Mixed 2D molecular systems: Mechanic, thermodynamic and dielectric properties

Study of Langmuir monolayers consisting of stearic acid (SA) and dipalmitoylphosphatidylcholine (DPPC) molecules was done by surface pressure-area isotherms (π-A), the Maxwell displacement current (MDC) measurement, X-ray reflectivity (XRR) and atomic force microscopy (AFM) to investigate the selected mechanic, thermodynamic and dielectric properties based on orientational structure of monolayers. On the base of π-A isotherms analysis we explain the creation of stable structures and found optimal monolayer composition. The dielectric properties represented by MDC generated monolayers were analyzed in terms of excess dipole moment, proposing the effect of dipole-dipole interaction. XRR and AFM results illustrate deposited film structure and molecular ordering.     

Monolayer characteristics of stereoregular PMMA at the air/water interface

Behaviors of isotactic, atactic and syndiotactic poly(methyl methacrylate) (PMMA) monolayers at the air/water interface were investigated. The monolayer characteristics of the three stereoisomers were studied and compared in terms of surface pressure-area per molecule (π-A) isotherm, hysteresis and relaxation phenomena, and the phase images observed from Brewster angle microscopy (BAM). The results show that iPMMA monolayer has a more extended and compressible property, and exhibits pronounced hysteresis and relaxation phenomena among the three tactic PMMAs. Such characteristics can reasonably be attributed to the higher flexibility of chains segments of iPMMA as estimated from its lower T_g. On the other hand, sPMMA, the one with the highest T_g, forms a more condensed monolayer due to the high cohesive interaction among polymer chains. The BAM images show that PMMA molecules are not well extended on the subphase and thus, aggregative phases were observed even in a state corresponding to the gas phase. The aggregative structures are especially significant on sPMMA monolayer, which is consistent with the results estimated from the π-A isotherms. When the temperature is elevated from 25 to 40 °C, all the monolayers of the three stereoisomers become more expanded and compressible due to the increase in chain flexibility.     

二次谐波光谱和布鲁斯特角显微镜研究二棕榈酰磷脂酰胆碱和维生素B2的相互作用

二棕榈酰磷脂酰胆碱（DPPC）分子在气液界面上形成的Langmuir膜是一种重要的生物膜模拟体系,其手性结构及其与外来物质的相互作用一直是相关学科研究的前沿问题。维生素B₂（VB₂）是人体中一种重要的营养物质,它在代谢障碍引起的脂质沉积性类疾病中有大量的实例应用,经常在一些特殊的临床症状中有出乎意料的治疗奇效。目前,VB₂如何参与到膜上生物事件的过程和细胞乃至生命的作用过程中的研究报道较少,特别是VB₂分子与磷脂分子靶标的立体相互作用,其可能发生的手性分子识别现象会在许多生物事件中起着关键作用。综合二次谐波-线二色光谱（SHG-LD）、Langmuir膜天平和布鲁斯特角显微镜(BAM)技术初步研究了VB₂和DPPC分子在气液界面上的相互作用,分别从气液界面上介观水平和宏观水平上互补表征脂质分子在气液界面上的分子骨架自组装的结构。压缩等温线发现纯水界面L-DPPC和D-DPPC液态扩展相/液态凝聚相(LE/LC)共存阶段的膜压几乎不变,race-DPPC的共存相膜压区域稍微缩短,VB₂水溶液界面上race-DPPC的LE/LC共存相消失。此外,弹性模量研究表明VB₂分子可以提高L-DPPC单分子层膜的弹性模量,但降低D-DPPC和race-DPPC单层膜的弹性模量。结合SHG-LD研究发现,在膜压13 mN·m-1下,L-DPPC在纯水和VB₂水溶液界面上表面手性过量值（DCE）保持不变。与纯水界面相比较,D-DPPC在VB₂水溶液上DCE值出现反转,而race-DPPC的DCE值则不随亚相改变而变化。相同膜压下,BAM观察到单一手性相互作用使得L-DPPC和D-DPPC在纯水界面上各自组装成不同枝臂弯曲方向的手性三叶草微畴(microdomain)。VB₂诱导D-DPPC微畴,使其直径增大1～2倍。同时,VB₂也诱导了race-DPPC单层膜上近似圆形状的微畴伸展,并长出了三条有曲率的枝臂。对此可以解释为VB₂降低了非单一手性相互作用的能量,使得race-DPPC出现手性相分离。与此同时,VB₂也诱导了race-DPPC单层膜微畴的手性结构发生变化。该研究有助于理解VB₂调节磷脂膜横向组织结构的分子机理,在细胞膜界面发生的过程中,脂层单层的二维特性和生物分子之间的相互作用可能决定了生物分子的亲和力。     

Kinetics of slow collapse process: Thermodynamic description of rate constants

Insoluble monolayer formed at the air/water interface compressed at a surface pressure above the equilibrium spreading pressure is unstable. In presented paper the classical theory for homogeneous nucleation is modified adding the activation energy term. It allows quantitative thermodynamic interpretation of the slow collapse phase transformation. The collapse of stearic acid Langmuir films has been carried out by systematic measurements of the area loss-time isobaric dependencies at various temperatures and isothermal dependencies at various pressures. Activation energies (activation enthalpies) and activation entropies have been evaluated for the nucleation (E_α = 1.32 eV) and the growth (E_β = 1.55 eV) processes. The experimental data for various pressures are discussed on the basis of the Gibbs energy analysis.     

Effects of surface concentration on the porphine monolayers: Molecular simulations at the nanoscale water-gas interface

The effect of surface concentration on the structure and stability of porphine (PH₂) monolayers at the water-gas interface was studied by using molecular dynamics simulation. Five monolayer systems having different surface concentrations were investigated in order to cover a full range of the experimental π-A isotherm. The simulation results show that increment of a number of the PH₂ molecules not only affects the significantly decreasing water density at the interface but also the monolayer surface tensions. The calculated surface tensions of the five systems indicate that the monolayer phase transfer corresponding to gaseous, expanded, condensed, and collapsed phases are observed. The hydrogen bonding between water and the PH₂ molecules at the interface plays an important role on the monolayer film formation, especially at the lower surface concentrations. The PH₂ orientations for all surface concentrations, except the highest one, are favored to be the β-structure as observed in the copper porphyrazine (CuPz) monolayer.     

Analysis of the induction of the myelin basic protein binding to the plasma membrane phospholipid monolayer

Myelin basic protein(MBP) is an essential structure involved in the generation of central nervous system(CNS)myelin.Myelin shape has been described as liquid crystal structure of biological membrane.The interactions of MBP with monolayers of different lipid compositions are responsible for the multi-lamellar structure and stability of myelin.In this paper,we have designed MBP-incorporated model lipid monolayers and studied the phase behavior of MBP adsorbed on the plasma membrane at the air/water interface by thermodynamic method and atomic force microscopy(AFM).By analyzing the pressure–area(π–A) and pressure–time(π–T) isotherms,univariate linear regression equation was obtained.In addition,the elastic modulus,surface pressure increase,maximal insertion pressure,and synergy factor of monolayers were detected.These parameters can be used to modulate the monolayers binding of protein,and the results show that MBP has the strongest affinity for 1,2-dipalmitoyl-sn-glycero-3-phosphoserine(DPPS) monolayer,followed by DPPC/DPPS mixed and1,2-dipalmitoyl-sn-glycero-3-phospho-choline(DPPC) monolayers via electrostatic and hydrophobic interactions.AFM images of DPPS and DPPC/DPPS mixed monolayers in the presence of MBP(5 n M) show a phase separation texture at the surface pressure of 20 m N/m and the incorporation of MBP put into the DPPC monolayers has exerted a significant effect on the domain structure.MBP is not an integral membrane protein but,due to its positive charge,interacts with the lipid head groups and stabilizes the membranes.The interaction between MBP and phospholipid membrane to determine the nervous system of the disease has a good biophysical significance and medical value.     

Temperature effect on thin lipid film elasticity and phase separation: insights from Langmuir monolayer and fluorescence microscopy techniques

Langmuir monolayer pressure isotherms and compressibility modulus measurements of phospholipid mixtures in several Langmuir monolayer systems at the air/water interface were investigated in this study. The ultimate aim was to carry out a comparison of the elasticity modulus for monolayers with different mixtures of l,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), l,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and chicken egg yolk sphingomyelin (eSM), in the presence/absence of cholesterol (Chol). In particular, we were able to propose that the leading force beyond the phase separation into liquid expanded (LE-) and liquid condensed (LC-) phases emerges from the increasing barrier to incorporate DOPC molecules into a highly ordered LC-phase. In addition, our findings suggest that DOPC lipid molecules have a priority to incorporate in a disordered LE-phase, while DPPC and eSM prefer the ordered one. Also, Chol seems to split almost equally into both phases, indicating that Chol has no priority for either phase and there are no particular interactions between Chol and saturated lipid molecules.     

Mixed micellization study of ibuprofen (sodium salt) and cationic surfactant (conventional as well as gemini)

Herein, we have studied the interaction between cationic surfactant (conventional [myristyltrimethylammonium bromide, MTAB] as well as gemini surfactant 1, 4‐butanediyl‐α, ω‐bis(dimethyltetradecylammonium bromide) (14‐4‐14)) and anti‐inflammatory sodium salt of ibuprofen (IBU) drug in aqueous solutions by using tensiometry method at 298.15 K. The means of the interaction of drugs by added foreign materials is of paramount importance in the drug delivery. Ibuprofen is used for the relief of pain, fever, and swelling. From this study we have evaluated different parameters, for example, critical micelle concentration (cmc), micellar mole fraction of mixed micelles/mixed interface (X₁^m/X₁^σ), micellar/surface interaction parameter (β^m/β^σ), activity coefficients (f₁^m/f₁^σ and f₂^m/f₂^σ) of the mixed micelles/mixed interface, excess Gibbs free energy of mixed monolayer/mixed micelle formation ( $\mathrm{\Delta }{G}_{\mathrm{ex}}^{\mathrm{\sigma }}$/ $\mathrm{\Delta }{G}_{\mathrm{ex}}^{\mathrm{m}}$), surface excess concentration (Γ_max) etc. and discussed in detail. The micellar interaction parameter (β^m) was determined from the critical micelle concentration values of the pure surfactant (MTAB/14‐4‐14) and IBU (cmc₁ and cmc₂) and the mixed system (cmc) using the Rubingh's model. In addition to this, various other parameters such as packing parameters of amphiphiles in the micelles (P), volume contribution of the hydrophobic chain (V₀), and its effective length (l_c), have also been calculated. The value of micellar mole fraction ( $X_1^{\mathrm{m}}$) is found to be more for IBU + 14‐4‐14 mixtures as compared to IBU + MTAB mixtures at lower mole fraction and vice versa at a higher mole fraction of surfactant. The ΔG^o_m and ΔG^o_ads values for all studied systems were found out to be negative, ie, micellization, as well as adsorption processes, are found to be energetically favorable.     

Effects of Calcium Ions on Thermodynamic Properties of Mixed Bilirubin/Cholesterol Monolayers

通过?-A等温线研究了含钙离子浓度不同的水溶液亚相上胆红素/胆固醇混合单分子膜的性质．在此基础上,采用数学方法计算了不同亚相上单分子膜的平均单分子面积、崩溃压、表面压缩系数、超额单分子面积、混合自由能和超额自由能．结果表明,在钙离子溶液亚相上混合单分子膜的结构发生扩张,并且在界面上形成非理想混合单分子膜．与理想混合时相比,这种混合单分子膜在超额单分子面积上表现为明显的正偏差．在纯水亚相上,胆红素与胆固醇的摩尔比为3:2时混合单分子膜为热力学最稳定体系．但是在钙离子浓度逐渐增大的亚相中,这种摩尔比的混合单分子膜热力学稳定性被破坏,即混合单分子膜中的不同组分间自发混合能力下降,这是由于受到钙离子与胆红素和胆固醇之间配位作用的影响．此外,在钙离子溶液亚相中,在较低的表面压下制备出的混合膜具有更好的热力学稳定性．     

Charge transfer complex formation at the air-water interface “in situ” studied by means of UV-vis reflection spectroscopy

Positively ionized monolayers of a viologen derivative, namely 1,1′-dioctadecyl-4,4′-bipyridilium (C₁₈V²⁺), were prepared onto aqueous solutions of a tetracyanoquinodimethanide salt, , where the tetracyanoquinodimethanide anions are in a mixed valence state. UV-vis reflection spectroscopy has been used for proving in situ the incorporation of tetracyanoquinodimethanide anions into the viologen monolayer. The UV-vis spectra clearly show the presence of a band in the 550-850 nm region that is not visible in viologen monolayers fabricated onto a pure water subphase. Moreover, a charge-transfer interaction between the two molecules occurs at the air-water interface. A simultaneous quantitative analysis of the two active molecules in the UV-vis region has facilitated the investigation of the viologen tetracyanoquinodimethanide hybrid monolayers. An organization model at the air-water interface consistent with the reflection spectroscopy data has been proposed where a parallel arrangement of the viologen dications and anions is assumed. The ratio of the two materials in the monolayer was also determined and resulted to be , i.e. stoichiometry of charges. This ratio decreases after a noticeable kink in the π-A isotherm, and has been interpreted as a reorganization of the molecules in the monolayer leading to an ejection of some ions from the interface to the subphase, probably due to steric hindrance.     

Solvent effect on the formation of self-assembled monolayer on DLC surface between n-hexane and Vertrel XF

Self-assembled monolayers of 1H,1H,2H,2H-perfluorodecyltrichloro-silane (FDTS) have been deposited on the diamond-like carbon (DLC) film-coated magnetic heads with two different solvents, n-hexane and Vertrel XF. In order to investigate the solvent effect on the monolayer formation, a series of FDTS monolayers were prepared by varying the solution concentrations which were respectively characterized by time-of-flight mass spectroscopy, contact angle measurements and atomic force microscopy. Results showed that high density of aggregations were present for the FDTS monolayers using the n-hexane solvent, while the monolayer formed on the DLC surface using the Vertrel XF solvent exhibited excellent quality and reproducibility and no aggregations were observed.     

Effects of multi-frequency power ultrasound on the enzymolysis of corn gluten meal: Kinetics and thermodynamics study

The effects of multi-frequency power ultrasound (MPU) pretreatment on the kinetics and thermodynamics of corn gluten meal (CGM) were investigated in this research. The apparent constant (K_M), apparent break-down rate constant (k_A), reaction rate constants (k), energy of activation (E_a), enthalpy of activation (ΔH), entropy of activation (ΔS) and Gibbs free energy of activation (ΔG) were determined by means of the Michaelis–Menten equation, first-order kinetics model, Arrhenius equation and transition state theory, respectively. The results showed that MPU pretreatment can accelerate the enzymolysis of CGM under different enzymolysis conditions, viz. substrate concentration, enzyme concentration, pH, and temperature. Kinetics analysis revealed that MPU pretreatment decreased the K_M value by 26.1% and increased the k_A value by 7.3%, indicating ultrasound pretreatment increased the affinity between enzyme and substrate. In addition, the values of k for ultrasound pretreatment were increased by 84.8%, 41.9%, 28.9%, and 18.8% at the temperature of 293, 303, 313 and 323 K, respectively. For the thermodynamic parameters, ultrasound decreased E_a, ΔH and ΔS by 23.0%, 24.3% and 25.3%, respectively, but ultrasound had little change in ΔG value in the temperature range of 293–323 K. In conclusion, MPU pretreatment could remarkably enhance the enzymolysis of CGM, and this method can be applied to protein proteolysis industry to produce peptides.     

Surface‐enhanced Raman scattering study of monolayers formed from mixtures of 4–mercaptobenzoic acid and various aromatic mercapto‐derivative bases

Monolayers formed from aromatic compounds have many potential applications, for example in construction of bioelectronic elements having high efficiency of electron transfer. In this paper, the composition of monolayers formed on silver surfaces from mixtures of 4‐mercaptobenzoic acid (MBA) and four model (stable and easily available) aromatic thiols with strong base properties: 4,6‐diamino‐2‐mercaptopyrimidine (APY), 1H‐1,2,4‐triazole‐3‐thiol (HTR), 4‐methyl‐4H‐1,2,4‐triazole‐3‐thiol (MTR) and 3‐amino‐1,2,4‐triazole‐5‐thiol (ATR), were determined from surface‐enhanced Raman scattering (SERS) measurements. Our investigations showed that among studied aromatic bases, APY is the most promising candidate for the formation of mixed monolayers with MBA. In the whole pH range studied (2–12.5), mixed MBA + APY monolayers with similar surface concentration of both components are formed during the adsorption from the 0.5 mM MBA + 0.5 mM APY aqueous solution. Desorption of MBA and APY from the mixed monolayer is, however, significantly different. During immersion in water, surface concentration of APY decreases significantly faster than MBA (a significant part of the adsorbed MBA molecules is present on the silver surface even after 2 h of soaking in water). Presence of chlorides, bovine serum albumin or laccase in the surrounding solution does not observably influence the structure of MBA + APY monolayers. The properties of monolayers formed from MBA and substituted triazoles were found to be significantly different than those of MBA + APY monolayers. Copyright © 2009 John Wiley & Sons, Ltd.     

The effect of interface states, excess capacitance and series resistance in the Al/SiO2/p-Si Schottky diodes

The current-voltage (I-V) characteristics of Al/SiO₂/p-Si metal-insulator-semiconductor (MIS) Schottky diodes were measured at room temperature. In addition the capacitance-voltage (C-V) and conductance-voltage (G-V) measurements are studied at frequency range of 10 kHz-1 MHz. The higher value of ideality factor of 3.25 was attributed to the presence of an interfacial insulator layer between metal and semiconductor and the high density of interface states localized at Si/SiO₂ interface. The density of interface states (N_ss) distribution profile as a function of (E_ss − E_v) was extracted from the forward bias I-V measurements by taking into account the bias dependence of the effective barrier height (Φ_e) at room temperature for the Schottky diode on the order of ≅4 × 10¹³ eV⁻¹ cm⁻²_. These high values of N_ss were responsible for the non-ideal behaviour of I-V and C-V characteristics. Frequency dispersion in C-V and G-V can be interpreted only in terms of interface states. The N_ss can follow the ac signal especially at low frequencies and yield an excess capacitance. Experimental results show that the I-V, C-V and G-V characteristics of SD are affected not only in N_ss but also in series resistance (R_s), and the location of N_ss and R_s has a significant on electrical characteristics of Schottky diodes.     

Theoretical study of keto–enol tautomerism by quantum mechanical calculations (the QM/MC/FEP method)

In this study, the tautomeric equilibrium between the keto and enol forms has been studied for five typical ketones and aldehydes: i‐butanal, acetaldehyde, acetone, acetylacetone, and dimedone. The level of theory used in the gas‐phase calculation was Becke, three‐parameter, Lee–Yang–Parr/6‐311G(d,p)//Becke, three‐parameter, Lee–Yang–Parr/6‐31G(d). The free energies of solvation were included in the calculation by using the free‐energy perturbation method based on Monte Carlo simulation, that is, the quantum mechanical/Monte Carlo/free‐energy perturbation method. Three different models, incorporating no‐water, one‐water, and two‐waters, were adopted. The results showed that in the gas phase the addition of water molecules to the reaction mechanism caused the activation barriers (ΔG^?_gas) to decrease by half relative to the water‐free mechanism, but there was no effect on the relative difference in free energy, ΔG_gas. The solvation effects (ΔG_sol), based on quantum mechanical/Monte Carlo/free‐energy perturbation calculations, were added to those of the gas‐phase results of the one‐water and two‐waters models. The two‐waters model produced values that were very consistent with the experimental data for all of the tautomers. The differences in the relative Gibbs free energy (ΔG_rxn) were less than 1.0 kcal mol^–1. In summary, the inclusion of solvent molecules in gas‐phase calculations plays a very important role in producing results consistent with experimental data. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect on alloying at the Fe/Ni(001) interfaces on the interlayer exchange coupling

We investigate the stability of various ordered FeNi alloys at the interfaces of Fe/Ni superlattices by using ab initio density functional calculation. We consider an Fe_0.5Ni_0.5 ordered alloy of one or two monolayers thick at different positions beyond the interface and the possibility of an interdiffusion of a complete monolayer of Ni(Fe) in Fe(Ni) slab. An interfacial atomic layer of Fe_0.5Ni_0.5 exchanged with its adjacent Ni monolayers, leading to a buffer zone of Ni₃Fe composition is found to be the most stable structural configuration. For this atomic arrangement we investigate the magnetic profile and the resulting interlayer exchange coupling between the Ni slabs for Fe spacer thickness of 0 to 4 monolayers.     

Band discontinuity in GaAs/AlAs superlattices with InAs strained insertion-layers

We have theoretically investigated the valence-band discontinuity (ΔE_v) at the (100) GaAs/AlAs interface with the InAs strained insertion-layer. The theoretical calculation is carried out by the self-consistent tight-binding method with the sp³s* basis in the (GaAs)₅/(InAs)₁/(AlAs)₅/(InAs)₁ [100] superlattice. ΔEv at the GaAs/InAs(1ML)/AlAs interface is calculated to be 0.50 eV, which is practically equal to ΔEv = 0.51 eV at the GaAs/AlAs interface with no InAs layers. The insertion of the InAs monolayer changes the detail of valence charge density at the GaAs/AlAs interface but does not change ΔE_v. The result of calculation is in consistent with our experimental measurement by using the x-ray photoelectron spectroscopy.     

Immiscibility in the Fe3O4-FeCr2O4 spinel binary

A recent thermodynamic model of mixing in spinel binaries, based on changes in cation disordering (x) between tetrahedral and octahedral sites [Am. Mineral. 68 (1983) 18, 69 (1984) 733], is investigated for applicability to the Fe₃O₄-FeCr₂O₄ system under conditions where incomplete mixing occurs. Poor agreement with measured consolute solution temperature and solvus [N. Jb. Miner. Abh. 111 (1969) 184] is attributed to neglect of: (1) ordering of magnetic moments of cations in the tetrahedral sublattice antiparallel to the moments of those in the octahedral sublattice and (2) pair-wise electron hopping between octahedral site Fe³⁺ and Fe²⁺ ions. Disordering free energies (ΔG_D), from which free energies of mixing are calculated, are modeled by

     

Preparation and study of complex self-assembled film as a super-thin barrier on silver

A self-assembled monolayers (SAMs) of (3-mercaptopropy) trimethoxysilane (3-MPT) chemisorbed on silver surface was chemically modified by 1-octadecanethiol (C₁₈H₃₇SH) (to form self-assembled mixed-monolayer (SAMM)) and the co-polymer of N-vinylcarbazole and methyl methacrylate ester to form complex self-assemblied film (CSAF). The combinative state of interface between SAMs (or SAMM) and co-polymer were characterized by dynamic mechanical thermal analysis (DMTA). The thickness of film on Ag was characterized by X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) measurements in 10% NaOH aqueous solution with the silver surface and covered with film indicated that 3-MPT SAMs modified with C₁₈H₃₇SH and then with co-polymer have higher capability against oxidation.