One‐pot solvent‐free synthesis of novel functionalized ethyl 2‐(alkylimino)‐4‐methyl‐3‐(alkanoyl)‐2,3‐dihydrothiazole‐5‐carboxylates

A green and efficient one‐pot two‐step synthesis of ethyl 2‐(alkylimino)‐4‐methyl‐3‐(alkanoyl)‐2,3‐dihydrothiazole‐5‐carboxylates from the reaction between acyl chlorides, ammonium thiocyanate, primary alkylamines, and ethyl 2‐chloroacetoacetae under mild, solvent‐ and catalyst‐free conditions at room temperature is presented. This efficient and straightforward technique gave the expected products in good to high yields in 2–4 hr without the creation of any by‐product in all reactions.     

Efficient One‐pot Synthesis of Alkyl 3‐(alkyl)‐4‐methyl‐2‐thioxo‐2,3‐dihydrothiazole‐5‐carboxylates in a Multi Component Reaction

A simple and efficient one‐pot synthesis of alkyl 2‐(alkyl)‐4‐methyl‐2‐thioxo‐2,3‐dihydrothiazole‐5‐carboxylates from the reaction of primary alkylamines and carbon disulfide in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst, good yields, mild conditions and short times for reaction.     

A Facile and One‐pot Synthetic Route to Functionalized Ethyl 3‐(Alkanoyl)‐2‐(alkyl imino)‐2,3‐dihydrothiazole‐4‐carboxylate Derivatives under Mild,Solventand Catalyst‐free Conditions

A new one‐pot, four‐component synthetic rout is reported for the preparation of functionalized N‐acyl‐2alkylimino‐2,3‐dihydrothiazole derivatives from the reaction between acid chlorides, ammonium thiocyanate, primary alkylamines, and ethyl bromopyruvate under mild, solvent‐ and catalyst‐free conditions at room temperature. This completely green and efficient straight forward procedure led to the desired products in good to high yields without any need to catalyst or solvent assistance and no by product was observed in all the reactions     

A simple synthesis of 5‐ethoxycarbonyl‐6‐phenyl‐1,3‐dioxin‐4‐ones and ethyl 3‐benzoyl‐4‐oxo‐2,6‐diphenylpyran‐5‐carboxylate

4‐Ethoxycarbonyl‐5‐phenyl‐2,3‐dihydrofuran‐2,3‐dione 1 reacts with aldehydes via the acylketene intermediate 2 giving the 1,3‐dioxin‐4‐ones 3a‐e and the 1,4‐bis(5‐ethoxycarbonyl‐4‐oxo‐6‐phenyl‐4H‐1,3‐dioxin‐2‐yl)benzene 4 , and a one step reaction between dibenzoylmethane and oxalylchloride gave 3,5‐dibenzoyl‐2,6‐diphenyl‐4‐pyrone 7 . The reaction of 1 with dibenzoylmethane, a dicarbonyl compound, provided ethyl 3‐benzoyl‐4‐oxo‐2,6‐diphenylpyran‐5‐carboxylate derivative 9 . Compound 9 was converted into the corresponding ethyl 3‐benzoyl‐4‐hydroxy‐2,6‐diphenylpyridine‐5‐carboxylate derivative 10 via its reaction with ammonium hydroxyde solution in 1 ‐butanol.     

4‐Bromo‐3‐methyl‐1‐phenylpyrazole in Heterocyclic Synthesis: Unexpected Polysubstituted Pyrazole Derivatives

Unexpected 4,4′‐dipyrazolomethylidene ( 7 ), 4‐amino‐3a‐bromo‐3‐methyl‐1‐phenylpyrazolo[3,4‐b]pyridin‐6‐thione ( 9 ), 4,4′‐dipyrazolyl ( 18 ), ethyl 4‐(3‐methyl‐1‐phenylpyrazole‐4‐yl)fuoro[2,3‐c]pyrazole‐4‐carboxylate ( 25 ), as well as the expected fuoro[2,3‐c]pyrazole derivatives ( 15 ), ( 20 ) and ( 28 ) were isolated from a one‐pot reaction of 4‐bromo‐3‐methyl‐1‐phenylpyrazole ( 1 ) with some readily available reagents.     

Study of 1,3‐Dipolar Cycloaddition and Ring Contraction of New 1,4‐Phenylene‐bis[1,5]benzothiazepine Derivatives

Some 1,4‐phenylene‐bis[1,2,4]oxadiazolo‐[5,4‐d][1,5]benzothiazepine derivatives ( 4a , 4b , 4c ) were synthesized by 1,3‐dipolar cycloaddition reaction of benzohydroximinoyl chloride with 1,4‐phenylene‐bis(4‐aryl)‐2,3‐dihydro[1,5]benzothiazepine ( 2a , 2b , 2c ); meanwhile, compounds 2a , 2b , 2c also occurred ring contraction under acylating condition to obtain bis[2‐aryl‐2′‐(β‐1,4‐phenylenevinyl)‐3‐acetyl]‐2,3‐dihydro[1,5]benzothiazoles ( 3a , 3b , 3c ). The structures of some novel compounds were confirmed by IR, ¹H‐NMR, elemental, and X‐ray crystallographic analysis.     

Synthesis of N‐aryl‐2‐amino‐4‐oxo‐3,4‐dihydrothieno[2,3‐d]pyrimidine‐6‐carboxamides

Synthetic routes for the preparation of methyl 2‐amino‐4‐methoxythieno[2,3‐d]pyrimidine‐6‐carboxylate (4) ‐ useful intermediate for lipophilic and classical antifolates from 2‐amino‐4,6‐dichloropyrimidine‐5‐car‐baldehyde (1) have been studied. It has been shown that more efficient synthesis of compound 4 includes the preparation of 4‐methoxy derivative 7 and subsequent tandem substitution/annulation reaction with methyl mercaptoethanoate in dimethylformamide in the presence of potassium carbonate and molecular sieves 4 Å. Compound 4 was used for the synthesis of N‐aryl 2‐amino‐4‐oxo‐3,4‐dihydrothieno[2,3‐d]‐pyrimidine‐6‐carboxamides 10a‐c, including an analog of folic acid with amide bridge ‐ N‐(4‐{[(2‐amino‐4‐oxo‐3,4‐dihydrothieno[2,3‐d]pyrirnidin‐6‐yl)carbonyl]amino}‐benzoyl)‐L‐glutamic acid (10c) .     

Unexpected Ring Enlargement of 2‐Hydrazono‐2,3‐dihydro‐1,3‐thiazoles to 1,3,4‐Thiadiazines

The cyclization of thiosemicarbazide with α‐bromoacetophenone can result in the formation of isomeric 1,3,4‐thiadiazines and two different thiazoles. We studied the use of 4‐methyl‐ and 4‐ethylthiosemicarbazide as dinucleophilic building blocks. In this context, we observed an unprecedented rearrangement of a 2‐hydrazono‐2,3‐dihydrothiazole to a 1,3,4‐thiadiazine. While ring contractions of 1,3,4‐thiadiazines to thiazoles are quite common, ring enlargements are new. The course of the reaction depends on the substitution pattern of the substrate.     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Synthesis of 2‐Thioxohydropyridine‐3‐Carbonitrile, 2‐Alkylthiopyridine,Thienopyridine, Pyrazolopyridine Derivatives and Their Theoretical Calculations

Cyanothioacetamide ( 1 ) reacted with but‐2‐enal ( 2 ) to give the corresponding 4‐methyl‐2‐sulfanylpyridine‐3‐carbonitrile ( 7 ) which was used as a good starting material for the synthesis of 1‐(3‐amino‐4‐methylthieno[2,3‐b]pyridin‐2‐yl)ethan‐1‐one ( 10 ), 3‐amino‐4‐methylthieno[2,3‐b]pyridine‐2‐carboxamide ( 15 ), 3‐amino‐4‐methylthieno[2,3‐b]pyridine‐2‐carboxylate ( 18 ) and 3‐amino‐4‐methylthieno[2,3‐b]pyridin‐2‐ylarylketone 25a‐c through its reactions with each of (1‐chloroacetone ( 8 ), 3‐chloropentane‐2,4‐dione ( 11 ) or ethyl 2‐chloro‐3‐oxo‐butanoate ( 19 )), 2‐chloroacetamide ( 13 ), ethyl 2‐chloroacetate ( 16 ) and 2‐bromo‐1‐arylethan‐ 1 ‐one 23a‐c , respectively. Considering the data of elemental analyses, IR, ¹HNMR, mass spectra and theoretical calculations, structures of the newly synthesized heterocyclic compounds were elucidated.     

Syntheses of New Unsymmetrical 2,5‐Disubstituted‐1,3,4‐oxadiazoles and 1,2,4‐Triazolo[3,4‐b]‐1,3,4‐thiadiazoles Bearing Thieno[2,3‐c]pyrazolo Moiety

New series of (thieno[2,3‐c]pyrazolo‐5‐yl)‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazoles 10a , 10b , 10c and (thieno[2,3‐c]pyrazol‐5‐yl)‐1,3,4‐oxadiazol‐3(2H)‐yl)ethanones 6a , 6b , 6c has been synthesized from thieno[2,3‐c]pyrazole‐5‐carbohydrazide 3 by multistep reaction sequence. (5‐Aryl‐1,3,4‐oxadiazol‐2‐yl)‐1H‐thieno[2,3‐c]pyrazoles 4a , 4b , 4c were also synthesized from thieno[2,3‐c]pyrazole‐5‐carbohydrazide 3 by cyclization with various aromatic carboxylic acids. The hydrazide 3 was obtained by reaction of thieno[2,3‐c]pyrazole‐5‐carboxylate 2 with hydrazine hydrate in good yield, and compound 2 was obtained by the reaction of 5‐chloro‐3‐methyl‐1‐phenyl‐1H‐pyrazole‐4‐carbaldehyde 1 and 2‐ethyl thioglycolate in presence of sodium alcoholate in good yield.     

Attempted synthesis of ethyl 3,4‐dihydro‐2H‐1,4‐benzoxazine‐3‐carboxylate and 3‐acetate derivatives

Ethyl 3,4‐dihydro‐2H‐1,4‐benzoxazine‐3‐carboxylate derivatives 2 were obtained and isolated in low yields from the condensation of 2‐aminophenol and ethyl 2,3‐dibromopropanoate. They can be obtained by hydrogenation of ethyl 2H‐1,4‐benzoxazine‐3‐carboxylate in satisfactory yield. Using 2‐iminophenol did not direct the condensation with ethyl 2,3‐dibromopropanoate towards 2 but was fruitfull for the preparation of ethyl 2‐(4‐benzyl‐3,4‐dihydro‐2H‐1,4‐benzoxazin‐3‐yl)acetate from ethyl bromocrotonate.     

Syntheses of substituted pyrrolo[2,3‐d]imidazole‐5‐carboxylates and substitued pyrrolo[3,2‐d]imidazole‐5‐carboxylates

Starting from readily available p‐substituted‐benzylamines a series of ethyl 2‐alkylthio‐1‐substituted‐ben‐zylpyrrolo[2,3‐d]imidazole‐5‐carboxylates was prepared. In addition, starting from 2‐alkyl‐4(or 5)‐formylimidazoles and methyl 4′‐bromomethylbiphenyl‐2‐carboxylate a series of methyl substituted‐pyrrolo[2,3‐d]imidazole‐5‐carboxylates and methyl substituted‐pyrrolo[3,2‐d]imidazole‐5‐carboxylates was prepared.     

An Unexpected and Green Synthetic Protocol for Ethyl 1‐Aroyl/Aroylmethyl‐5‐methyl‐3‐methylthiopyrazole‐4‐carboxylates: High Regioselectivity in Alkylation and Acylation Reactions between N‐1 and N‐2 of a Pyrazole Ring

Two series, totaling twelve, of new compounds, ethyl 1‐aroyl/(aroylmethyl)‐5‐methyl‐3‐methylthiopyrazole‐4‐carboxylates ( 5 / 6 ), have been synthesized via highly regioselectively acylation and alkylation reactions of ethyl 3‐methyl‐5‐methylthio‐1 H‐pyrazole‐4‐carboxylate ( 2a ) with aroyl chloride ( 3 ) and eco‐friendly reagents alpha‐tosyloxysubstituted acetophenones ( 4 ), respectively, and a green protocol has been developed. The acylation reactions were carried out under ultrasound irradiation, and the alkylation reactions were under microwave irradiation and ultrasound irradiation, respectively. Conventional reaction conditions, as well as the use of alpha‐bromosubstituted acetophenone ( 4 ′) have also been applied in the synthesis of some randomly selected compounds in both series and have generated identical compounds correspondingly. Unexpected structures of compounds were unambiguously determined by X‐ray crystallographic analysis.     

Lithiation of N‐protected‐dihydro‐1,4‐benzoxaziness

Lithiation of N‐protected‐2,3‐dihydro‐1,4‐benzoxazines is described. Lithiation of N‐(tert‐butoxycarbonyl)‐2,3‐dihydro‐1,4‐benzoxazine ( 1 ) with BuLi/TMEDA occurred in the α‐position to nitrogen on the heterocyclic ring, leading to the unexpected ring‐opened product 3 . On the other hand, lithiation of N‐methyl‐2,3‐dihydro‐1,4‐benzoxazine ( 4 ) took place at the oxygen‐adjacent ortho‐position of the aromatic ring.     

Synthesis and NMR‐Spectroscopic Investigations with 4‐Chloroacyl‐1‐phenylpyrazolin‐5‐ones

The synthesis of various 4‐acylpyrazolones bearing in the acyl moiety either a terminal chloro‐substituent or a terminal ortho‐chlorophenyl group was achieved by reaction of 3‐methyl‐1‐phenyl‐2‐pyrazolin‐5‐one (tautomer to 3‐methyl‐1‐phenyl‐1H‐pyrazol‐5‐ol) with the corresponding acid chloride using calcium hydroxide / 1,4‐dioxane. In one case (reaction with chlorobutanoyl chloride) a spontaneous cyclization occurred leading to the corresponding oxepino[2,3‐c]pyrazole. Detailed NMR spectroscopic investigations with all prepared compounds were performed.     

Studies towards the Synthesis of Alkyl N‐(4‐Nitrophenyl)‐3/2‐oxomorpholine‐2/3‐carboxylates

The syntheses of methyl 4‐(4‐nitrophenyl)‐3‐oxomorpholine‐2‐carboxylate ( 3a ) and ethyl 4‐(4‐nitrophenyl)‐2‐oxomorpholine‐3‐carboxylate ( 5b ), important building blocks for the synthesis of factor Xa inhibitor rivaroxaban analogs with potential dual antithrombotic activity, via Rh₂(OAc)₄‐catalyzed O? H and N? H carbene insertion reactions are described.     

Preparation of Mesoporous 1,4‐Phenylene‐silica Nanorings through a Dual‐templating Approach

Mesoporous 1,4‐phenylene‐silica nanorings were prepared using cetyltrimethylammonium bromide (CTAB) and (S)‐2‐methyl‐1‐butanol as a chiral dopant in concentrated aqueous NH₃ solutions. Transmission electron microscopy images of the samples indicated that the nanorings were formed by bending nanorods 360°. With increasing the stirring speed or the (S)‐2‐methyl‐1‐butanol/CTAB molar ratio, the morphologies of mesoporous 1,4‐phenylene‐silicas changed from helical nanofibers to nanorings, and then to nano‐saddles. Circular dichroism spectra of these hybrid silicas indicated that they were chiral.     

Reaction of Ketene Dithioacetals with Pyrazolylcarbohydrazide： Synthesis and Biological Activities of Ethyl 5-Amino-1-（5＇-methyl-1 ＇-t-butyl-4＇-pyrazolyl）carbonyl-3-methylthio-1 H-pyrazole-4-carboxylate

The title compound, C16H23N5O3S, ethyl 5-amino-1-(5‘-methyl-1‘-t-butyl-4‘-pyrazolyl)carbonyl-3-methylthio-1H-pyrazole-4-carboxylate (5) has been synthesized by the treatment of ethyl 2-cyano-3,3-dimethylthioacrylate with 1-t-butyl-5-methyl-4-hydrazinocarbonylpyrazole (4) in refluxed ethanol. The possible mechanism of the above reaction was also discussed. The results of biological test show that the title compound has fungicidal and plant growth regulation activities.     

Reactions of Imidoyl Isoselenocyanates with Aromatic 2‐Amino N‐Heterocycles and 1‐Methyl‐1H‐imidazole

The reaction of N‐phenylimidoyl isoselenocyanates 1 with 2‐amino‐1,3‐thiazoles 10 in acetone proceeded smoothly at room temperature to give 4H‐1,3‐thiazolo[3,2‐a] [1,3,5]triazine‐4‐selones 13 in fair yields (Scheme 2). Under the same conditions, 1 and 2‐amino‐3‐methylpyridine ( 11 ) underwent an addition reaction, followed by a spontaneous oxidation, to yield the 3H‐4λ⁴‐[1,2,4]selenadiazolo[1′,5′:1,5] [1,2,4]selenadiazolo[2,3‐a]pyridine 14 (Scheme 3). The structure of 14 was established by X‐ray crystallography (Fig. 1). Finally, the reaction of 1‐methyl‐1H‐imidazole ( 12 ) and 1 led to 3‐methyl‐1‐(N‐phenylbenzimidoyl)‐1H‐imidazolium selenocyanates 15 (Scheme 4). In all three cases, an initially formed selenourea derivative is proposed as an intermediate.