One pot,three component synthesis of spiroindenoquinoxaline pyrrolidine fused nitrochromene derivatives following 1,3-dipolar cycloaddition

An expedient one-pot sequential three-component synthesis of a series of diverse spiroindenoquinoxaline pyrrolidine fused nitrochromene derivatives following 1,3-dipolar cycloaddition of azomethine ylides generated in situ by the condensation of indenoquinoxalone and α-amino acids (L-proline and L-phenyl alanine) with 3-nitrochromenes as dipolarophile under classical as well as microwave irradiation is described. The protocol provides a mild reaction condition, high yield of the products, high regioselectivity, and operational simplicity to assemble complex structural entity in a single operation with good to excellent yield. The regio and stereochemical outcome of the cycloaddition reaction is ascertained by spectroscopic and single crystal X-ray analysis.     

A new synthesis of 1,2,3,5‐tetrahydroimidazo[2,3‐b]‐[1,3]benzodiazocines

A new synthesis of 6‐carbomethoxy‐1,2,3,5‐tetrahydroirnidazo[2,3‐b][1,3]benzodiazocines 13 by the intramolecular cycloaddition reaction of methyl 2‐(1‐aziridinylmethyl)‐3‐(2‐ureidophenyl)propenoates 10 under Appel's dehydration conditions is described. The latter were readily obtained from 2‐nitrobenzalde‐hyde with methyl acrylate through the Baylis‐Hillman reaction.     

Microwave‐assisted synthesis and diels–alder reactions of 1,3‐azaphospholo[5,1‐a]isoquinolines

The application of microwave technique has been extended successfully for the first time to the synthesis of a representative class of azaphospholes, viz. 1,3‐bis(alkoxycarbonyl)‐1,3‐azaphospholo[5,1‐a]isoquinolines ( 2 ), which occurs rapidly giving higher yields. Stereoselectivity is observed in the reaction with 2,3‐dimethyl‐1,3‐butadiene, and isoprene reacts regioselectively as well. 1‐Methyl‐3‐ethoxycarbonyl‐1,3‐azaphospholo[1,5‐a]pyridine ( 4 ) remains inert toward [2+4] cycloaddition. The nonoccurrence of the Diels–Alder reaction in the latter case has been supported by semiempirical PM3 calculations. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:560–563, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10193     

An Efficient Synthesis of Mono and Bis‐1,2,3‐triazole AZT Derivatives via Copper(I)‐catalyzed Cycloaddition

An efficient synthesis of novel mono and bis‐1,2,3‐triazoles 3′‐azido‐2′‐deoxythymidine (AZT) derivatives via copper(I)‐catalyzed 1,3‐dipolar cycloaddition reaction is described. Starting from AZT and terminal alkyne derivatives, mono and bis‐1,2,3‐triazole AZT derivatives are regioselectively obtained in good yields under mild conditions using CuSO4·5H2O and sodium ascorbate as a catalyst system, and t‐BuOH/H₂O (1:1, v/v) as a co‐solvent. The structures of these compounds were elucidated by IR, HR MS and NMR.     

Copper‐catalyzed Synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde by Step‐wise and One‐pot Three‐component Huisgen's 1,3‐dipolar Cycloaddition Reaction

An efficient method for the synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde has been developed starting from oxindole and indole using Huisgen's 1,3‐dipolar cycloaddition reaction of organic azides to alkynes. The effect of catalysts and solvent on these reactions has been investigated. Among all these conditions, while using CuSO₄·5H₂O, DMF was found to be the best system for this reaction. It could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of halides, azides, and alkynes. The Huisgen's 1,3‐dipolar cycloaddition reaction was performed using CuSO₄·5H₂O in DMF with easy work‐up procedure.     

On the Enantioselectivity of Transition Metal‐Catalyzed 1,3‐Cycloadditions of 2‐Diazocyclohexane‐1,3‐diones

The formal 1,3‐cycloaddition of 2‐diazocyclohexane‐1,3‐diones 1a –1 d to acyclic and cyclic enol ethers in the presence of Rh^II‐catalysts to afford dihydrofurans has been investigated. Reaction with a cis/trans mixture of 1‐ethoxyprop‐1‐ene ( 13a ) yielded the dihydrofuran 14a with a cis/trans ratio of 85 : 15, while that with (Z)‐1‐ethoxy‐3,3,3‐trifluoroprop‐1‐ene ( 13b ) gave the cis‐product 14b exclusively. The stereochemical outcome of the reaction is consistent with a concerted rather than stepwise mechanism for cycloaddition. The asymmetric cycloaddition of 2‐diazocyclohexane‐1,3‐dione ( 1a ) or 2‐diazodimedone (=2‐diazo‐5,5‐dimethylcyclohexane‐1,3‐dione; 1b ) to furan and dihydrofuran was investigated with a representative selection of chiral, nonracemic Rh^II catalysts, but no significant enantioselectivity was observed, and the reported enantioselective cycloadditions of these diazo compounds could not be reproduced. The absence of enantioselectivity in the cycloadditions of 2‐diazocyclohexane‐1,3‐diones is tentatively explained in terms of the Hammond postulate. The transition state for the cycloaddition occurs early on the reaction coordinate owing to the high reactivity of the intermediate metallocarbene. An early transition state is associated with low selectivity. In contrast, the transition state for transfer of stabilized metallocarbenes occurs later, and the reactions exhibit higher selectivity.     

Highly Enantioselective Intramolecular 1,3‐Dipolar Cycloaddition: A Route to Piperidino‐Pyrrolizidines

Enantioselective catalytic intermolecular 1,3‐dipolar cycloadditions are powerful methods for the synthesis of heterocycles. In contrast, intramolecular enantioselective 1,3‐dipolar cycloadditions are virtually unexplored. A highly enantioselective synthesis of natural‐product‐inspired pyrrolidino‐piperidines by means of an intramolecular 1,3‐dipolar cycloaddition with azomethine ylides is now reported. The method has a wide scope and yields the desired cycloadducts with four tertiary stereogenic centers with up to 99 % ee. Combining the enantioselective catalytic intramolecular 1,3‐dipolar cycloaddition with a subsequent diastereoselective intermolecular 1,3‐dipolar cycloaddition yielded complex piperidino‐pyrrolizidines with very high stereoselectivity in a one‐pot tandem reaction.     

Reactions of Acid Chlorides/Ketenes with 2‐Substituted 4,5‐Dihydro‐4,4‐dimethyl‐1,3‐thiazoles: Formation of Penam Derivatives

Addition reactions of acid chlorides with various 2‐substituted 4,5‐dihydro‐4,4‐dimethyl‐5‐(methylsulfanyl)‐1,3‐thiazoles under basic conditions were studied. Two kinds of products were obtained from these additions, β‐lactams and non‐β‐lactam adducts. When the reaction was carried out with 4,5‐dihydro‐1,3‐thiazoles with a Ph substituent at C(2), the reaction proceeded via formal [2+2] cycloaddition and led to the correspoding β‐lactam. On the other hand, acid chlorides and 4,5‐dihydro‐1,3‐thiazoles bearing an α‐H‐atom at the C(2)‐substituent underwent C(α)‐ and/or N‐addition reactions and furnished non‐β‐lactam adducts, i.e., C(α)‐ and/or N‐acylated 1,3‐thiazolidines. The attempted transformations of sulfonyl esters of exo‐6‐hydroxy penams to endo‐6‐azido penams failed, although they were successful with mono‐β‐lactams under the same conditions.     

An Efficient Synthesis of 3‐(1H‐Tetrazol‐5‐yl)coumarins (=3‐(1H‐Tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) via Domino Knoevenagel Condensation,Pinner Reaction,and 1,3‐Dipolar Cycloaddition in Water

A novel straightforward synthesis of 3‐(1H‐tetrazol‐5‐yl)coumarins (=3‐(1H‐tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) 6 via domino Knoevenagel condensation, Pinner reaction, and 1,3‐dipolar cycloaddition of substituted salicylaldehydes (=2‐hydroxybenzaldehydes), malononitrile (propanedinitrile), and sodium azide in H₂O is reported (Scheme 1 and Table 2). This general protocol provides a wide variety of 3‐(1H‐tetrazol‐5‐yl)coumarins in good yields under mild reaction conditions.     

Ring Expansion of Epoxides under Brønsted Base Catalysis: Formal [3+2] Cycloaddition of β,γ‐Epoxy Esters with Imines Providing 2,4,5‐Trisubstituted 1,3‐Oxazolidines

A novel ring‐expansion reaction of epoxides under Brønsted base catalysis was developed. The formal [3+2] cycloaddition reaction of β,γ‐epoxy esters with imines proceeds in the presence of triazabicyclodecene (TBD) as a superior Brønsted base catalyst to afford 2,4,5‐trisubstituted 1,3‐oxazolidines in a highly diastereoselective manner. This reaction involves the ring opening of the epoxides with the aid of the Brønsted base catalyst to generate α,β‐unsaturated esters having an alkoxide at the allylic position, which would formally serve as a synthetic equivalent of the 1,3‐dipole, followed by a cycloaddition reaction with imines in a stepwise fashion. This methodology enables the facile synthesis of enantioenriched 1,3‐oxazolidines from easily accessible enantioenriched epoxides.     

One‐pot Regioselective Synthesis of Novel 1‐N‐Methyl‐spiro[2,3′]oxindole‐spiro[3,3″]‐1″‐N‐arylpyrrolidine‐2″,5″‐dione‐4‐arylpyrrolidines through Multicomponent 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylide

An atom economic and facile synthesis of novel dispiro–oxindole–pyrrolidines has been achieved via a three‐component tandem cycloaddition of azomethine ylide generated in situ from isatin and sarcosine by decarboxylative condensation with N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐dione derivatives as dipolarophiles. The salient features of synthetic procedure are characterized by the mild reaction conditions, high yields, high regioselectivity and stereoselectivity, one‐pot procedure, and operational simplicity. This regioselectivity was assumed to be under the influence of π–π stacking interactions between the aromatic rings of azomethine ylide and N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐diones that further control the exo–endo selectivity of the reaction 1,3‐dipolar cycloaddition. The regiochemistry and structures of the cycloadducts were determined with spectroscopic data.     

Reversible 1,3‐dipolar cycloaddition of dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate with dimethyl acetylenedicarboxylate

It was shown that dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate ( 2 ) and dimethyl acetylenedicarboxylate (DMAD) undergo a 1,3‐dipolar cycloaddition to produce a short‐lived ylide intermediate ( 3 ). The 1,3‐dipolar cycloaddition took place even at room temperature, although sluggishly, but took place much more rapidly under application of a high pressure of 500 MPa. The 1,3‐dipolar cycloaddition is reversible and the ylide 3 immediately splits into 2 and DMAD. When the reaction of 2 with DMAD was carried out at room temperature without solvent, a spiro‐1,3‐dithiole ( 11 ) was formed in 11% yield, whereas the reaction at 150°C provided a thiophene derivative ( 13 ) in 41% yield. It was found that 11 undergoes a thermal rearrangement to 13 . Results of attempted chemical trapping of the ylide 3 are also reported. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:434–440, 2000     

One‐Pot Synthesis of Dispiro[oxindole‐3,3′‐pyrrolidines] by Three‐Component [3+2] Cycloadditions of in situ‐Generated Azomethine Ylides with 3‐Benzylidene‐2,3‐dihydro‐1H‐indol‐2‐ones

An efficient one‐pot, three‐component synthesis of novel dispiro[oxindole‐3,3′‐pyrrolidines] by 1,3‐dipolar cycloaddition of azomethine ylides, in situ generated by reaction of 1,2‐diones with sarcosine and subsequent decarboxylation, with a series of (E)‐3‐benzylidene‐2,3‐dihydro‐1H‐indol‐2‐ones is reported. Molecular complexity is generated in only one synthetic step. All reactions proceed with excellent regioselectivity and in good‐to‐excellent yields. The workup is easy, the reaction times are short, and no catalyst is required.     

Synthesis of 5H‐1,2,3‐triazolo[4,3‐a][2]benzazepines from the baylis‐hillman adducts of 2‐alkynylbenzaldehydes

The facile synthesis of 5H‐1,2,3‐triazolo[4,3‐a][2]benzazepines 5a‐d by the intramolecular 1,3‐dipolar cycloaddition reaction of 2‐alkynylphenylallyl azides 4a‐d is described. The latter were readily obtained from 2‐alkynylbenzaldehydes 1a‐d through the Baylis‐Hillman adducts 2a‐d followed by acetylation to compounds 3a‐d and nucleophilic substitution by azide to compounds 4a‐d.     

Cross‐Cycloaddition of Two Different Isocyanides: Chemoselective Heterodimerization and [3+2]‐Cyclization of 1,4‐Diazabutatriene

A new cross‐cycloaddition reaction between a wide range of isocyanides and 2‐isocyanochalcones (or analogues) was developed for the expeditious synthesis of pyrrolo[3,4‐b]indoles under thermal conditions. On the basis of the experimental results and DFT calculations, a mechanism for this domino reaction is proposed involving chemoselective heterodimerization of two different isocyanides to form 1,4‐diazabutatriene intermediates, followed by an intramolecular [3+2]‐cycloaddition and 1,3‐proton shift.     

Novel Synthesis of 2‐Alkylquinolizinium‐1‐olates and Their 1,3‐Dipolar Cycloaddition Reactions with Acetylenes

Several 2‐alkylquinolizinium‐1‐olates 9 , i.e., heterobetaines, were prepared from ketone 11 , the latter being readily available either from pyridine‐2‐carbaldehyde via a Grignard reaction, followed by oxidation with MnO₂, or from 2‐picolinic acid (=pyridine‐2‐carboxylic acid) via the corresponding Weinreb amide and subsequent Grignard reaction. Mesoionic heterobetaines such as quinolizinium derivatives have the potential to undergo cycloaddition reactions with double and triple bonds, e.g., 1,3‐dipolar cycloadditions or Diels? Alder reactions. We here report on the scope and limitations of cycloaddition reactions of 2‐alkylquinolizinium‐1‐olates 9 with electron‐poor acetylene derivatives. As main products of the reaction, 5‐oxopyrrolo[2,1,5‐de]quinolizines (=‘[2.3.3]cyclazin‐5‐ones’) 19 were formed via a regioselective [2+3] cycloaddition, and cyclohexadienone derivatives, formed via a Diels? Alder reaction, were obtained as side products. The structures of 2‐benzylquinolizinium‐1‐olate ( 9a ) and two ‘[2.3.3]cyclazin‐5‐ones’ 19i and 19l were established by X‐ray crystallography.     

1,3‐Dipolar cycloadditions of 9‐diazofluorenes and diphenyldiazomethane to 2‐acyl‐2H‐1,2,3‐diazaphospholes

A series of 2‐acyl‐2H‐1,2,3‐diazaphospholes 3 underwent ready 1,3‐dipolar cycloaddition reactions with 9‐diazofluorenes as the 1,3‐dipole, yielding the respective bicyclic phosphiranes 5 or trimers 7 depending on the reaction conditions employed. The reaction is believed to proceed via the formation of the [3+2]‐cycloaddition adducts followed by elimination of nitrogen from the cyclic azo moiety. In the case of 3c , the phosphatetraazabicyclooctadiene compound 6 has been isolated with no loss of nitrogen. Likewise, the dipolar cycloaddition reaction of diphenyldiazomethane with the >C?P‐ moiety as the 1,3‐dipolarophile gave phosphadiazabicyclohexenes 8 in 32–68% yields.     

Enantioselective Formal [3+2] Cycloaddition of Epoxides with Imines under Brønsted Base Catalysis: Synthesis of 1,3‐Oxazolidines with Quaternary Stereogenic Center

The formal [3+2] cycloaddition of epoxides and unsaturated compounds is a powerful methodology for the synthesis of densely functionalized five‐membered heterocyclic compounds containing oxygen. Described is a novel enantioselective formal [3+2] cycloaddition of epoxides under Brønsted base catalysis. The bis(guanidino)iminophosphorane as a chiral organosuperbase catalyst enabled the enantioselective reaction of β,γ‐epoxysulfones with imines, owing to its strong basicity and high stereocontrolling ability, to provide enantioenriched 1,3‐oxazolidines having two stereogenic centers, including a quaternary one, in a highly diastereo‐ and enantioselective manner.     

Stereoselective Synthesis of 1,2,3‐Triazolooxazine and Fused 1,2,3‐Triazolo‐δ‐Lactone Derivatives

The stereoselective synthesis of 1,2,3‐triazolooxazine and fused 1,2,3‐triazolo‐δ‐lactone by applying chemoenzymatic methods is described. trans‐2‐Azidocyclohexanol was successfully resolved by Novozyme 435 with an ee value of 99%. Installation of the alkyne moiety on the enantiomerically enriched azidoalcohol by O‐alkylation, followed by intramolecular azide? alkyne [3+2] cycloaddition resulted in the desired 1,2,3‐triazolooxazine derivative. Enantiomerically pure azidocyclohexanol was also subjected to the Huisgen 1,3‐dipolar cycloaddition reaction with dimethylacetylene dicarboxylate, followed by intramolecular cyclization of the corresponding cycloadduct, to furnish a fused 1,2,3‐triazolo‐δ‐lactone.     

Iodine‐Promoted Synthesis of 1‐Alkyl‐3‐aroylindolizines from N‐(Aroylmethyl)pyridinium Salts and Aliphatic Aldehydes

An effective and practical method has been developed for the diversity‐oriented synthesis of 1‐alkyl‐3‐aroylindolizines via the 1,3‐dipolar cycloaddition of pyridinium ylides and aliphatic aldehydes in the presence of molecular iodine and a catalytic amount of MnO₂. The synthesis proceeds by tandem reactions involving [3+2] cycloaddition, dehydration of the cycloadduct, and dehydroaromatization. Molecular iodine served both as a catalyst and a dehydroaromatization reagent in the reaction.