Extractive spectrophotometric determination of dioxouranium(VI) with the sodium salt of hexamethyleneiminecarbodithioate

The optimum conditions for the extractive spectrophotometric determination of dioxouranium(VI) with hexamethyleneiminecarbodithioate(HMICdt) have been established. Dioxouranium(VI) reacts with this ligand at pH 4.5 to form a yellowish-orange uncharged 12 metal-ligand complex which can be extracted by chloroform. The calibration graph was linear in the range of 1–20 g ml^–1 of dioxouranium(VI) at 335 nm. The molar absorptivity of the extracted species is 5.952×10³ l mol^–1 cm^–1 with Sandell's sensitivity of 0.04 g cm^–2. The average of 10 determinations of dioxouranium was 49.75 g for the samples containing 50 g of U(VI) and the variation from the mean at 95% confidence limit was 49.75±0.5955.     

Solvent extraction and spectrophotometric including graphite furnace atomic absorption determination of molybdenum in the environment

A selective and sensitive method for the extraction and microgram determination of molybdenum (VI) with hydroxamic acid as yellow molybdenum-hydroxamate complex from acidic medium is described. The molybdenum-PCPPSAHA complex has _max 388 nm, molar absorptivity 5.0 × 10³l mol^–1 cm^–1. The system obeys Beer's law in the range of 1–28 g/ml of molybdenum(VI). Sandell's sensitivity is 0.0192 g cm² and stoichiometry of the complex is 12, molybdenum: PCPPSAHA while mixed complex molybdenum-PCPPSAHA-morin has _max 400 nm and molar absorptivity 5.9 × 10³lmo1^–1 cm^–1 and stoichiometry of the complex is 121.The molybdenum is determined by graphite furnace atomic absorption spectrophotometry after directly pipetted the extract into the furnace which increases the sensitivity 20 fold.     

Study of Cr(VI)-2-oximinodimedone dithiosemicarbazone reaction and simultaneous determination of Cr(VI) and Fe(III)

Summary 2-Oximinodimedone dithiosemicarbazone reacts with Cr(VI) in strongly acid medium. The orange colour obtained has been used to propose a spectrophotometric method of Cr(VI) determination in the concentration range 0.40–9.5g ml^–1 (=5600 mole^–1-cm^–1 at 485 nm). The stoichiometry of the reaction is 32 (reagentCr(VI)) which is in accordance with the oxidation reaction of the reagent by Cr(VI). The method has been applied to the determination of Cr(VI) and Fe(III) in ceramic materials.

---

Eine Studie zur Cr(VI)-2-oximinodimedondithiosemicarbazon-Reaktion und die simultane Bestimmung von Cr(VI) und Fe(III)

Zusammenfassung 2-Oximinodimedonedithiosemicarbazon reagiert in stark saurem Milieu mit Cr(VI). Die orange Farbe kann im Konzentrationsbereich von 0.4–9,5g/ml zur spektrophotometrischen Cr(VI)-Bestimmung verwendet werden (=5600 1 mol^–1cm^–1bei 485 nm). Die Stöchiometrie der Reaktion ist 32 (Reagens: Cr(VI)) und entspricht der Oxidation des Reagens durch Cr(VI). Die Methode wurde zur Bestimmung von Cr(VI) und Fe(III) in keramischen Materialien eingesetzt.

     

Catalymetric trace determination of molybdenum(VI) based on a Landolt type peroxoborate-iodide reaction using an ion-selective electrode

Summary Trace amounts of molybdenum(VI) have been determined by means of its catalytic effect on the peroxoborate-iodide reaction in acidic medium. The indicator reaction is transformed to a Landolt reaction by the addition ofl-ascorbic acid which reduces iodine to iodide. The end-point of the reaction (decrease of iodide) is potentiometrically monitored by the aid of an iodide ion-selective electrode. The relationship between the time required to reach the end-point (t in seconds) and the concentration of molybdenum(VI) was found to be 1/t=4.79 [Mo(VI)]+0.598 in the range of 0.5–5.0 M Mo(VI). Tungsten(VI) interferes. The method has been applied to the determination of molybdenum(VI) in sea water after its concentration by the chelating resin Chelex-100 (standard deviation 0.52 g/l for 8.62 g Mo/l).

---

Katalymetrische Bestimmung von Molybdän(VI)spuren durch die Landoltsche Peroxoborat-Iodid-Reaktion mit Hilfe der Iodid-Elektrode

Zusammenfassung Das Verfahren beruht auf der katalytischen Wirkung des Molybdäns auf die Peroxoborat-Iodid-Reaktion. Durch Zugabe einer definierten Menge von Ascorbinsäure, die das zunächst entstehende Iod sofort reduziert, wird eine Landolt-Reaktion aufgebaut. Der Endpunkt (Verminderung an Iodid) wird potentiometrisch mit der Iodid-Elektrode indiziert. Zwischen der Zeitdauer bis zum Endpunkt (t in Sekunden) und der Molybdänkonzentration besteht die Beziehung 1/t=4,79 [Mo(VI)]+0,598 im Bereich von 0,5–5,0 M Mo(VI). Wolfram(VI) stört. Molybdän kann nach diesem Verfahren in Meerwasser nach Konzentration am Chelationenaustauscher Chelax-100 bestimmt werden (Standardabweichung 0,52 g/l für 8,62 g Mo/l).

     

Saure Hydrolyse von 2-(4-Chlorphenylazo)-2-(N-carbamidino-ureido)-propan

Zusammenfassung Die saure Hydrolyse der Arylazo-Verbindung1 wird beschrieben und interpretiert: Als Zwischenprodukte werden ungeladenes Aryldiazen (Ar–N=N–H) sowie zwitterionisches Aryldiazen (Ar–NH⁺=N:^–)und im weiteren Verlauf des Reaktionsgeschehens 1,4-Diaryltetrazenimionen postuliert.

---

Acid hydrolysis of 2-(4-Chlorophenylazo)-2-(N-carbamidinoureido)-propane

Acid hydrolysis of the arylazo compound1 is described and discussed. As reaction intermediates uncharged aryldiazene (Ar–N=N–H) as well as zwitterionic aryldiazene (Ar–NH⁺=N:^–) and subsequently 1.4-diaryltetrazenium ions are postulated.

     

Kinetic-spectrophotometric determination of molybdenum (VI) and tungsten (VI) in mixtures

A simple kinetic-spectrophotometric method is described for the determination of molybdenum(VI) and tungsten(VI) in mixtures, without prior separation. The method is based on the catalytic effect of molybdenum(VI) and tungsten(VI) on the oxidation of 2,4-diaminophenol dihydrochloride (DAP) by hydrogen peroxide in acidic medium. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance with time at 500 nm. A partial inhibition in the catalytic activity of each catalyst, when the other one is present, at all ratios of Mo(VI) W(VI) mixtures studied was observed. On the other hand, the catalytic activity of tungsten(VI) dropped to zero whilst that of molybdenum(VI) decreased slightly, in the presence of citrate ions. Two sets of experiments were carried out, the first in the absence and the other in the presence of citrate, and the resolution of Mo(VI)/W(VI) mixtures was achieved by solving two simultaneous equations. Various molar ratios of Mo(VI) W(VI), at the 10^–6 M level, from 0.2 1 to 5 1 can be determined with satisfactory precision and accuracy. The selectivity of the method was investigated and the method was applied successfully to the determination of molybdenum and tungsten in each other's presence in steel.     

A kinetic determination of ultramicro quantities of manganese(II), molybdenum(VI) and tungsten(VI) on the basis of their catalytic action on the oxidation of Azorubin S by hydrogen peroxide

Summary A study has been made of the kinetics of catalytic oxidation of Azorubin S by hydrogen peroxide in the presence of Mn(II), Mo(VI) and W(VI) in order to find optimal conditions for the kinetic catalytic determination of these elements. Manganese(II), molybdenum(VI) and tungsten(VI) were determined in the concentration ranges 5.5–33.0×10^–3, 1.3–8.1 and 5.9–44.1g/ml, respectively. Standard deviations were less than 11%. The effect of some foreign ions on these determinations was also investigated.

---

Zusammenfassung Die Kinetik der katalytischen Oxydation von Azorubin S mit Wasserstoffperoxid in Anwesenheit von Mn(II), Mo(VI) und W(VI) wurde untersucht, um die optimalen Bedingungen für deren kinetisch-katalytische Bestimmung zu finden. Mn(II) wurde im Konzentrationsbereich von 5,5–33,0×10^–3, Mo(VI) von 1,3–8,1 und W(VI) von 5,9–44,1g/ml mit Standardabweichungen <11% bestimmt. Außerdem wurden einige der möglichen Störungen untersucht.

---

---

This work was presented in part at the 20th Annual Meeting of the Serbian Chemical Society, Belgrade, January 17, 1977.     

Effect of Surfactants on the Immobilization of 4-(2-Pyridylazo)resorcinol on Silochroms

The effect of cationic surfactants (cetyltrimethylammonium bromide, cetylpyridinium bromide, and tetrabutylammonium perchlorate) and a nonionic surfactant (OP-7) on the conditions of the immobilization of 4-(2-pyridylazo)resorcinol (PAR) on three types of silica gel (Silochrom S-120 (200–350 m), Silochrom S-120 (315–500 m), and Silochrom S-80 (200–350 m)) was studied. It was found that OP-7 does not affect the adsorption of surfactants. The effect of cationic surfactants increases in the order tetrabutylammonium perchlorate < cetyltrimethylammonium bromide < cetylpyridinium bromide. The adsorption activity of silica gels increases in the order Silochrom S-120 (315–500 m) < Silochrom S-80 (200–350 m) < Silochrom S-120 (200–350 m). Cetylpyridinium bromide provides full immobilization of PAR on silica gel Silochrom S-120 (200–350 m) in the pH range 2–9.     

Improved spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol in the presence of benzyldimethylstearyltrimethylammonium chloride

An improved spectrophotometric determination of uranium(VI) is proposed using 4-(2-pyridylazo)resorcinol(PAR) in the presence of benzyldimethylstearyltrimethylammonium chloride(BSTAC) as a cationic surfactant. The calibration graph is linear in the range of 0.3–60 g/10 ml uranium(VI), measuring the absorbance at 550 nm. The reproducibility for 19.0 g/10 ml uranium(VI) is 0.57%. The third-derivative method using the third-derivative distance (d³A/d³) among ₁ 530 nm, ₃ 594 nm and ₂ 565 nm was also investigated.     

Spectrophotometric determination of iron (II) using a highly sensitive chromogenic reaction of 4-(2-benzothiazolylazo)pyrocatechol

4-(2-Benzothiazolylazo)pyrocatechol (BTAPC), a new organic reagent, reacts with Fe(II) to form a stable, water-soluble, violet, positively charged, binary complex over a pH range of 6.3 to 6.8. Some water-miscible organic solvents and surfactants have solubilization and sensibilization effects. In 40% acetone-water medium at 25 °C, a (ionic strength) value of 0.1 and a pH value of 6.5, the ratio of Fe(II) to BTAPC in the complex is 1 2 with an apparent stability constant of 1.97 × 10⁹ and two absorption peaks at 535 and 615 nm. If the absorbance is measured at 615 nm, not only the sensitivity is high (₆₁₅ = 1.10 × 10⁵ 1 · mol^–1 · cm^–1) and the contrast () is large (90 nm), but also the selectivity is fairly good. Beer's law is obeyed for iron along the range of 0 to 16 g per 25 ml. The satisfactory results have been achieved after applying the method to the determination of traces of iron in water.     

Rapid spectrophotometric determination of manganese(II) with 4-(2-thiazolylazo)-resorcinol

Summary Manganese forms a red chelate with 4-(2-thiazolylazo)-resorcinol at pH 8.8 (borate buffer), and absorbance is measured after 30 s, at 540 nm in the presence of 20%tert-butyl alcohol (by volume). The 12 complex obeys Beer's law for manganese concentration of 0.04–1.4g per ml, has molar absorptivity 4.176 x 10⁴ and Sandell sensitivity 0.0013g cm^–2. The formation constant (logK) is found to be 9.32, and relative standard deviation ±0.22%. Of the 48 ions studied for interference, only Co(II), Zn(II), Cd(II), Pb(II) and EDTA^2– are found to interfere. This method has been applied for the determination of manganese content in alloy steels.

---

Spektrophotometrische Bestimmung von Mangan(II) mit 4-(2-Thiazolylazo)-resorcin

Zusammenfassung Mangan bildet bei pH 8,8 (Boratpuffer) mit 4-(2-Thiazolylazo)-resorcin ein rotes Chelat, dessen Absorbanz nach 30 sec bei 540 nm in Gegenwart von 20% tert. Butylalkohol gemessen wird. Dieser 12-Komplex entspricht bei einer Mangan-Konzentration von 0,04–1,4g/ml dem Beerschen Gesetz; seine molare Absorption beträgt 4,176 x 10⁴, die Empfindlichkeit nach Sandell 0,0013g·cm^–2. Die Bildungskonstante (log K) beträgt 9,32, die rel. Standardabweichung ±0,22%. Unter 48 untersuchten Ionen erwiesen sich nur Co(II), Zn(II), Cd(II), Pb(II) und EDTA als störend.-Das Verfahren wurde zur Bestimmung des Mangangehaltes in Stahl verwendet.

     

4-(21-thiazolylazo) resacetophenone oxime. A new analytical reagent for the spectrophotometric determination of uranium (VI)

4-(2¹-Thiazolylazo) resacetophenone oxime forms a pink colored soluble complex with uranium(VI) in buffer solutions of pH 6.0. The colored complex has a maximum absorbance at the wavelength 572 nm and the color is stable for about 48 h. The system obeys Beer's law over the concentration range 0.2–6.0 g of uranium cm^–3. The molar absorptivity and the Sandell sensitivity of the complex are 6.2×10⁴ dm³.mol^–1.cm^–1 and 0.0038 g cm^–2, respectively. Effect of various diversions has been studied and the method was successfully applied for the determination of uranium in rock samples.     

Spectrophotometric determination of palladium with a new chelating reagent,N,N-dimethyl-N′-(4-methyl-5-nitro-2-thiazolyl) thiourea

Summary N,N-Ditnethyl-N-(4-methyl-5-nitro-2-thiazolyl)thiourea A new spectrophotometric method for the determination of palladium with N,N-dimethyl-N-(4-methyl-5-nitro-2-thiazolyl)thiourea (DMNT) is proposed. DMNT instantly forms a yellow chelate with Pd(II) at pH 2 at room temperature, which is readily extracted into organic solvents such as chloroform and shows a higher absorption maximum (=40,400) at 413 nm. The ratio of Pd(II) to reagent in the chelate is 12 as determined by the widely used method and also verified by synthesis of the authentic Pd-chelate. The chelate conforms well with the Lambert-Beer's law over a wide concentration range (3.3–22g in 10 ml chloroform). The optimum concentration range of palladium for spectrophotometry by the Ringbom plot is 5.6–18.6g in 10 ml of chloroform solution. This method gives a good reproducibility, high sensitivity and high accuracy in the presence of many foreign ions.

---

Spektrophotometrische Bestimmung von Palladium mit N,N-Dimethyl-N- (4-methyl-5-nitro-2-thiazolyl)-thioharnstoff (DMNT)

Zusammenfassung Eine neue spektrophotometrische Methode zur Bestimmung von Palladium mit DMNT wurde vorgeschlagen. Dieses Reagens bildet mit Pd(II) bei pH 2 und Zimmertemperatur ein gelbes Chelat, das mit Chloroform gut extrahierbar ist und bei 413 nm ein hohes Absorptionsmaximum (=40400) zeigt. Dessen Zusammensetzung wurde in üblicher Weise zu 12=Pd: DMNT bestimmt. Im Konzentrationsbereich 3,3–22g/10 ml entspricht das Chelat dem Lambert-Beerschen Gesetz. Die optimale Konzentration für die spektrophotometrische Bestimmung liegt zwischen 5,6 und 18,6g/10 ml Chloroform. Das Verfahren gibt gut reproduzierbare Ergebnisse, ist hoch empfindlich und auch in Anwesenheit vieler Fremdionen sehr genau.

     

Electronic effect of the 1-[η5-cyclgpentadienyl-η5-(3)-1,2-dicarbollyliron(II)] group

Conclusions The Taft method was used to determine the electronic effect of the 1-[⁵-cyclopenta-dienyl-⁵-(3)-1,2-dicarbollyliron(II) ] group which displays strong electron-donor properties: _I=–0.22 and _R=–0.20.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1449–1451, June, 1985.     

Diacetylenic Derivatives of Fe2(CO)6(μ-EE′): Spectroscopic Investigations of Fe2(CO)6{μ-EC(H) = C(C≡ CMe)E′} (E = E′, E ≠ E′; E, E′ = S, Se, Te)

The diacetylenic adducts, Fe₂(CO)₆{-EC(H) = C(C CMe)E} (E = E, E E; E, E = S, Se, Te) (1–8) have been obtained from the room temperature stirring of Fe₂(CO)₆(-EE) with HC CC CMe in methanol solvent containing sodium acetate. Compounds 1–8 have been characterized by IR and multinuclear NMR (¹H, ¹³C, ⁷⁷Se, and ^l25Te) spectroscopy. Trends in the chemical shifts of ⁷⁷Se and ¹²⁵Te NMR spectra of Fe₂(CO)₆{-EC(H) = C(C CMe)E} with a variation of EE are discussed.     

2-(α-Pyridyl)-thioquinaldinamide (PTQA)-A novel fluorimetric reagent in inorganic trace analysis. I: The nonextractive,nonquenching fluorescent method for the determination of chromium(VI)

A direct fluorimetric method for determining Cr(VI) in aqueous solutions is described. The nonfluorescent reagent 2-(-pyridyl)-thioquinaldinamide (PTQA) and Cr(VI) interact to produce an intensely fluorescent species [_ex(max) 360 nm; _em(max) 500 nm] showing constant and maximum fluorescence intensity in slightly acidic media (0.18N–1.08N H₂SO₄). The fluorescence attains its maximum value within 5 min and remains unchanged for 24 h. The system obeys Beer's law from 2 ng/ml to 0.8 g/ml of Cr(VI). Over sixty cations, anions and complexing agents are without any effect on the fluorimetric determination of 0.1 g/ml of Cr(VI). The method has been tested with synthetic mixtures, steels, solutions containing both Cr(III) and Cr(VI), and environmental samples.     

Determination of Lead Using a New Chromogenic Reagent 2-(2-Sulfo-4-acetylphenylazo)-7-(2,4,6-trichlorophenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic Acid

A novel chromogenic reagent, 2-(2-sulfo-4-acetylphenylazo)-7-(2,4,6-trichlorophenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid 1, was prepared by diazo coupling of 4-acetylaniline-2-sulfonic acid and 2,4,6-trichloroaniline to chromotropic acid through –N=N– groups. Based on this reagent, a simple, sensitive and selective spectrophotometric method was developed for the determination of lead. In 0.20M phosphoric acid medium, lead reacts with 1 to form a 1:2 blue complex with an absorption maximum of 654nm. Beers law is obeyed in the range of 0–0.6mgL^–1 of lead. The apparent molar absorptivity is 1.25×10⁵Lmol^–1cm^–1. The detection limit and quantification limit were found to be 0.63µgL^–1 and 2.1µgL^–1, respectively. The relative standard deviation for eleven replicate measurements was of 2.6%. The interference of foreign ions was also investigated. All the other foreign ions studied did not interfere with lead determination except for Ca(II) and Ba(II). The interference caused by Ca(II) and Ba(II) can be eliminated by prior extraction of lead with potassium iodide-methylisobutylketone (KI-MIBK). The proposed method was applied to the determination of lead in certified samples with satisfactory results.     

Preparation of 8-(5-oxoindeno [3,2-b]-4-pyridyl)-1-naphthoic acids

The condensation of 1-(1,3-indanedion-2-ylidene)-2-acenaphthenone with imines of -dicarbonyl compounds gave 2,5-dioxospiro 1,4,acenaphthene-1,4-dihydroindeno-[3,2-b]pyridines. Oxidation of the pyridines with air oxygen at room temperature without catalysts brings about cleavage of the C-C bond to give 8-(5-oxoindeno[3,2-b]-4-pyridyl)-1-naphthoic acids.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 210–212, February, 1972.     

Studies of the reactions of Br(2P3/2) and Br(2P1/2) with SiH4

Photobromination of SiH₄ under uv-irradiation at various wavelengths has been studied. Rate constants for the elementary reactions Br(²P_3/2)+SiH₄HBr+SiH₃ (k=3.2×10^–11 exp(–21.8±2.5)/RT, cm³/s) and Br^* (²P_1/2)+SiH₄HBr+SiH₃ (k^*=(3±1)×10^–13 cm³/s) have been determined in the temperature range from 300 to 415 K.

---

- . Br(²P_3/2)+SiH₄HBr+SiH₃, k=3,2×10^–11 exp (–21,8±2,5)/RT ³/ Br^*(²P_1/2)+SiH₄HBr+SiH₃, k^*=(3±1)×10^{–13 3}/ 300–415 K.

     

Kinetics and mechanism of the interaction of azide with [(H2O)(tap)2RuORu(tap)2-(H2O)]2+ ion at physiological pH

The title reaction has been studied spectrophotometrically in aqueous medium as a function of [substrate complex], [ligand], pH and temperature at constant ionic strength. At the physiological pH (7.4) the interaction with azide shows two distinct consecutive steps, i.e., it shows a non-linear dependence on the concentration of N₃ ^–; both processes are [ligand]-dependent. The rate constant for the processes are: k ₁10^–3 s^–1 and k ₂10^–5 s^–1. The activation parameters calculated from Eyring plots are: H ₁ = 14.8 ± 1 kJ mol^–1, S ₁ = –240 ± 3 J K^–1 mol^–1, H ₂ = 44.0 ± 1.5 kJ mol^–1 and S ₂ = –190 ± 4 J K^–1 mol^–1. Based on the kinetic and activation parameters an associative interchange mechanism is proposed for the interaction process. From the temperature dependence of the outersphere association equilibrium constant, the thermodynamic parameters calculated are: H ₁ ⁰ = 4.4 ± 0.9 kJ mol^–1, S ₁ ⁰ = 64 ± 3 J K^–1 mol^–1 and H ₂ ⁰ = 14.2 ± 2.9 kJ mol^–1, S ₂ ⁰ = 90 ± 9 J K^–1 mol^–1, which gives a negative G ⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex.