Improved surface‐enhanced Raman scattering properties of TiO2 nanoparticles by Zn dopant

In this paper, pure and Zn‐doped TiO₂ nanoparticles (NPs) with various content of Zn were prepared by a sol–hydrothermal method and were employed as active substrates for surface‐enhanced Raman scattering (SERS). On the 3% Zn‐doped TiO₂ substrate, 4‐mercaptobenzoic acid(4‐MBA) molecules exhibit a higher SERS intensity by a factor of 6, as compared with the native enhancement of 4‐MBA adsorbed on undoped TiO₂ NPs. Moreover, the higher SERS activity was still observed on the 3% Zn‐doped TiO₂ NPs at temperature even up to 125 °C. These results indicate that an appropriate amount of Zn doping can improve the SERS performances of TiO₂ SERS‐active substrates. The introduction of Zn dopant can enrich the surface states (defects) of TiO₂ and improve the separation efficiency of photo‐generated charge carriers (electrons and holes) in TiO₂, according to measurements of X‐ray diffraction, UV‐visible diffuse reflectance spectroscopy, and photoluminescence, which are responsible for the influence of Zn dopant on the improved SERS performances of TiO₂ NPs. Copyright © 2009 John Wiley & Sons, Ltd.     

Substrate‐Induced Synthesis of Nitrogen‐Doped Holey Graphene Nanocapsules for Advanced Metal‐Free Bifunctional Electrocatalysts

The development of efficient metal‐free electrocatalysts for oxygen electrocatalysis is of great significance for various energy conversion devices. Herein, novel nitrogen‐doped holey graphene nanocapsules (NHGNs) are reported prepared by self‐assembly of graphene oxide nanosheets on the surface of amino‐functionalized silica template and NH₃ activation with simultaneously enhanced nitrogen doping and etching of nanopores in graphene, followed by template etching. The silica template is demonstrated to show a substrate‐enhanced effect on nitrogen doping and etching of nanopores in graphene based on density functional theory calculations. Benefiting from the large surface area, unique pore distribution, and high surface functionality of nitrogen doping, the resulting NHGNs exhibit superior bifunctional electrocatalytic activity and durability for both oxygen reduction reaction and oxygen evolution reaction, which is similar to that of the commercial Pt/C and RuO₂ electrocatalysts, respectively. This work presents an advance in developing new nitrogen‐doped graphene species for highly efficient metal‐free electrocatalysis.     

Micro‐Raman investigation of transition‐metal‐doped ZnO nanoparticles

We measured the Raman spectra of ZnO nanoparticles (ZnO‐NPs), as well as transition‐metal‐doped (5% Mn(II), Fe(II) or Co(II)) ZnO nanoparticles, with an average size of 9 nm. A typical Raman peak at 436 cm⁻¹ is observed in the ZnO‐NPs, whereas Zn_1−xMn_xO, Zn_1−xFe_xO and Zn_1−xCo_xO presented characteristic peaks at 661, 665 and 675 cm⁻¹, respectively. These peaks can be related to the formation of Mn₃O₄, Fe₃O₄ and Co₃O₄ species in the doped ZnO‐NPs. Moreover, these samples were analyzed at various laser powers. Here, we observed new vibrational modes (512, 571 and 528 cm⁻¹), which are specific to Mn, Fe and Co dopants, respectively, and ZnO‐NPs did not reveal any additional modes. The new peaks were interpreted either as disorder activated phonon modes or as local vibrations of Mn‐, Fe‐ and Co‐related complexes in ZnO. Copyright © 2007 John Wiley & Sons, Ltd.     

Selective Etching of N‐Doped Graphene Meshes as Metal‐Free Catalyst with Tunable Kinetics,High Activity and the Origin of New Catalytic Behaviors

New N‐doped reduced graphene oxide (N‐RGO) meshes are facile fabricated by selective etching of 3–5 nm nanopores, with controllable doping of N dopants at an ultrahigh N/C ratio up to 15.6 at%, from pristine graphene oxide sheets in one‐pot hydrothermal reaction. The N‐RGO meshes are illustrated to be an efficient metal‐free catalyst toward hydrogenation of 4‐nitrophenol, with new catalytic behaviors emerging in following three aspects: (i) tunable kinetics following pseudofirst order from commonly observed pseudozero order; (ii) strikingly improved activity with 26‐fold increased rate constant (1.0 s⁻¹ g⁻¹ L); (iii) no induction time required prior to reaction due to depressed back conversion, and dramatically decreased apparent activation energy (E_a) (17 kJ mol⁻¹). The origin of these new catalytic properties can be assigned to the synergetic effects between graphitic N doping and structural defects arising from nanopores. Deeper understanding unveils that the concentration of graphitic N is inverse proportion to E_a, while the pyrrolic N has no impact on this reaction, and oxygenate groups hampers it. The porous nature allows the N‐RGO meshes to conduct catalyze reactions in continuous flow fashion.     

Surface‐enhanced Raman scattering of molecules adsorbed on Co‐doped ZnO nanoparticles

Transition‐metal‐doped semiconductor nanoparticles (NPs) have been well studied for their optical and catalytic properties but seldom studied by surface‐enhanced Raman scattering (SERS). In this paper, transition‐metal‐doped semiconductor NPs are investigated for their SERS property. Four groups of Co‐doped (0.5, 1, 3, and 5%) ZnO (Co ZnO) NPs and pure ZnO NPs were synthesized and studied. When 4‐mercaptobenzoic acid was used as probing molecule, significant SERS signals were obtained on all the five samples. Moreover, it is very interesting to observe a relationship between the Co‐doping concentration and enhancement of the SERS signals. SERS intensities first increase with doping concentration (up to 1%), and then decrease with further increase in doping concentration (up to 5%). Charge transfer (CT) is considered to be the main contribution to this phenomenon. Different CT ratios from substrates to molecules seem to induce different intensities of the SERS signals. In our experiments, the crystalline defects of Co ZnO NPs caused by the Co dopant affect the CT ratios. A possible mechanism of CT from the valance band of Co ZnO NPs to the lower unoccupied molecular orbital of the molecules via energy of the surface states is suggested. X‐ray photoelectron spectra, UV vis spectra, and Raman spectra were used to characterize the structure and defects in Co ZnO NPs. Copyright © 2011 John Wiley & Sons, Ltd.     

Ion implantation into amorphous Si layers to form carrier‐selective contacts for Si solar cells

This paper reports our findings on the boron and phosphorus doping of very thin amorphous silicon layers by low energy ion implantation. These doped layers are implemented into a so‐called tunnel oxide passivated contact structure for Si solar cells. They act as carrier‐selective contacts and, thereby, lead to a significant reduction of the cell's recombination current. In this paper we address the influence of ion energy and ion dose in conjunction with the obligatory high‐temperature anneal needed for the realization of the passivation quality of the carrier‐selective contacts. The good results on the phosphorus‐doped (implied V_oc = 725 mV) and boron‐doped passivated contacts (iV_oc = 694 mV) open a promising route to a simplified interdigitated back contact (IBC) solar cell featuring passivated contacts. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

A Facile Strategy to Synthesize Cobalt‐Based Self‐Supported Material for Electrocatalytic Water Splitting

Designing and developing active, robust, and noble‐metal‐free catalysts with superior stability for electrocatalytic water splitting is of critical importance but remains a grand challenge. Here, a facile strategy is provided to synthesize a series of Co‐based self‐supported electrode materials by combining electrospinning and chemical vapor deposition (CVD) technologies. The Co, Co₃O₄, Co₉S₈ nanoparticles (NPs) are formed in situ simultaneously with the formation of carbon nanofibers (CNFs) during the CVD process, respectively. The Co‐based NPs are uniformly distributed through the CNFs and they can be directly used as the electrode materials for hydrogen evolution reaction (HER) in acid and oxygen evolution reaction (OER) in alkaline. The Co₉S₈/CNFs membrane exhibits the best HER activity with overpotential of 165 mV at j = 10 mA cm^?2 and Tafel slope of 83 mV dec^?1 and OER activity with overpotential of 230 mV at j = 10 mA cm^?2 and Tafel slope of 72 mV dec^?1. The onion‐like graphitic layers formed around the NPs not only improve the electrical conductivity of the electrode but also prevent the separation of the NPs from the carbon matrix as well as the aggregation.     

Effect of antimony doping on the low‐temperature performance of solution‐processed indium oxide thin film transistors

The effects of antimony (Sb) doping on solution‐processed indium oxide (InO_x) thin film transistors (TFTs) were examined. The Sb‐doped InSbO TFT exhibited a high mobility, low gate swing, threshold voltage, and high I_ON/OFF ratio of 4.6 cm²/V s, 0.29 V/decade, 1.9 V, and 3 × 10⁷, respectively. The gate bias and photobias stability of the InSbO TFTs were also improved by Sb doping compared to those of InO_x TFTs. This improvement was attributed to the reduction of oxygen‐related defects and/or the existence of the lone‐pair s‐electron of Sb³⁺ in amorphous InSbO films. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Interference of Metal Oxide Nanoparticles with Coagulation Cascade and Interaction with Blood Components

Metal oxide nanoparticles (NPs) are increasingly used for different purposes, showing a potential risk on human health. The analysis of the interaction of these metal oxide NPs with blood components is a crucial step in the characterization of their biocompatibility, but information available of comparative studies with several doses and different metal oxide NPs is really scarce. In this study, six different metal oxide NPs (TiO₂, CeO₂, Al₂O₃, Y₂O₃, and two different types of ZnO NPs) at different concentrations are used, and their potential adverse effects on blood are determined. Both, prothrombin time (PT) and activated partial thromboplastin time (aPTT), are assessed to understand particle influence on the plasma coagulation cascade. Additional hematocompatibility tests include assessment of thrombin coagulation time, platelet aggregation, leukocyte procoagulant activity (PCA), hemolysis, and complement activation. The results demonstrate that only the ZnO and TiO₂ NPs affect the coagulation cascade by increasing the aPTT in a dose‐dependent manner. Moreover, ZnO NPs increase PT, while TiO₂ NPs induce a decrease in the PT. In addition to affecting coagulation time, ZnO NPs also induce platelet aggregation and leukocyte PCA. All tested metal oxide NPs do not affect hemolysis and complement activation.     

Co9S8 Nanoparticles Incorporated in Hierarchically Porous 3D Few‐Layer Graphene‐Like Carbon with S,N‐Doping as Superior Electrocatalyst for Oxygen Reduction Reaction

Electrochemical oxygen reduction reaction (ORR), using nonprecious metal catalysts, has attracted great attention due to the importance in renewable energy technologies, such as fuel cells and metal–air batteries. A simple and scalable synthetic route is demonstrated for the preparation of a novel 3D hybrid nanocatalyst consisting of Co₉S₈ nanoparticles which are incorporated in N,S‐doped carbon (N, S–C) with rational structure design. In particular, the hybrid catalyst is prepared by direct pyrolysis and calcination of a gel mixture of Mg,Co nitrate‐thiourea‐glycine under Ar atmosphere, with subsequent HCl washing. The properties of obtained hybrid catalyst are quite dependent on calcination temperature and added glycine amount. Under a molar ratio of Co5‐Mg15‐tu10‐gl45 and a calcination temperature of 900 °C, Co₉S₈ nanoparticles are embedded in a well‐developed carbon matrix which shows a porous 3D few‐layer graphene‐like N, S–C with open and hierarchical micro–meso–macro pore structure. Because of the synergistic effect between Co₉S₈ nanoparticles and well‐developed carbon support, the composite exhibits high ORR activity close to that of commercial Pt/C catalyst. More importantly, the composite displays superior long‐term stability and good tolerance against methanol. The strategy developed here provides a novel and efficient approach to prepare a cost‐effective and highly active ORR electrocatalyst.     

Multiphonon resonant Raman scattering in N‐doped ZnO

Multiphonon resonant Raman scattering in N‐doped ZnO films was studied, and an enhancement of the resonant Raman scattering process as well as longitudinal optical (LO) phonon overtones up to the sixth order were observed at room temperature. The resonant Raman scattering intensity of the 1LO phonon in N‐doped ZnO appears three times as strong as that of undoped ZnO, which mainly arises from the defect‐induced Raman scattering caused by N‐doping. The nature of the 1LO phonon at 578 cm⁻¹ is interpreted as a quasimode with mixed A₁ and E₁ symmetry because of the defects formed in the ZnO lattice. In addition, the previously neglected impurity‐induced two‐LO‐phonon scattering process was clearly observed in N‐doped ZnO. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Graphene‐Based Phosphorus‐Doped Carbon as Anode Material for High‐Performance Sodium‐Ion Batteries

Graphene‐based phosphorus‐doped carbon (GPC) is prepared through a facile and scalable thermal annealing method by triphenylphosphine and graphite oxide as precursor. The P atoms are successfully doped into few layer graphene with two forms of P–O and P–C bands. The GPC used as anode material for Na‐ion batteries delivers a high charge capacity 284.8 mAh g^?1 at a current density of 50 mA g^?1 after 60 cycles. Superior cycling performance is also shown at high charge?discharge rate: a stable charge capacity 145.6 mAh g^?1 can be achieved at the current density of 500 mA g^?1 after 600 cycles. The result demonstrates that the GPC electrode exhibits good electrochemical performance (higher reversible charge capacity, super rate capability, and long‐term cycling stability). The excellent electrochemical performance originated from the large interlayer distance, large amount of defects, vacancies, and active site caused by P atoms doping. The relationship of P atoms doping amount with the Na storage properties is also discussed. This superior sodium storage performance of GPC makes it as a promising alternative anode material for sodium‐ion batteries.     

Raman investigations of Zn1−xCoxO nanocrystals: role of starting precursors on vibrational properties

The Raman spectra of sol–gel derived Co‐doped ZnO nanoparticles (NPs) in the spectral range 100–1500 cm⁻¹ were investigated. In the sol–gel method, three different series of Co‐doped ZnO particles, i.e. Zn_1−xCo_xO (x = 0.05, 0.10, 0.15, and 0.20), were obtained using three different starting precursors, viz. cobalt chloride hexahydrate, cobalt acetate tetrahydrate, and cobalt nitrate hexahydrate, respectively. It has been observed that cobalt acetate is a better precursor in comparison to cobalt chloride and cobalt nitrate to obtain single‐phase Co‐doped ZnO NPs. As for cobalt acetate‐derived NPs, no hidden secondary phase of Co₃O₄ was observed for the lower (x = 0.05) Co concentration. The Fröhlich interaction associated with the longitudinal modes was found to be destroyed with increasing Co concentration due to structural disorder and defects induced by the dopant. In addition to ZnO and Co₃O₄ vibrational modes, a few additional modes near 550 and 715 cm⁻¹ were also observed in all cases, which could be attributed to the modes due to Co doping in ZnO. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of Micro‐ and Nanoscale LuPO4:Pr3+,Nd3+ with Strong UV‐C Emission to Reduce X‐Ray Doses in Radiation Therapy

UV‐C emitting nanoscale scintillators can be used to sensitize cancer cells selectively against X‐rays during radiation therapy, due to the lethal DNA lesions caused by UV‐C photons. Unfortunately, nanoscale particles (NPs) show decreased UV‐C emission intensity. In this paper, the influence of different Nd³⁺ concentrations on the UV‐C emission of micro‐ and nanoscale LuPO₄:Pr³⁺ is investigated upon X‐ray irradiation and vacuum UV excitation (160 nm). Co‐doped LuPO₄ results in increased UV‐C emission independent of excitation source due to energy transfer from Nd³⁺ to Pr³⁺. The highest UV‐C emission intensity is observed for LuPO₄:Pr³⁺,Nd³⁺(1%,2.5%) upon X‐ray irradiation. Finally, LuPO₄ NPs co‐doped with different dopant concentrations are synthesized, and the biological efficacy of the combined approach (X‐rays and UV‐C) is assessed using the colony formation assay. Cell culture experiments confirm increased cell death compared to X‐rays alone due to the formation of UV‐specific DNA damages, supporting the feasibility of this approach.     

Significantly reduced leakage currents in organic thin film transistors with Mn‐doped Bi2Ti2O7 high‐k gate dielectrics

We report the fabrication of organic thin‐film transistors (OTFTs) with high‐k gate dielectrics of Mn‐doped Bi₂Ti₂O₇ (BTO) films. 3% Mn‐doped BTO films deposited on polymer substrates by pulsed laser deposition at room temperature exhibit low leakage currents of 2.1 × 10^–8 A/cm² at an applied electric field of 0.3 MV/cm, while undoped BTO films show much higher leakage currents of 4.3 × 10^–4 A/cm². Mn doping effectively reduces the number of oxygen vacancies in the films and improves the electrical properties. Low operation voltage and significantly reduced leakage currents are demonstrated in pentacene‐based OTFTs with the Mn‐doped BTO gate dielectrics. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Improved resistive switching phenomena observed in SiNx‐based resistive switching memory through oxygen doping process

The improvement of resistive switching (RS) phenomena of silicon‐nitride (SiN_x)‐based resistive random access memory (ReRAM) cells through oxygen doping process was investigated. As a result, compared to un‐doped SiN_x films, the oxygen doped SiN_x (SiN_x:O₂)‐based ReRAM cells show a lower current (～0.3 μA) level at a high resistance state and a smaller variation of operating voltage through the reduction of leakage current in the SiN_x:O₂ film by combining silicon dangling bonds and doped oxygen ions. Therefore, we believe that the oxygen doping process in SiN_x films can effectively improve the RS characteristics of SiN_x‐based ReRAM cells. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

First‐principles study of the electronic structure and the associated magnetism of carbon‐doped TiO2

Based on first‐principles calculations, the electronic structure and the associated magnetism of carbon‐doped rutile TiO₂ have been investigated in the frame of the generalized gradient approximation (GGA). We find that the carbon substitutional oxygen ions can induce a magnetic moment of about 2.0µ_B/C, but the carbon substitutional titanium cannot provide any magnetism. Graphics of the spin density show that the magnetism is from the structure distortion around the carbon substitutional oxygen ions in the (110) plane of primitive TiO₂. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

One-step reverse precipitation synthesis of water-dispersible superparamagnetic magnetite nanoparticles

A convenient method for preparation of pure and doped yttrium oxide was developed, which is based on irradiation of solutions containing yttrium nitrate and ammonium formate with UV light or accelerated electrons. Solid phase formed under irradiation was consequently calcined at 500?°C or higher temperatures to obtain nanocrystalline yttrium oxide. Addition of small amount of cerium(III) or europium(III) nitrates to irradiated solutions resulted in doping of yttrium oxide with Ce(III) or Eu(III) ions. Under both types of irradiation, the method yields material with high specific surface area, consisting of spherical nanoparticles 25?C100?nm in diameter depending on preparative conditions and post-radiation treatment and with narrow size distribution. In the doped oxides (Y₂O₃:Ce or Y₂O₃:Eu), radioluminescence spectra typical for Ce³⁺ or Eu³⁺ doped oxide structures were observed.     

Surface passivation of phosphorus‐diffused n+‐type emitters by plasma‐assisted atomic‐layer deposited Al2O3

In recent years Al₂O₃ has received tremendous interest in the photovoltaic community for the application as surface passivation layer for crystalline silicon. Especially p‐type c‐Si surfaces are very effectively passivated by Al₂O₃, including p‐type emitters, due to the high fixed negative charge in the Al₂O₃ film. In this Letter we show that Al₂O₃ prepared by plasma‐assisted atomic layer deposition (ALD) can actually provide a good level of surface passivation for highly doped n‐type emitters in the range of 10–100 Ω/sq with implied‐V_oc values up to 680 mV. For n‐type emitters in the range of 100–200 Ω/sq the implied‐V_oc drops to a value of 600 mV for a 200 Ω/sq emitter, indicating a decreased level of surface passivation. For even lighter doped n‐type surfaces the passivation quality increases again to implied‐V_oc values well above 700 mV. Hence, the results presented here indicate that within a certain doping range, highly doped n‐ and p‐type surfaces can be passivated simultaneously by Al₂O₃. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)