Synthetic and structural investigations of monomeric dilithium boraamidinates and bidentate NBNCN ligands with bulky N-bonded groups

The dilithiated boraamidinate complexes [Li(2)[PhB(NDipp)(2)](THF)(3)] (7a) (Dipp = 2,6-diisopropylphenyl) and [Li(2)[PhB(NDipp)(N(t)Bu)](OEt(2))(2)] (7b), prepared by reaction of PhB[N(H)Dipp][N(H)R'] (6a, R' = Dipp; 6b, R' = (t)Bu) with 2 equiv of (n)BuLi, are shown by X-ray crystallography to have monomeric structures with two terminal and one bridging THF ligands (7a) or two terminal OEt(2) ligands (7b). The derivative 7a is used to prepare the spirocyclic group 13 derivative [Li(OEt(2))(4)][In[PhB(NDipp)(2)](2)] (8a) that is shown by an X-ray structural analysis to be a solvent-separated ion pair. The monoamino derivative PhBCl[N(H)Dipp] (9a), obtained by the reaction of PhBCl(2) with 2 equiv of DippNH(2), serves as a precursor for the synthesis of the four-membered BNCN ring [[R'N(H)](Ph)B(mu-N(t)Bu)(2)C(n)Bu] (10a, R' = Dipp). The X-ray structures of 6a, 9a, and 10a have been determined. The related derivative 10b (R' = (t)Bu) was synthesized by the reaction of [Cl(Ph)B(mu-N(t)Bu)(2)C(n)Bu] with Li[N(H)(t)Bu] and characterized by (1)H, (11)B, and (13)C NMR spectra. In contrast to 10a and 10b, NMR spectroscopic data indicate that the derivatives [[DippN(H)](Ph)B(NR')(2)CR(NR')] (11a: R =( t)Bu, R' = Cy; 11b: R = (n)Bu, R' = Dipp) adopt acyclic structures with three-coordinate boron atoms. Monolithiation of 10a produces the novel hybrid boraamidinate/amidinate (bamam) ligand [Li[DippN]PhB(N(t)Bu)C(n)Bu(N(t)Bu)] (12a).     

Carbon dioxide activation with sterically pressured mid- and high-valent uranium complexes

Sterically pressured mid- to high-valent uranium complexes with an aryloxide substituted triazacyclononane ligand scaffold, [(((R)ArO)3tacn)(3-)], were studied for carbon dioxide activation and transformation chemistry. The high valent uranium(V) imido species [(((R)ArO)3tacn)U(NR)] (R = (t)Bu, R' = 2,4,6-trimethylphenyl (2-(t)Bu); R = Ad, R' = 2,4,6-trimethylphenyl (2-Ad); R = (t)Bu, R' = phenyl (3-(t)Bu)) were synthesized and spectroscopically characterized. X-ray crystallography of the tert-butyl mesityl imido derivative, 2-(t)Bu , reveals coordination of a bent imido fragment with a relatively long U-N bond distance of 2.05 A. The mesityl imido complexes reacted with carbon dioxide, readily extruding free isocyanate to produce uranium(V) terminal oxo species, [(((R)ArO)3tacn)U(O)] (R = (t)Bu (4-(t)Bu), Ad (4-Ad)), presumably through multiple bond metathesis via a uranium(V) carbimate intermediate. Using the smaller phenyl imido fragment in 3-(t) Bu slowed isocyanate loss, allowing the uranium(V) carbimate intermediate to undergo a second metathesis reaction, ultimately producing the diphenyl ureate derivative, [(((tBu)ArO)3tacn)U(NPh2)CO] (5-(t)Bu). Single crystal X-ray diffraction studies were carried out on both uranium(V) terminal oxo complexes and revealed short U-O bonds (1.85 A) indicative of a formal UO triple bond. The electronic structure of the oxo U(V) complexes was investigated by electronic absorption and EPR spectroscopies as well as SQUID magnetization and DFT studies, which indicated that their electronic properties are highly unusual. To obtain insight into the reactivity of CO2 with U-N bonds, the reaction of the uranium(IV) amide species, [(((R)ArO)3tacn)U(NHMes)] (R = (t)Bu (6-(t)Bu), Ad (6-Ad) with carbon dioxide was investigated. These reactions produced the uranium(IV) carbamate complexes, [(((R)ArO)3tacn)U(CO2NHMes)] (R = (t)Bu (7-(t)Bu), Ad (7-Ad)), resulting from insertion of carbon dioxide into U-N(amide) bonds. The molecular structures of the synthesized uranium carbamate complexes highlight the different reactivities due to the steric pressure introduced by the alkyl derivatized tris(aryloxide) triazacyclononane ligand. The sterically open tert-butyl derivative creates a monodentate eta(1)-O bound carbamate species, while the sterically more bulky adamantyl-substituted compound forces a bidentate kappa(2)-O,O coordination mode of the carbamate ligand.     

Reactivity of the B-H Bond in tris(pyrazolyl)hydroborato zinc complexes: unexpected example of zinc hydride formation in a protic solvent and its relevance towards hydrogen transfer to NAD(+) mimics by tris(pyrazolyl)hydroborato zinc complexes in alcoholic media

Solutions of the zinc hydroxide complex [Tp(Bu(t),Me)]ZnOH in alcohols (ROH; R = Me, Et, Pr(i)) achieve hydride transfer to the NAD(+) model, 10-methylacridinium perchlorate. Deuterium labeling studies, however, demonstrate that the source of the hydride is not the alcohol but, rather, the B [bond] H group of the [Tp(Bu(t),Me)] ligand. A further example in which a [Tp(Bu(t),Me)] ligand acts as a hydride donor is provided by the reaction of the aqua complex [[Tp(Bu(t),Me)]Zn(OH(2))][HOB(C(6)F(5))(3)] with MeOH to generate the zinc hydride complex [Tp(Bu(t),Me)]ZnH. The present study therefore provides a caveat for the often assumed inertness of the B [bond] H group in tris(pyrazolyl)hydroborato ligands, especially in the presence of reactive cationic species.     

Application of molybdenum bis(imido) complexes in ethylene dimerisation catalysis

In combination with EtAlCl(2) (Mo : Al = 1 : 15) the imido complexes [MoCl(2)(NR)(NR')(dme)] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (1); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (3); R = R' = Bu(t) (4); dme = 1,2-dimethoxyethane) and [Mo(NHBu(t))(2)(NR)(2)] (R = 2,6-Pr(i)(2)-C(6)H(3) (5); R = Bu(t) (6)) each show moderate TON, activity, and selectivity for the catalytic dimerisation of ethylene, which is influenced by the nature of the imido substituents. In contrast, the productivity of [MoCl(2)(NPh)(2)(dme)] (2) is low and polymerisation is favoured over dimerisation. Catalysis initiated by complexes 1-4 in combination with MeAlCl(2) (Mo : Al = 1 : 15) exhibits a significantly lower productivity. Reaction of complex 5 with EtAlCl(2) (2 equiv.) gives rise to a mixture of products, while addition of MeAlCl(2) affords [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. Treatment of 6 with RAlCl(2) (2 equiv.) (R = Me, Et) yields [Mo({μ-N-Bu(t)}AlCl(2))(2)] (7) in both cases. Imido derivatives 1 and 3 react with Me(3)Al and MeAlCl(2) to form the bimetallic complexes [MoMe(2)(N{R}AlMe(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (8); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (10)) and [MoMe(2)(N{R}AlCl(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (9); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (11)), respectively. Exposure of complex 8 to five equivalents of thf or PMe(3) affords the adducts [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)(L)] (L = thf (12); L = PMe(3) (13)), while reaction with NEt(3) (5 equiv.) yields [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. The molecular structures of complexes 5, 9 and 11 have been determined.     

Synthesis and reactivity of cationic niobium and tantalum methyl complexes supported by imido and β-diketiminato ligands

The synthesis and reactivity of the cationic niobium and tantalum monomethyl complexes [(BDI)MeM(N(t)Bu)][X] (BDI = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-(i)Pr(2)C(6)H(3); M = Nb, Ta; X = MeB(C(6)F(5))(3), B(C(6)F(5))(4)] was investigated. The cationic alkyl complexes failed to irreversibly bind CO but formed phosphine-trapped acyl complexes [(BDI)(R(3)PC(O)Me)M(N(t)Bu)][B(C(6)F(5))(4)] (R = Et, Cy) in the presence of a combination of trialkylphosphines and CO. Treatment of the monoalkyl cationic Nb complex with XylNC (Xyl = 2,6-Me(2)-C(6)H(3)) resulted in irreversible formation of the iminoacyl complex [(BDI)(XylN[double bond, length as m-dash]C(Me))Nb(N(t)Bu)][B(C(6)F(5))(4)], which did not bind phosphines but would add a methide group to the iminoacyl carbon to provide the known ketimine complex (BDI)(XylNCMe(2))Nb(N(t)Bu). Further stoichiometric chemistry explored i) migratory insertion reactions to form new alkoxide, amidinate, and ketimide complexes; ii) protonolysis reactions with Ph(3)SiOH to form thermally robust cationic siloxide complexes; and iii) catalytic high-density polyethylene formation mediated by the cationic Nb methyl complex.     

Group 6 imido complexes supported by diamido-donor ligands

Reactions of the lithiated diamido-pyridine or diamido-amine ligands Li(2)N(2)N(py) or Li(2)N(2)N(am) with [W(NAr)Cl(4)(THF)] (Ar = Ph or 2,6-C(6)H(3)Me(2); THF = tetrahydrofuran) afforded the corresponding imido-dichloride complexes [W(NAr)(N(2)N(py))Cl(2)] (R = Ph, 1, or 2,6-C(6)H(3)Me(2), 2) or [W(NAr)(N(2)N(am))Cl(2)] (R = Ph, 3, or 2,6-C(6)H(3)Me(2), 4), respectively, where N(2)N(py) = MeC(2-C(5)H(4)N)(CH(2)NSiMe(3))(2) and N(2)N(am) = Me(3)SiN(CH(2)CH(2)NSiMe(3))(2). Subsequent reactions of 1 with MeMgBr or PhMgCl afforded the dimethyl or diphenyl complexes [W(NPh)(N(2)N(py))R(2)] (R = Me, 5, or Ph, 6), respectively, which have both been characterized by single crystal X-ray diffraction. Reactions of Li(2)N(2)N(py) or Li(2)N(2)N(am) with [Mo(NR)(2)Cl(2)(DME)] (R = (t)Bu or Ph; DME = 1,2-dimethoxyethane) afforded the corresponding bis(imido) complexes [Mo(NR)(2)(N(2)N(py))] (R = (t)Bu, 7, or Ph, 8) and [Mo(N(t)Bu)(2)(N(2)N(am))] (9).     

Protonation and reactivity towards carbon dioxide of the mononuclear tetrahedral zinc and cobalt hydroxide complexes, [Tp(Bu)t(,Me)]ZnOH and [Tp(Bu)t(,Me)]CoOH: comparison of the reactivity of the metal hydroxide function in synthetic analogues of carbonic anhydrase

The tris(3-tert-butyl-5-methylpyrazolyl)hydroborato zinc hydroxide complex [Tp(Bu)t(,Me)]ZnOH is protonated by (C(6)F(5))(3)B(OH(2)) to yield the aqua derivative [[Tp(Bu)t(,Me)]Zn(OH(2))][HOB(C(6)F(5))(3)], which has been structurally characterized by X-ray diffraction, thereby demonstrating that protonation results in a lengthening of the Zn-O bond by ca. 0.1 A. The protonation is reversible, and treatment of [[Tp(Bu)t(,Me)]Zn(OH(2))](+) with Et(3)N regenerates [Tp(Bu)t(,Me)]ZnOH. Consistent with the notion that the catalytic hydration of CO(2) by carbonic anhydrase requires deprotonation of the coordinated water molecule, [[Tp(Bu)t(,Me)]Zn(OH(2))](+) is inert towards CO(2), whereas [Tp(Bu)t(,Me)]ZnOH is in rapid equilibrium with the bicarbonate complex [Tp(Bu)t(,Me)]ZnOC(O)OH under comparable conditions. The cobalt hydroxide complex [Tp(Bu)t(,Me)]CoOH is likewise protonated by (C(6)F(5))(3)B(OH(2)) to yield the aqua derivative [[Tp(Bu)t(,Me)]Co(OH(2))][HOB(C(6)F(5))(3)], which is isostructural with the zinc complex. The aqua complexes [[Tp(Bu)t(,Me)]M(OH(2))][HOB(C(6)F(5))(3)] (M = Zn, Co) exhibit a hydrogen bonding interaction between the metal aqua and boron hydroxide moieties. This hydrogen bonding interaction may be viewed as analogous to that between the aqua ligand and Thr-199 at the active site of carbonic anhydrase. In addition to the structural similarities between the zinc and cobalt complexes, [Tp(Bu)t(,Me)ZnOH] and [Tp(Bu)()t(,Me)]CoOH, and between [[Tp(Bu)t(,Me)]Zn(OH(2))](+) and [[Tp(Bu)t(,Me)]Co(OH(2))](+), DFT (B3LYP) calculations demonstrate that the pK(a) value of [[Tp]Zn(OH(2))](+) is similar to that of [[Tp]Co(OH(2))](+). These similarities are in accord with the observation that Co(II) is a successful substitute for Zn(II) in carbonic anhydrase. The cobalt hydroxide [Tp(Bu)()t(,Me)]CoOH reacts with CO(2) to give the bridging carbonate complex [[Tp(Bu)t(,Me)]Co](2)(mu-eta(1),eta(2)-CO(3)). The coordination mode of the carbonate ligand in this complex, which is bidentate to one cobalt center and unidentate to the other, is in contrast to that in the zinc counterpart [[Tp(Bu)t(,Me)]Zn](2)(mu-eta(1),eta(1)-CO(3)), which bridges in a unidentate manner to both zinc centers. This difference in coordination modes concurs with the suggestion that a possible reason for the lower activity of Co(II)-carbonic anhydrase is associated with enhanced bidentate coordination of bicarbonate inhibiting its displacement.     

Synthesis and structural characterization of [kappa3-B,S,S-B(mimR)3]Ir(CO)(PPh3)H (R = Bu(t), Ph) and [kappa4-B(mim(Bu(t))3]M(PPh3)Cl (M = Rh, Ir): analysis of the bonding in metal borane compounds

A series of iridium and rhodium complexes that feature M-->B dative bonds, namely [kappa(3)-B,S,S-B(mim(R))3]Ir(CO)(PPh3)H (R = But, Ph) and [kappa4-B(mim(Bu)t)3]M(PPh3)Cl (M = Rh, Ir), has been synthesized via (i) the reactions of Ir(PPh3)2(CO)Cl with [Tm(Bu)t]Tl and [Tm(Ph)]Li and (ii) the reactions of (COD)M(PPh3)Cl with [Tm(Bu)t]K. The complexes have been structurally characterized by X-ray diffraction, thereby demonstrating the presence of a M-->B dative bond in each complex. The nature of the M-->B interaction in these complexes has been addressed by computational methods which indicate that the metal centers possess a d(6) configuration. The d(6) configuration is in accord with the value predicted by using a method that employs the valence to determine d(n)(), but is not in accord with the d8 configuration that is predicted using the oxidation number. Thus, even though B(mim(R))3 may be regarded as a neutral closed-shell ligand, coordination to a d(n) transition metal via the boron results in the formation of a complex in which the metal center possesses a d(n-2) configuration.     

3,5-Dimethyl and 3,5-di-tert-butylpyrazolato complexes with alkali metals: monomeric, dimeric, cluster, and 1D chain structures

The pyrazolato complexes [(Me(2)pz)(THF)Li] (1), [((t)Bu(2)pz)Li](4) (2), [((t)Bu(2)pzH)((t)()Bu(2)pz)Li](2) (2a), [(Me(2)pz)Na] (3), [((t)Bu(2)pz)Na](4), [((t)Bu(2)pz)(6)(OH)Na(7)] (4a), [((t)Bu(2)pz)(18-crown-6)Na] (4b), and [((t)Bu(2)pz)K] (5) were synthesized by metalation reactions between R(2)pzH (R = Me, (t)()Bu) and alkyllithium, elemental sodium, or potassium. All the complexes were characterized by spectroscopic methods and microanalysis, and in addition, the crystal structures of 2, 2a, 3, 4a, 4b, and 5 were obtained by single-crystal X-ray diffraction. They show monomeric, dimeric, cluster, and 1D chain structures in the solid state. Ab initio calculations on the structure and stabilities of the monomeric pzM complexes were performed at the MP2 level of theory showing good agreement with the coordination preferences of the pyrazolato ligand to a particular alkali ion.     

Molecular precursors for the preparation of homogenous zirconia-silica materials by hydrolytic sol-gel process in organic media. Crystal structures of [Zr{OSi(O(t)Bu)3}4(H2O)2]·2H2O and [Ti(O(t)Bu){OSi(O(t)Bu)3}3

[Zr(OPr(i))(4)·Pr(i)OH] reacts with [HOSi(O(t)Bu)(3)] in anhydrous benzene in 1:1 and 1:2 molar ratios to afford alkoxy zirconosiloxane precursors of the types [Zr(OPr(i))(3){OSi(O(t)Bu)(3)}] (A) and [Zr(OPr(i))(2){OSi(O(t)Bu)(3)}(2)] (B), respectively. Further reactions of A or B with glycols in 1:1 molar ratio afforded six chemically modified precursors of the types [Zr(OPr(i))(OGO){OSi(O(t)Bu)(3)}] (1A-3A) and [Zr(OGO){OSi(O(t)Bu)(3)}(2)] (1B-3B), respectively [where G = (-CH(2)-)(2) (1A, 1B); (-CH(2)-)(3) (2A, 2B) and (-CH(2)CH(2)CH(CH(3)-)} (3A, 3B)]. The precursors A and B are viscous liquids, which solidify on ageing whereas the other products are all solids, soluble in common organic solvents. These were characterized by elemental analyses, molecular weight measurements, FAB mass, FTIR, (1)H, (13)C and (29)Si-NMR studies. Cryoscopic molecular weight measurements of all the products, as well as the FAB mass studies of 3A and 3B, indicate their monomeric nature. However, FAB mass spectrum of the solidified B suggests that it exists in dimeric form. Single crystal structure analysis of [Zr{OSi(O(t)Bu)(3)}(4)(H(2)O)(2)]·2H(2)O (3b) (R(fac) = 11.9%) as well as that of corresponding better quality crystals of [Ti(O(t)Bu){OSi(O(t)Bu)(3)}(3)] (4) (R(fac) = 5.97%) indicate the presence of a M-O-Si bond. TG analyses of 3A, B, and 3B indicate the formation of zirconia-silica materials of the type ZrO(2)·SiO(2) from 3A and ZrO(2)·2SiO(2) from B or 3B at low decomposition temperatures (≤200 °C). The desired homogenous nano-sized zirconia-silica materials [ZrO(2)·nSiO(2)] have been obtained easily from the precursors A and B as well as from the glycol modified precursors 3A and 3B by hydrolytic sol-gel process in organic media without using any acid or base catalyst, and these were characterized by powder XRD patterns, SEM images, EDX analyses and IR spectroscopy.     

Nucleophilic reactivity and oxo/sulfido substitution reactions of MVIO3 Groups (M = Mo, W)

The nucleophilic reactivity of oxo ligands in the groups M(VI)O(3) in the trigonal complexes [(Me(3)tacn)MO(3)] (M = Mo (1), W (10)) and [(Bu(t)(3)tach)MO(3)] (M = Mo (5), W (14)) has been investigated. Complexes 1/10 can be alkylated with MeOTf to give [(Me(3)tacn)MO(2)(OMe)](1+) (2/11), silylated with Pr(i)(3)SiOTf to form [(Me(3)tacn)MO(2)(OSiPr(i)(3))](+) (3/12), and protonated with HOTf to yield [(Me(3)tacn)MoO(2)(OH)](+) (4). Similarly, complexes 5/14 can be silylated to [(Bu(t)(3)tach)MO(2)(OSiPr(i)(3))](+) (6/15) and protonated to [(Bu(t)(3)tach)MO(2)(OH)](+) (7/16). Products were isolated as triflate salts in yields exceeding 70%. When excess acid was used, the dinuclear mu-oxo species [(Bu(t)(3)tach)(2)M(2)O(5)](2+) (8/17) were obtained. X-ray structures are reported for 2-4, 6-8, 12, and 15-17. All mononuclear complexes have dominant trigonal symmetry with a rhombic distortion owing to a M[bond]OR bond (R = Me, SiPr(i)(3), H), which is longer than M[double bond]O oxo interactions; the latter exert a substantial trans influence on M[bond]N bond lengths. Oxo ligands in 5/14 undergo replacement with sulfide. Lawesson's reagent effects formation of [(Bu(t)(3)tach)MS(3)] (9/18), 14 with excess B(2)S(3) yields incompletely substituted [(Bu(t)(3)tach)WOS(2)] (20), and 5 with excess B(2)S(3) yields [(Bu(t)(3)tach)Mo(IV)O(S(4))] (19). The structures of 9, 19, and 20 are reported. Precedents for M(VI)S(3) groups in five- and six-coordinate molecules are limited. This investigation is the first detailed study of the behavior of M(VI)O(3) groups in nucleophilic and oxo/sulfido substitution reactions and should be useful in synthetic approaches to the active sites of the xanthine oxidase enzyme family and of certain tungstoenzymes. (Bu(t)(3)tach = 1,3,5-tri-tert-butyl-1,3,5-triazacyclohexane, Me(3)tacn = 1,4,7-trimethyl-1,4,7-triazacyclonane; OTf = triflate).     

Synthesis and structures of aluminum and magnesium complexes of tetraimidophosphates and trisamidothiophosphates: EPR and DFT investigations of the persistent neutral radicals {Me2Al[(mu-NR)(mu-NtBu)P(mu-NtBu)2]Li(THF)2}(*) (R = SiMe3, tBu)

Reactions of (RNH)(3)PNSiMe(3) (3a, R = (t)()Bu; 3b, R = Cy) with trimethylaluminum result in the formation of {Me(2)Al(mu-N(t)Bu)(mu-NSiMe(3))P(NH(t)()Bu)(2)]} (4) and the dimeric trisimidometaphosphate {Me(2)Al[(mu-NCy)(mu-NSiMe(3))P(mu-NCy)(2)P(mu-NCy)(mu-NSiMe(3))]AlMe(2)} (5a), respectively. The reaction of SP(NH(t)Bu)(3) (2a) with 1 or 2 equiv of AlMe(3) yields {Me(2)Al[(mu-S)(mu-N(t)Bu)P(NH(t)()Bu)(2)]} (7) and {Me(2)Al[(mu-S)(mu-N(t)()Bu)P(mu-NH(t)Bu)(mu-N(t)Bu)]AlMe(2)} (8), respectively. Metalation of 4 with (n)()BuLi produces the heterobimetallic species {Me(2)Al[(mu-N(t)Bu)(mu-NSiMe(3))P(mu-NH(t)()Bu)(mu-N(t)()Bu)]Li(THF)(2)} (9a) and {[Me(2)Al][Li](2)[P(N(t)Bu)(3)(NSiMe(3))]} (10) sequentially; in THF solutions, solvation of 10 yields an ion pair containing a spirocyclic tetraimidophosphate monoanion. Similarly, the reaction of ((t)BuNH)(3)PN(t)()Bu with AlMe(3) followed by 2 equiv of (n)BuLi generates {Me(2)Al[(mu-N(t)Bu)(2)P(mu(2)-N(t)Bu)(2)(mu(2)-THF)[Li(THF)](2)} (11a). Stoichiometric oxidations of 10 and 11a with iodine yield the neutral spirocyclic radicals {Me(2)Al[(mu-NR)(mu-N(t)Bu)P(mu-N(t)Bu)(2)]Li(THF)(2)}(*) (13a, R = SiMe(3); 14a, R = (t)Bu), which have been characterized by electron paramagnetic resonance spectroscopy. Density functional theory calculations confirm the retention of the spirocyclic structure and indicate that the spin density in these radicals is concentrated on the nitrogen atoms of the PN(2)Li ring. When 3a or 3b is treated with 0.5 equiv of dibutylmagnesium, the complexes {Mg[(mu-N(t)()Bu)(mu-NH(t)()Bu)P(NH(t)Bu)(NSiMe(3))](2)} (15) and {Mg[(mu-NCy)(mu-NSiMe(3))P(NHCy)(2)](2)} (16) are obtained, respectively. The addition of 0.5 equiv of MgBu(2) to 2a results in the formation of {Mg[(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)](2)} (17), which produces the hexameric species {[MgOH][(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)]}(6) (18) upon hydrolysis. Compounds 4, 5a, 7-11a, and 15-17 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy and, in the case of 5a, 9a.2THF, 11a, and 18, by X-ray crystallography.     

Molybdenum(VI) dioxo and oxo-imido complexes of fluorinated β-ketiminato ligands and their use in OAT reactions

Substitution of a methyl by a trifluoromethyl moiety in well-known β-ketimines afforded the ligands (Ar)NC(Me)CH(2)CO(CF(3)) (HL(H), Ar = C(6)H(5); HL(Me), A r= 2,6-Me(2)C(6)H(3); HL(iPr), Ar = 2,6-(i)Pr(2)C(6)H(3)). Subsequent complexation to the [MoO(2)](2+) core leads to the formation of novel complexes of general formula [MoO(2)(L(R))(2)] (R = H, 1; R = Me, 2; R = iPr, 3). For reasons of comparison the oxo-imido complex [MoO(N(t)Bu)(L(Me))(2)] (4) has also been synthesized. Complexes 1-4 were investigated in oxygen atom transfer (OAT) reactions using the substrate trimethylphosphine. The respective products after OAT, the reduced Mo(IV) complexes [MoO(PMe(3))(L(R))(2)] (R = H, 5; R = Me, 6; R = iPr, 7) and [Mo(N(t)Bu)(PMe(3))(L(Me))(2)] (8), were isolated. All complexes have been characterized by NMR spectroscopy, and 1-4 also by cyclic voltammetry. A positive shift of the Mo(VI)-Mo(V) reduction wave upon fluorination was observed. Furthermore, molecular structures of complexes 2, 4, 5, and 8 have been determined via single crystal X-ray diffraction analysis. Complex 8 represents a rare example of a Mo(IV) phosphino-imido complex. Kinetic measurements by UV-vis spectroscopy of the OAT reactions from complexes 1-4 to PMe(3) showed them to be more efficient than previously reported nonfluorinated ones, with ligand L' = (Ar)NC(Me)CH(2)CO(CH(3)) [MoO(2)(L')(2)] (9) and [MoO(N(t)Bu)(L')(2)] (10), respectively. Thermodynamic activation parameters ΔH(?) and ΔS(?) of the OAT reactions for complexes 2 and 4 have been determined. The activation enthalpy for the reaction employing 2 is significantly smaller (12.3 kJ/mol) compared to the reaction with the nonfluorinated complex 9 (60.8 kJ/mol). The change of the entropic term ΔS(?) is small. The reaction of the oxo-imido complex 4 to 8 revealed a significant electron-donating contribution of the imido substituent.     

Bis(phosphino)borates: a new family of monoanionic chelating phosphine ligands

The reaction of dimethyldiaryltin reagents Me(2)SnR(2) (R = Ph (1), p-MePh (2), m,m-Me(2)Ph (3), p-(t)BuPh (4), p-MeOPh (5), p-CF(3)Ph (6)) with BCl(3) provided a high-yielding, simple preparative route to the corresponding diarylchloroboranes R(2)BCl (R = Ph (10), p-MePh (11), m,m-Me(2)Ph (12), p-(t)BuPh (13), p-MeOPh (14), p-CF(3)Ph (15)). In some cases, the desired diarylchloroborane was not formed from an appropriate tin reagent Me(2)SnR(2) (R = o-MeOPh (7), o,o-(MeO)(2)Ph (8), o-CF(3)Ph (9)). The reaction of lithiated methyldiaryl- or methyldialkylphosphines with diarylchloroboranes or dialkylchloroboranes is discussed. Specifically, several new monoanionic bis(phosphino)borates are detailed: [Ph(2)B(CH(2)PPh(2))(2)] (25); [(p-MePh)(2)B(CH(2)PPh(2))(2)] (26); [(p-(t)BuPh)(2)B(CH(2)PPh(2))(2)] (27); [(p-MeOPh)(2)B(CH(2)PPh(2))(2)] (28); [(p-CF(3)Ph)(2)B(CH(2)PPh(2))(2)] (29); [Cy(2)B(CH(2)PPh(2))(2)] (30); [Ph(2)B(CH(2)P[p-(t)BuPh](2))(2)] (31); [(p-MeOPh)(2)B(CH(2)P[p-(t)BuPh](2))(2)] (32); [Ph(2)B(CH(2)P[p-CF(3)Ph](2))(2)] (33); [Ph(2)B(CH(2)P(BH(3))(Me)(2))(2)] (34); [Ph(2)B(CH(2)P(S)(Me)(2))(2)] (35); [Ph(2)B(CH(2)P(i)Pr(2))(2)] (36); [Ph(2)B(CH(2)P(t)Bu(2))(2)] (37); [(m,m-Me(2)Ph)(2)B(CH(2)P(t)Bu(2))(2)] (38). The chelation of diarylphosphine derivatives 25-33 and 36 to platinum was examined by generation of a series of platinum dimethyl complexes. The electronic effects of substituted bis(phosphino)borates on the carbonyl stretching frequency of neutral platinum alkyl carbonyl complexes were studied by infrared spectroscopy. Substituents remote from the metal center (i.e. on boron) have minimal effect on the electronic nature of the metal center, whereas substitution close to the metal center (on phosphorus) has a greater effect on the electronic nature of the metal center.     

One-pot synthesis of metal primary phosphine complexes from O=PCl2R or PCl2R. Isolation and characterization of primary alkylphosphine complexes of a metalloporphyrin

Treatment of [Ru(II)(Por)(CO)] [Por = porphyrinato(2-)] and O=PCl(2)R [R = Ad (adamantyl), Bu(t), Bu(sec)] or PCl2Mes (Mes = mesityl) with LiAlH4 afforded primary alkyl- and arylphosphine complexes [Ru(II)(Por)(PH2R)2], which have been isolated in pure form and characterized by 1H NMR, 31P NMR, IR, and UV-vis spectroscopy and mass spectrometry. The structures of [Ru(II)(TTP)(PH2Ad)2] and [Ru(II)(F20-TPP)(PH2Mes)2] were determined by X-ray crystallography.     

Solution structures and dynamic properties of chelated d(0) metal olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) (R = H, Me): Models for the [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" catalysts.

To model the Ti-olefin interaction in the putative [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" Ti-catalyzed olefin polymerization, chelated alkoxide olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) have been investigated. The reaction of [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(2) (1a,b; R = H, Me) with HOCMe(2)CH(2)CH(2)CH=CH(2) yields mixtures of [eta(5)-C(5)R(4)SiMe(2)NH(t)Bu]TiMe(2)(OCMe(2)CH(2)CH(2)CH=CH(2)) (2a,b) and [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(OCMe(2)CH(2)CH(2)CH=CH(2)) (3a,b). The reaction of 2a/3a and 2b/3b mixtures with B(C(6)F(5))(3) yields the chelated olefin complexes [[eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][MeB(C(6)F(5))(3)] (4a,b; 71 and 89% NMR yield). The reaction of 2b/3b with [Ph(3)C][B(C(6)F(5))(4)] yields [[eta(5): eta(1)-C(5)Me(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][B(C(6)F(5))(4)] (5b, 88% NMR yield). NMR studies establish that 4a,b and 5b exist as mixtures of diastereomers (isomer ratios: 4a/4a', 62/38; 4b/4b', 75/25; 5b/5b', 75/25), which differ in the enantioface of the olefin that is coordinated. NMR data for these d(0) metal olefin complexes show that the olefin coordinates to Ti in an unsymmetrical fashion primarily through C(term) such that the C=C pi bond is polarized with positive charge buildup on C(int). Dynamic NMR studies show that 4b/4b' undergoes olefin face exchange by a dissociative mechanism which is accompanied by fast inversion of configuration at Ti ("O-shift") in the olefin-dissociated intermediate. The activation parameters for the conversion of 4b to 4b' (i.e., 4b/4b' face exchange) are: DeltaH = 17.2(8) kcal/mol; DeltaS = 8(1) eu. 4a/4a' also undergoes olefin face exchange but with a lower barrier (DeltaH = 12.2(9) kcal/mol; DeltaS = -2(3) eu), for the conversion of 4a to 4a'.     

Synthesis and characterization of diiron dithiolate complexes containing a quinoxaline bridge

A potential model complex for the hydrogenase active site, [Fe(2){(μ-CH(2)S)(2)R}(CO)(6)] (1) (R = quinoxaline), was synthesized by condensation of [(μ-LiS)(2)Fe(2)(CO)(6)] with 2,3-bis(bromomethyl)quinoxaline. Reactions of 1 with bis(diphenylphosphino)methane (dppm) under a range of conditions yielded substituted complexes [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(dppm)] (2), [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(k(2)-dppm)] (3) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(μ-dppm)] (4). X-ray crystallography confirms that in 2, the dppm is terminally bonded to an iron atom via one phosphorus atom, whereas in 3, it acts as a chelating ligand to coordinate to an iron center in a dibasal-substituted manner. In 4, the dppm bridges the two iron atoms in a cis basal/basal fashion with one phosphorus bonded to each iron atom. Treatment of 1 with various tertiary phosphines at room temperature in acetonitrile (MeCN) generates a range of mono-substituted products [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)L] (5, L = PEt(3); 6, PMe(3); 7, PPh(3); 8, Me(2)PPh). With Bu(t)NC, mono- and di-substituted [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(Bu(t)NC)] (9) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(Bu(t)NC)(2)] (10) complexes are generated. All the complexes were characterized by elemental analysis, IR, MS and NMR spectroscopy. IR and NMR spectroscopic studies suggest that addition of excess HBF(4)·OEt(2) acid to 1-4 led to the protonation of quinoxaline nitrogen atoms. In contrast, 5-10 were not stable in acidic media. Electrochemistry of 1-4 was investigated in the acetonitrile medium (0.1 M Bu(4)NPF(6)). The electrochemical instability of the reduced ligand, quinoxaline, and the reduced forms of these complexes revealed from the electrochemical studies suggests that they do not provide ideal models of the hydrogenase active site.     

1,1-ethylenedithiolato complexes of palladium(II) and platinum(II) with isocyanide and carbene ligands

The reactions of [Tl(2)[S(2)C=C[C(O)Me](2)]](n) with [MCl(2)(NCPh)(2)] and CNR (1:1:2) give complexes [M[eta(2)-S(2)C=C[C(O)Me](2)](CNR)(2)] [R = (t)Bu, M = Pd (1a), Pt (1b); R = C(6)H(3)Me(2)-2,6 (Xy), M = Pd (2a), Pt (2b)]. Compound 1b reacts with AgClO(4) (1:1) to give [[Pt(CN(t)Bu)(2)](2)Ag(2)[mu(2),eta(2)-(S,S')-[S(2)C=C[C(O)Me](2)](2)]](ClO(4))(2) (3). The reactions of 1 or 2 with diethylamine give mixed isocyanide carbene complexes [M[eta(2)-S(2)C=C[C(O)Me](2)](CNR)[C(NEt(2))(NHR)]] [R = (t)Bu, M = Pd (4a), Pt (4b); R = Xy, M = Pd (5a), Pt (5b)] regardless of the molar ratio of the reagents. The same complexes react with an excess of ammonia to give [M[eta(2)-(S,S')-S(2)C=C[C(O)Me](2)](CN(t)Bu)[C(NH(2))(NH(t)Bu)]] [M = Pd (6a), Pt (6b)] or [M[eta(2)-(S,S')-S(2)C=C[C(O)Me](2)][C(NH(2))(NHXy)](2)] [M = Pd (7a), Pt (7b)] probably depending on steric factors. The crystal structures of 2b, 4a, and 4b have been determined. Compounds 4a and 4b are isostructural. They all display distorted square planar metal environments and chelating planar E,Z-2,2-diacetyl-1,1-ethylenedithiolato ligands that coordinate through the sulfur atoms.     

Lithiation of (tBuNH)3PNSiMe3 and formation of tetraimidophosphate complexes containing M3O3 rings (M = Li, K): X-ray structure of the stable radical [(Me3SiN)P(mu3-N(t)Bu)3[mu3-Li(THF)]3(OtBu))

The reaction of ((t)BuNH)(3)PNSiMe(3) (1) with 1 equiv of (n)BuLi results in the formation of Li[P(NH(t)Bu)(2)(N(t)Bu)(NSiMe(3))] (2); treatment of 2 with a second equivalent of (n)BuLi produces the dilithium salt Li(2)[P(NH(t)Bu)(N(t)Bu)(2)(NSiMe(3))] (3). Similarly, the reaction of 1 and (n)BuLi in a 1:3 stoichiometry produces the trilithiated species Li(3)[P(N(t)Bu)(3)(NSiMe(3))] (4). These three complexes represent imido analogues of dihydrogen phosphate [H(2)PO(4)](-), hydrogen phosphate [HPO(4)](2)(-), and orthophosphate [PO(4)](3)(-), respectively. Reaction of 4 with alkali metal alkoxides MOR (M = Li, R = SiMe(3); M = K, R = (t)Bu) generates the imido-alkoxy complexes [Li(3)[P(N(t)Bu)(3)(NSiMe(3))](MOR)(3)] (8, M = Li; 9, M = K). These compounds were characterized by multinuclear ((1)H, (7)Li, (13)C, and (31)P) NMR spectroscopy and, in the cases of 2, 8, and 9.3THF, by X-ray crystallography. In the solid state, 2 exists as a dimer with Li-N contacts serving to link the two Li[P(NH(t)Bu)(2)(N(t)Bu)(NSiMe(3))] units. The monomeric compounds 8 and 9.3THF consist of a rare M(3)O(3) ring coordinated to the (LiN)(3) unit of 4. The unexpected formation of the stable radical [(Me(3)SiN)P(mu(3)-N(t)Bu)(3)[mu(3)-Li(THF)](3)(O(t)Bu)] (10) is also reported. X-ray crystallography indicated that 10 has a distorted cubic structure consisting of the radical dianion [P(N(t)Bu)(3)(NSiMe(3))](.2)(-), two lithium cations, and a molecule of LiO(t)Bu in the solid state. In dilute THF solution, the cube is disrupted to give the radical monoanion [(Me(3)SiN)((t)BuN)P(mu-N(t)Bu)(2)Li(THF)(2)](.-), which was identified by EPR spectroscopy.     

Bis(alkylamido)phenylborane complexes of zirconium,hafnium, and vanadium

The coordination chemistry of the bis(tert-butylamido)phenylborane ligand, [(t)BuN-B(Ph)-N(t)Bu](2)(-), is developed. The ligand can be delivered to metals of groups 4 and 5 from its dilithio salt. The reactions of PhB((t)BuNLi)(2), 1, with metal halides of zirconium, hafnium, and vanadium generate complexes of the general formulas ((t)BuN-B(Ph)-N(t)Bu)(2)M(THF) (M = Zr (2), Hf (3)), Li(2)[M((t)BuN-B(Ph)-N(t)Bu)(3)] (M = Zr (4), Hf (5)), and M((t)BuN-B(Ph)-N(t)Bu)(2) (M = V (6)). (1)H and (11)B[(1)H] NMR and single-crystal X-ray analysis show that these amido metal complexes are structurally analogous to amidinates.