with good electrical and optical properties can be realized via simple low-cost process.