Effect of substituents on the curing of liquid crystalline epoxy resin

The synthesis of an aromatic ester based liquid crystalline epoxy resin (LCE) with a substituent in the mesogenic central group is described. Chlorine and methyl groups were introduced as substituents. The curing behaviors of three epoxy resins were investigated using diaminodiphenyl ester as the curing agent. The curing rate and heat of curing of LCE were measured with dynamic and isothermal DSC. The chlorine substituent accelerated the curing of LCE, while the methyl substituent decelerated the curing of LCE. The heat of curing of substituted LCE was diminished compared to LCE with no substituent. Glass transition temperature and elastic modulus of LCE decreased with increasing the size of the substituent. Three liquid crystalline epoxy resins based on aromatic ester mesogenic groups formed a liquid crystalline phase after curing, and the liquid crystalline phase was stable up to the decomposition temperature. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 911–917, 1998     

Highly thermal conductive benzoxazine‐epoxy interpenetrating polymer networks containing liquid crystalline structures

A diamine‐based benzoxazine monomer (Bz) and a liquid crystalline epoxy monomer (LCE) are synthesized, respectively. Subsequently, a benzoxazine‐epoxy interpenetrating polymer network (PBEI) containing liquid crystalline structures is obtained by sequential curing of the LCE and the Bz in the presence of imidazole. The results show that the preferential curing of LCE plays a key role in the formation mechanism of liquid crystalline phase. Due to the introduction of liquid crystalline structures, the thermal conductivity of PBEI increases with increasing content of LCE. When the content of LCE is 80 wt %, the thermal conductivity reaches 0.32 W m^?1 K^?1. Additionally, the heat‐resistance of PBEI is superior to liquid crystalline epoxy resin. Among them, PBEI55 containing equal weight of Bz and LCE has better comprehensive performance. Its thermal conductivity, glass transition temperature, and the 5 % weight loss temperature are 0.28 W m^?1 K^?1, 160 °C, and 339 °C, respectively. By introducing boron nitride (BN) fillers into PBEI55, a composite of PBEI/BN with the highest thermal conductivity of 3.00 W m^?1 K^?1 is obtained. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1813–1821     

Liquid crystalline epoxies bearing biphenyl ether and aromatic ester mesogenic units: Synthesis and thermal properties

Two liquid crystalline epoxies containing biphenyl ether and aromatic ester mesogenic units, oxybis(4,1-phenylene)bis(4-(oxiran-2-ylmethoxy)benzoate)(LCE1) and oxybis(4,1-phenylene) bis(4-(4-(oxiran-2-yl)butoxy)benzoate)(LCE2), were synthesized and characterized. Subsequently, the epoxy monomers were cured with diaminodiphenylsulfone (DDS). From DSC, XRD and POM results, monomers did not show liquid crystalline phase while the cured samples exhibited nematic phase. The cured samples showed good mechanical properties with strength of 99.1MPa and excellent thermal stabilities with high glass transition temperature up to 168.0?°C, 5% weight loss temperature at 343?°C and high char yield of 24.5% at 800?°C. The relationship between thermal conductivity and network structure was discussed in this work. Due to the introduction of mesogenic units into epoxy networks, the cured resins showed high thermal conductivity as high as 0.292?W/(m*K), more than 1.5times higher than conventional epoxy resins. By introducing alumina (Al₂O₃) into LCE1/DDS cured system, composites of LCE1/DDS/Al₂O₃ with the highest thermal conductivity of 1.61?W/(m*K) was obtained with the content of 80?wt% while that of diglycidyl ether of bisphenol A (DGEBA, E51) epoxy resin/DDS/Al₂O₃ was 1.10?W/(m*K). The as-prepared epoxy resins showed high glass transition temperature and excellent thermal stabilities, indicating the potential of application in microelectronics.     

Synthesis and curing of liquid crystalline epoxy resin based on naphthalene mesogen

Aromatic liquid crystalline epoxy resin (LCE) based on naphthalene mesogen was synthesized and cured with aromatic diamines to prepare heat‐resistant LCE networks. Diaminodiphenylester (DDE) and diaminodiphenylsulfone (DDS) were used as curing agents. The curing reaction and liquid crystalline phase of LCE were monitored, and mechanical and thermal properties of cured LCE network were also investigated. Curing and postcuring peaks were observed in dynamic DSC thermogram. LCE network cured with DDE displayed liquid crystalline phase in the curing temperature range between 183 and 260°C, while that cured with DDS formed one between 182 and 230°C. Glass transition temperature of cured LCE network was above 240°C, and crosslinked network was thermally stable up to 330°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 419–425, 1999     

Liquid crystalline epoxy resins by polyaddition of diglycidyl ether of 4,4′-dihydroxybiphenyl and difunctional aromatic compounds

This work is a continuation of the authors' earlier investigations of liquid crystalline epoxy resins prepared from diglycidyl ether of 4,4′-dihydroxybiphenyl (DGE-DHBP), which was used as a mesogenic agent, and aliphatic dicarboxylic compounds, which were used as flexible spacers. In this paper, the synthesis and characterization of liquid crystalline epoxy resins, prepared from DGE-DHBP and difunctional aromatic compounds are described. Three series of liquid crystalline epoxy resins were prepared by chain extension of DGE-DHBP with isomeric hydroxybenzoic and benzenedicarboxylic acids as well as diphenols. An isophthalic-terminated polyether was applied to decrease the temperature of phase transitions. The syntheses were carried out by catalytic polyaddition in the melt. Triphenylphosphine was applied as the catalyst. The resulting epoxy resins were investigated by DSC, polarizing microscope as well as by X-ray and IR spectroscopy. The phase transition temperatures and the type of mesophase of the resulting products depend on the character of the functional groups in the chain extender and on the position of the functional groups in the aromatic ring. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 21–29, 1998     

Dimeric liquid‐crystalline epoxyimine monomers: Influence of dipolar moments on mesomorphic behavior and the formation of liquid‐crystalline thermosets

We examine some of the structural aspects that influence the mesomorphic behavior of liquid‐crystalline dimeric epoxy resins with imine groups in the mesogens. We synthesized two new series of monomers and compared them with previously synthesized monomers. Compared with previously studied series, the imine group in the new monomers is oriented differently with respect to the ether and ester groups linked to the end of the mesogenic unit. Our results confirmed the importance of polarization of the mesogenic groups and the presence of an ester group in the inner position in the formation of smectic mesophases. By curing with primary and tertiary amines, we demonstrate that these two requirements are necessary if liquid‐crystalline thermosets are to be obtained with different degrees of order. These studies were carried out with differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1465–1477, 2003     

Liquid crystal elastomer actuators: Synthesis,alignment, and applications

Liquid crystal elastomers (LCEs) are a unique class of materials which combine rubber elasticity with the orientational order of liquid crystals. This combination can lead to materials with unique properties such as thermal actuation, anisotropic swelling, and soft elasticity. As such, LCEs are a promising class of materials for applications requiring stimulus response. These unique features and the recent developments of the LCE chemistry and processing will be discussed in this review. First, we emphasize several different synthetic pathways in conjunction with the alignment techniques utilized to obtain monodomain LCEs. We then identify the synthesis and alignment techniques used to synthesis LCE‐based composites. Finally, we discuss how these materials are used as actuators and sensors. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 395–411     

New liquid‐crystalline thermosets from liquid‐crystalline bisazomethynic epoxy resins with naphthylene disruptors in the central core

We synthesized novel epoxy‐terminated monomers on the basis of imine groups with spacers of different lengths between mesogens and reactive groups and examined their mesogenic properties. Their reaction with primary aromatic diamines and tertiary amines was carried out to investigate the formation of liquid‐crystalline thermosets. We explored how the curing conditions and the structures of the monomers and amines affected the formation of ordered networks. The special symmetry of a 1,5‐disubstituted naphthalene unit in the central core led to nematic mesophases in the pure liquid‐crystalline epoxy resins, and thermosets with locked nematic textures were obtained in all cases, regardless of the length of the spacer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1536–1544, 2003     

Thiol‐acrylate main‐chain liquid‐crystalline elastomers with tunable thermomechanical properties and actuation strain

The purpose of this study was to investigate the influence of cross‐linking on the thermomechanical behavior of liquid‐crystalline elastomers (LCEs). Main‐chain LCE networks were synthesized via a thiol‐acrylate Michael addition reaction. The robust nature of this reaction allowed for tailoring of the behavior of the LCEs by varying the concentration and functionality of the cross‐linker. The isotropic rubbery modulus, glass transition temperature, and strain‐to‐failure showed strong dependence on cross‐linker concentration and ranged from 0.9 MPa, 3 °C, and 105% to 3.2 MPa, 25 °C, and 853%, respectively. The isotropic transition temperature (T_i) was shown to be influenced by the functionality of the cross‐linker, ranging from 70 °C to 80 °C for tri‐ and tetra‐functional cross‐linkers. The magnitude of actuation can be tailored by controlling the amount of cross‐linker and applied stress. Actuation increased with increased applied stress and decreased with greater amounts of cross‐linking. The maximum strain actuation achieved was 296% under 100 kPa of bias stress, which resulted in work capacity of 296 kJ/m³ for the lowest cross‐linked networks. Overall, the experimental results provide a fundamental insight linking thermomechanical properties and actuation to a homogenous polydomain nematic LCE networks with order parameters of 0.80 when stretched. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 157–168     

Physically crosslinked elastomers prepared from oligomeric polyolefins with mesogenic units

Two ABA‐type liquid crystalline oligomers were newly synthesized, where A was a mesogenic group and B was polyolefin whose molecular mass was 2470. The A segment was prepared from p‐hydroxyl benzoic acid and terephalic acid. The elastomeric films, whose moduli at 20% elongation were 0.4–1.0 MPa, were obtained by solution casting of the ABA‐type oligomers. Dynamic mechanical analysis and differential scanning calorimetry measurement showed the glass transition of amorphous polyolefin segments, the melting of mesogenic groups, and the meso‐to‐isotropic transition of liquid crystalline phase. The formation of microphase‐separated structures was confirmed by a small‐angle X‐ray scattering (SAXS) measurement. The presence of hexagonal cylinder domains, which were attributed to the aggregation of mesogenic groups in the polyolefin matrix, was also detected by SAXS. These liquid crystalline oligomers showed anisotropy under the crossed Nicoles, and the textures were observed to be nematic. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2247–2253, 2000     

Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

Synthesis and characterization of a novel liquid‐crystalline epoxy resin combining biphenyl and aromatic ester‐type mesogenic units

A novel liquid‐crystalline epoxy resin combining biphenyl and aromatic ester‐type mesogenic units, diglycidyl ether of 4,4′‐bis(4‐hydroxybenzoyloxy)‐3,3′,5,5′‐tetramethyl biphenyl, was synthesized. Its spectroscopic structure, thermal properties, and phase structures were investigated with NMR, differential scanning calorimetry (DSC), and polarized light microscopy (PLM), respectively. The curing agent, diaminodiphenylsulfone, was chosen to investigate the curing behavior by means of DSC and PLM during isothermal and nonisothermal processes. Only one exothermal peak appeared in the isothermal DSC curves. Birefringence was also observed during the curing processes and preserved after postcuring. Compared with short rigid‐rod and flexible epoxies, the cured liquid‐crystalline epoxy resin that was obtained displayed special thermal stability according to thermogravimetric analysis because of its long rigid‐rod mesogenic unit and bulky methyl groups. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 727–735, 2007     

Thermosets containing benzoxazole units: Liquid‐crystalline behavior and thermal conductivity

A series of liquid‐crystalline (LC) thermosetting monomers containing benzoxazole (BO) units were synthesized to evaluate the thermal conductivities (λ) of their cured resins. A BO‐containing bisnadiimide system showed LC behavior during the heating process. However, the thermal cure of the bisnadiimide provided a film without optical anisotropy; consequently, the cured film exhibited normal levels of thermal diffusivity (α) and thermal conductivity (λ). The disappearance of the optically anisotropic ordered structures during thermal curing is likely related to the temperature gaps between the cure reaction ranges and LC ranges (T_cure‐T_LC gap). In addition, epoxy resins consisting of bisepoxides and BO‐containing diamines were investigated because of their high flexibility in terms of molecular design that can be used to reduce the T_cure‐T_LC gap. The combination of a terephthalylidene‐type bisepoxide and BO‐containing diamine with a controlled flexible chain length resulted in the smallest T_cure‐T_LC gap among the epoxy resin systems examined herein. The cured epoxy resin film exhibited an appreciably increased λ value (0.257 W m^?1 K^?1) in the Z direction. This indicated the importance of the T_cure‐T_LC gap for enhancing the α and λ values of the cured films. This epoxy resin system was cured under a continuous DC electric field during polarizing optical microscopy. A prompt response with deformation of the LC domains was observed in harmony with temporal ON/OFF switching of the DC power supply. As expected, the cured film exhibited a significantly enhanced λ value (0.488 W m^?1 K^?1) in the Z direction.     

Fracture toughness and fracture mechanism of liquid‐crystalline epoxy resins with different polydomain structures

Liquid‐crystalline (LC) epoxy resins were cured at different temperatures to obtain polydomain LC phase–cured resins. The cured resins had polydomain structures with a nematic LC phase and their domain diameters differed depending on the curing temperatures. The relationship between the domain diameter and fracture toughness of the diglycidyl ether of terephthalylidene‐bis‐(4‐amino‐3‐methylphenol) (DGETAM)/m‐phenylenediamine (m‐PDA) systems with the nematic phase and the previously reported smectic LC phase structures was investigated. It was clarified that the highly ordered LC structure (smectic phase) in each domain could improve the fracture toughness. In addition, the changes in the network orientation of the DGETAM/m‐PDA systems were evaluated by a mapping of the microscopic infrared dichroism in the fracture process and their toughening mechanism was suggested. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

腰接型侧链液晶弹性体研究进展

液晶弹性体是交联型液晶大分子,兼具液晶取向有序性和交联聚合物熵弹性等特性,在传感器、触发器、微流体装置和仿生器件等方面具有很好的应用前景.制备液晶弹性体的微结构,探索其独特的刺激响应性,是目前液晶弹性体研究的重要方向.侧链液晶弹性体的液晶相态类型取决于其液晶基元和主链的连接方式.腰接型侧链液晶弹性体倾向于形成向列型液晶相,具有较快的响应速度和形变程度,是一类独特的液晶弹性体.本文重点介绍腰接型液晶弹性体微结构(如微米柱、微米线等)的制备;利用金纳米粒子的光热转换效应,实现液晶弹性体光响应性的新途径;以及腰接型侧链液晶弹性体仿生微结构的功能性等.同时还对该领域的发展前景进行了展望.     

Evolution of structure and properties of a liquid crystalline epoxy during curing

The evolution of structure, and thermal and dynamic mechanical properties of a liquid crystalline epoxy during curing has been studied with differential scanning calorimetry (DSC), polarized optical microscopy, x-ray scattering, and dynamic mechanical analysis. The liquid crystalline epoxy was the diglycidyl ether of 4,4′-dihydroxy-α-methylstilbene (DGEDHMS). Two curing agents were used in this study: a di-functional amine, the aniline adduct of DGEDHMS, and a tetra-functional sulfonamido amine, sulfanilamide. The effects of curing agent, cure time, and cure temperature have been investigated. Isothermal curing of the liquid crystalline epoxy with the di-functional amine and the tetra-functional sulfonamido amine causes an increase in the mesophase stability of the liquid crystalline epoxy resin. The curing also leads to various liquid crystalline textures, depending on the curing agent and cure temperature. These textures coarsen during the isothermal curing. Moreover, curing with both curing agents results in a layered structure with mesogenic units aligned perpendicular to the layer surfaces. The layer thickness decreases with cure temperature for the systems cured with the tetra-functional curing agent. The glass transition temperature of the cured networks rises with increasing cure temperature due to the increased crosslink density. The shear modulus of the cured networks shows a strong temperature dependence. However, it does not change appreciably with cure temperature. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2363–2378, 1997     

Shape recovery liquid crystal elastomer synthesized by melt‐polycondensation

A novel liquid crystal elastomer (LCE) synthesized by melt polymerization, which exhibits the capacity of shape memory, is reported here for the first time. The method of synthesize the shape memory LCE has been explored. A facile two‐step method to synthesize these anisotropic materials to realize reversible shape change behavior is reported. The first reaction is the addition of nematic liquid crystal molecules to form a kind of liquid crystal polymer. Subsequently, the polymer is crosslinked to trap the order of the liquid crystal into a crosslinked LCE. The LCE exhibits liquid crystalline behavior which has shape memory with excellent fixity and recovery. Its shape memory and actuating properties also have been studied. When reheating the LCE to 165 °C, the shape will recover. The main chains and crosslinked bonds of the LCE contain ester groups, which are sensitive to alkaline and acidic condition. It turns out that the LCE is intact under acidic condition, but it can be degraded under alkaline condition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 389–394     

Synthesis and characterization of side‐chain liquid‐crystalline poly(ethyleneimine)s with cyanobiphenyl groups

A series of polyethyleneimine‐based side‐chain liquid‐crystalline polymers substituted with different ratios of cyanobiphenyl as pendent mesogenic groups has been synthesized in which the spacer length varies between two and six methylene units. The structures of the synthesized polymers are confirmed by infrared and ¹H nuclear magnetic resonance spectroscopy. The thermal properties of these polymers have been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. The results indicate that the thermal behaviour of the polymers is strongly dependent on the degree of substitution. Polymers containing more than 69% of mesogenic groups exhibit nematic‐type thermotropic liquid‐crystalline behaviour with schlieren textures. Below this limit, the polymers are amorphous. Polymers with a higher degree of substitution present the crystalline states. The phase transition temperatures increase and the mesomorphic temperature ranges widen with increasing degree of substitution. The clearing temperatures decrease as the spacer length increases. An odd–even effect in the clearing temperatures is observed and the odd members display the higher values.     

Synthesis of Liquid Crystalline Epoxy Oligomers: Effect of Molecular Weight on the Phase Behavior

A series of epoxy‐terminated liquid crystalline oligomers with different molecular weights having α‐methylstilbene as the mesogenic unit were synthesized and characterized by means of ¹H NMR and FT‐IR spectroscopy, differential scanning calorimetry (DSC), polarized‐light optical microscopy (POM) and X‐ray diffraction. The effect of the initial ratio between epichlorohydrin and diol on the molecular weight was not significant enough to change the thermal behavior of the oligomers essentially. The copolymerization of epoxy‐ and hydroxyl‐terminated comonomers yielded high‐molecular weight oligomer, whose enantiotropic liquid crystalline character was proved by means of DSC, POM and X‐ray diffraction.     

Thermal recordable novel cholesteric liquid crystalline polyacrylates containing various chiral moieties

To investigate the effect of spacer length and linkages between the rigid mesogenic core and the terminal group on the molecular interaction and physical properties of polymers, two series of novel side chain liquid crystalline polyacrylates were synthesized. These were composed of liquid crystalline monomers with six or eleven methylene segments as spacers, and chiral monomers end capped with menthyl or cholesteryl groups. Liquid crystalline phases of the polymers were investigated using differential scanning calorimetry and polarized optical microscopy, and confirmed with X‐ray diffractometry. Color image recording of the synthesized polymer films was achieved using a thermal treatment, and then fixed by quenching. This investigation demonstrates that the introduction of carbonate linking groups between the rigid mesogenic core and terminal group decreases both the lateral molecular interaction and thermal stability of the liquid crystalline polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6214–6228, 2008